Print request

hi all,
can you tell me which transaction code/ table is for finding print request no corresponding to spool request no.
thanks

SP02
Pls reward if helpful.

Similar Messages

EH&S WWI for GLM print request processing

Hi all,
we installed EH&S WWI for GLM print request processing scenario, following the note:"1394553", but when we try to print we receive this error from WWI:
Start Function 'WWI_PRINTREQUEST_CREATE'
Initializing parameters
Receiving data from client
   calling RfcGetData returned 0
    receiving data lasted: 0.0 sec.
    Retrieving print request data from RFC interface
    Using Temp Directory E:\WWI\TEMP\BSV100000000000062
   Delete files in E:\WWI\TEMP\BSV100000000000062
    Creating text file E:\WWI\TEMP\BSV100000000000062\r000000000062.val
    Writing data to text file 39 lines, 1009 characters
    Updating print request status from 0 to 1
    [DB time] Writing print request lasted 9 ms
Start processing command 'Create print request' in synchronous mode
Creating print request 000000000062
WwiSapDms::retrieveDocument: RFC error when calling ABAP function moduleRFC connection is not Unicode
WwiSapDms::retrieveDocument: RFC error when calling ABAP function module
key     : RFC_ERROR_SYSTEM_FAILURE
message : See RFC trace file or SAP system log for more details
Reading SBV document IB0120510 from Cache failed
    WwiCacheRead resulted with -1
    Updating print request status from 1 to 5
    [DB time] Writing print request lasted 4 ms
##### Command 'Create print request' finished with status E #####
    Storing ERR file E:\WWI\TEMP\BSV100000000000062\l000000000062.err into DMS succeeded
    22 lines
Sending data to client
   calling RfcSendData returned 0
    sending data lasted: 0.0 sec.
Elapsed time : 0.1 sec.
We don't understand what kind of RFC or what part of customizing we have to check, could you please help us?
Thanks,
Christian

Dear Pugal
we are not using GLM + and I am not sure about the technqiue used there to handle load balancing. Regarding general WWI setup I assume you know this Note: EH&amp;S: Availability and performance of WWI and Expert servers
On the top there is a further SAP Note abvailable which might be of interest. This is referenced here:
http://de.scribd.com/doc/191576739/011000358700000861002013-e
May be check OSS note: 1958655; OSS Note 1155294 is more related to normal WWI stuff; but may be check it as well. May be 1934253 might help better
May be this might help.
C.B.
PS: may be check as well: consolut - EHS_MD_140_01 - EH&amp;S-Management-Server einrichten
The load balancing of synchron WWi servers is donein the "RFC" layer, therefore you have no inffluence here, for asynchron WWI servers you can do a lot to manage the WWI load balancing by using "exits" etc.

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

SAP GLM Print Request - Load Balancing of WWI server

Hi GLM Experts,
I am using new GLM + module that generates labels based on Print Requests. I am unable to understand how I can load balance the WWI services when there are multiple label printing requests.
In GLM + we associate a WWI to a Print Station and which can then be associated with a printer. So in the configuration we are tying up a printer a WWI.
Also during label printing, if the scenario uses print request module, then the use need to select a print station and printer. What happens if the WWI related to the print station is down?
For example I have two services in WWI server GENPC1 and GENPC2. I created WWII and WWI2 as two print stations. I will associate my printer PRNWWI to both the print stations WWI1 and WWI2.
During label printing if the user picks and WWI1 and Printer PDNWWI and if the GENPC1 WWI server assocaited with print status WWI1 is busy and down I want WWI GENPC2 to generate the label?
How to setup the above load balancing or fall back? Please let me know.
Thanks
Pugal

Dear Pugal
we are not using GLM + and I am not sure about the technqiue used there to handle load balancing. Regarding general WWI setup I assume you know this Note: EH&amp;S: Availability and performance of WWI and Expert servers
On the top there is a further SAP Note abvailable which might be of interest. This is referenced here:
http://de.scribd.com/doc/191576739/011000358700000861002013-e
May be check OSS note: 1958655; OSS Note 1155294 is more related to normal WWI stuff; but may be check it as well. May be 1934253 might help better
May be this might help.
C.B.
PS: may be check as well: consolut - EHS_MD_140_01 - EH&amp;S-Management-Server einrichten
The load balancing of synchron WWi servers is donein the "RFC" layer, therefore you have no inffluence here, for asynchron WWI servers you can do a lot to manage the WWI load balancing by using "exits" etc.

Spool Error - Errors occurred processing this print request

Hi,
      I have a problem printing documents through spool.
1. I run a form from Form Builder, execute and select to print from spool
2. In SP02, I select the spool request created and Select Direct Printing.
Spool request Status is changed to error and following is the error log.
I get this for all print requests from spool. When I print these documents directly, I have no problem. I understand there is some problem with the spool server but do not know what it is.
I also observed that when the spool access method is G - I have no problems in printing.
Printer: HP HP laserJet PS (2430)
Host Spool Access Method: L: Print Locally Using LP/LPR.
Device Class: Standard Printer.
SAP NW 2004s SP14
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9 is currently being printed
End of message
Command used: print /d:
bs107.platinumdb.com\HP01 D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 16151
Request name PBFORM HP01 SMULLAPUDI
Client 800
Owner SMULLAPUDI
Request attributes
Time created   2008050118454600
Remaining life +00007235918
Dispo 1 (Go/Hold) H
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device HP01
Default no. copies 1
Format G_RAW
Main print request characteristics
Spool request number 16151
Print request number 1
Print request attributes
Time created   2008050118471500
Output device HP01
Format G_RAW
Character converter active when first problem occurred
No information available
I am working on this since 4 days with no solution. Kindly help.
Thank you,
Vasu
Edited by: subbu M on May 2, 2008 11:37 PM

Hi Sri,
Try to setup the printer at OS LEVEL.
then,
If on Windows---use method C.
if not,
use method U and map to your printer queue at OS level.
Hope this resloves this issue.
Reward Pts if useful
Regards,
Malti

HP Photosmart 5514 e-All-in-One Printer - B111h not responding to print requests on Windows 8

Hello there,
Recently, I've been having these problems where the Printer is not responding for my requests to print on my HP Windows 8 Laptop for a PDF File. I had a message where it said that "Printer is in error state" but didn't get that message after I tried printing again. Now my printer is not responding to any print requests though the touch screen still works and is saying that the wireless is still working. If anyone could help me that would be great!
Thank you for your time.

I see that you are having a problem printing from Windows 8.
See if you can print a self-test page or Printer status report from the printer itself. This will test the hardware functionality for the printer. If it does print, then it's a connection issue. If it does not print out, then we will need to try to deal with the hardware problems of the printer.
Run the print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03275041
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

'Send Print Request' button can send paystub output to R/3 print spool:

Hi
Portal Experts
Current state of the SAP environment on ECC 5.0 and EP 6 SP17
'Send Print Request' button can send paystub output to R/3 print spool:
When I clicked on send print request, I expected a printout to my default printer but didnt get one. If the dialog user has the 'print immediate' option turned off, their paystub will spool up in R/3. When a user clicks on the printer ICON within Adobe, they get to choose their printer and know that it will go straight to the printer. This could be confusing to R/3 dialog users.
Any solution,How to change the option from spool to print immediate.
Thanks
Vanteru

Facing the same problem.
Please let me know if you have found a solution.

Send print Request - Salary Statement

Hi,
Does anyone have any information on this button. Where is it configured, how does it send print requests, can it be changes(send to different location) and what roles does the user require.
Thanks
Points to helpers

Yep, definitely possible with EP7 and ECC6.
You need a portal role that gives you access to the Content Administration menu.
Easiest if your portal user ID is linked to an employee with payroll results in ECC (via Infotype 0105).
Open the payslip iView in the Portal Content Studio and click the preview button.
Ctrl + right click on the print button, set the Invisible flag to Yes.
Apply the change, close the personalisation dialogue, save the iView and you're done.
You'll notice after making any personalisation changes that some new entries appear in the iView properties, this is how global personalisation changes are stored. The changes then get exported with the object to your other portal systems
Cheers,
John

New laserjet pro cp1525 ejecting extra, blank, page at end of print request. how do you stop?

Just installed a new Laserjet Pro CP 1525nw. It wants to expel a blank sheet after every print request. How do I stop it from ejecting the blank sheety at the end of the print request.

Is this only on a certain app? What about printing a windows test page or even from notepad? If these are ok then this would suggest its the page setups in the program you ate using rather than driver / printer.
If its all apps try the reports from the printer direct, if this is ok then it's probably drivers. Remove from safe mode and download updated.

FBU Internal Job Queue Full for Synchronous Processing of Print Requests

Hello All,
We are getting a lot of errors in system log (SM21) with the
Error : FBU Internal Job Queue Full for Synchronous Processing of Print Requests
User :SAPSYS
MNO:FBU
=============================================================
Documentation for system log message FB U :
If a spool server is to process output requests in the order they were
created using multiple work processes, the processing of requests for a
particular device can only run on one work process. To do this an
internal queue (limited size) is used.
If too many requests are created for this device too quickly, the work
process may get overloaded. This is recognized when, as in this case,
the internal queue is exhausted.
This can only be solved by reducing the print load or increasing
processor performance or, if there is a connection problem to the host
spooler, by improving the transfer of data to the host spooler.
Increasing the number of spool work processes will not help, as
requests for one device can only be processed by one work process. If
processing in order of creation is not required, sequential request
processing can be deactivated (second page of device configuration in
Transaction SPAD). This allows several work processes to process
requests from the same device thus alleviating the bottleneck.
Enlarging the internal queue will only help if the overload is
temporary. If the overload is constant, a larger queue will eventually
also be overloaded.
===========================================================
Can you please tell me how to proceed.
Best Regards,
Pratyusha

Solution is here:
412065 - Incorrect output sequence of output requests
Reason and Prerequisites
The following messages appear in the developer trace (dev_trc) of the SPO processes or in the syslog:
S *** ERROR => overflow of internal job queue [rspowunx.c 788]
Syslog Message FBU:
Internal job queue for synchronous request processing of output requests full
The "request processing sequence compliance" on a spool server with several SPO processes only works provided the server-internal job queue (see Note 118057) does not overflow. The size of this request queue is prepared using the rspo/global_shm/job_list profile parameter. The default value is 50 requests. However, if more output requests arrive for the spool server than can be processed (and the internal request queue is full as a result), more SPO processes are used to process the requests (in parallel), and the output sequence of the requests is no longer guaranteed.
Solution
Increase the rspo/global_shm/job_list profile parameter to a much larger value. Unfortunately, the value actually required cannot be found by "trial and error" because this queue contains all the incoming output requests on a spool server, not just the "sequence compliant" requests. A practical lower limit for this value represents the maximum sequence-compliant output requests for the above generated output device. If, for example, 1000 documents that should be output in sequence are issued from an application program to an output device, the queue must be able to hold 1000 entries so that it does not overflow if the SPO process processes the requests at a maximum low-speed.

Can't cancel a print request?

Set up a remote printer with the netstandard.
lpadmin �p p5net �v /dev/null
lpadmin �p p5net �i /usr/lib/lp/model/netstandard
lpadmin �p p5net �o dest=p5 :9100 �o protocol=tcp
enable p5net
accept p5net
Everything works fine, but when I disabled the printer queue with "disable p5net" and then sent a few print requests it is not possible to cancel the print request.
Has anyone a idea on how to fix this.
Thanks
Iwan Celissen

Delete the printer from System Preferences (under the Apple menu) > Print & Fax. Then add it back again.
Best of luck.

Err:Internal Job Queue full for synchronous processing of print requests

Hi,
We are getting a lot of errors in system log with the
error :
Internal Job Queue full for synchronous processing of print requests.
User :SAPSYS
MNO:FBU.
When we check the document in syslog it states it can be solved by reducing the print load or increasing performance or if there is a connection problem to host spooler , by improving the transfer of data to host spooler..
But not by increasing the no of spool workprocess..
I think any of the one stated cannot be implemented ..
Pls provide your valuable answers and if any of the above can be implemented from your end..
Regds,
Satyanarayana N

Hi Vamshi,
Thanks for your response but would also like to confirm how we can say that spool queue is full and what may be the Max size of spool queue..
When we say Internal queue is full does it mean spool queue...
And also when I run the TEmse consistency check it is giving some errors..
When I check Spool requests there are some waiting process,but when I check Output requests there are only 1 or 2..
Please provide me your valuable solution regd this..
Regds,
Satyanarayana N.
Regds,
Satyanarayana N.

Firefox 4. crashes on Print request - "prop res DLL not loaded" - Why?

Happens with every Print request to Lexmark 5100. Brother printer works OK.
It doesn't matter which web site. It will always crash as above. If I request the property sheet for the printer, that is when the DLL not loaded box comes up.
With prior 3. versions the printer works, and will work if I restart Ver 3. and then print (without re-booting the machine)

See this support thread: <br />
https://support.mozilla.com/en-US/questions/824219

8600plus (OS X) will not accept print request from the registered add at hpconnect

HP 8600 plus OS X, will not accept a print request from the registered address at hpconnect but will print a request from the address that comes on the printer. I have tried to change the factory settings and i get a message from Hp connect that there is a printer error.

Hi Bill,
Bit of a strange error, I would recommend calling HP's team - they helped me out with my printer, and were very good:
HP Connected
ePrint
Instant Ink
Scheduled Delivery / Printable with automatic printing 855-785-2777 8am - 11pm EST Mon. - Fri.
10am - 6:30pm EST Sat.
U.S.: English (from link http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1)
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal menu?

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal print menu?

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Print request

Similar Messages

Maybe you are looking for