Print same report with different watermark
i want to print the one report with different watermark
means suppose we generate the report and print the 10 copy of the same report but want 4 copy with one watermark and 6 with different watermark.
i have the number of watermark copy in the table .
pls give me the solution
regards
anurag
Thank you for your helpful response. What I am really asking is this -- when there is a CR2008 report based on db1, table1, and you want to use the SAME report with an identical table in a DIFFERENT database (db2, table1), can I easily use the same report? Or, do I have to generate another version of the report?
Thank you again.
David
Similar Messages
-
Use same report with different MySQL database
I am using CR2008 with MySQL 5.1.
I have a report that works with one of the tables (T1) in a MySQL database (DB1). I have another MySQL database (DB2) with the same table name and structure, except that the data has been updated.
I want to use the same report, but just ask CR2008 to now use DB2 and T1.
Try as I may (using Set Data Source Location...), but I'm not getting anything to work.
I looked for a previous thread on this, but was unsuccessful.
Thanks for any help.
DavidThank you for your helpful response. What I am really asking is this -- when there is a CR2008 report based on db1, table1, and you want to use the SAME report with an identical table in a DIFFERENT database (db2, table1), can I easily use the same report? Or, do I have to generate another version of the report?
Thank you again.
David -
WS-SDK Scheduling two instances of the same report with different params
I'm using the web services SDK for Business Objects XI 3.1 SP 2 to schedule reports. I've got it so that I can successful schedule a report with prompts, setting the value for the prompt and running the report.
However, I'm now trying to schedule two instances of the same report using a single call to BIPlatform.Schedule. It creates the correct number of new instances, the last of which is completely correct. The first one (and in fact if I do more than two all the rest except the last) lose the parameter value from the prompt and the schedule information and the type. So for example if I schedule two instances, both PDF, both for 8am tomorrow with parameters of 1 and 2, I get:
A Webi instance, scheduled to run immediately with no parameters specified and
A PDF instance, scheduled for 8am tomorrow with parameter 2
Any idea what I'm doing wrong?
Cheers,
Jack
Edited by: Jackson Pope on Feb 3, 2011 1:34 PMCan you possibly post your code here that sets params and schedules? Also as you schedule 2 instances on a single report in a sinlgle biplatform.schedule call(): as you query for InfoObject what you actually query for a single report isn't it, or do you schedule a report template and reschdule it previous instance?
-
Printing same smartform with different set of records continuously.
Hi SDNer,
Suppose a table contain Studet info like the following one:
ID Name Sub1 Sub2 Sub3
1 xxx sb11 sb12 sb13
2 yyy sb21 sb22 sb23
3 zzz sb31 sb32 sb33
Think that the smartform contain only a single page(Suppose smartform of student result).In the Selection screen User can put the range of ID.When User put 1-3 the smartform print 3 pages---1st for the student with id 1,2nd for student with id 2 and 3rd for student with id 3.when user put the input 1-2 the smartform print 2 pages.I need your help to accomplish such a scenario.
Thanks in advance.
Regards,
Sarbajit.Hi,
As per user's selection criteria you need fetch data in your driver program and need to store it in an internal table. The same internal table you need to pass to smartform. to handle your requirement of displaying one student record per page you need to use COMMAND node (with some condition). Using this you can force your smartform for page-break.
I hope this will help you to start and explore further.
Regards,
Sambaran Ray -
Multiple scheduling for same reports (with different prompt)
Hi,
I have to plan the scheduling of 10 reports (refresh and then .pdf generating). But i have to refresh these reports for 15 countries each time (prompt different between each instance).
So it will be 10*15=150 refresh done on the database !! Is it possible to make a 'massive' refresh (for all countries) and only filter by country when generated the input format (.pdf) ?
What is the best practice ?
RegardsHi
then you should definitely take a look at the publications.
[http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_bip_publishing_en.pdf]
Regards,
Stratos -
How to create a report with different page sizes
Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
MarcHi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Same sqlID with different execution plan and Elapsed Time (s), Executions time
Hello All,
The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
17th Oct 18th Oct
221,808,602
21
2tc2d3u52rppt
213,170,100
72,495,618
9c8wqzz7kyf37
209,239,059
71,477,888
9c8wqzz7kyf37
139,331,777
1
7b0kzmf0pfpzn
144,813,295
1
0cqc3bxxd1yqy
102,045,818
1
8vp1ap3af0ma5
128,892,787
16,673,829
84cqfur5na6fg
89,485,065
1
5kk8nd3uzkw13
127,467,250
16,642,939
1uz87xssm312g
67,520,695
8,058,820
a9n705a9gfb71
104,490,582
12,443,376
a9n705a9gfb71
62,627,205
1
ctwjy8cs6vng2
101,677,382
15,147,771
3p8q3q0scmr2k
57,965,892
268,353
akp7vwtyfmuas
98,000,414
1
0ybdwg85v9v6m
57,519,802
53
1kn9bv63xvjtc
87,293,909
1
5kk8nd3uzkw13
52,690,398
0
9btkg0axsk114
77,786,274
74
1kn9bv63xvjtc
34,767,882
1,003
bdgma0tn8ajz9
Not only queries are different but also the number of blocks read by top 10 queries are much higher on 17th than 18th.
The other big difference is the average read time on two days
Tablespace IO Stats
17th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
947,766
59
4.24
4.86
185,084
11
2,887
6.42
UNDOTBS2
517,609
32
4.27
1.00
112,070
7
108
11.85
INDUS_MST_DATA01
288,994
18
8.63
8.38
52,541
3
23,490
7.45
INDUS_TRN_INDX01
223,581
14
11.50
2.03
59,882
4
533
4.26
TEMP
198,936
12
2.77
17.88
11,179
1
732
2.13
INDUS_LOG_DATA01
45,838
3
4.81
14.36
348
0
1
0.00
INDUS_TMP_DATA01
44,020
3
4.41
16.55
244
0
1,587
4.79
SYSAUX
19,373
1
19.81
1.05
14,489
1
0
0.00
INDUS_LOG_INDX01
17,559
1
4.75
1.96
2,837
0
2
0.00
SYSTEM
7,881
0
12.15
1.04
1,361
0
109
7.71
INDUS_TMP_INDX01
1,873
0
11.48
13.62
231
0
0
0.00
INDUS_MST_INDX01
256
0
13.09
1.04
194
0
2
10.00
UNDOTBS1
70
0
1.86
1.00
60
0
0
0.00
STG_DATA01
63
0
1.27
1.00
60
0
0
0.00
USERS
63
0
0.32
1.00
60
0
0
0.00
INDUS_LOB_DATA01
62
0
0.32
1.00
60
0
0
0.00
TS_AUDIT
62
0
0.48
1.00
60
0
0
0.00
18th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
980,283
91
1.40
4.74The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
You wrote with different execution plan, I think, you saw plans. It is very difficult, you get old plan.
I think Execution plans is not changed in different days, if you not added index or ...
What say ADDM report about this script?
As you know, It is normally, different Elapsed Time for same statement in different day.
It is depend your database workload.
It think you must use SQL Access and SQl Tuning advisor for this script.
You can get solution for slow running problem.
Regards
Mahir M. Quluzade -
I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Design a single template for multiple reports with different column order
Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
for Example...
if(?Client in ['clientA','clientA']) then
<TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM -
BO xi 3.1 u2013 schedule a template for multiple reports with different column
Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan -
I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?
In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
Then resync with your iPhone and all will be well. -
How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?
Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
(74502) -
Why can't two different users use Itunes on the same computer with different log ins
Why can't two different users use Itunes on the same computer with different log ins
Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching. -
CAn I run Lion and snow leopard on the same computer with different sign-ins?
CAn I run Lion and snow leopard on the same computer with different sign-ins?
Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.
-
Can you have 2 ipods on the same accounts with different play list?
Can I have 2 ipods on the same accounts with different plalists?
Sure. Each iPod is identified in iTunes with its own name and you configure each one as you wish:
Maybe you are looking for
-
Printer driver for HP Laserjet m1132
I've recently switched to a mac with everything updated (version 10.9.5) and I'm trying to install a driver for printer laserjet m1132. I followed each and every steps: system preference > printers and scanners > selected + > (selected the printer)
-
Pre-requisites and steps for uploading chart of accounts in sap r/3
Hi, I am a fresher in SAP FI. I have a completly new set of Chart of Accounts which i need to upload in the system. How do i do it and are there any pre-requisites for the same i.e variants to be defined and assigned completly before uploading the Ch
-
i use the following link to point to a page (1) with a interactive report, but still all rows are shown and no filter is displayed: http://host:7000/pls/apex/f?p=104:1:3808170029937402::YES:1,RIR:IREQ_LOCATION:HSV whats wrong? here are the debug mess
-
GL Account not display in F4 possible values.
Dear, All Experts. I have defined around 120 GL accounts in FS00, But when at the time of any GL entry in F-02 or FB50 doing F4 for possible values I am not able to see list of GL accounts. Any technical settings needs to be done for this ? or any ch
-
Is there a gnome 3 WICD applet available?
i'm currently running gnome 3 with wicd as my internet interface... and it works great, i installed the wicd-gtk package so i had an easy to access icon in the notification bar (bottom right corner). but i'm a little jealous of the more prominent ne