Print resolution problem - grainy

I can't get my photos to print sharply on my printer. I have a HP Photosmart P1100 hooked up to my imac. Things print out put the photos look grainy like they are printing on a low resolution/quality setting. I tried looking through the print settings to see if I could adjust the quality (like on a PC) but can't find that option. If I transfer the same file to my PC I can print it out and it looks fine (photo print is sharp/clear/etc).

What are the pixel dimension of the images you're trying to print? Are you cropping the images to any degree?
OT

Similar Messages

Resolution problem when printing JPanel with picture on bg

Hellow!
I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

No Printer Resolution Options for hp LaserJet Enterprise 600 M601

Running under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
Any thoughts?

Re instakll the printers driver first remove the printer from the printer list.
My only thought!

Resolution problem

How can I improve the resolution of files? When clients upload files, they get a resolution warning for prints larger than 5x7. Never had this problem with Photoshop Elements. I have increased the file size to largest/100 on export.

You cannot improve the resolution but you can increase the pixel dimension.
Resolution comes into play when we print an image to a certain size. Since we need at least 240 ppi (and better 300 pi) for a quality print, you can calculate the needed pixel dimension by multiplying print size in inches (long side or short side - but only one of them) with the necessary print resolution (300).
For example: For a print of 15" x 10" you would need a pixel dimension of 4500 x 3000 pixels (Print resolution 300);
At 240 ppi print resolution the same print size would result in a pixel dimension of 3600 x 2400 pixels.
You can set the pixel dimension in the Export Dialog / Image Sizing. Select one of the edges (Short Edge or Long Edge) and specify the size in inches and the resolution (best 300 ppi). You need to specify only one side; the other side will automatically fall according to the side ratio. So if - in the above example - you specify 15" and a resolution of 300 ppi for the the Long Edge, the Short Edge will automatically be 2400 pixels if the ratio of the sides is 1.5 : 1.
I said initially that you cannot improve / increase the resolution. This is so because as long as an image is a digital image only, i.e. on the computer, or on the web, etc. it has only pixel dimension. Resolution comes into play only when we have also a size in inches (or cm), i.e. a physical dimension. Digital images don't have a physical dimension, only printed images have one.
Thus you need to increase the pixel dimension of your images so much that your clients can print it with the required resolution for a specific print size.
The question you have to ask yourself (and maybe your clients) is: What is the maximal print size that my clients should be able to make. This maximal print size (multiplied by the print resolution) will determine the pixel dimension you need to choose when exporting the image.

EPSON LQ - 2180 ESC/P2 : print setting problem from SAP b1 8.8 PL 19

Hi All,
we are SAP Business One Customer, I have created Crystal Report and using Printer : 'EPSON LQ - 2180 ESC/P2',
I have selected Same Printer in Printer Option
Orientation is 'Portrait'
Paper Size 'US Std Fanfold'
but print out comes in Vertical Format, we want to print it in Horizontal format
I Tried many times in Landscape and Portrait format but print comes in Vertical format.
I have checked some following conditions:
1. If printer is in 'Portrait' format then test print is OK..
2. If Crystal Report is in 'Portrait' format then test print is OK..... directly print from Crystal Report
3. whenever I take print out from SAP B1 for same Crystal Report with same setting but print comes in vertical format.
I am attaching Print Setup screen print with this mail, pls kindly find the attachment.
Pls give me feasible Solution as soon as possible.
Thanking you in an obligation.
Regards,
Babu Terve

hi Datta,
when you say S-Account, this account is needed when we use the SAP Portal. Contact your SAP Partner to get your S-Account. regarding the note i will quote it here
1535606 - Printer preference setting for the Crystal Layouts
Symptom
Print Crystal Report layout does not consider Business One (B1) printer preferences changed by user before printing.
In order to enable B1 to make print preferences changes in application the Crystal Report Layout must have ticked off the "Dissociate Formatting page Size and Printer Paper Size" option in page setup.
The following preferences are enabled for the Crystal Reports Layouts:
1. Orientation: "Portrait" or "Landscape".
Note! In case the report is too wide to fit on rotated page, error message is returned.
2. Document Options: Duplex printing (Print on both sides).
3. Paper Options: Paper size.
Note! The options Custom Size will not be considered by B1.
Note! In case it is not possible to print on some paper size error message is returned.
4. Paper/Quality: Print Quality/Printer Resolution, Paper Source.
5. Color Options.
Note! Crystal does not resize the report to fit the selected paper or format.
Cause
Application error
Solution
As a workaround, please change the Page Setup to Landscape in Crystal
Report designer itself.
SAP intends to provide a patch or patches in order to solve the problem
described. The section Reference to Related Notes below will list the
specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number. Please note that these references can only be set at patch
release date. SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
Other terms
Print Setup, print preference
Header Data
Released on     06.12.2010 15:05:56
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with medium priority
Category     Program error
References
This document refers to:
SAP Business One Notes
1540128           Overview Note for SAP Business One 8.8 Patch 18
This document is referenced by:
SAP Business One Notes
1540128           Overview Note for SAP Business One 8.8 Patch 18
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
regards,
Fidel

Printing resolution bugs

I am very happy to report that the big printing bug in 2.0 has been fixed (the release note talks about panoramic images which is silly - this bug pertained to all images, even vertically oriented ones). You no longer get a major reduction in resolution when the file gets rotated from its native orientation, which meant you had to print portrait oriented raw on a landscape paper and use rotation as RAW is natively always landscape to avoid a major loss of sharpness. This is no longer an issue and Lightroom always sends the resolution you ask it to.
There is however, a small bug left. When you uncheck "print resolution", Lightroom does not stop scaling the image and you will still get the resolution that is now shown in grey. For example an image that is 400 ppi natively at the printed size WILL get downscaled to 300 ppi (if that was your last setting) even if you uncheck the scaling option. This is just a minor annoyance as in most images, you will not see the difference, but still should be fixed I guess.

The books are printed at 300 dpi as that's the resolution of the pdf file that's created by iPhoto for uploading and printing. \
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Excel chart into InDesign - resolution problem

Hello, I am working on a Mac OS 10.8.3 and using InDesign CS6
I have to place a chart that was created in Excel into InDesign and I realize there is a resolution problem if we start to print.
Would you suggest I create the chart using an Adobe product? I am just trying to save time, but I'm afraid that may be the only answer.
I have a screen shot below of kind of what it looks like. I have about 25 of these.
Thank you.

I tried pasting the chart from Word into Excel and then I dragged that chart into Illustrator and then copied into InDesign. Probably used an extra step there, but..
I went to this site for help too; http://helpx.adobe.com/indesign/kb/import-excel-data-charts-graphs.html
The text comes in a little funny, but I redid the text boxes and I was able to get in and edit some of the elements.
Thank you!

3D Print Resolution on MakerBot Replicator 2

HI All,
Is a week that i'm printing with Photoshop on my Replicator 2... but i found some resolution problems.
as you can see in this detail the model printed at 0.07 mm resolution is almost alf respect the same model printed on makerware at 0.1mm.
Do someone have the same problem? Maybe a setting wrong in the pref file?
thanks in advance
Renato T.

Hi Anit,
can i have the link where is moved this new thread?
I don't find the Photoshop Forum.
thanks
Renato T.

Printing resolutions, trees, resizing components & co

Hi.
I've a little problem which grows bigger and bigger every day: I've to print a tree. Sound's easy, hm? That's not all, I have to use a template and there's a place marked where I've to put that tree (can be a component) but I'm not allowed to change template and I'm not the one adding the other components, just reponsible for trees.
Ok, now I managed that tree is displayed over more pages without cutting any objects at end of page but now I face other troubles: The tree is too big at all. So I've to resize this.
I was first wandering, why tree was that big and it is because a page is always rendered with 72dpi by default. First think I thought was to change printing resolution by setting page attributes:
    PageAttributes pageAttributes = new PageAttributes();
    int[] attributes = pageAttributes.getPrinterResolution();
    // using 150 dpi instead of 72 to make tree half sized
    attributes[0] = 150;
    attributes[1] = 150;
    pageAttributes.setPrinterResolution(attributes);
    PrintJob theJob = getToolkit().getPrintJob(this, Catalog.getString("Previewer"), null, pageAttributes);Works fine, but resizes everything, also header and footer and all other components which are already displayed in current size.
So I need something else.
I think the real resize happens in the WPrintGraphicsWrapper (yes, I'm using windows) where the AffineTransform for the WPrintGraphics is calculated and set.
I can't avoid this but I tried to set another scale for the graphics during painting by calling following method in the paint-method of the base components I want to resize:
protected Graphics checkScaleGraphics(Graphics g, boolean rescale) {
    if (g instanceof Graphics2D) {
      // at preview g2d is received
      if (rescale) {
        ((Graphics2D)g).scale(((double)1/scaleFactor), ((double)1/scaleFactor));
      } else {
        ((Graphics2D)g).scale(scaleFactor, scaleFactor);
    } else {
      // trying to get 2D graphics object for scaling using reflect
      try {
        // get real graphics from wrapper
        Graphics2D d2Graphics = (Graphics2D)g.getClass().getMethod("getTarget", null).invoke(g, null);
        if (rescale) {
          d2Graphics.scale(((double)1/scaleFactor), ((double)1/scaleFactor));
        } else {
          d2Graphics.scale(scaleFactor, scaleFactor);
      } catch(Exception e) {
        System.out.println("Exception: "+e); // for testing, no exception handling
    return g;
}Using reflect is rather slow but code must be compileable on sun too.
However it doesn't work at all. The components get resized but the nodes where irrecognizable, especially text looks cruel.
Also using reflect is very slow and code must be compileable on sun also.
Has anybody experience with this or knows a good way how to print a tree at all?
Thanks in advance
Karl

EPRON SP R 2880 - printing resolution

Since the last upgrade of OS X10.5.8 I'm anable to set the printer resolution higher than 720x720 DPI. The SP R2880 is capable to print up to 5760 DPI.
Someone has the same problem? Do you know how to solve it?
Thanks
Stancic

Stancic,
Standard OS 10.6 doesn't support our R2800's and when you visit the local Epson site (in my case the Netherlands) you get a message that our printers are currently not supported... However when you visit the dot com site there you'll be able to find the 6.57 version of their software which does run under 10.6, provided you have Rosetta installed. Using that setup allows me to choose multiple resolutions for printing my photos!
Hope this helps!
Anton

Image looks great in PS- when I go to print it looks grainy in printer preview dialog box and prints blurry. Why?

Image looks great in PS- when I go to print, it looks grainy in printer preview dialog box and prints blurry. Why is this happening?

PS CC, Yosemite, Epson 3880 (called espson to make sure it wasn't something with that), saved as a tiff/psdjpg- all files behave the same way. When I open the raw file- and only crop the image- it behaves this way now- with grain and blur when printing. No other files do this in the same shoot. I worked on this image- could something have gotten corrupted along the way such that now even opening the raw file creates this problem. SInce upgrading my computer - a window pops up when I open PS that says I need to update my graphics card?? for 3D- I'm not using 3D- so I don't know if that means anything. I have to leave for about an hour- but greatly appreciate any feedback. I will be in touch. Thank you.

Appleworks 6.2.4 Printing Resolution & Colors

The Appleworks 6.2.4 program that I installed on my MacBook from an old eMac apps disk no longer allows me to choose the printing resolution or color vs. B&W as it for the first few months of use on the MacBook. It has never allowed me to choose color intensity and related functions as it did on the eMac. The menu from which I could once choose the printing resolution has changed to read: Layout, Paper Handling, Cover Page, Scheduler, Supply Levels, and Summary. None of those allows a resolution change option. I tried uninstalling and reinstalling the program, but even that did not refresh those functions. How can I restore them for use with my MacBook? Also, should I upgrade to version 6.2.9, and if so, how do I do it?

Have you changed printers recently, or installed/updated your printer drivers?
These menu items are in the menu in the Print Dialogue, and depend on the options offered by the printer and its driver, not on AppleWorks.
Mine, when printing from AppleWorks 6.2.9 to a Canon Pixma series ink jet under OS X v10.4.9, shows:
Copies & Pages
Layout
Scheduler
Paper Handling
ColorSync
Cover Page
Quality & Media
Color Options
Special Effects
Borderless Printing
Margin
AppleWorks
Summary
For a Paint or Drawing document, the AppleWorks item (which shows printing options specific to the application) offers All/Left/Right pages as its only option.
The only resolution change option available within AppleWorks, to my knowledge is Resolution & Depth... in the Format menu. That menu item is available only in a Paint docment or in a Paint frame within other types of document.
Reinstalling your printer drivers may help.
Regarding updating to AW 6.2.9: The update adds scroll wheel compatibility and fixes some bugs. The only downside I'm aware of is the loss of ability to open some AppleWorks/ClarisWorks files created using earlier versions of the application (eg. ClarisWorks 4). Before updating, you might want to save a copy of your current AppleWorks 6 folder to an external drive to keep for opening those earlier files affected by this problem.
You'll find the AppleWorks 6.2.9 updates on this page. Note that there are two English Language versions. The US/North American English updater is the one in the box at the top right, identified only by its file size (15.8 MB). The International English version is at the top of the main list on the left.
Regards,
Barry

XSD Resolution problem - Unable to load Translation schemas

Hi,
I've run into a very strange kind of problem (not to say some are less strange then others). Let me explain the context of the situation.
I've got a BPEL process calling two plsql packages on ORA database, one Java web service running on the same weblogic server and couple of other services (eg. notification services, jdbc select/insert, etc.). There is no problem with the last listed, but definitely something wrong with the web service and the plsql callouts.
When I deploy the BPEL process and execute it, the first two instances always fail. The same happens when I restart the server, the errors are repeated after a certain period as well (for example over night). The process always fails EXACTLY TWICE, before running normally. Every other instance executed after the two initial failures runs WITHOUT the following error.
I mentioned there are two plsql callouts in the process, earlier the first instance failed on the second one and the second instance failed on the first. Now, it mostly fails on the second callout. I've made no significant changes in the code. Perhaps the strangest thing about this is that it fails when invoking the plsql package but the error concerns xsd definitions of the web service that plays no role at this stage.
All my services are correctly deployed, I deleted all interface definitions from MDS repository and redeployed SOA bundle again before installing each service.
I think it has something to do with generated xsd definitions by the java web service (it's the http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 and http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 from following stack trace), but I can't figure out what exactly is wrong with them.
Anybody come accross a similar error? Thanks for tips, I've run out of ideas.
Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID     default/S50001KontrolaSouboruBS!1.0*soa_be986963-f9d9-412d-b692-43804a35b3ee/KontrolaSouboru/830023-BpInv18-BpSeq8.12-2
Fault Time     14-Feb-2012 11:11:16
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'LogFile' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBStoredProcedureInteractionSpec due to: XSD Resolution problem. XSD Resolution problem. Unable to load Translation schemas from for http://xmlns.oracle.com/pcbpel/adapter/db/TST_IP/LOG_FILE/LOG_FILE/ due to: Different schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentGlobal element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 82] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:82] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 36] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:36] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 21] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:21] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 51] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:51] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 66] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:66] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 112] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:112] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 127] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:127] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 97] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:97] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 115] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 52] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:117] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:54] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 175] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 98] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:177] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:100] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 153] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 128] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:155] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:130] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 64] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 83] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:66] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:85] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 93] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 22] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:95] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:24] Please make sure all used XML schemas are imported/included correctly. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Different schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentGlobal element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 82] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:82] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 36] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:36] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 21] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:21] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 51] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:51] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 66] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:66] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 112] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:112] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 127] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:127] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 97] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:97] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 115] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 52] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:117] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:54] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 175] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 98] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:177] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:100] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 153] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 128] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:155] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:130] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 64] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 83] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:66] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:85] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 93] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 22] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:95] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:24] </detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault>

I had similar issue, when i deployed composite using Jdeveloper. The problem was with my adf-config.xml pointing to dev server and all my references in my composite.xml referring to test server.
I changed property of 'oracle.mds.persistence.stores.db.DBMetadataStore' in adf-config.xml to test server. After adf-config.xml change in Jdev my compilation went smooth.
Note: If above changes doesn't work, try restarting JDeveloper, sometimes the changes in adf-config.xml is not getting effect immediately.
Regards,
Ziaur Rahuman S
Edited by: Ziaur Rahuman on Feb 13, 2013 10:58 PM

Print Quality problems

My print quality for Reds & Greens is coming out streaked. The blacks and blues are fine. I use HP ink cartridges anad keep them cleaned and aligned. But on the Alignment page the reds & greens are streaked and cannot be cognized. Could this be a print head problem ?

Hello novemberwolf,
Welcome to the HP Forums.
I see that you are having some printing issues when attempting to print in colour.
Please click on the following link on Fixing Print Quality Problems for the HP Officejet Pro 8600 e-All-in-One Printer Series.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

Hello,
We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
ApeosPort C5540I
Xerox LF6605 MF
The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

Print resolution problem - grainy

Similar Messages

Maybe you are looking for