Print sample draw instruction

Hi
I am facing problem with printing sample drawing proceducre
for inspection type 04
Print is checked for MIC and inspection type
when I do GR, the session is terminate with message program RQDSES10 not found
same error - when i try to do QA02
But this program is in configuration
what would be the reason for this error
Any info is most welcome
Thanks
Sami

Dear,
Please refer OSS note 183355 it will solve your problem.
Regards,
R.Brahmankar

Similar Messages

Sampling Drawing Procedure

Hi Experts,
Can anybody please explain me in short,
Primary sample
Pooled sample
Reserve sample
Edited by: Raja S on Jan 29, 2009 7:23 AM

Dear Raja
Primary samples
Physical samples drawn directly from a material or batch that will be inspected or used to create pooled samples.
pooled samples
Physical samples to be created by mixing the contents of two or more primary samples from the same material or batch.
Reserved Samples
Primary physical samples drawn from a material or batch reserved for future inspection.
In each sample-drawing item, you must specify how many primary, pooled, and reserve samples should be created. For primary and pooled samples, you can:
Specify a fixed number of physical samples.
Allow the system to determine the number of physical samples automatically on the basis of a sampling scheme.
You can specify only a fixed number of reserve samples.
For primary and pooled samples, you can also enter a factor that instructs the system to create a greater quantity of physical samples than you need for the current inspection. For example, if you specify a factor of "3," the system creates sufficient quantities of physical samples for you to carry out three inspections.
Hope this helps
Regards
gajesh

Quality management( difference between sampling procedure & sample drawing)

Hi Experts,
I am very new to quality management module & working in united states. i am trying to find difference between sampling procedure & sample drawing procedure.
I see that sample drawing procedure is assigned to Inspection Plan & sampling procedure is assigned to characteristics, But i don't know the difference between these two, Please help me.
Regards,
Seshu

Hi,
SAMPLING PROCEDURE :
A procedure that contains the rules for determining the sample size for an inspection. The sampling procedure also specifies the type of valuation to use for results recording (attributive, variable, or manual).
Use
You assign a sampling procedure to each characteristic in an inspection plan to calculate the sample size.
Integration
In a sampling procedure, you must activate the function for inspection points based on a sample-drawing procedure if you assigned a sampling procedure and a sample-drawing procedure to an inspection plan at the characteristic and header levels respectively.
SAMPLE DRAWING PROCEDURE:
Definition
A master data object in which you plan the drawing of physical samples. In the sample-drawing procedure, you specify:
Which categories of physical samples must be drawn
How many physical samples must drawn
The size of each physical sample
Whether the drawing of physical samples must be confirmed
Use
The system uses the information in the sample-drawing procedure together with the information in the inspection plan to calculate the physical sample sizes, and to create physical-sample records when an inspection lot is created.
Structure
A sample-drawing procedure contains the following types of information:
Header data
The sample drawing header contains the following information fields and control indicators:
Key that identifies the sample-drawing procedure
Short text description for the sample-drawing procedure
Authorization group that limits the access to the sample-drawing procedure
Text for matchcode searches
Long text indicator
Indicator for calculating the number of physical samples on the basis of number of containers in the inspection lot (as opposed to the base unit of measure)
Confirmation indicator to activate or deactivate the confirmation requirement
Lock indicator to prevent the sample-drawing procedure from being used
Usage indicator that shows whether the sample-drawing procedure is currently used in an inspection plan
Sample-drawing item(s)
A sample-drawing item contains specific instructions for creating physical samples with respect to a specific inspection lot container type and specific partial-sample numbers in the inspection plan. In a sample-drawing item, you can also specify:
Which categories of physical samples you want to create (primary samples, pooled samples, and reserve samples)
The physical sample container you use to draw each category of physical sample
A factor to increase the quantity of physical samples to be created (for example, if you need to carry out more than one inspection)
The number of physical samples to be created (fixed number or variable number based on a sampling scheme)
Integration
The sample-drawing procedure interacts with the following planning objects:
Inspection plan
You assign a sample-drawing procedure to an inspection plan to activate the functions for sample management.
Sampling scheme (optional)
If you want the system to determine the number of physical samples automatically on the basis of a sampling scheme, you can reference sampling schemes in a sample-drawing procedure.
Hope it helps...
Regards,
Priyanka.P
AWARD IF HELPFULL

When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

Usual cause: printing at the wrong aspect ratio for the image - trying to print 5 x 3 in the shape of a 6 x 4 for instance.
Regards
TD

Why is printing a drawing in PDF format so slow?

This is our first time using a wide-format printer (HP DesignJet 800PS). We receive construction drawings in PDF format. Printing size vary from 17" x 11" to 40" x 33". When I print a one page drawing, it takes about 20 minutes to print in normal mode (as opposed to Best or Draft). The printer is connected directly to our router via an ethernet cable. This is a small office with only 2 people connected to the router and this is the only printer connected to the network.
Is it normal that it takes this long to print a single page or is something wrong with our printing setup? When we sent multiple PDF drawings to the printshop in the past, they would be ready in minutes.
I am printing from a Windows XP computer using Adobe Reader 9.5.

I am not sure about the printer driver. The driver name is HP DesignJet 800PS 42 PS3. How would I go about checking if the installed driver is a PostScript one since I wasn't the one who did the installation?
I should also mention that I've been experimenting with it the last couple of hours and while it prints alot faster in Draft mode, without seemingly losing vital details, it does take about 5 minutes for the printer to begin the actual printing.
I'm also struggling to get the drawings to print to scale and completely. The PDF file shows the page is 49" x 35.5". When I print it, despite having tried portrait and landscape, it will not print in the right direction. I'm thinking it might have to do with the page size that I selected. I selected ARCH E which is defined as being 36" x 48" and change the rotation to match but that's not working out as it cuts out part of the drawing. There is an option to scale the printing to the dimension I enter but should I really need to go through that everytime I print a drawing of different size?

Fetching the latest drawing No. after changing Sampling Drawing Procedure

Hi QM Masters,
I have 1 Report in that I fetch Drawing No. against Inspection Lot.
When I create a Inspection Lot at that time Drawing No. will generated in the system. Sampling Drawing procedure is assigned to the Lot. But the problem is that When I change the sampling procedure New Drawing No. is generated against the same lot.
Both Drawing No. are updated in QPRS table against the same lot. That's why It is difficult to fetch the latest Drawing no.
How I fetch the latest drawing no. after changing the SDP?
Gives me the Expert logic to fetch the data.

Hi can you check the fields ENTDATUM and ENTZEIT for sample drawing date and time or this date is different for you in the same table QPRS
Regrads,
Smruti
Edited by: smruti.ranjan on Feb 7, 2012 12:02 PM

Confirm Physical-Sample Drawing

Hello,
Are there any other way to release a physical-sample drawing other than QPR4? I'm trying to release a physical sample however I encounter this error "Physical-sample drawing ###### was not confirmed. Call the program "Process physical-sample drawing" and confirm the physical-sample drawing ########."
QPR4 is fine when releasing it manually, but what I'm trying to do is having it in BDC, and since QPR4 is in ALV format it is not supported in BDC. That's why I'm looking for an alternative way to confirm the drawing.
Thanks in advance
uniox

Hi
Use SHDB & copy this code & call this button in BDC
This will work in Mass
Regards
Sujit

HP Deskjet 5940, Properties, "give print sample'' doesn't work right.

When I want to see a print sample before the real print will be started - I did define this- then I see an old print sample. When I ignore this and make the real print, it is the print that I really wanted. When I repeat this action then I get the real print sample. Only after a restart of the computer the problem is there again: I see the same old print sample, only the first time. So that old print sample sticks in the memory and I see it always and only when I order the first print after the startup of the computer. The real print will be given anyway.
This question was solved.
View Solution.

What OS are you using?
What program are you trying to print from?
HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems: The HP Print and Scan Doctor. HP recommends that you download and install the Print and Scan Doctor any time you need to troubleshoot a problem with your HP printer from the link below.
Let me know what errors you receive?
HP Print Utilities Page
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Physical sample and physical sample drawing relationship

Dear all,
When an inspection lot is created in a inspection plan using sample drawing procedure to determine physical sample size, the following two objects created automatically.
Physical Sample Drawing Number
Physical Sample Number
The relationship between these two objects is... one physical sample drawing number can represent more than one physical sample record, am I correct?
Thanks
Karen

Physical Sample Drawing Number : it represents unique number for physical sample
Ex. if you sampled 100 pcs SAP gives Numbe Number for this 100. pcs
Physical Sample Number it gives the number for bifurgation of this qty.
Ex. out of 100 pcs 20 is physical sample 20 for pooled and remaining is reserve etc.
Cheers,

Difference between Sampling Procedure and Sample-drawing procedure

Friends,
I am new to QM and started learning QM Module. My doubt is what is the difference between Sampling Procedure and Sample-drawing procedure?
The reason for my doubt is, we can determine the sample quantity with Sampling procedure itself. then what is the need of sample-drawing procedure?
Also describe primary, pooled and reserved samples.
Regards,
IMIMINT

Hi,
Sampling Procedure
Definition
A procedure that contains the rules for determining the sample size for an inspection. The sampling procedure also specifies the type of valuation to use for results recording (attributive, variable, or manual).
Use
You assign a sampling procedure to each characteristic in an inspection plan to calculate the sample size.
Sample-Drawing Procedure
Definition
A master data object in which you plan the drawing of physical samples. In the sample-drawing procedure, you specify:
Which categories of physical samples must be drawn
How many physical samples must drawn
The size of each physical sample
Whether the drawing of physical samples must be confirmed
Use
The system uses the information in the sample-drawing procedure together with the information in the inspection plan to calculate the physical sample sizes, and to create physical-sample records when an inspection lot is created.
Primary Sample : It is the sample drawn from the lot directly.
Pooled Sample : It is the sample whcih is combination of 2 or more primary samples.i.e. primary sample sfrom say 3 differetn drums is mixed and tested.
Reserved Sample :sample which is preserved for the testing in future.
or in other words
Primary samples (1st stage)
Physical samples drawn directly from a material or batch that will be inspected or used to create pooled samples.
Pooled samples (2nd stage)
Physical samples to be created by mixing the contents of two or more primary samples from the same material or batch.
Reserve samples
Primary physical samples drawn from a material or batch reserved for future inspection.
Vishal
Edited by: VISHAL JONNALWAR on Feb 4, 2010 6:43 AM

HT1338 i already install hp 6500a on my macbook air but everytime i am printing, it prints the hp instruction but not what i am printing. they said i need to update my software to IOS. how?

i already install hp 6500a on my macbook air but everytime i am printing, it prints the hp instruction but not what i am printing. they said i need to update my software to IOS. how?

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

Sample drawing long text

Hello,
How to upload the sample drawing long text using LSMW?
can u pls advice me.
Thanks
Sou

Hi Bhanu,
I am using same program,in that i hava some douts like..
i am traying to upload long text using T.code QPv2.
in that One drawing prcodere several partial numbers like 10,20 etc..
my requirment is they are giving one drawing procedure and different partial nos,in the parial nos we have multiple line texts.
in LSMW how to maintain parial numbers realted..
Please suggested me.
Thanks
Sou

Sample Drawing Procedure & Sampling Procedure

Dear All,
I am little confused between Sample Drawing Procedure and Sampling Procedure
1) During Sample Size Calculation what's the roll of both Object?Is there any relation between this two object?
2)And During Automatic Creation of quality lot on which factor Lot size is depend Particular in Stability Study
Regards,
Murari Shah

1) During Sample Size Calculation what's the roll of both Object?Is there any relation between this two object?
Refer
Difference between Sampling Procedure and Sample-drawing procedure
QM - SAMPLE DRAWING PROCEDURE
QM Sample procedure, sample drawing procedure, sampling schemes
2)And During Automatic Creation of quality lot on which factor Lot size is depend Particular in Stability Study
sampling procedure plays role in sample size of inspection lot

Check printing "Format Payment Instructions" stuck at printing phase

Hi,
One of our end users is complaining that he is running a Check Print Request (Format Payment Instructions), which is running since morning, though it completes within 2 minutes.
when i checked the logfile, i found that the request processing was completed successfully and the request is stuck at printing phase:
Request log:
Successfully executed PL/SQL.
Exit: iby.scheduler.FDExtractAndFormatting.unlockInstruction()
Request Completed Normally
Enter: iby.scheduler.FDExtractAndFormatting.queryAcpLtr
Accompanying letter format code: null
End time: Wed Jan 12 10:09:41 GST 2011
Time elapsed: 3459
Time elapsed: 0 min 3 sec 459 ms
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 23800025
Number of copies : 1
Printer : ptfchqprn
Since morning, the request is running and log is showing the same message.
Now, the user is saying that till 2 days back, he was able to print the checks via the same printer.
Here is the log of the same request ran by the same user. This request printed the check successfully.
Successfully executed PL/SQL.
Exit: iby.scheduler.FDExtractAndFormatting.unlockInstruction()
Request Completed Normally
Enter: iby.scheduler.FDExtractAndFormatting.queryAcpLtr
Accompanying letter format code: null
End time: Mon Jan 10 11:37:30 GST 2011
Time elapsed: 2339
Time elapsed: 0 min 2 sec 339 ms
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 23783976
Number of copies : 1
Printer : ptfchqprn
Finished executing request completion options.
I verified that the printer is working fine. I was able to print the sample file from OS and also the Active User Request output.
Also, the same request if printed via other check printers, is going fine and users are able to print the check.
Also, when i checked the OPP log, i did not find any messages for this request that the XML publisher has worked on it to convert it to PDF, the desired format.
Can someone help me with this.
thanks.

What is the application release? OS?
- solaris sparc - 64, R12.1.1, on 2 node RAC 11g
Since morning, the request is running and log is showing the same message.
Have you tried to submit the request again?
- Yes, more than twice.
Now, the user is saying that till 2 days back, he was able to print the checks via the same printer.
What if you submit the request as another user and print to the same printer?
- That I have to check with the Users.
I verified that the printer is working fine. I was able to print the sample file from OS and also the Active User Request output.
Any stuck jobs in the printer queue?
- We restarted the printer too and fired new jobs. All is fine.
Also, the same request if printed via other check printers, is going fine and users are able to print the check.
Since you are able to print the same request to some other printer, and you are able to print to the same printer from the OS/Application, then most probably this is an issue with that specific concurrent request (not concurrent program). Also, please check if you have any locks in the database (bounce the CM/Database if possible and try again).
- CM and Database are brought down at night and then started in the morning every night. So DB and CM have been bounced twice since the issue was reported.
Hussain, how can we check the issue with Conc Request, if any.

How to print a report on local/network printer(Sample Code)

Hi forms Gurus,
I'm looking for sample code witch allow to print report on local/network printer from Forms builder.
Plz help! it's very important.
TYAG.

Armand,
for Forms and Reports 9i, the only chance is to configure the printer as a network printer that is accessible to the Reports Server. In this case pass the printer's network name as desname and destype=printer as the Reports destination (e.g. desname=\network\printername destype=printer).
Alterantively, there exist an unsupported utility orarrp that you can get from the otn.oracle.com/products/forms web page.
Frank

Print sample draw instruction

Similar Messages

Maybe you are looking for