Print Server and Missing Driver

Hi. I run latest version of Tiger on a mini. I just bought a buffalo print server after hearing about how easy it is to set up. My Win machines are fine, but on the Mac, I can find the IP address, but when I go to pick the printer (a Cannon iP4000), the driver isn't listed. With some of the other Canon drivers, I can print to the printer - so clearly the pserver is found and works, but the layout and sizing is all wrong. I am mystified: Where exactly is the IP4000 driver residing on my hard drive? What is the file name? If I could even manually navigate to it, I'm pretty sure the thing would work, but I absolutely have been unable to figure out where the file is, or what it is named. Thanks to anyone who can help.

Printing with the built-in network protocols (Windows Printing, IP printing) requires a CUPS print driver. Canon doesn't provide CUPS drivers - their drivers are written to only use USB.
I think the newest version of Gimp-Print (included in OS X) and now called Gutenprint includes a driver for your Canon iP4000. Get the newest version "Gutenprint 5.0" here:
http://sourceforge.net/project/showfiles.php?group_id=1537
The only other CUPS driver for your Canon is from www.printfab.net.

Similar Messages

  • 2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

    For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
    A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
    Then, I went on with the reinstallation of HP software, for the print server and the printer.
    And it was a disaster.
    After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
    Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
    You can imagine my disappointment.
    Now, hopefully, I write in this forum to ask for help. My request is twofold:
    1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
    For this purpose, can you please give me your suggestions ?
    2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
    I’m asking because I found these pages which seems to give some hope, but I’m not so sure  ... :
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
    Many thanks in advance for your help
    Simone

    For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
    A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
    Then, I went on with the reinstallation of HP software, for the print server and the printer.
    And it was a disaster.
    After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
    Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
    You can imagine my disappointment.
    Now, hopefully, I write in this forum to ask for help. My request is twofold:
    1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
    For this purpose, can you please give me your suggestions ?
    2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
    I’m asking because I found these pages which seems to give some hope, but I’m not so sure  ... :
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
    Many thanks in advance for your help
    Simone

  • Jetlan Print Server and HP Deskjet

    Hi, I'm a mac newbie (XP convert..haha). I have a Cables To Go Jetlan 3200 print server and an HP Deskjet 5550 printer. I have tried a bunch of different things to try and get my macbook to print but to no avail. It prints from a Win XP desktop no problem.
    I can see the printer when I use the "add printer" utility and according to my Jetlan documentation, it uses appletalk. I have successfully added the printer. When choosing the printer, my HP isn't listed in the various printer types. I have tried using HPIJS and gimp-print beta 2.0 but neither seems to work. Print jobs seem to spool and go to the printer but all I get is numerous pages printing out with various characters. Have to stop the printer manually in order to abort the process.
    Any ideas would be greatly appreciated. So far, this is the only negative expeirience I've had with the mac. It rocks in every other way!!!
    Bert

    I don't have an intel mac, so I may not be able to help - hope someone else has tried this...
    (This may have something to do with running Printer Setup via Rosetta, or something like that.)
    I think the "Deskjet 900 Series Gimp-Print" driver should also work - is that the one you tried?
    Have you tried an IP printing protocol? I would try HP Jetdirect protocol first, because that one doesn't require you to search for a queue name.
    I think appletalk should work, but try an IP protocol for troubleshooting.
    The symptom of printing postscript gobbledygook is definitely a driver issue, so make sure when you select model (using hpijs) that it is the model "deskjet 5550 foomatic/hpijs."
    Good luck.

  • Wireless Printing with Netgear Print Server and HP Officejet 6110

    Setting up my wife's iMac for wireless printing (Mac is in Kitchen, printer in home office).
    We have a Netgear router and her internet connection (wireless) is fine.
    I configured the WGPS606 via a Vista laptop and have effectively printed through to the server wirelessly from the laptop.
    I downloaded and installed the drivers for the HP printer to the mac and have successfully printed when connected via USB (brought the printer to the kitchen to test)
    In adding the IP printer, I am able to set up an IP printer fine, but the HP driver does not appear in the dropdown menu.
    I have been able to get the iMac to ping the Print Server and choosing another HP driver does spool, but with gibberish of course.
    I believe the problem is that I can't figure out how to get the new driver to appear in the dropdown in the printer settings, which should solve the problem, I think.
    Advice?
    Thank you.
    Message was edited by: Tauria

    Unfortunately, there are two kinds of driver on OS X (not like Windows), Carbon and CUPS. To use the CUPS standard network protocols like IP printing, you have to use CUPS drivers. HP doesn't provide CUPS drivers (yet). Install the hpijs 3-part set:
    http://www.linux-foundation.org/en/OpenPrinting/macosx

  • How can I download the data to Application Server and Network Drive

    Hi Experts
    I am having problem with download the data to Application Server and Network Drive in back ground. its working in foregorund but not in back ground.please suggest me . Thanks for advance.
    Thanks & Regards
    Raghava

    Hi Experts
    I am using like this
    P_Back is a check box on the selection-screen.
    it_fihrst_out-its internal table
    sy-batch -Program is running in the background
    IF sy-batch IS INITIAL.
        IF p_back = 'X'.
          OPEN DATASET file_01 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc = 0.
            LOOP AT it_fihrst_out.
              TRANSFER it_fihrst_out TO file_01.
            ENDLOOP.
          ENDIF.
          CLOSE DATASET file_01.
          CASE sy-subrc.
            WHEN 0.
              WRITE: / file_01, / 'successfully generated.'.
            WHEN OTHERS.
              WRITE: / file_01, 'Unexpected error occurred.'.
          ENDCASE.
        ELSE.
          CALL FUNCTION 'WS_DOWNLOAD'
            EXPORTING
              filename                = file_01
              filetype                = 'ASC'
            TABLES
              data_tab                = it_fihrst_out
            EXCEPTIONS
              file_open_error         = 1
              file_write_error        = 2
              invalid_filesize        = 3
              invalid_type            = 4
              no_batch                = 5
              unknown_error           = 6
              invalid_table_width     = 7
              gui_refuse_filetransfer = 8
              customer_error          = 9
              OTHERS                  = 10.
          CASE sy-subrc.
            WHEN 0.
              WRITE: / file_01, / 'successfully generated.'.
            WHEN 2.
              WRITE: / file_01, 'Output Error: File still open'.
            WHEN OTHERS.
              WRITE: / file_01, 'Unexpected error occurred.'.
          ENDCASE.
        ENDIF.
      ELSE.
        LOOP AT it_fihrst_out.
          WRITE:/ it_fihrst_out.
        ENDLOOP.
      ENDIF.
    This is the code .

  • Linksys Wireless Print server and my Mac G4

    I just set up my linksys wireless print server and it's printing from my PC just fine - not so on my G4. My printer is a Canon Pixma ip5200, and the appropriate drivers etc are installed.
    I know the IP address and have tried setting up the printer via IPP (and pinged it from the mac successfully). Just no success printing. The printer utility looks like it is printing to the printer but nothing comes out.
    Any ideas?

    You won't be able to get this to work.
    The Canon printer drivers won't allow you to connect to and print to a Canon printer attached to a wireless print server.
    There is no solution, there is no way that this can work
    You have three solutions.
    Replace the Canon printer with another printer for which the drivers will work.
    Replace the Canon printer with a networked Canon printer such as the iP4000r (or any other network printer) in which case you won't need the print server
    Connect the Canon printer directly via USB to the computer to print.
    iFelix

  • Accessing files stored in Common Server and share drive with  SAP DMS

    Hi DMS Gurus,
    We have a requirement, apart from retreving the data from content server storage, the client also wants the documents stored in common file server and Share drive also to be accessed through DMS,
    1) one option for this may be upload all the documents in the existing servers to DMS Content servers to get the full funtionality of DMS i'm i right? please suggest.
    here again they have lacs of document so this may not be a ideal solution, now 2nd option is
    2) create a data carrier and Mount points with the existing server if i'm right, but by just doing this what funtionalities will this provide
    i have a preassumption that this existing common server can be used as a storage area for DMS (as vault or common server), but only those documents which are stored in to this common server or shared folder through DMS can be retrived by DMS., again i'm i right?
    but how can we access all the lacs of file which are already existing there for years.
    how can we see all the documents in SAP DMS which are stored earlier in this common server before DMS,
    is migrating all the necessary preexisting documents to SAP DMS the only Solution for this.
    any solution for this please suggest.
    Points sure for any clarification given
    Thanks and  Regards
    Priya S
    Edited by: Priya S on Feb 25, 2009 3:36 AM
    Edited by: Priya S on Feb 25, 2009 3:36 AM

    hi Priya
    This is an old thread but nevertheless would like to give some inputs.
    your point .. common file server and Share drive also to be accessed through DMS,
    1) one option for this may be upload all the documents in the existing servers to DMS Content servers to get the full funtionality of DMS.
    <The option 1 is an ideal option as in future u would one day need to migarate the documents if u intend to use SAP DMS as the DMS system in ur org>
    Alternatively if the documents would still need to be retained in the file server but also would need to associate to SAP business objects u could use the Define data carrier external DMS.
    This again depend on what kind of documents are stored in the file server & are they relevant to be associated to SAP objects/ Transactions.
    The point here is u still want to use SAP DMS to view the file , all though there are other option as Archive link, Service for objects etc. Using SAP DMS option will still call for creating DIR in SAP & assigning the file path hyper link using LSMW /upload prog.
    So as for a temp sol till u clean up the file server u can use the hyperlink and later migrate to Content server.
    Regards
    John

  • What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

    Hello!!
    What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
    I found two things as follows.
    1. MAC support
    2. USB dongle
    Is there anything else?

    Now I’m clear!!
    But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
    They say for each as follows.
    HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
    HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
    And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
    The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
    The wrong description is “NOTE:  You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
    You can erase this line!!

  • Creating Queue, Print Serve, and Printer

    We are using Novell Netware 4.x.
    We have a HPLJ5 SI printer with a CNET Print Server attached via the LP
    cable port then attached to the network.
    When creating the print queue, print server, and printer via the Netware
    Administrator it appears that nothing is seen on the locally attached
    print server.
    I have reviewed the config on the Print Server, all appears correct, but
    when I add the queue, server, and printer, the system does not see the
    prin server?
    I have been recently introduced to Novell, so please bear with me if the
    info to answer is not all here.
    TIA,
    Bill

    We are using IPX/netware.
    The print server is configured with:
    1. The print server name
    2. The Netware server name
    3. NDS Tree and Context
    I have also created the Queue, Print Server, and Printer in the
    organization. The print queue does have the print server and printer in
    the assignmenets area.
    I guess I am a little confused. If the print server is attached to the
    printer what is the relationship between the print server and the queue?
    And what makes this different between that and a print server and queue on
    the server itself?
    I guess you can tell I am a little (or maybe even a lot) lost!
    TIA,
    Bill

  • Notebook using Vista and wireless print server and HP5500 printer problem

    Installed std vista local driver for hp5550 printer with usb cable direct to printer.  Works ok
    Then, disconnected usb copper line to HP labtop and connected it into print server in router (D-link router to HP5500 printer).
    Installed wireless network driver in labtop (vista os)(no updated hp driver available for Vista on HP site).
    Print jobs just stack up in the que.
    Used 192.168.0.1 address (which works fine for my other old win 98 computer).
    Driver using the "raw" setting not "LPT"
    Print Sharing is enabled.
    Any suggestions?
    p.s.  The wirless system works fine on an old windows 98SE computer using the original 5550 installation disk. 

    Went back and installed the "Windows 2000 Print Server Software (from D-link Router 824vpn).  I assume that this included the USP Shareport program that was recommend in a thread.  I can now access router wirelessly.  However, wireless print jobs go into que for hp5550, que emptys, but printer does not start up.  Copper usb from printer to computer works fine (as separate printer)sta.  Using HPdeskjet 5550 (HPA ) printer, port 192.168.0.1, printer name/ip 192.168.0.1, protocal 9100, raw setting, port 9100, LPR and SNMP are both blank. Any suggestions (OS is Vista).  No drivers from Dlink or HP for this application.  Thanks

  • Wireless Print Server and Macintosh

    Hello:
    I am using a Linksys Wireless Print Server WPS54GU2. I have a HP LaserJet 1012 printer hooked up to it. i have a iMac and a Dell Windows PC. From the dell Windows PC, the wireless printing is working fine to the laserjet, however i just bought my mac and i am trying to setup the printing but it is not working.
    When i connect the printer directly to the mac through USB, it prints fine. However when I connect to through the print server wirelessly, i can see the printer through Applettalk and it does a test print (but it prints garbage). The problem that i see is that the drivers for HP LaserJet 1012 are not listed under the HP Model. So not sure what i need to do.
    Also, how do i print to a printer which is shared by a Windows machine?
    Has anyone got any direction?
    Thanks

    HP wrote the OS X driver so that it ONLY works with USB. To get network printing, install the hpijs and ESP ghostscript driver "set:"
    http://www.linuxprinting.org/macosx/hpijs/
    Add the printer via LPD or IPP (look through server manual), and be sure to enter the server's queue name, L1 or P1.
    Follow this guide to print via Windows:
    http://www.ifelix.co.uk/tech/3015.html

  • HP Q6236A Wireless Print Server and HP Officejet 5610

    Has anyone really successfully installed the HP Print Server successfully?  I have tried everything I can think of to get it to work and cannot.  I have Vista on my desktop where the officejet is installed and I have XP on my laptop.  I have a wireless network installed using a D-Link router that has been working for several years.  I downloaded the latest drivers for the Officejet and ensured that they were installed on both PCs.  I followed the onscreen instructions for installing the Print Server adapter and the PC adapter on both PCs (actually uninstalled and reinstalled several times.
    I got the PC adapter and the printer adapter to work one time on the desktop and then could not connect again.  I downloaded the updated file for the USB disconnect problem with Vista and still no luck.
    Does this HP Printer Adapter really work?  I have 3 friends that also would like to have this feature and all have HP computers and HP printers but we can't get support from HP.  What a shame!  Any suggestions??
    Thank you in advance.

    I’ve installed it successfully and worked fine so far. I share a printer with other computers.
    My wireless access point is Linksys router and configured with WPA2 PSK AES. And the printer is C4280.
    The installations were tough and easier. It depends on the client computer situation.
    Did you try followings?
    Step1. Configure the wireless setting for Q6236.
    1. Uninstall all of existed the printer driver and the related software, for make sure.
    You can do it that the printer installer run again. Then it should show uninstall option instead of the installation and chose it.
    2. Install Q6236 driver with the PC adapter.
    3. Do the advanced setup and setup wireless connection. Please refer the manual.
    4. Confirm network connection to the Q6236 by the utility.
    The utility icon where it is right bottom corner of the desktop gets green mark when the connection is successful.
     Step2. Install the printer device driver.
    1. Remove the PC adapter from the computer. It is not needed any more. It is only for wireless configuration for Q6236 once. After that, you can store it in the attic.  
    2. Disconnect the Q6236 network connection by the utility. This is important.
    3. Install the printer driver by the installer.
    In middle of the installation, the installer should request you the USB connection to the printer. Then connect the Q6236 network connection. Do not connect it before the request.
     For another PC to share the printer with the Q6236.
    Both of the PC and the printer should be online. And do not put the PC adapter on the PC.
    1. Uninstall all of existed the printer driver and the related software
    2. Install Q6236 driver.
    In the middle of the installation, Q6236 installer should find the printer itself and chose it.
    The PC and the Q6236 should be on same IP sub network.
    3. Confirm the network connection to the Q6236 by the utility.
    4. Do above Step2-2.
    If you do not get successful, please tell me which step was problem.

  • Airport Print Serving and Linux

    I have a small ethernet wired network with three macs and one PC running Ubuntu linux. The printer for the network is hanging off an Airport-Express in my network closet. All the macs print fine but I need to be able to print from the linux box as well. As such, I need to know what protocol that apple uses to support the print server function. Or, I need some advice on setting it up with an SMB protocol. Any information would be greatly appreciated.
    Matt

    Hi,
    Sorry for delaying in reply.
    Linux clients see page count. I've paused printing and checked some documents. Property page from a linux client document shows as this:
    Documents sent from windows clients show same but they've document name and page count.
    SPL archive copied from spooler printer on Windows server shows that info is present too:
    %!PS-Adobe-3.0
    %%Creator: cairo 1.9.5 (http://cairographics.org)
    %%CreationDate: Thu Jun 19 14:15:48 2014
    %%DocumentData: Clean7Bit
    %%LanguageLevel: 2
    %%DocumentMedia: Letter 612 792 0 () ()
    %%Orientation: Portrait
    %%For: (testuser)
    %%Title: (Phaser 5500 Descarga del archivo)
    %RBINumCopies: 1
    %%Pages: (atend)
    %%BoundingBox: (atend)
    %%EndComments
    %%BeginProlog
    %%BeginFeature: *JobPatchFile 1
    % Default Definitions
    userdict /xerox$pagedevice <<
    /MediaClass null
    /MediaPosition null
    /PageSize [612 792]
    /TraySwitch true
    /ManualFeed false
    /ImagingBBox null
    /ProcessColorModel /DeviceGray
    /DeviceRenderingInfo currentpagedevice 1 index get 1 dict copy
    /PostRenderingEnhance false
    /Install {
    xerox$old_install xerox$flip {
    currentpagedevice /PageSize get aload pop translate 180 rotate
    } if
    >> put
    <--- snip snip REMOVED FOR SIMPLICITY snip snip ------>
    showpage
    %%Trailer
    %%Pages: 1
    %%BoundingBox: 0 0 612 792
    %%EOF
    Linux client used official PPD file downloaded from xerox webpage for linux
    cups. Windows server uses Xerox Global Print Driver PS 5347.600.0.0 type 3 with
    Render print jobs on client computers as suggested by Alan before.
    Any other idea?

  • Mac Printing with a printer server and Windows XP desktop

    I have the following configuration:
    Dell Desktop running XP
    Apple iBook G4 running 10.4
    Linksys Router
    Linksys Print Server
    I can't get my iBook to print through the print server. I have tried IP Printing and provided the printer server IP Address and correct printer driver "HP LaserJet 1012 Foomatic/hpijs (which I think is now part of 10.4). When I try to print I get the following message, "Printer Busy; will retry in 10 sec. I have also had Connecting to 192.168.1.78 on port 630... and nothing happens.
    Any suggestions? I am at wits end because nothing is working. I know that my wireless router and print server are working because I ping'd them from the PC.
    Any help would be greatly appreciated.

    On windows, the setup software fills in required info like print server queue name - but we don't have that software on the Mac.
    Look in the print server manual and check the supported protocols - LPD and IPP require a queue name which you can find in the manual. HP Jetdirect protocol doesn't need a queue name, and is called TCP/IP raw or socket 9100 printing in some manuals.
    Good luck.

  • Netgear WGPS606 wireless print server and HP1006

    I have been trying to setup the Netgear WGPS606 wireless print server with my HP1006.  The setup runs fine, finds the printer etc but when it comes to try to print a test page it is "unable to create a print job".  When trying to print from Word etc I get similar message suggesting print test page/turn printer on/reinstall print drivers
    I have spent hours with Netgear support who eventually said it MIGHT not be compatible 
    Before I bin it does anyone have any suggestions?  I read somewhere it might be the USB drivers only work when connected directly to the PC (they're loaded up real time or something?) and to try using a serial driver instead?
    Might that work, and if so does anyone know where I might find a suitable driver?
    Thanks
    J

    I spent a month chasing my print server last year.   Save yourself a month.  The pad will find and print to airprint enabled printers. Period.  It will not find a network print server.
    Here is the list of printers, and some discussion.
    http://support.apple.com/kb/ht4356

Maybe you are looking for

  • Cannot get UI Command to work

    I am trying to run the only edit command (and an other UI Command) but when I type: http://www.myportal.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.uidetails/documents/public Documents/KM Documentation/.?uicommand=discussion ....I do not g

  • Extracting frames from video

    Hi Can anyone say me how to extract disismlar frames from a video Thanks in advance kokila

  • What is sap-dd and sap-uu

    hi all,                 pls tell me what is sap dd and sapuu and what is use of it. thanks.

  • How to set timer intervals for object + and a motion for entering stage

    Hi, I am making a simple game but I have a couple problems/queries. 1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the

  • Strange Open Firmware Message With RME Fireface on my Quad

    Hy, today I've discovered that when my fireface is plugged on my G5 Quad I get this message in open firmware boot. "Bad Bus Info CRC-16" If I boot the mac without the fireface plugged this message is not present. What does this open firmware message