Print Samples

I would like to take small (2" X 2" approx.) samples of critical areas of a large image, arrange them as a collage on a smaller sized image and print these samples out so that I can evaluate the samples before committing to making a full sized print. I believe that this would be an effective technique in reducing the amount of wasted paper and ink. I have tried selecting small sections of a print but have been unsuccessful in creating a collage of multiple samples.

Hi,
Please use the following link (under "Manage Print Apps" to cancel/remove it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp...
You may also get this:
My Print Apps
To view and manage print apps for your printer, use the display on the printer itself. This website cannot manage print apps for your printer. In this case, you have to cancel from your printer.
Please also try this (if the above mothod did not help):
http://h10025.www1.hp.com/ewfrf/wc/clc?tmp_showAll=false&destPage=document&cc=us&dlc=en&docname=c031...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Deskjet 5940, Properties, "give print sample'' doesn't work right.

When I want to see a print sample before the real print will be started - I did define this- then I see an old print sample. When I ignore this and make the real print, it is the print that I really wanted. When I repeat this action then I get the real print sample. Only after a restart of the computer the problem is there again: I see the same old print sample, only the first time. So that old print sample sticks in the memory and I see it always and only when I order the first print after the startup of the computer. The real print will be given anyway.
This question was solved.
View Solution.

What OS are you using?
What program are you trying to print from?
HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems: The HP Print and Scan Doctor. HP recommends that you download and install the Print and Scan Doctor any time you need to troubleshoot a problem with your HP printer from the link below.
Let me know what errors you receive?
HP Print Utilities Page
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Print sample draw instruction

Hi
I am facing problem with printing sample drawing proceducre
for inspection type 04
Print is checked for MIC and inspection type
when I do GR, the session is terminate with message program RQDSES10 not found
same error - when i try to do QA02
But this program is in configuration
what would be the reason for this error
Any info is most welcome
Thanks
Sami

Dear,
Please refer OSS note 183355 it will solve your problem.
Regards,
R.Brahmankar

How to print a report on local/network printer(Sample Code)

Hi forms Gurus,
I'm looking for sample code witch allow to print report on local/network printer from Forms builder.
Plz help! it's very important.
TYAG.

Armand,
for Forms and Reports 9i, the only chance is to configure the printer as a network printer that is accessible to the Reports Server. In this case pass the printer's network name as desname and destype=printer as the Reports destination (e.g. desname=\network\printername destype=printer).
Alterantively, there exist an unsupported utility orarrp that you can get from the otn.oracle.com/products/forms web page.
Frank

How can I stop my photosmart 7520 printing Samples, Bookmarks and various other pictures ?

Every morning the printer automatically prints various Dreamworks pictures, childrens bookmarks, samples of masks and origami and is wasting huge ammounts of ink. how do i stop this please. HP Photosmart 7520 connected to a mac

Hi there,
If you have previously setup some scheduled print deliveries, you will need to cancel these from where they were originally setup.
They were most likely setup through your e-Print centre login so you should be able to cancel them there. Here's a link to some infomation on Managing Scheduled Delivery Print Apps:
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Printing samples in font book

is there any way to print font samples from Font Book - in os 9 i used a type book shareware or even from atm deluxe to print single sheet samples of each font.
is there third party shareware - I looked at zdnet and the app they had was no longer up.

Hello sue,
FontBook is a good one. Shareware fee is only $10. Has quite a few different layouts to choose from. You can try it out before buying.

Need Blue print sample of BI

My mail id:
[email protected]
I have to do Blue printing for the BI as an part of implementation going in our company ( partner is SAP india), i need some document sample which helps me in Blue printing the BI.
thanks,
regards.

Hi Scruz,
Check this link where you can download the solution scopt doc.
http://help.sap.com/bp_biv235/BI_EN/html/Business_Blueprint.htm
here is the doc you need:
http://help.sap.com/bp_biv335/BI_EN/documentation/SolutionScope_EN.doc
Business Blueprint
In this phase you create a blueprint using the Question & Answer database (Q&Adb), which documents your enterprises requirements and establishes how your business processes and organizational structure are to be represented in the SAP System. You also refine the original project goals and objectives and revise the overall project schedule in this phase.
check these link's as well.
what does business blue-print consist?
http://iris.tennessee.edu/Blueprint/BW/BW-Blue%20Print-Final.doc
http://help.sap.com/bp_biv235/bi_en/html/BWspecific_Info.htm
http://help.sap.com/bp_biv235/bi_en/documentation/Multi-dimensional_modeling_EN.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2b50ac90-0201-0010-d597-8d833833f9e0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/828d9590-0201-0010-95a7-ea8cf8814b94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
http://www.sap.com/services/servsuptech/bestpractices/index.epx --- look for blueprint
Also for Bw case studies u can refer to these links
http://help.sap.com/bp_biv135/index.htm
http://service.sap.com/bi .
Check this post:
/message/1447350#1447350 [original link is broken]
Hope it helps.
****Assign Points If Helpful****
Regards,
Ravikanth

Printing text using jdk 1.4...only first character in string output

I have read way too many forum postings and still can't get simple ascii to come out my printer. Please don't point me to awt printing samples. I don't want the overhead/baggage of graphics contexts when they shouldn't be needed.
If I create a printer that's a file (set to generic/ascii), then after printing and giving a filename the file contents look ok. So, this seems to be a DocFlavor issue or something.
However when I try to print to a network printer (usb attached), I only get at best a single character on my page.
The following is tracing from my print method (shows text to be printed and doc flavors supported by printer):
PrinterImpl::print(text=hello world)
image/gif; class="[B"
image/gif; class="java.io.InputStream"
image/gif; class="java.net.URL"
image/jpeg; class="[B"
image/jpeg; class="java.io.InputStream"
image/jpeg; class="java.net.URL"
image/png; class="[B"
image/png; class="java.io.InputStream"
image/png; class="java.net.URL"
application/x-java-jvm-local-objectref; class="java.awt.print.Pageable"
application/x-java-jvm-local-objectref; class="java.awt.print.Printable"
application/octet-stream; class="[B"
application/octet-stream; class="java.net.URL"
application/octet-stream; class="java.io.InputStream"
It appears, that besides copious image printing support (why PNG and not TEXT?!?!?!?) I can print Printable's from the awt api, as well as byte arrays and input streams. I wish to not use the awt printing api.
I have tried all mentioned DocFlavors regarding BYTE_ARRAY.AUTOSENSE, etc. Nothing gives me more than a single character of output.
Any ideas? I'm getting a little burnt out on this problem.
Thanks.

I cannot comment on the 2 examples you referenced, because I don't have a Postscript printer, but your own example does not work, at least under Win2K, neither on a USB nor an ASCII printer, here is why (aside from the fact that it contains 2 or 3 formal errors).
I am trying desparately to print a simple ASCII file on a USB printer under Win2K since weeks and found 2 problems, but no solution so far.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Java PrintServiceLookup.lookupPrintServices() returns nothing
=============================================================
I want to print a simple ASCII file on a USB printer under Win2K and found 2 problems. Here is the 1st one.
PrintServiceLookup.lookupPrintServices(<DocFlavor>, <AttributeSet>) returns nothing when I specify any AttributeSet:
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
I tried
aset.add(new Copies(1));
or
aset.add(MediaSizeName.ISO_A4);
I tried it with JDK 1.4.2 and with Java 6, same problem.
When I specify null for AttributeSet, I get as many services as I have printers specified in the Printers folder of the Control panel.
I have scanned quite a few contributions about this subject, and it looks like this problem has been around since years, but I haven't found a solution.
But there is a circumvention of the problem for a parallel printer (at least an HP Laserjet 4 Plus): forget lookupPrintServices, just use the default printer. It works. Here are the essential code lines to print a simple ASCII file in Win2K.
//String fileID = = args[0];
FileInputStream textStream = new FileInputStream(fileID);
PrintService defService = PrintServiceLookup.lookupDefaultPrintService();
DocFlavor myFormat = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(MediaSizeName.ISO_A4);
DocPrintJob job = defService.createPrintJob();
Doc myDoc = new SimpleDoc(textStream, myFormat, null);
try {
job.print(myDoc, aset);
} catch (PrintException pe) {
System.out.println(pe.toString());
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Cannot print on a USB printer with Java PrintService
====================================================
I want to print a simple ASCII file on a USB printer under Win2K and
found 2 problems. Here is the 2nd one.
Even though
PrintServiceLookup.lookupPrintServices(<DocFlavor>, <AttributeSet>)
returns nothing when I specify any AttributeSet, I can still print on the default printer, which I get by
PrintService defServicedefService = PrintServiceLookup.lookupDefaultPrintService();
but only on a parallel printer (HP Laserjet 4 Plus), either directly attached or over the network. When I try the very same code on a locally USB-attached printer, the printer is obviously reacting, but nothing is printed.
In case of a Lexmark 730 (an ink printer), the driver even lies, it has printed 100%,
on a Samsung CLP-510 (a color laser) the ready light flashes twice, that's all.
The file to be printed has 5 lines and a "0C"X at the end in order to force a page eject at the end.
I tried it with JDK 1.4.2 and with Java 6, same problem.
I should mention that I can print that little file out of the editor Textpad without any problem.
Edited by: eSchobbert on Jan 30, 2008 7:26 AM
Sorry I forgot to mention, that this post refers to the pretty old post of MartinHilpert of May 22, 2003 2:45 AM

3D Printers supporting Windows 8.1 direct printing API

Hi,
Does someone know which 3D printers have drivers that are supported by the Windows 8 API? (http://msdn.microsoft.com/en-us/windows/hardware/bg183398.aspx)
It seems to work with 3D System's Cube 2 (http://blogs.windows.com/bloggingwindows/2013/08/22/3d-printing-support-in-windows-8-1-explained/), but I've tried my Cube 3 with, e.g., the 3D Builder app (http://apps.microsoft.com/windows/en-us/app/3d-builder/75f3f766-13b3-45e9-a62f-29590d5781f2),
and Windows won't find the printer.
Thanks!

There is a code sample on MSDN code gallery, you can try running it to find more information. https://code.msdn.microsoft.com/windowsapps/3D-Printing-Sample-b5b75c86/

Pdf document setup for print issues

Hey all,
I just happened to have a friend who is getting married asking me to make their invitations. I am not at all familiar with the print process (I'm a noob, just getting started), but managed myself to go with a print house that offers me guidelines about how to prepare my final artwork for them to print ( outline texts, line work no thinner than .5pt, Coated fogra 39, PDF/x-1a, no flattened artwork, cmyk values... I think I'm not forgetting anything).
I followed all the instructions and saved my PDF, but when I open it to previz, I get a horrendous result :O !
All the artwork seems to "break" (you know, sawed edges), but what's more worrying, is that there are kind of very thin gaps, transparent ones, that appear, as if I had the document sliced. I've opened the pdf in Photoshop, and added a red layer background to save a copy and insert it here, see if anyone can help me out on this one.
I would greatly appreciate your feedback,
Thanks and enjoy the weekend, those of you who can!
So any red slice that appears on my attached converted PDF document, is in fact transparent.
Ok uploader image tells me that "this type of image is forbidden"... Go figure!
anyways, if anyone is familiar with this issue and can help me out, please, you will save the date (and my life haha)

@silkrooster Image size is as requested for print by the print house: 1795 x 1287 pixels (300dpi), it will be printed on a A6 (european standard) and size (with bleed and all):
152mm x 109mm
5.98” x 4.29”
(300 dpi)
@Ton Frederiks
I do have all the original artwork in Illustrator, just wanted to check the resulting PDF Export in other apps... You know, curiosity killed the cat hahah... You explanation makes very much sense, although I'm a newbie, but I thought it might be something of that nature... I do hope anyway, that I could get a printed sample card before ordering the whole bunch... I would not like at all to ruin my friends wedding...
I have so much admiration for you all print artists and illustrators! I love that universe, but also am aware of the complexity and extended knowledge one must have... But hey, you gotta start somewhere!
Thanks a bunch, I'll have to wait on Monday to see what the Print House tells me, and hope not to have to bother you all anymore with this!
Have a great one!

How to increase the font size of print ouput in SAP 4.7

Hi,
How to increase the font size of the ouput of Write statement on PRINT ? in 4.7
THANKS IN ADVANCE
MOOSA

You can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program

Check print setting in ZRQDSES20

Hi gurus,
My program is a copy of the standard one RQDSES20 for printing sample drawing instruction. Based on the setting in the control key of the inspection plan, I would like to automatically print or not print sample drawing instruction @ MIGO. The standard program does not check operation control key and SAP does not want to write a correction instruction as they did in oss note 441035 for the printing program of inspection instructions. They gave me some advice, but I'm unable to let it work:
IMPORT prlst_tmp
       lsproben          TO g_lsproben
       qamvtab           TO g_qamvtab
       qapotab           TO g_qapotab
       qasvtab           TO g_qasvtab
       qmhutab           TO g_qmhutab
       qpmltab           TO g_qpmltab
       i_qals            TO qals
       i_first_print     TO g_first_print
       i_print_message   TO g_print_message FROM MEMORY ID 'QM_PRT01'.
move g_qapotab-vorsteus to l_vorsteus.
CALL FUNCTION 'T430_READ'
EXPORTING
    spras                 = 'EN'
    steus                 = l_vorsteus
    MSGTY                 = 'S'
IMPORTING
   struct                 = l_t430
         TEXT           =
        EXCEPTIONS
          no_entry       = 1
          OTHERS         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF l_t430-vrgd IS INITIAL.
prlst_tmp-copys = 0.
ENDIF.
During debugging ( in the globals tab) I can see g_qapotab getting filled, also the field g_qapotab-vorsteus gets his value 'ZQM5', but when I want to use this value l_vorsteus stays empty.
Can any one help?
Thanks,
Suzy

Closed

Printing Postage labels problems

I purchased a new HP p6203 computer with Win 7 Home Premium 64 bit O/S....
I Attached my not so new H/P c4240 printer which worked fine with Win XP... now when I try to print a Postage label via the U.S.P.S with Paypal that use Pitney Bowes system, it will only print 1/2 of the page with the word "SAMPLE " in red thru it.I have tried both buttons ,meaning the "Print Label button" and the "Print Sample Label" button ,both with the same results.
I am just trying to narrow the problem down .... H/P... the U.S.P.S....Pitney Bowes....Win 7
,or a new printer driver for the C4240 for Win 7 ??? ,any help would be appreciated . Thanks, Yorkvette

Ohhkays.. Can you try installing Reader 10.1.2 from http://get.adobe.com/reader/enterprise.
And then follow the instructions as indicated on: http://kb2.adobe.com/cps/928/cpsid_92870.html to see if it fixes the print issue on your end.

RGB colors when ordering prints?

I've been working on a high sports team poster, designed in Photoshop Elements. I hope to get it printed through the iPhoto on-line service.
The background color was set in PSE by using the RGB values of the school colors. Will this information be used when it is printed? The red looks a bit pale on my inkjet printer sample and I was hoping that higher quality printers could take advantage of the info for more accurate color.

As long as the image file has the standard RGB color profile, the colors should be reproduced faithfully. I have PSE set to embed the sRGB IEC61966-2.1 color profile whenever saving a jpg file.
I've not ordered prints from Apple so can't attest to the accuracy of the color. However, if they are way off Apple has been good at making things right.
OT

3D Bar code printing

Hi,
I was asked to print sample documents using 3D Bar code. Does anyone have any idea on this? Any hints would be really helpful.
Thank you,
Chandra

Hi
Do u want it in scripts or smartforms???
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Only Se71 is used to create a barcode
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Check this link
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
http://www.erpgenie.com/products/synappcode.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
New barcode printing for smartforms
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
http://www.zebra.com/cpgn/pdfs/SAP_universal.pdf
Reward all helpfull answers
Regards
Pavan

Print Samples

Similar Messages

Maybe you are looking for