Print SD moves throught MIGO

Hello ppl, i know that this can be done, but i cant do it, i want to print via MIGO some SD movements like 601, 602,631 and 632.
When i display the material document in MIGO, and check the checkbox with collective slip, a message appears, "The system could not create any outputs", I which configuration I need to do? thanks!

Hello and thanks for the answers, unfortunately the replies that u gave me doesnt work at all, i maintain the mn21, the Output type, WE03 and WA03, and i still have the same issue, i configured just as u told me, and also add to my profile in SU01 the parameter NDR, this parameter doesnt check the box in MIGO Display mode, only when i create a new GR. The message still appears "The system could not create any output", if i go to the help button this information displays:
The system could not create any outputs
Message no. MIGO032
Diagnosis
Output determination was unable to find any valid condition records.
Possible resons:
Output determination has not been configured properly in Customizing.
A material document printout is not planned for the movement type.
Procedure
Check whether
the condition record has been maintained properly
the KZDRU indicator has been properly set for the movement type
Maintenance of this object is carried out via Customizing.
Make the appropriate settings in Customizing as necessary or inform your system administrator
Maybe this aditional info can help u guys with my problems, thanks a lot!

Similar Messages

Print Check Box In MIGO

Hi ALL,
I'm having an issue with print check box in migo .
I created a po and i created a material document(i.e Goods Recipt) in MIGO using the PO nUMBER. I made sure i selected Collective Slip and Print Check Box enabled and posted the document and when i went back to PO and looked at PO History and clicked on the GR Receipt it shows me the Material Document but for some reason the Print Check box is disabled .
Again this happens if i create a po with one particular plant and if i use any other plant it works fine and print check box remains enabled.
I made sure in OMJ3 ,WA03 AND WE03 i have the Plant,St Loc and Printer for the plant WHICH IS CREATING PROBLEM.
Let me know if i'm missing something in here
Thanks
Venki

Hi all,
The same movement type works for all other plants except for one plant .
No matter what movement type is, this plant is always disabling the print chek box for some reason.
Let me know
Thanks

I want to print a Movie Playlist that includes the description

I want to print my movie listing that would include the description.
Any ideas on how to do this??
The default print settings does not seem to allow this.

Print as a song list. Use the custom option. That prints the list using your current view. Use the View menu > View Options to select or deselect columns.

Short Dump While Printing Good Receipt Using MIGO

I have copied standard program /SMB40/M07DR for printing Goods Receipt from MIGO for a purchase order.
I am getting a dump: ST22 (POSTING_ILLEGAL_STATEMENT)
Error analysis
    There is probably an error in the program
    "SAPLKKBL".
    This program is triggered in the update task . there, the
    following ABAP/4 statements are not allowed.
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTI
    - SUBMIT
Looked for many SAP NOTES but no luck.

When i check the short DUMP in ST22 , it gave me this information ..!!!!
error analysis
There is probably an error in the program
"SAPLKKBL".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "POSTING_ILLEGAL_STATEMENT" " "
    "SAPLKKBL" or "LKKBLU01"
    "K_KKB_LIST_DISPLAY"

How to print a Movie clip inside uiLoader?

Hi,
I;m making a flash application in AS3, and I've got a little problem.
Which is here...
Here is my code....
/* Print Button Function Here.....*/
print_btn.addEventListener(MouseEvent.CLICK,printPage);
function printPage(evt:MouseEvent) {
    var printJob:PrintJob = new PrintJob();
    if (printJob.start()) {
        if (uiLoader.source.width>printJob.pageWidth) {
            uiLoader.source.width=printJob.pageWidth;
            uiLoader.source.scaleY=uiLoader.source.scaleX;
        printJob.addPage(uiLoader.source);    <------------ Error shows Here
        printJob.send();
Actually I have a movie clip which contains a Print Button and a uiloader.
uiloader loads differnt external movies.
I applied a code to Print button to print those movies.
But FlashProgram shows an error.
which is Here....
Scene 1, Layer 'Actions', Frame 2, Line 174
1118: Implicit coercion of a value with static type Object to a possibly unrelated type flash.display:Sprite.
Please tell me how to fix it.
thank you...

Thank you very much it's been really helpfull.
Now it's working but there are two more issues which i want to dicuss now.
1st issue is, it print the both movies (main movie & external both) but i only want to print that one which inside the uiloader only.
2nd issue is, actually this application which I'm making is for users to apply various paints on roofs and walls to check how they looks.
The issue is it only print the actual movie colors not those colors which have been currently applied. Or what i'm trying to say is that, " how can I print uiloader source movie with it's current colors settings?"
thank you.

Error in Printing Material Document in MIGO (movement 561)

Hello everyone!
Kindly assist me with this. We are trying to print an output document in MIGO. We have set up the Output type WA03 in NACE and in MN21. When we started printing the document, an express message was generated stating that:
Update was terminated
System ID....   E6D
Client.......   100
User.....   MANTOML
Transaction..   MIGO
Update key...   4A08E8ABA95D0096E1008000C0A81447
Generated....   14.05.2009, 15:00:26
Completed....   14.05.2009, 15:00:26
Error Info...   TD 427: Element KOPF
Thank you for you assistance.

Hi,
Please check whether you have defined your element and window properly.
This type of error occurs only when they are not defined properly.
Regards

Printing a movie clip with dynamic text boxes

I've got a certificate inside a movie clip, and i want the
dynamic text box to dispay the user name, but for some reason it is
coming up undefined, even though i have the dynamic text box set to
finalname = _root.inputname, but it comes up as undefined on the
screen. :( Can anyone tell me where i am going wrong?
Is there a way to print just a specific movie clip on the
screen? I can only print all the frames in the movie and without
the dynamic text box... any help would be greatly
appreciated.

assign the mouseChildren property of your movieclip to false.

2010 Excel print preview moves checkboxes

Good day, we have recently received new Sony Vaio's with 64x arch and 2010 microsoft office 64x. In some of my excel workbooks i have check boxes that when checked shade the corresponding cell, in office 2007 it worked great. But now when I select
multiple tabs to view in print preview(with a ricoh printer as the default printer), the checkboxes in SOME of worksheets move to the left and up, and changes the layout on each worksheet after you exit the print preview, (the check boxes move to the left
and get smaller),basically ruining the document and if I do a print preview with Adobe PDF as the printer it does not ruin the layout.
Can anyone help with this issue. Ricoh has had me change to lanier drivers and still nothing has helped yet.

I have the same problem.
I tried all of the suggestions above (unhide objects, repair, hot fix and printer drivers) and these did not work.
The only way to fix the problem for me was to move back to Excel 2007 (with service pack 2).
This fixed all the problems I was having. I have provided some detail below about the problem and what steps I took to analyse and fix in the hope that this may help resolve the problem in Excel 2010.
Background:
I have a spreadsheet originally created in Excel 2002.
It contains a number of List Boxes, Scroll Bars and Drop Down boxes.
On upgrading to Excel 2010 and converting the file to an .xlsm I encountered a number of problems with these controls, including the problem described above.
Note, I upgraded straight to 2010 not via 2007.
My development system is Vista, Office 2010 and a Cannon MP830 printer.
The problem:
As described above if I do a print or print preview the controls get smaller and move left.
Each time I repeat the print or print preview the size gets smaller and the controls move further left.
I also have two controls that move significantly upwards (as they are well down the sheet), suggesting that the movement is actually proportionally up and left (each time I do a print or print preview).
I tried the suggested fixes above (unhide objects, repair, hot fix and printer drivers).
None of these fixed the problem.
Observations:
1) This problem only happens if I print or print preview with more than one worksheet selected.
If I print or print preview with a single worksheet, the problem does not occur.
2)
I tested the same spreadsheet in Excel 2007 on a different machine (running XP 2002 SP3 and a different printer) and the problem did not occur.
3)
I tested the spreadsheet on a different system running Excel 2010 (XP 2002 SP3) with a different printer and the problem still occurred.
4)
I removed Office 2010 from my development machine and installed Office 2007 and this fixed all problems (see other problems below).
I also needed to install service pack 2 for Office 2007 as 2007 had a known problem handling .xlsm files containing macros.
Without SP2 the spreadsheet stopped working totally as the macros were disabled by Excel.
SP2 fixed this problem.
The above clearly suggests that this is an Excel 2010 problem, is not a problem in 2007 and does not seem to be OS or Printer dependent.
Other problems:
Just to complete the story, the other problems I had with controls after upgrading to 2010 are:
1) Some of the Scroll bars and Drop Down Boxes gained a shadow.
This did not happen to all just some. I could find no way to remove the shadow and had to delete the control and create fresh controls.
The controls did not have a shadow in the 2002 version.
2)
When selecting an item from within a list box, the border of the list box moves slightly (like a nudge).
It returns to its original position but the move looks strange.
This movement does not happen if the zoom for the sheet is set at 100% but any other zoom shows the movement.
I have not been able to fix this other than to keep the zoom at 100% (a work around).
This problem does not occur in Excel 2007.
I hope this helps with the analysis, understanding and resolution of the problem as I am struck and will have to revert to 2007 if this problem cannot be resolved in 2010 (and
will need to advise my clients to stay away from 2010).

GI Label Print against movement type

Hi Experts,
While posting the Return Goods Issue (MVT- 202,222 & 262) document, the lable has to print in the Printer.
But as per standard there is no movement type control for the lable print against the Inventory management.
Can you please hlep on this scenerio?
Thanks in Advance,
Regards,
Sudhakar

Sudhakar,
Please be specific , i am not getting you.
what You want, print of reverse document ????
Rgds,
Kareena

GR slip printting issue in TC migo.

Hi All,
i'm trying to setup printer, i have done all setting but still i'm unable to get the GR Reciepts printout in MIGO. any body can help me please.
khan

Pls check the below settings for material document Print out:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

¿Why Print out message in Migo get duplicateg when event 4 in MN22 is selected?

Hello,
I am not able to find out why the print out message get duplicate when I change event 3 to event 4 in MN22.
when I do Good issues in MIGO and the message "ZVAL" is set in event 3 "Send with application own transaction" only one type of message is been trigger in , but if I change event 3 to 4 "Send immediately (when saving the application)" in MN22 all the message get duplicated.
Thanks
Jorge G

Hi,
If you are using your own program in the processing routines for output type, then change it to standard program and form routine in NACE as shown below and test the scenario again. Also check whether any routine is assigned against the output type in the procedure - if so, remove the routine also.
Revert back with the result. If its working fine in this case, you need to check the custom program with the help of your technical team.
Regards,
AKPT

Default print indicator tick in MIGO transaction

Hi all,
I need to set the print indicator for 'Collective slip' ticked by default for all the documents created in MIGO. I have done output determination settings for the same. How to do this? Because what happens is that, sometimes user doesnt ticks the check box and ultimately output doesn't gets saved. When i try to tick it from display mode in MIGO, again output doesnt gets saved. And i am doing it in MB02. Is there a way out to set the indicator(Check box) default for all documents created in MIGO?
Thanks in advance.
Regards,
Raj.

Goto SU3,enter your userid,in parameter tab give NDR and maintain parameter values as X.
regards,
indranil

10gr2 print form moves screen

Anyone have an answer to the problem that using print in forms causes the
focus to move. For example suppose the screen part that needs to be printed
is "far down" the form. When the user selects the print option from the menu,
it scrolls the screen back up to the top of the screen before printing. So it doesn't
seem possible to print anything other than the first screenful of a form.
Any solution. this was jinitiator 1.3.1.28

It worked better in client server. You could move the focus and print what was on
the screen.
Where does oracle get the idea that people want to spend all kinds of effort
developing a form that retrieves data from the database but oh they can't print
because someone decided printing was not a feature for forms? You have to
create a report to print it? That's crazy. Can you imagine MS doing that? (Oh you
use excel data entry to enter/change your spreadsheet, but if you want to print your spreadsheet
you have to create a print spreadsheat?)
When this happened that a very important user found that forms couldn't print the
form data shown on the screen, it was the last straw and the whole implementation was scratched. They are going with a completely different product, platform and people
doing it.
It pushed them over the edge. We really need people in charge of designing programs that
have a clue about usability. The users spend all day using ms office. If any other product
does not have a feature that ms office has it's in deep trouble. There has got to be a better way to enter data in
oracle than web based forms that a product that has made such radical unusability decisions like we don't do printing.
Message was edited by:
lake

Problem in 322 movement in MIGO

Hi all,
I have done the UD stock moves to unrestricted.NowI am trying to revert material from unrestricted to quality in the same storage location by movement type 322 in MIGO transaction.
I am getting this error' change the inspection stock of material in QM only'
Pl. help.
Thanks & Regards,
Vivek Kumar

Hi,
If you want to post the material to QI stockl type, please maintain inspection type "08" in QM view of material master, with checkbox "Post to inspection stock" flagged.
When you do a transfer posting via mvt 311 (MB1B or MIGO), your material will get to QI stock and an inspection lot will be created (use the same SLoc as issuing and receiving SLoc).
Maybe there is a better solution, but I'm not QM expert...
Regards,
Csaba

Printing 302 movements for GI from MB1B

Can someone tell me from were in config 1 can set up output so that 302 movements prints out.
we can print 301 but 302 outputsdoes not print to the spool.
Kind regards

Hi
Check your settings in OMBR for item print indicator, and print version.
In OMB5 check what print indicator is maintained for your movement type 302.
Then you need to do output determination in the below config
spro>MM>inventory management-->output determination.
Then you need to maintain condition record MN21 for your output type and transation key WA and your print indicator and print version. Print version has to be selected when you do MB1b for 302.
Regards
Antony

Print SD moves throught MIGO

Similar Messages

Maybe you are looking for