Print Server for P1008

Hello,
Does any one know a print server that works with HP Laserjet P1008?
Thanks,
Praveen

This won't work with your LW 630, but HP came out with a wireless (& wire) network-ready Laser Jet #1320NW printer with duplexer & with 802.11b/g embedded print server. But not inexpensive - $450 after mail in rebate. Claimed to work with Windows from 98 to XP and Mac OS 9.x thru OS 10.x.
Cliff
iMac G5 20" 2.1GHz; PB G3 FW; LWIIg; HP LJ4mv Mac OS X (10.4.6)
iMac G5 20" 2.1GHz; PB G3 FW; Performa 5400; LWIIg; HP LJ4mv Mac OS X (10.4.5)
iMac G5 20" 2.1GHz; PB G3 FW; Performa 5400; LWIIg; HP LJ4mv Mac OS X (10.4.5)

Similar Messages

Printer server for two HP printer on VISTA PC

I have just purchased a Dell pc with the VISTA operation system.
I have two HP printers: HP Laser Jet 4100, Model CAAC049A, Serial # USJNG10352 and a HP business inkjet 2250, Model C2691A#ABA, Serical # SSG095110PR.
I want to set them up so all PC's in the house can access them. I had been using an old Linksys printserver that is no longer support and will not work with VISTA.
Is there any way that I can get these printers set up to work with VISTA and a print server? I know I can add a card to each that will let me use an HP jet direct card. I have also seen a parallel print server for sale on your web site.
What options do I have.

Hi,
Please use this:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=72892&pr...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?

Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?
I know that it works marvelous for printers connected via USB, but I'd like to know if you can use it as a more general print server.

No, you can't, but what do you expect to gain by doing so?
The main advantage of the print server is to provide multi-user network access to a printer that typically only supports a single connection. Since, by definition, your printer already has a network connection and can be used by multiple users.

Can anyone recommend a USB print server for both Mac & Windows?

After spending at least 20 hours trying to get my Macbook to print to a Windows XP shared printer, I am giving up and going the print server route. Unfortunately there seem to be a LOT of options and some are >$100. I want to be sure to find one that works for both Mac and Windows XP. Can anyone recommend a print server based on experience?
It can be hard-wired to the network (does not need to be wireless) and only needs one USB port. Also, it does not need to be "multi-function" compatible.
Thanks in advance!

Unfortunately, Apple just started using the CUPS printing system ~4 years ago. With CUPS drivers, you can print to all the standard comm protocols, the way drivers work in Windows. But except for Brother's, NO non-postscript printer driver on OS X was written to use CUPS. Instead they are using Carbon, the OLD OS 9 legacy programming interface. In that, they get to specify exactly which protocol is supported - and that's nearly always ONLY USB.
So, we have to rely on third party CUPS drivers. See if Gutenprint supports yours:
http://www.linux-foundation.org/en/OpenPrinting/macosx
or else, you may need to use printfab:
www.printfab.net
About print servers - they nearly all support "standard" protocols, which OS X (with CUPS drivers) can print to.

Solaris 10 as print server for remote Windows

Fellow SparcMeisters,
I'm having problem printing from Windoze XP/98/etc machines to an HPLJ 5000 attached to a SunBlade running Solaris 10. Before upgrading from Solaris 9 to 10 in December, printing was flawless. Now all that prints are line after line, page after page of raw PCL and PostScript:
^[%-12345@PJL JOB
@PJL SET RESOLUTION = 1200
@PJL SET ECONOMODE = OFF
@PJL ENTER LANGUAGE = POSTSCRIPT
%!PS-Adobe-3.0
et cetera
As background:
* Solaris 2.51, 2.7, and 9 worked flawlessly.
* Local printing and remote printing from another Sun or Macintosh OSX are flawless.
* I've tried various printer drivers on the Windoze machines: HP Postscript, HP PCL6, Generic PS, Generic PCL6.
* I've tried various definitions in the Solaris print manager: Generic PS, Generic PCL6, foomatic/PostScript, foomatic/hpljs
* I've tried various postscript settings on the windows side: with/without control-D before or after, ascii or binary
* I've sent the jobs by lp and by ipp.
* lpstat -a reports:
     HPLJPS accepting requests since December 20, 2007 ...
* svcs -a | grep print ... reports:
     online 14:10:07 svc:/application/print/cleanup:default
     online 14:10:47 svc:/application/print/server:default
     online 14:10:47 svc:/application/print/rfc1179:default
     online 14:10:51 svc:/application/print/ipp-listener:default
     online 14:10:58 svc:/application/cde-printinfo:default
Assistance in re-establishing such remote printing would be greatly appreciated. Please be kind about my running Windoze on some machines here. My work here requires it. :(

Thanks to Tim Croteau of Sun, a work around was found for this problem.
A printer definition should be made as:
lpadmin -p somename -v /dev/somedevice -T unknown -I any
For my use, the commands were:
lpadmin -p HPLJ5000 -v /dev/ecpp0 -T unknown -I any -o banner=never
accept HPLJ5000
enable HPLJ5000
That I can see, Solaris Print Manager does not provide a GUI-way to do this directly.
Using the Print Manager, defining the printer as it is, an HPLJ 5000, seems to cause the postScript input to be filtered. To prevent any filtering the Type must be "unknown" and the Content must be "any".
By the way, this printer definition can be in addition to a printer definition to the same printer for local use. For such local use, the Print Manager can define the printer as an HP LaserJet 5000 printing PostScript.

Using a Color Classic as a print server for modern Macs?

My fiancé and I have a 2011 MBP and a 2008 MBP respectively, both running Mountain Lion.
Our network is set up through a first-generation Time Capsule, which until recently, also had an Epson Stylus inkjet connected to it.
The Epson has passed away, and the only working printer we have is an old Apple Personal LaserWriter 320.
We still have several toner cartridges for the PLW, and it works just fine... but it only has tthe old 8-pin serial connector, and from what I understand, it's only compatible with LocalTalk.
The PLW is connected to a Mac Color Classic, which has been upgraded with an LC 575 logic board (including an ethernet communications card). It's currently running Mac OS 8.6. I'd like to set the Color Classic up as a print server until we can decide on a long-term solution, but I am unsure of how to get these systems to talk to each other over the network.
Can we get the Color Classic to host the PLW for our OSX machines?

m8,
Just like any hardwares,(vga, lan card, audio card etc) drivers for XP, Vista & Windows 2003 have specific drivers of its own. You'll need to find a driver for 3110(which include its modem) for windows 2003 server, but I doubt if you can find one. There is no work around on this!
Message Edited by android on 09-Aug-2008 01:39 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

SE/30 as print server for Tiger Network

Is it possible to use an SE/30 running 7.5.3 to act as a print server on a Tiger network?
SE/30 has an ethernet card installed. Network involves a Linksys WRT54G. AppleTalk is on, because I print to a LaserWriter 4/600.
The reason for asking, is that the Assante EtherTalk box is troublesome. (Altho' it's about 6 years old.) When there is a power interruption, it is very uncertain whether I can see the LaserWriter again.
By using the SE/30, I could connect the LW to it with the simple LocalTalk connection, and bypass the Assante stuntbox.
Help would be most welcome.

LocalTalk Bridge 2.1 Information
The Apple LocalTalk Bridge is an unsupported tool used to share LocalTalk-only devices, such as some LaserWriter printers, PowerBook notebook computers, or Newton MessagePad communications devices, on an Ethernet, Infrared, or Token Ring network. With the LocalTalk Bridge, you can access an Ethernet, Infrared, or Token Ring network while maintaining a seamless connection to your LocalTalk network. Again, this is an unsupported tool and has been provided solely as a convenience. Apple makes no warranty or representation, express or implied, with respect to this program, its quality, performance, or fitness for a particular purpose.
System requirements for the LocalTalk Bridge
System software version 7.1 or later.
Either classic AppleTalk networking software or Open Transport version 1.1 or later. For machines running Open Transport, version 1.1.2 or later is recommended.
Memory requirements:
• The LocalTalk Bridge driver requires approximately 70K of RAM to run.
• Open Transport requires a minimum of 5MB of RAM for computers with 68000-family microprocessors or 8MB of RAM for computers with PowerPC microprocessors. Open Transport memory requirements are based on total system memory including virtual memory, minus the size of any RAM disk and disk cache you choose.
Hardware Requirements:
• The LocalTalk Bridge requires at least a 68020 processor.
• Network interfaces to include one LocalTalk port and an alternate interface (Ethernet, Token Ring, or Infrared).
Available on the Older Software Downloads page:
http://www.info.apple.com/support/oldersoftwarelist.html#netcom
Look for this string to download:
Macintosh/Networking-Communications/OtherN-C/LocalTalk_Bridge2.1.smi.bin

Deskjet F 4480 and a print server for network printing

I have a HP Pavilion (win 7) and an Acer netbook ( Win XPsp3) wirelessly networked with the HP Paviion as the host for the Deskjet multifunction printer. I would like to set up a print server to alleviate some problems we are having with the Acer accessing the printer. Uaually all is ok, but It seems that whenever that netbook is put into sleep mode, I have to reboot it, shut down the printer (even to the point of disconnecting the USB and power cords, and then re hooking up all the cables) to get ithe netbook to print. so, I am looking at installing a print server to get around this annoyance.
I am using a DLink WB-1310 router, BTW.
Any suggestions on a capable print server? Not to mention any other suggestions, which i certainly would appreciate.
Thank you, all.

HP-provided drivers don't support network printing. You'll need to install Foomatic (a PPD interpreter), ESP ghostscript (postscript translator) and the 712c PPD from:
http://www.linuxprinting.org/macosx/foomatic/
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-DeskJet712C
Then, since we don't have the auto-setup software for OS X, you need to review the print server manual and find out which IP printing protocol to use. The easiest is HP Jetdirect (called TCP/IP raw port printing in many manuals) if it's available, because it doesn't require the device queue name.
Good luck.

Setting up a print server for 5 USB printers

I have seven Macs in the house all networked through hubs and a router.
Does anyone know how to set-up five USB ink-jet printer through a print server from Linksys. I current use all on one shared G5, so all can choose the printers.
My first attempt by getting the IP address of the print server was sucessful, but apparently I need port information. Also, the print server feeds into a USB hub, then to the printers. Is this possible?

In my limited search for a USB print server, I recall that you cannot connect them through a Hub. Look in the documentation to see if it can do this. I doubt it, though.

Looking for Print Server for HP Photosmart C4483 All-in-One Printer

I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

Hello Merole
As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
On the View tab, in the Color/Grayscale group, click Black and White.
On the Black and White tab, in the Change Selected Object group, click the settings that you want.
I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Wireless print server for HP LaserJet P2015dn

What hardware/software do I need to enable an HP Laserjet P2015dn to communicate with a NETGEAR WNDR3700 N600 Wireless Dual Band Gigabit Router?

jbarbercavu wrote:
What hardware/software do I need to enable an HP Laserjet P2015dn to communicate with a NETGEAR WNDR3700 N600 Wireless Dual Band Gigabit Router?

Airport Express questions on wireless print serving

I have a wireless network setup using a linksys router and thinking about using an Airport Express as a wireless print server in another room. I currently have a Canon MP500, 2 wired PCs connected to the router and 2 wireless laptops one Windows and an iBook. Would the Airport Express connect to my existing wireless network to act as a wireless print server for my network?
Thank you
PCs running Windows XP Pro and iBook is running OS X Tiger

Hi, does anyone know how to change the port setting on Windows XP Pro. I recently purchased an Airport extreme and the network is working great, however when I tried to set up the printer the documentation left some key peices of information out.
I had followed the step for installing a printer, but when I got to the point about specifing the adapter type, the documentation in the manual that came with the Airport skipped over that part. I guessed at the adapter and unfortunatly (and obviously after reading the instructions here http://www.ifelix.co.uk/tech/1008.html) I chose the wrong adapter. Now I want to go back and fix it but I can't figure out how. When I tried to run the add printer wizard again and the port setting wizard it said the port (IP_10.0.1.1) was alread in use and kicked me out of the wizard.
How do I change the settings on the port to the correct settings?
Thanks
Dell laptop Windows XP Pro

HP PSC 1315, Brother HL-2040 & D-Link DPG321 wireless print server

Hi all...I've had the D-Link wireless print server for awhile, and originally had an ancient Samsung attached to it.
Now though, the old Samsung printer is gone and I'm using the print server in my office with my new Brother HL-2040, which connected to my Mac effortlessly...super easy.
The problem comes in hooking up my HP PSC 1315 AIO to the wireless print server's second port. I've read a ton of postings in the last couple of days indicating the HP driver won't support this, so I downloaded the hpijs driver.
The Brother printer is hooked up to queue 1 (ps-5c714d-u1) per our documentation, and I'm trying to get the HP hooked up to queue 2 (ps-5c714d-u2), but absolutely nothing will print to it. One note - I'm not getting any error messages. When I pull up the printer to view the jobs, it looks like it's completed printing, so I'm not sure if it's stuck somewhere in the print server or what.
The HP works fine when connected directly via USB to my MacBook Pro - so the issue isn't with the printer itself or the cabling.
We CAN however, manage to print to the HP from our Windows XP desktop in the other room, interestingly enough.
MacBook Pro Mac OS X (10.4.9)

No, I didn't. Originally when I was doing all my research, I thought I only had to download that if I had Mac OS 10.2 or below...in retrospect now I'm not sure why I thought that.
I've now downloaded the file though, and have no idea what to do with it. In reading all of the installation info, I'm thinking it might just be easier to walk over to the printer and plug it into the USB port of my MacBook when I need to use it!
Thanks for the suggestion...not sure I have the constitution to keep fighting the good fight on this.

Job prints but is then stuck in queue - LaserJet P1102 with JetDirect 175x print server

Hello,
I have an unusual error happening when i try to install my P1102 through a print server. Everything installs ok and allows me to print a test page, the next document i try to print prints ok but the job remains in the queue and stays there. After a couple of minutes saying Printing it then says Error, and any other attempts at printing get stuck behind this job. Then, if i dont delete the job in error from the queue it will print this document every 10 mins until deleted or i switch the printer off!
The set up is a LaserJet P1102 attached to a JetDirect 175x print server, PC running Win7 x86
Things i have tried:
- Install on another pc. Tried both Win 7 x86 and x64
- Changed print server for known working one
- Connected via USB, printer works fine
Any suggestions? Thanks in advance

Hi CompassCC,
The jetdirect 175 is a commercial line product. Check out the support documentation from the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
You may want to repost your questions on the commercial support forum at the links below.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Need networked printer driver for HP LJ 1022N for Windows 8.1 x64

We've had this printer setup on our Windows 2003 print server for years & now that I'm transitioning to a Windows 2012 print server & Win 8.1 clients, the only driver I'm finding is a host-based driver for usb. Is there another driver I can use on the print server for this printer? It wasn't listed in the UPD supported list nor is it in the HP list in the Add driver dialog after updating from Windows Updates. I appreciate any help you can provide!

Hello Glorfindel,
Welcome to the HP Forums.
I understand your concerns with the Laserjet 1022N. If you're looking for a Windows 2012 print server, then there is no full feature software. Now, for your Windows 8.1, there is a full feature software on the HP website here.
If you need help install this software over a network connection, then please follow this HP document on Installing the Printer Software in Windows 8.1 for a USB or Network Connection.
Please let me know if you have any further questions.
I worked on behalf of HP.

Print Server for P1008

Similar Messages

Maybe you are looking for