Print Report of cash Memo

hello and hi
me have a report of cash memo page size 12 by 13.8 cm ,using printer dot matrix
problem is that when me print a single page , printer not stop , its go to end of next page its mean printer print at portarit size page ,
any body help me how me ll handel the printer
any one has a build example pls send me at [email protected] or send me link
regard
mahr

please use the report forum
Reports

Similar Messages

Print Report of cash Memo OR Page settings for cutsheet papers

hello and hi
me have a report of cash memo page size 12 by 13.8 cm (5 by 4.8 inch) ,using printer dot matrix
problem is that when me print a single page , printer not stop , its go to end of next page its mean printer print at portarit size page ,
any body help me how me ll handel the printer
any one has a build example pls send me at [email protected] or send me link
regard
mahr

Hi,
You need to modify the prt file that your character mode report is using.
the name of the prt file is the value in DESFORMAT system property in your report.
Br,
Gouri Sankar

Standard report for cash book & Bank book

Hi Guru's,
Please tell me the transaction codes for reporting cash journal & Bank book in standard sap
Thanks.
Santosh Rothe

Hi,
For standard report for cash book & Bank book
Cash Journal : T.code FBCJ
Report - S_ALR_87012309 - Print Cashbook
You can also try this report
J3RFCASH15 - Cash Journal Reports
For Bank Book
There is no standard report for Bank Book
S_ALR_87012348 - Cashed Checks per Bank Account
S_ALR_87012349 - Outstanding Checks Analysis per G/L Account and Vendor
Please let me know if you need more information.
Regards
Sridhar M

"Print report REKORD 80 has not selected any data for correspondence SAP18"

When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John

HI,
John.
please refer the following link.
correspondence type
Regards,
satish

Cancelled POs not appearing in isupplier PO Print Report

Hi All,
I am using oracle apps 11.5.10 version.My problem is that PO print report is not printing all the cancelled Purchase Orders.Its printing only the last Purchase Order which is cancelled.
Steps to reproduce-
1. create a multi line req in iproc..submit and on approval PO gets created.
2.from isupplier run Printed PO report.You will see all the lines.
3. Cancel 1st line in iproc-let it revision.run report from isupplier.You'll see all the lines along with one line that is cancelled.
4.Cancel 2nd lines in iproc.let it revision.run report from isupplier.You will see all the lines and the new cancelled line as well.But the Cancelled line1 will not be seen.
5.Again cancel 3rd line.When you print PO in isupplier.You will see all lines+3rd cancelled line.But the above two cancelled Lines 1 and 2 will b missing.
Note- we have modifed the xslfo and po_lines_xml for some other changes.I have reverted the changes made in po_lines_xml but still facing the same issue.
Please help.

Hi,
Please check in transaction SXMB_MONI can found related information why it not transfer to SRM.
Also check the purchasing data of the PO.
Thanks,
prasad.s

Report Generation Toolkit V9.0.0 : Print Report.vi doesnt print

Hi,
i have migrated my Labview 8.5 Project with Report Generation Toolkit V1.1.2 to a Labview 2009 System with Report Generation Toolkit V9.0.0.
In this Project I use the Report Generation Toolkit for printing out a Standard Report with e few Tables and Graphs.
Now the VI Print Report.vi delivers the Error -41002 with the Text "Invalide Printer Name". I have, of course installed the propper Printer on the machine.
I don´t connect a string to the "Printer name" input of the VI, because i want to use the default printer.
In my oppinion, there´s a bug in the Print Report.vi: if you don´t wire the "Printer name" input, the vi should use the default printer, but in this case the vi connects the empty input string to the input of the method node it calls.
I fixed this bug, but the method node still returns the same error.
any ideas?
Thanks!
Solved!
Go to Solution.

Thank you for the link!
For some reasons i can´t find this specific article in the knowledge base (my browser is always rerouted to the german version of ni.com, because i am in Austria). I tried to search with the exact title of this article, and the error message string, but no results...
I have also installed Labview 8.5 and the "old" Toolkits on my new computer in addition to Labview 2009 and the "new" Toolkits and tested my program in 8.5. Here i got an error mentioning the margins and i had to change the margin settings for printing out, then in worked.
After reading the article, i have applied the same changes for the margins in the 2009-version of my program and it works too!
Problem solved!
Thank you very much!
PS:
I first wrote, that there´s maybe a bug in the new version of the Print Report.vi, but i´ve compared it with the old version and it seems to be no bug, sorry!
After all I decided to stay with Labview 8.5 for now, because of another problem:
it´s not possible to "save for previous version" from LV2009 to LV8.5 directly.
Laview crashes, when a VI contains an event structure as i found out by searching through the "known issues", and i have a lot of VIs with event structures!
I have to have the possibility to save my Labview projects for 8.0 and 8.5. The only way is to save for 8.6 and then save from 8.6 to 8.5.
That´s nasty and time-consuming!
Maybe a future update will solve this problem (without producing new ones)

Printing report that has a parameter with multiple values crashes jvm

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

AP Cheque Printing Report

Hi All,
Can anybody help me out to do the AP cheque printing report using XML Publisher.
Followings are the steps I did.
1. Create rdf and register in APPS.
Executable is defined in Customization AP application
Concurrent Program is in Payables application.
2. Create Data Definition and Template in XML Publisher administrator in Payables.
3. Attached the Concurrent program in AP Format set up.
4. Make the Payment, The report is calling and showing completed normal but the output is not coming.
5. Then I run the XML report Publisher and pass the request id then the output is coming as PDF.
But the requirement is when we make the payment , The output should come and it will go to the printer for printing..
Please help me where I made the mistake.
or please guide me what approach I should follow.
Thanks in Advance.
Pradipta

Here is my code:
function AfterReport return boolean is
vrequest_id number;
v_success BOOLEAN;
v_printer fnd_concurrent_requests.printer%TYPE;
v_print_style fnd_concurrent_requests.print_style%TYPE;
begin
-- Set up printer for the following reports
-- Get the printer and style for this report for use with the following reports select printer, print_style
into v_printer, v_print_style
from fnd_concurrent_requests
where request_id = :P_CONC_REQUEST_ID;
srw.message(999, 'Print options: ' || v_printer || '/' || v_print_style);
v_success := fnd_request.set_print_options (v_printer
,v_print_style
,1
,TRUE
,'N'
,'SKIP'); IF NOT v_success THEN
srw.message(999, 'Failure to set print options'); ELSE
srw.message(999, 'Print options set'); end if;
-- Submit the XML Report Publisher request to complete the printed Dunning Letters
vrequest_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:P_CONC_REQUEST_ID,
222, -- Receivables
'XX_ARDLPPRT_RPT',
'en', 'N', 'RTF', 'PDF', NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
-- commit to submit request
commit;
IF vrequest_id = 0 THEN -- if request id
srw.message(999, 'Failure to submit Concurrent Request to Print Dunning Letters');
ELSE
srw.message(999, 'request id ' || to_char(vrequest_id) || ' submitted');
end if;
-- Original Afterreport trigger stuff
SRW.DO_SQL('alter session set sql_trace false');
return (TRUE);
end;

Report for Cash flow (fund flow from Bank GL)

Hi Expert,
I would like to have your advice on how can I create this type of report? Is it better using Fund Management?
My client is asking on cash flow report in which the report should show all fund (cash at bank) movement. Basically, the report should have 2 main category, which are Cash Inflow / Cash Outflow,for example:
Cash Inflow
- Payment received from customer
- Interest received from FD at Bank
- Other receipts
- Government Subsidy Received
- Government Grant
Cash Outflow
- Payment to vendor
- Finance charge paid to bank (overdraft/loan, etc)
- Operating Expenses
- CAPEX
- Other Payments
For cash inflow, double entries involve to bank GL is as follows:
DR Bank
CR Item listed in cash inflow section, for example: payment received from customer (or CR csutomer), FD interest received (Revenue item of P/L), etc
For cash outflow, double entries involve to bank GL is as follows:
DR Item listed in cash outflow section, for example: payment to vendor (or DR vendor), Payment to non-trade vendor (for asset purchase, etc), Interest paid (expense item of P/L), etc
Questions:
Since my debit or credit leg of my bank account, currently does not have any indicator that can explicitly indicator the nature of my inflow and outflow, how can I produce my report of cash flow show above?
Note: It is extremely heavy for customized ABAP program to extract my bank entry and point back to the opposite leg to find the nature of my inflow/outflow as well.
Kindly advise.
Thanks in advance,
sbmel

Hi
In ECC 6.0 EhP4 - A new feature has been added inorder to provide such a kind of cash flow report... You need to activate Business Function PSM_FA_CASH..
Refer this link http://help.sap.com/erp2005_ehp_04/helpdata/EN/42/e34f2c31023ee1e10000000a1553f6/frameset.htm...
... Under Business Functions in SAP ERP > Enterprise Busn Func > Accounting > Public Sector management > PSM, Cash basis accounting & Cash flow reporting
Once you activate it, you will find additional nodes of IMG under SPRO > Public Sector management.....
This works the same way as Doc Splitting... technically speaking, this new feature is extended arm of Doc Spliting... In Doc Splitting, you assign item Categories to each GL Account.... Similarly, you will assign a "Revenue / Expense Account" to each GL Account.... This R/E Account can be any alpha numeric text.... This R/E account then gets added as a Doc Splittin Char and is populated in every FI Doc that you post
I have tried this in a test client a year ago and was more or less satisified with it barring some exceptions....
br, Ajay M

V IMP : Report for Cash Customer Bill wise details

Hi ABAP Gurus,
Any body is having the report on Cash Customer Bill wise Details (with invoice details) ? Input criteria - Company Code, Plant, Cash Customer Name(customer Name given while creating cash customer) & Date Range(Document date). I am using the tables BSEC,BKPF,VBRP,BSAD,BSID. Out put i have to get Date, Doc No, Particulars QTY UOM Material Rate and Gross amount(Opening & Pending Amount) as line items.
Please send me code on this. It's very urgent. Tomorrow is it's delivery date.
I will reward points.
My mail ID is [email protected]
Thanks and Regards,
Sundeep.

Hi,
Check the following links:
http://www.sap-img.com/sap-fi.htm
http://www.sapbrainsonline.com/TUTORIALS/FUNCTIONAL/FI_tutorial.html
Regards,
Bhaskar

Purchase Order Print Report Compilation Error

Hi,
While compiling the report in Reports Builder Purchase Order Print Report , we get the following error:
identifier GET_PRECISION must be declared.
Where as this is a seeded function inbuild in the Program Units.
Also while compiling on server we get the error.
Cannot convert rdf to rep.
Thanks,
Angelica.

Couldn't find how to copy the PO layout over using copy express.
I did compare the RDOC fields for POR20002 in both databases and they are Identical.
In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing. Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places. When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
Again, SBODemoUS works correctly and AAA_TEST give the error.

Printing report to direct print 9i

Hi,
I am able to direct print the reports on web using normal parameters...i.e. desname, destype and desformat.
When it prints successfully, it gives us a message in a separate browser window "The report has been successfully printed out"
And we don't want this message. Can anybody tell me to suppress this window and message ?
Command:
WEB.SHOW_DOCUMENT('/reports/rwservlet?
report=REPORT.rdf&userid=scott/tiger@ora&
P_DEPTNO='||:EMP.DEPTNO||'&
desformat=htmlcss&destype=printer', '_blank');
Thanks,
Martonio.

Martonio,
if you use RUN_REPORT_OBJECT() built-in in Forms to print Reports then you don't have this problem.
If you request the Report directly from a Web browser, not using Forms at all, please ask the same question on teh reports forum here on OTN.
Frank

Print report on network/local printer(plz help)

Plz Forms gurus, help me to solve this problem it's very very importante for me
We have at a lot application witch work in client/server mode using forms/Reports 6i.With these applications we haven't problem to print report on printer using RUN_PRODUCT.Now we want to migrate on Forms/Reports 9i.When we use Run_Report_Object to print report on network print, we are encountring problems, the following errors occurs:
REP-713: Printer name '\DT_C2_0_8102\LaserJet1100' is wrong in the parameter DESNAME.
LaserJet1100 is a network printer install on the machine witch have DT_C2_0_8102 in the network.
I would like to know, if there an other way for naming printer? Secondly, i would like to if i add a network printer on my machin and define it as my default printer. Am i obliged to define the parameter DESNAME in the call off RUN_REPORT_OBJECT. If someone have a sample code about how to print on printer, it'll be helpfull.
Plz forms gurus help me to solve my problem.
Thanks in advance.
TYAG

Duplicate?
Print report on network/local printer

Print report on network/local printer

Hi forms gurus,
I repost this topic because it's very important to me.We have at a lot application witch work in client/server mode using forms/Reports 6i.With these applications we haven't problem to print report on printer using RUN_PRODUCT.Now we want to migrate on Forms/Reports 9i.When we use Run_Report_Object to print report on network print, we are encountring problems, the following errors occurs:
REP-713: Printer name '\DT_C2_0_8102\LaserJet1100' is wrong in the parameter DESNAME.
LaserJet1100 is a network printer install on the machine witch have DT_C2_0_8102 in the network.
I would like to know, if there an other way for naming printer? Secondly, i would like to if i add a network printer on my machin and define it as my default printer. Am i obliged to define the parameter DESNAME in the call off RUN_REPORT_OBJECT. If someone have a sample code about how to print on printer, it'll be helpfull.
Plz forms gurus help me to solve my problem.
Thanks in advance.
TYAG

Hi Franck,
Excuse me to repost the same topic.I did it because it's very important to me to solve this problem.
I do what u said by change the value of DESNAME parameter in '\\DT_C2_0_8102\LaserJet1100' but the same error happen.
Here is the code the function i use to print report:
FUNCTION     Run_Synchrone (P_robject VARCHAR2,P_rserver VARCHAR2,P_rformat VARCHAR2,P_rdestype NUMBER,P_rdesname VARCHAR2,P_rfilename VARCHAR2,P_rother BOOLEAN,P_rother_params VARCHAR2,P_rservlet VARCHAR2,P_message_out OUT VARCHAR2) RETURN BOOLEAN IS
          V_rid REPORT_OBJECT;--Id du report object
          --V_rmessage                  VARCHAR2(100)     :='';
          V_rmessage                VARCHAR2(100)     :=NULL;--valeur de retour run_report_object
          --V_rstatus                      VARCHAR2(100)     :='';
          V_rstatus                VARCHAR2(100)     :=NULL;--Statuts de l'execution
          --V_Jobid                     VARCHAR2(4000)     :='';
          V_Jobid                     VARCHAR2(4000)     :=NULL;--id du job d'Ã©dition
          --hidden_action                       VARCHAR2(2000)     :='';
          --V_other_Param                    VARCHAR2(4000)      :='';
          V_other_Param                    VARCHAR2(4000)      :=NULL;--Autre parametre utililasteur
          V_user_connect VARCHAR2(255):=GET_APPLICATION_PROPERTY(username)||'/'||GET_APPLICATION_PROPERTY(password)||'@'||GET_APPLICATION_PROPERTY(connect_string);--utilisateur connectÃ©
          v_report_url VARCHAR2(100);
          V_Ret_Val BOOLEAN;--Valeur de retour de la fonctio,
     BEGIN
          V_rid:=FIND_REPORT_OBJECT(P_robject);
          -- setting Reports runtime parameters
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_FILENAME,P_rfilename);
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_SERVER,P_rserver);
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_DESTYPE,P_rdestype);
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_DESNAME,P_rdesname);
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_DESFORMAT,P_rformat);
          --Autre parametre par defaut= userid
          V_Other_Param:='userid='||V_user_connect;
          --Test si autre paramÃ¨tre applicatif
          IF P_rOther THEN
               V_Other_Param:=V_Other_Param||P_rother_params;
          END IF;
          SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_OTHER,V_Other_Param);
          V_rmessage     := RUN_REPORT_OBJECT(V_rid);
          V_rstatus      := REPORT_OBJECT_STATUS(V_rmessage);
          --Test d'Ã©xÃ©cution de l'Ã©tat
          IF V_rstatus='FINISHED' THEN--Aucune erreur
               P_message_out:=P_rfilename||' Ã©dition terminÃ©e avec succÃ¨s';
          V_Ret_Val:=TRUE;
          ELSE--Erreur quelconque.
               --handle errors
               P_message_out:=V_rstatus||': '||P_rfilename||' Ã©dition annulÃ©e...';
               V_Ret_Val:=FALSE;
          END IF;
          RETURN(V_Ret_Val);
     END;
And is how i call it:
V_Edition:=Web_Edition.Run_Synchrone ('RO_FM_DMP6',:GLOBAL.rserver,'PDF',PRINTER,'\\DT_C2_0_8102\LaserJet1100',P_File,TRUE,V_user_params,:GLOBAL.rservlet,V_Mess_Out);
What's the problem.Perhaps the problem reside in how i install the printer on the machin where i try to print.What steps must i follow to install it.
PLZ HELP!

Print Report of cash Memo

Similar Messages

Maybe you are looking for