Print set up icon in PSE4

How do i get this icon on the tool bar at the top? In PSE1, it was next to the print icon. Now i have to click on print and bring all the boxes up till i get to the print set up box.

You don't mean icon, you mean toolbar button.
Unfortunately, the toolbar in PSE 4 Editor is not customizable.
Do you mean Page Setup or printer Properties?
If the former, you can do File/Page Setup [or SHIFT/CTRL/P].

Similar Messages

HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
Thanks,
Ivette

You would need to get the IP address of your printer then manually add a network print queue.
To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

Page and Print Set-Up in P6.2

Can you save your page set-up (page size etc.) and print set-up (printer, including Adobe) with your layout save?

michigan mike wrote:
Can you save your page set-up (page size etc.) with your layout save?YES
.. and print set-up (printer, including Adobe) with your layout save?NO. not with the layout, but print driver default settings. more to do with the client machine OS.
try 1st and 2nd buttons in the "print preview" icon bar.
best of luck

Won't print set on idle

When I try to print something. It shows up as a print job, but the printer is set on idle and does not print.

Hi , Welcome to the HP Forums! I noticed that your printer will not print set on idle. I am happy to look into this for you! For further assistance, I will need some more information: The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.If the printer is connected, Wireless, Ethernet, or USB.If the printer is able to make copies.If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. In the meantime, if you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

How do I change the printer setting to print in Black only?

How can I change my printer setting to print in Black only

It depends on your printer as well; my Epson AIO only does color (even when it is black font only) - or grayscale )sort of a "draft" quality) as it uses some color even for black:

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

How to set the icon for the entire application with JFrame.setIconImage

I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
How can I set the icon for the entire application?
How can I set the icon for JDialogs?
Thank you

In order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
cheers,
Greg

Incompitible Print Setting Error for HP LJ 8500n in Windows Vista

Hi, I have two laptops, one with Windows XP and another with Windows Vista Business. There is a HP LJ 8500n connected with router and accessed by both laptops. Somehow, when I print from Windows XP laptop and I change the print settings there is no error message. But, when I print from Vista Business Laptop, it prints without any error message for default setting, but when I try to change the print setting (to change the paper size or color) the error message comes with "Incompitible Print Settings. It says: "There are one or more conflicting settings. One of the conflicting settings is: Accessory Output Bin: Not Installed. Output Bin: Mailbox 5." Once I click "Ok" it will have same message with output bin changed to Mailbox 6, etc. After I go through approximately 8 to 10 output bins messages, it gives me the screen where I can change the print settings. After that, I can print with revised setting. But, it is very annoying to go through these messages every time I have change the print settings.
Please reply, Thank You,

@fshrago
For the laserjet 3390, you have the option of using the either the Universal Print Driver (network connection) or Windows Update Driver (USB connection) in windows 8.1. Neither of these drivers come with a fax or scan driver.
To use the fax and scan driver, you will need to use the Windwos Fax and Scan Software however you will need to be usb connected. I have given you links to documents that explain how to use both the Windwos Update driver and the Windows Fax and Scan Software.
Driver support included in Windows 8 / Windows 8.1 or in Windows Update - usb connection only
Use the software in Windows 8 to scan - usb connection only
Please understand that the UPD is a print only driver. If you would like a fax/scan driver you will need to connect via USB and use the Windows Fax and Scan driver along with the Windows Update/In-OS driver.
Good Luck.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.

How to set an icon of a Button in ActionScript ?

A need to create at runtime some buttons and set their icons.
I found a problem to do that in ActionScript. In MXML is easy
to set the icon just use a syntax like this: <mx:Button
label="some text" icon="images/ok.png"/>
But in ActionScript how I can set the icon ?
I need to create the icon by a path passed as a parameter.
Example:
The user want to create a button with a label and an icon so
call a method like this (that return and instance of Button):
createButton("Update","images/update.png");
Thank at all for the help.
Marco

supahsain08 wrote:
Well i did this
Triangle.setLocation(50, 100);
(where Triangle is a buton)
it doesn't do anything, stays at the same placeIt's all about context here and there are still many unknowns here that can effect your result and that you have not told us or shown us. My suggestion to you is to consider posting an SSCCE (Short, Self Contained, Correct (Compilable), Example, a condensed program similar to your current program in that it demonstrates the problem at hand, but is the smallest bit of code that still compiles and has no extra code that's not relevant to your problem. For more info on SSCCEs please look here:
[http://homepage1.nifty.com/algafield/sscce.html|http://homepage1.nifty.com/algafield/sscce.html]
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you can will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}good luck, pete

Printer setting could not be saved operation could not be completed error

printer setting could not be saved operation could not be completed error 0*000006cc

Hello printer setting could not be saved,
When you do receive this error message?
Have you made any changes before this issue?
Please take the following steps for troubleshooting:
1. Update the printer driver from the manufacturer website.
2. Run the printer troubleshooter.
http://windows.microsoft.com/en-us/windows7/open-the-printer-troubleshooter
3. Temporarily block the firewall and check if this issue still exist.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Can't set a icon for a shortcut of a visual studio installer project

hi.
I created a visual studio project (VS 2013, windows 8) from a exist project in the selution, but i can't set the icon on the desktop and program menu.
i tried all the selution i found in the web:
changed the extention to .exe
the size of the icon is 13 k"b, but i still dont see the icon.
i also tried making a shurtcut from Primary Output, with no change.
It should be noted, that in the properties of the shortcot, it shows that there is a icon, and aslo the shortcut works, and ythe icon is showed in the install program, bot the icon is not showed on the desktop and the program menu.

hi.
I created a visual studio project (VS 2013, windows 8) from a exist project in the selution, but i can't set the icon on the desktop and program menu.
i tried all the selution i found in the web:
changed the extention to .exe
the size of the icon is 13 k"b, but i still dont see the icon.
i also tried making a shurtcut from Primary Output, with no change.
It should be noted, that in the properties of the shortcot, it shows that there is a icon, and aslo the shortcut works, and ythe icon is showed in the install program, bot the icon is not showed on the desktop and the program menu.
Hello,
It seems that you want to add an icon for your application to be used as a shortcut or an icon located in quick start explorer.
You could add that icon with the following way.
How to: Specify an Application Icon (Visual Basic, C#)
In addition, we should pay attention to the icon format for different systems and different DPI modes.
You could refer to the following thread.
Which icon sizes should my Windows application's icon include?
The following format works for both windows 8 and windows 7.
Windows 7:
Explorer views:
Details / List / Small symbols: 16
All other options: 256 (resized, if necessary)
Right-click->Properties / choosing a new icon: 32
Pinned to taskbar: 32
Right-click-menu: 16
Desktop:
Small symbols: 32
Medium symbols: 48
Large symbols: 256 (resized, if necessary)
Zooming using Ctrl+Mouse wheel: 16, 32, 48, 256
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I would like to print out the icon and title of each of my apps to another document for printing and sharing within my family

I would like to print out the icon and title of each of my IOS apps to another document for printing and sharing within my family. My son has my old iPod touch so I erased it so he could put whatever games he wants to play on that I used to play with. It is difficult to download every game at one time because there is too much to download at one time. I have many hundreds of apps. One way I found was to create a screen grab of each page in iTunes then open it in Preview contact sheet but that is really tiny unreadable image of each screen. I also tried importing a screen shot of the contact sheet into Paint 2 and magnifying it on several pages but that is really blurry. The ideal solution would be to import the icon and text to another app or to provide a print list of apps solution within iTunes.

Create iPad screen shots by briefly pressing the home and on/off buttons together. You will hear a shutter click sound and find a screen shot on your iPad's Camera Roll. You can then print these screen shots as you would any iPad photos.
UPDATE: I assumed you had an iPad. Hopefully your iOS device does have an on/off and home button and is capable of producing screen shots.

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/

What is your screen resolution?
What operating system?

Print set up icon in PSE4

Similar Messages

Maybe you are looking for