Print settings gone wrong

I have a Canon MP150 Pixma printer. Something has recently gone wrong and I hope someone here can help me.
My printer has stopped printing properly from iPhoto (iPhoto 4.0.3). It will print normally from my web browser (Firefox) and from Word and some other applications but not from iPhoto or from the photoshop type software that came with the printer (PhotoStudio by ArcSoft). In those programs it prints as if in some type of draft mode. It prints quickly and the colours are very faded.
I have uninstalled and reinstalled the printer driver, I have trashed the iPhoto and PhotoStudio plists, I have run the Printer setup utility, I have checked the print settings when running a print from iPhoto. I am fed up. Can anyone advise what else I could do to fix the problem? I would be so grateful. Thank you.
Emac   Mac OS X (10.3.9)   512RAM

Yes to both questions, Philly.
The printer is identified. I looked at all the settings in the Advanced options menu - but I wasn't sure what to change. So I clicked the standard presets button - was that right? It used to print OK and don't recall messing around with these settings in the past other than to change to grayscale printing once when printing from Word.
Thanks for your interest.

Similar Messages

  • I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

    I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

    Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
    Try the following: make temporary copy of the library and do the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • HELP!!! My settings are wrong need to send for printing

    Hi
    I am doing brochure's for my company. I am from South Africa.
    I use Illustrator for the brochure, Layout and Text.
    Last month the printer had problems with printing the brochure. I discovered my settings are wrong.
    This was the settings:
    Colour Setting
    Settings:     Custom
    WorkingSpace
    RGB:               sRGB IEC61966-2. 1
    CMYK:            U.S. Web Coated (SWOP) v2
    Color Management Policies:
    RGB:               Off
    CMYK:             Preserve Numbers (Ignore Linked Profiles)
    Profile Mismatches:  Ask When Opening (ticked)
                                   Ask When Pasting ( Not Ticked)
    Missing profiles:       Ask When Opening (Ticked)
    Then I did research On Adobe Community Help and changed it to the below but its wrong too
    Colour Setting
    Settings:     Europe Prepress 3
    WorkingSpace
    RGB:               Adobe RGB (1998)
    CMYK:            Coated FOGRA39 (ISO 12647-2:2004)
    Color Management Policies:
    RGB:               Preserve Embedded Profiles
    CMYK:             Preserve Numbers (Ignore Linked Profiles)
    Profile Mismatches:  Ask When Opening (ticked)
                                   Ask When Pasting (Ticked)
    Missing profiles:       Ask When Opening (Ticked)
    Can someone help me to set it right according to RSA printers settings, something like a default setting.
    Last Month the printer said the below:
    - fonts are not embedded.
    - black is not on overprint and is 4 colour black
    I never had this problem before, so I have no idea what went wrong all of a sudden.
    Now when I open my prevoius work on Illustrator or Photoshop, a small window pops up saying work is not according to this settings, etc.
    Please help. Im desperate.
    I need to start my new brochure tomorrow
    Thank you in advance
    Kajal

    You should get a preflight checklist from your print vendor.  Here's what I have set in Illustrator...
    You should also send the print vendor a press-ready PDF.  Not all of the file problems are limted to color settings.  For instance...
    "Last Month the printer said the below:
    - fonts are not embedded. "
    When you Save As > EPS, select "Include Fonts" in the selection process; and when Save As > Press Quality PDF, select "Embed Fonts" in the Settings dialogs.
    "- black is not on overprint and is 4 colour black"
    In Preferences > Appearance of Black, select "Accurate Black" in both screen and print; in your file, set appropriate Black elements to Overprint in the Color "Attributes" dialog.
    Whenever you are not sure what the printer is talking about, ask them to explain what they mean and help you fix the problems.  If they refuse, ask them where you can get help.  Most good shops will be willing to help you.

  • Reset printer settings....still no print....plus added items to menu bar...they're gone

    reset printer settings....still no print....plus added items to menu bar...they're gone from bar & customize window...title bar changed

    Firefox doesn't print some pages well, but if you have this problem on all pages, there may be some problem with Firefox's ability to work with your printer driver. If it's only particular pages, can you post the URLs for an assessment?
    I'm not clear on what happened with Cut, Copy & Paste: you moved them from the menu drop-down to the toolbar and then they disappeared?
    If you return to Customize mode, try clicking Restore Defaults and see whether things return to normal.
    When you say "toolbar background" do you mean a theme you were using in an earlier version of Firefox? Otherwise, there's not much to see.
    If Firefox is becoming transparent or showing some desktop or showing other display glitches it may be incompatible with your graphics card drivers. The standard workaround for that is to disable Firefox's use of hardware acceleration for graphics.
    3-bar menu button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    This will take effect the next time you exit out of Firefox and restart it.

  • My ipad has died! I was deletng some emails when the email, safari, settings all went dead. Now i can't turn it on. it is charged but i have plugged it in and again have no symbol to say it's charging. What has gone wrong?

    my ipad has died! I was deleting some emails when the email, safari, settings all went dead. Now i can't turn it on. it is charged but i have plugged it in and again have no symbol to say it's charging. What has gone wrong?

    that worked - thank you! Do you know why it happened? did i do something wrong? i was just deleting some emails with attached photos.

  • My macbook pro has stopped detecting my wi fi printer. What has gone wrong?

    my macbook pro has stopped detecting my wi fi printer. What has gone wrong? 

    Bad RAM. Reseat it and see if that clears it up. If not then that need to be replace or the actual RAM sockets have gone bad.

  • I have a MacBook Air and for what ever reason, the print settings have gone out of whack. I am not sure how to set to print a normal A4 paper size or a standard envelope. These settings were working O.K., but not now

    I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • Gnome won't start: Oh no! Something has gone wrong.

    Hello,
    after a week holyday i installed all new updates on my Notebook (Asus UX31). During shutdown it freezed and i had to switch off the Notebook. Now if i start i can login with Slim and than gnome starts with an error display: "Oh no! Something has gone wrong. A problem has occured and the system can't recover. All extensions have been disabled as precaution." I can klick on a Log Out Button but if i log in again, the same is happening. It's funny that there appear reminders from evolution and the dialog to unlock the keyring.
    Any suggestions?
    Here are some logs:
    /var/log/Xorg.0.log
    [ 16.074]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 16.074] X Protocol Version 11, Revision 0
    [ 16.074] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 16.074] Current Operating System: Linux oliver-zen 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 16.074] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cd85b266-a33f-4abf-93d6-7ac918f8ff26 ro quiet add_efi_memmap i915.i915_enable_rc6=1 drm.vblankoffdelay=1 i915.semaphores=1
    [ 16.074] Build Date: 01 July 2013 10:48:42AM
    [ 16.074]
    [ 16.074] Current version of pixman: 0.30.0
    [ 16.074] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 16.074] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 16.074] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 3 19:37:30 2013
    [ 16.075] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 16.075] (==) No Layout section. Using the first Screen section.
    [ 16.075] (==) No screen section available. Using defaults.
    [ 16.075] (**) |-->Screen "Default Screen Section" (0)
    [ 16.075] (**) | |-->Monitor "<default monitor>"
    [ 16.076] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 16.076] (**) | |-->Device "Card0"
    [ 16.076] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 16.076] (==) Automatically adding devices
    [ 16.076] (==) Automatically enabling devices
    [ 16.076] (==) Automatically adding GPU devices
    [ 16.076] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 16.076] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 16.076] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 16.076] (II) Loader magic: 0x7fdc20
    [ 16.076] (II) Module ABI versions:
    [ 16.076] X.Org ANSI C Emulation: 0.4
    [ 16.076] X.Org Video Driver: 14.1
    [ 16.076] X.Org XInput driver : 19.1
    [ 16.076] X.Org Server Extension : 7.0
    [ 16.077] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 16.079] (--) PCI:*(0:0:2:0) 8086:0116:1043:1427 rev 9, Mem @ 0xddc00000/4194304, 0xc0000000/268435456, I/O @ 0x0000e000/64
    [ 16.079] Initializing built-in extension Generic Event Extension
    [ 16.079] Initializing built-in extension SHAPE
    [ 16.079] Initializing built-in extension MIT-SHM
    [ 16.079] Initializing built-in extension XInputExtension
    [ 16.079] Initializing built-in extension XTEST
    [ 16.079] Initializing built-in extension BIG-REQUESTS
    [ 16.079] Initializing built-in extension SYNC
    [ 16.079] Initializing built-in extension XKEYBOARD
    [ 16.079] Initializing built-in extension XC-MISC
    [ 16.079] Initializing built-in extension SECURITY
    [ 16.079] Initializing built-in extension XINERAMA
    [ 16.079] Initializing built-in extension XFIXES
    [ 16.079] Initializing built-in extension RENDER
    [ 16.079] Initializing built-in extension RANDR
    [ 16.079] Initializing built-in extension COMPOSITE
    [ 16.079] Initializing built-in extension DAMAGE
    [ 16.079] Initializing built-in extension MIT-SCREEN-SAVER
    [ 16.079] Initializing built-in extension DOUBLE-BUFFER
    [ 16.079] Initializing built-in extension RECORD
    [ 16.079] Initializing built-in extension DPMS
    [ 16.079] Initializing built-in extension X-Resource
    [ 16.079] Initializing built-in extension XVideo
    [ 16.079] Initializing built-in extension XVideo-MotionCompensation
    [ 16.079] Initializing built-in extension XFree86-VidModeExtension
    [ 16.079] Initializing built-in extension XFree86-DGA
    [ 16.080] Initializing built-in extension XFree86-DRI
    [ 16.080] Initializing built-in extension DRI2
    [ 16.080] (II) LoadModule: "glx"
    [ 16.080] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 16.080] (II) Module glx: vendor="X.Org Foundation"
    [ 16.081] compiled for 1.14.2, module version = 1.0.0
    [ 16.081] ABI class: X.Org Server Extension, version 7.0
    [ 16.081] (==) AIGLX enabled
    [ 16.081] Loading extension GLX
    [ 16.081] (II) LoadModule: "intel"
    [ 16.081] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 16.081] (II) Module intel: vendor="X.Org Foundation"
    [ 16.081] compiled for 1.14.2, module version = 2.21.13
    [ 16.081] Module class: X.Org Video Driver
    [ 16.081] ABI class: X.Org Video Driver, version 14.1
    [ 16.082] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 16.084] (++) using VT number 7
    [ 16.096] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 16.096] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 16.096] (==) intel(0): RGB weight 888
    [ 16.096] (==) intel(0): Default visual is TrueColor
    [ 16.096] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
    [ 16.096] (**) intel(0): Relaxed fencing enabled
    [ 16.096] (**) intel(0): Wait on SwapBuffers? enabled
    [ 16.096] (**) intel(0): Triple buffering? enabled
    [ 16.096] (**) intel(0): Framebuffer tiled
    [ 16.096] (**) intel(0): Pixmaps tiled
    [ 16.096] (**) intel(0): 3D buffers tiled
    [ 16.096] (**) intel(0): SwapBuffers wait enabled
    [ 16.096] (==) intel(0): video overlay key set to 0x101fe
    [ 16.096] (II) intel(0): Output eDP1 has no monitor section
    [ 16.097] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 16.098] (II) intel(0): Output VGA1 has no monitor section
    [ 16.098] (II) intel(0): Output HDMI1 has no monitor section
    [ 16.099] (II) intel(0): Output DP1 has no monitor section
    [ 16.099] (II) intel(0): EDID for output eDP1
    [ 16.099] (II) intel(0): Manufacturer: COR Model: 17db Serial#: 0
    [ 16.099] (II) intel(0): Year: 2011 Week: 20
    [ 16.099] (II) intel(0): EDID Version: 1.4
    [ 16.099] (II) intel(0): Digital Display Input
    [ 16.099] (II) intel(0): 6 bits per channel
    [ 16.099] (II) intel(0): Digital interface is DisplayPort
    [ 16.099] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 16.099] (II) intel(0): Gamma: 2.20
    [ 16.099] (II) intel(0): No DPMS capabilities specified
    [ 16.099] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 16.099] (II) intel(0): First detailed timing is preferred mode
    [ 16.099] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 16.099] (II) intel(0): redX: 0.574 redY: 0.341 greenX: 0.352 greenY: 0.564
    [ 16.099] (II) intel(0): blueX: 0.162 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
    [ 16.099] (II) intel(0): Manufacturer's mask: 0
    [ 16.099] (II) intel(0): Supported detailed timing:
    [ 16.099] (II) intel(0): clock: 97.8 MHz Image Size: 293 x 164 mm
    [ 16.099] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 16.099] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 16.099] (II) intel(0): Supported detailed timing:
    [ 16.099] (II) intel(0): clock: 97.8 MHz Image Size: 293 x 164 mm
    [ 16.099] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 16.099] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 16.099] (II) intel(0): CPT
    [ 16.099] (II) intel(0): Unknown vendor-specific block 0
    [ 16.099] (II) intel(0): EDID (in hex):
    [ 16.099] (II) intel(0): 00ffffffffffff000df2db1700000000
    [ 16.099] (II) intel(0): 14150104951d10780a129593575a9029
    [ 16.099] (II) intel(0): 1e505400000001010101010101010101
    [ 16.099] (II) intel(0): 010101010101322640a060841a303020
    [ 16.099] (II) intel(0): 350025a410000018322640a060841a30
    [ 16.099] (II) intel(0): 3020350025a410000018000000fe0043
    [ 16.099] (II) intel(0): 50542020202020202020202000000000
    [ 16.099] (II) intel(0): 004e4c41413133335541303241200044
    [ 16.100] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 16.100] (II) intel(0): Printing probed modes for output eDP1
    [ 16.100] (II) intel(0): Modeline "1600x900"x60.0 97.78 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.6 kHz eP)
    [ 16.100] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 16.100] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 16.100] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 16.100] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 16.101] (II) intel(0): EDID for output VGA1
    [ 16.102] (II) intel(0): EDID for output HDMI1
    [ 16.102] (II) intel(0): EDID for output DP1
    [ 16.102] (II) intel(0): Output eDP1 connected
    [ 16.102] (II) intel(0): Output VGA1 disconnected
    [ 16.102] (II) intel(0): Output HDMI1 disconnected
    [ 16.102] (II) intel(0): Output DP1 disconnected
    [ 16.102] (II) intel(0): Using exact sizes for initial modes
    [ 16.102] (II) intel(0): Output eDP1 using initial mode 1600x900
    [ 16.102] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 16.102] (II) intel(0): Kernel page flipping support detected, enabling
    [ 16.102] (==) intel(0): DPI set to (96, 96)
    [ 16.102] (II) Loading sub module "fb"
    [ 16.102] (II) LoadModule: "fb"
    [ 16.102] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.103] (II) Module fb: vendor="X.Org Foundation"
    [ 16.103] compiled for 1.14.2, module version = 1.0.0
    [ 16.103] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.103] (II) Loading sub module "dri2"
    [ 16.103] (II) LoadModule: "dri2"
    [ 16.103] (II) Module "dri2" already built-in
    [ 16.103] (==) Depth 24 pixmap format is 32 bpp
    [ 16.103] (II) intel(0): [DRI2] Setup complete
    [ 16.103] (II) intel(0): [DRI2] DRI driver: i965
    [ 16.103] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
    [ 16.105] (II) UXA(0): Driver registered support for the following operations:
    [ 16.105] (II) solid
    [ 16.105] (II) copy
    [ 16.105] (II) composite (RENDER acceleration)
    [ 16.105] (II) put_image
    [ 16.105] (II) get_image
    [ 16.105] (==) intel(0): Backing store disabled
    [ 16.105] (==) intel(0): Silken mouse enabled
    [ 16.105] (II) intel(0): Initializing HW Cursor
    [ 16.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 16.107] (==) intel(0): DPMS enabled
    [ 16.107] (==) intel(0): Intel XvMC decoder enabled
    [ 16.107] (II) intel(0): Set up textured video
    [ 16.108] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 16.108] (II) intel(0): direct rendering: DRI2 Enabled
    [ 16.108] (==) intel(0): hotplug detection: "enabled"
    [ 16.130] (--) RandR disabled
    [ 16.144] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/i965_dri.so failed (/usr/lib/xorg/modules/dri/i965_dri.so: invalid ELF header)
    [ 16.144] (EE) AIGLX: reverting to software rendering
    [ 16.144] (II) AIGLX: Screen 0 is not DRI capable
    [ 16.174] (II) AIGLX: Loaded and initialized swrast
    [ 16.174] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 16.175] (II) intel(0): Setting screen physical size to 423 x 238
    [ 16.402] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 16.402] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 16.402] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 16.402] (**) Video Bus: Applying InputClass "keyboard"
    [ 16.402] (II) LoadModule: "evdev"
    [ 16.403] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.403] (II) Module evdev: vendor="X.Org Foundation"
    [ 16.403] compiled for 1.14.2, module version = 2.8.1
    [ 16.403] Module class: X.Org XInput Driver
    [ 16.403] ABI class: X.Org XInput driver, version 19.1
    [ 16.403] (II) Using input driver 'evdev' for 'Video Bus'
    [ 16.403] (**) Video Bus: always reports core events
    [ 16.403] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 16.403] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 16.403] (--) evdev: Video Bus: Found keys
    [ 16.403] (II) evdev: Video Bus: Configuring as keyboard
    [ 16.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
    [ 16.403] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 16.403] (**) Option "xkb_rules" "evdev"
    [ 16.404] (**) Option "xkb_model" "pc104"
    [ 16.404] (**) Option "xkb_layout" "de"
    [ 16.464] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 16.464] (**) Power Button: Applying InputClass "system-keyboard"
    [ 16.464] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.464] (**) Power Button: Applying InputClass "keyboard"
    [ 16.464] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.464] (**) Power Button: always reports core events
    [ 16.464] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 16.464] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.464] (--) evdev: Power Button: Found keys
    [ 16.464] (II) evdev: Power Button: Configuring as keyboard
    [ 16.464] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 16.464] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 16.464] (**) Option "xkb_rules" "evdev"
    [ 16.464] (**) Option "xkb_model" "pc104"
    [ 16.464] (**) Option "xkb_layout" "de"
    [ 16.466] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 16.466] (II) No input driver specified, ignoring this device.
    [ 16.466] (II) This device may have been added with another device file.
    [ 16.466] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 16.466] (**) Sleep Button: Applying InputClass "system-keyboard"
    [ 16.466] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 16.466] (**) Sleep Button: Applying InputClass "keyboard"
    [ 16.466] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 16.466] (**) Sleep Button: always reports core events
    [ 16.466] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 16.466] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 16.466] (--) evdev: Sleep Button: Found keys
    [ 16.466] (II) evdev: Sleep Button: Configuring as keyboard
    [ 16.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 16.467] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 16.467] (**) Option "xkb_rules" "evdev"
    [ 16.467] (**) Option "xkb_model" "pc104"
    [ 16.467] (**) Option "xkb_layout" "de"
    [ 16.467] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 16.468] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
    [ 16.468] (II) No input driver specified, ignoring this device.
    [ 16.468] (II) This device may have been added with another device file.
    [ 16.469] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
    [ 16.469] (II) No input driver specified, ignoring this device.
    [ 16.469] (II) This device may have been added with another device file.
    [ 16.469] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
    [ 16.469] (II) No input driver specified, ignoring this device.
    [ 16.469] (II) This device may have been added with another device file.
    [ 16.470] (II) config/udev: Adding input device USB2.0 VGA Webcam (/dev/input/event9)
    [ 16.470] (**) USB2.0 VGA Webcam: Applying InputClass "system-keyboard"
    [ 16.470] (**) USB2.0 VGA Webcam: Applying InputClass "evdev keyboard catchall"
    [ 16.470] (**) USB2.0 VGA Webcam: Applying InputClass "keyboard"
    [ 16.470] (II) Using input driver 'evdev' for 'USB2.0 VGA Webcam'
    [ 16.470] (**) USB2.0 VGA Webcam: always reports core events
    [ 16.470] (**) evdev: USB2.0 VGA Webcam: Device: "/dev/input/event9"
    [ 16.470] (--) evdev: USB2.0 VGA Webcam: Vendor 0x13d3 Product 0x5719
    [ 16.470] (--) evdev: USB2.0 VGA Webcam: Found keys
    [ 16.470] (II) evdev: USB2.0 VGA Webcam: Configuring as keyboard
    [ 16.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9/event9"
    [ 16.470] (II) XINPUT: Adding extended input device "USB2.0 VGA Webcam" (type: KEYBOARD, id 9)
    [ 16.470] (**) Option "xkb_rules" "evdev"
    [ 16.470] (**) Option "xkb_model" "pc104"
    [ 16.470] (**) Option "xkb_layout" "de"
    [ 16.471] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
    [ 16.472] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
    [ 16.472] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 16.472] (**) Asus WMI hotkeys: Applying InputClass "keyboard"
    [ 16.472] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
    [ 16.472] (**) Asus WMI hotkeys: always reports core events
    [ 16.472] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
    [ 16.472] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
    [ 16.472] (--) evdev: Asus WMI hotkeys: Found keys
    [ 16.472] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
    [ 16.472] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
    [ 16.472] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 10)
    [ 16.472] (**) Option "xkb_rules" "evdev"
    [ 16.472] (**) Option "xkb_model" "pc104"
    [ 16.472] (**) Option "xkb_layout" "de"
    [ 16.473] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 16.473] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [ 16.473] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.473] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
    [ 16.473] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 16.473] (**) AT Translated Set 2 keyboard: always reports core events
    [ 16.473] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 16.473] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 16.473] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 16.473] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 16.473] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 16.473] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 16.474] (**) Option "xkb_rules" "evdev"
    [ 16.474] (**) Option "xkb_model" "pc104"
    [ 16.474] (**) Option "xkb_layout" "de"
    [ 16.475] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    [ 16.475] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 16.475] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 16.475] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 16.475] (II) LoadModule: "synaptics"
    [ 16.475] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 16.475] (II) Module synaptics: vendor="X.Org Foundation"
    [ 16.475] compiled for 1.14.1, module version = 1.7.1
    [ 16.475] Module class: X.Org XInput Driver
    [ 16.475] ABI class: X.Org XInput driver, version 19.1
    [ 16.475] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 16.475] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 16.475] (**) Option "Device" "/dev/input/event10"
    [ 16.596] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 16.597] (**) Option "TapButton1" "1"
    [ 16.597] (**) Option "TapButton2" "2"
    [ 16.597] (**) Option "TapButton3" "3"
    [ 16.597] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 16.597] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 16.631] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
    [ 16.631] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 16.631] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 16.631] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 16.631] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 16.632] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 16.633] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 16.633] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 16.633] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 16.633] (II) No input driver specified, ignoring this device.
    [ 16.633] (II) This device may have been added with another device file.
    [ 30.465] (II) UnloadModule: "synaptics"
    [ 30.465] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 30.465] (II) UnloadModule: "evdev"
    [ 30.465] (II) evdev: Asus WMI hotkeys: Close
    [ 30.465] (II) UnloadModule: "evdev"
    [ 30.465] (II) evdev: USB2.0 VGA Webcam: Close
    [ 30.465] (II) UnloadModule: "evdev"
    [ 30.465] (II) evdev: Sleep Button: Close
    [ 30.465] (II) UnloadModule: "evdev"
    [ 30.465] (II) evdev: Power Button: Close
    [ 30.465] (II) UnloadModule: "evdev"
    [ 30.465] (II) evdev: Video Bus: Close
    [ 30.466] (II) UnloadModule: "evdev"
    [ 30.480] (EE) Server terminated successfully (0). Closing log file.
    ~/.xsession-errors
    Tracker-Message: Setting up monitor for changes to config file:'/home/oliver/.config/tracker/tracker-store.cfg'
    Tracker-Message: Setting up monitor for changes to config file:'/home/oliver/.config/tracker/tracker-store.cfg'
    gnome-session[1818]: WARNING: Failed to start app: Unable to start application: Kindprozess »dropboxd« konnte nicht ausgeführt werden (Datei oder Verzeichnis nicht gefunden)
    Tracker-Message: Setting up monitor for changes to config file:'/home/oliver/.config/tracker/tracker-miner-fs.cfg'
    ** Message: applet now removed from the notification area
    ** Message: using fallback from indicator to GtkStatusIcon
    (tracker-miner-fs:1925): Tracker-WARNING **: Invalid desktop file: 'file:///usr/share/desktop-directories/X-Unity-All-Applications.directory'
    (tracker-miner-fs:1925): Tracker-WARNING **: Couldn't get name, missing key (Name)
    JS ERROR: !!! WARNING: 'anonymous function does not always return a value'
    JS ERROR: !!! WARNING: file '/home/oliver/.local/share/gnome-shell/extensions/[email protected]/extension.js' line 597 exception 0 number 157
    JS ERROR: !!! WARNING: 'anonymous function does not always return a value'
    JS ERROR: !!! WARNING: file '/home/oliver/.local/share/gnome-shell/extensions/[email protected]/extension.js' line 1012 exception 0 number 157
    (gnome-shell:1897): Clutter-CRITICAL **: clutter_actor_insert_child_at_index: assertion `child->priv->parent == NULL' failed
    ** Message: applet now embedded in the notification area
    Fensterverwalter-Warnung:CurrentTime used to choose focus window; focus window may not be correct.
    Fensterverwalter-Warnung:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    (gnome-shell:1897): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
    Individuals will not be linked properly and creating new links between Personas will not work.
    The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
    gnome-session[1818]: WARNING: Could not launch application 'gdu-notification-daemon.desktop': Unable to start application: Kindprozess »/usr/lib/gnome-disk-utility/gdu-notification-daemon« konnte nicht ausgeführt werden (Datei oder Verzeichnis nicht gefunden)
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Bilder/Bildschirmfoto%20von%20%C2%BB2013-06-18%2022:43:01%C2%AB.png" was not found, exec: gnome-settings-daemon, mime_type: image/png
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/yi.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Mabu.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Sommerlager.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/MabuChongquan.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball1.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball2.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    (gnome-settings-daemon:1878): GLib-CRITICAL **: g_variant_get_int32: assertion `g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed
    ** (update-notifier:2110): WARNING **: log file empty (logrotate?) /var/log/dpkg.log
    ** (update-notifier:2110): WARNING **: log file empty (logrotate?) /var/log/apt/term.log
    WARNING:root:timeout reached, exiting
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Bilder/Bildschirmfoto%20von%20%C2%BB2013-06-18%2022:43:01%C2%AB.png" was not found, exec: gnome-settings-daemon, mime_type: image/png
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/yi.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Mabu.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Sommerlager.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/MabuChongquan.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball1.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    ** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball2.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
    Fensterverwalter-Warnung:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2600003 (Rhythmbox)
    Fensterverwalter-Warnung:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    Fensterverwalter-Warnung:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2600003 (Rhythmbox)
    Fensterverwalter-Warnung:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    Fensterverwalter-Warnung:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2600003 (Rhythmbox)
    Fensterverwalter-Warnung:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    (gnome-settings-daemon:1878): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1878): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (nm-applet:1933): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
    (update-notifier:2110): Gdk-WARNING **: update-notifier: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
    (evolution-alarm-notify:2061): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
    (gnome-screensaver:2031): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
    Fensterverwalter-Warnung:Log level 16: gnome-shell: Fatal IO error 0 (Erfolg) on X server :0.
    (gnome-shell-calendar-server:1967): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
    ** (zeitgeist-datahub:2032): WARNING **: zeitgeist-datahub.vala:227: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
    (tracker-miner-fs:1925): Tracker-CRITICAL **: Could not execute sparql: Verbindung ist geschlossen
    (tracker-miner-fs:1925): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Verbindung ist geschlossen
    (tracker-miner-fs:1925): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Verbindung ist geschlossen
    (tracker-miner-fs:1925): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Verbindung ist geschlossen
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 1788 requests (1788 known processed) with 0 events remaining.

    Meanwhile i found out that tracker could be the source of this problem. If not, tracker has a problem. first i tried to reinstall tracker, output was a lot of lines with:
    tracker: /usr/share/ tracker-concerning-files exist in filesystem
    then i deinstalled it. now when i want to install it, a similar output like obove comes.
    Last edited by meson11 (2013-08-05 16:29:52)

  • GNOME Shell login failed "Oh no! Something has gone wrong.."

    Firstly I saw many threads about this problem, but my problem still remains.
    I have installed GNOME Shell (3.12.2) along KDE :
    sudo pacman -S gnome-shell gnome gnome-extra
    Both worked fine until I have force installed `network-manager-applet-gtk2` : (which had conflict with `network-manager-applet`)
    sudo pacman --force network-manager-applet-gtk2
    After that, Gnome won't login and gets me following error at startup : (Alt+F4 not working)
    Oh no! Something has gone wrong... Log Out
    What's wrong with GNOME?
    P.S:
    KDE works fine.
    I'm using KDM (However gdm is installed).
    journatctl -b -0
    Output :
    -- Logs begin at Sat 2014-03-29 22:42:48 IRDT, end at Wed 2014-08-06 10:55:16 IRDT. --
    Aug 06 10:54:16 localhost systemd-journal[123]: Runtime journal is using 8.0M (max allowed 185.0M, trying to leave 277.5M free of 1.7G available → current limit 185.0M).
    Aug 06 10:54:16 localhost systemd-journal[123]: Runtime journal is using 8.0M (max allowed 185.0M, trying to leave 277.5M free of 1.7G available → current limit 185.0M).
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys cpuset
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys cpu
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys cpuacct
    Aug 06 10:54:16 localhost kernel: Linux version 3.15.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014
    Aug 06 10:54:16 localhost kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6591a4e5-8b02-463c-acb0-94d54f29e1ed rw quiet
    Aug 06 10:54:16 localhost kernel: e820: BIOS-provided physical RAM map:
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000de64afff] usable
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000de64b000-0x00000000de84afff] ACPI NVS
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000de84b000-0x00000000dfd3efff] usable
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfd3f000-0x00000000dfdbefff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfdbf000-0x00000000dfebefff] ACPI NVS
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef6fff] ACPI data
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfef7000-0x00000000dfefffff] usable
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x0000000100000000-0x000000010fffffff] usable
    Aug 06 10:54:16 localhost kernel: NX (Execute Disable) protection: active
    Aug 06 10:54:16 localhost kernel: SMBIOS 2.6 present.
    Aug 06 10:54:16 localhost kernel: DMI: Sony Corporation VPCEE23FX/VAIO, BIOS R0160Z5 06/10/2010
    Aug 06 10:54:16 localhost kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Aug 06 10:54:16 localhost kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Aug 06 10:54:16 localhost kernel: No AGP bridge found
    Aug 06 10:54:16 localhost kernel: e820: last_pfn = 0x110000 max_arch_pfn = 0x400000000
    Aug 06 10:54:16 localhost kernel: MTRR default type: uncachable
    Aug 06 10:54:16 localhost kernel: MTRR fixed ranges enabled:
    Aug 06 10:54:16 localhost kernel: 00000-9FFFF write-back
    Aug 06 10:54:16 localhost kernel: A0000-BFFFF uncachable
    Aug 06 10:54:16 localhost kernel: C0000-FFFFF write-through
    Aug 06 10:54:16 localhost kernel: MTRR variable ranges enabled:
    Aug 06 10:54:16 localhost kernel: 0 base 000000000000 mask FFFF80000000 write-back
    Aug 06 10:54:16 localhost kernel: 1 base 000080000000 mask FFFFC0000000 write-back
    Aug 06 10:54:16 localhost kernel: 2 base 0000C0000000 mask FFFFE0000000 write-back
    Aug 06 10:54:16 localhost kernel: 3 base 0000DFEBE000 mask FFFFFFFFF000 uncachable
    Aug 06 10:54:16 localhost kernel: 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
    Aug 06 10:54:16 localhost kernel: 5 base 000100000000 mask FFFFF0000000 write-back
    Aug 06 10:54:16 localhost kernel: 6 disabled
    Aug 06 10:54:16 localhost kernel: 7 disabled
    Aug 06 10:54:16 localhost kernel: TOM2: 0000000120000000 aka 4608M
    Aug 06 10:54:16 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Aug 06 10:54:16 localhost kernel: e820: last_pfn = 0xdff00 max_arch_pfn = 0x400000000
    Aug 06 10:54:16 localhost kernel: Scanning 1 areas for low memory corruption
    Aug 06 10:54:16 localhost kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Aug 06 10:54:16 localhost kernel: Using GB pages for direct mapping
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Aug 06 10:54:16 localhost kernel: [mem 0x00000000-0x000fffff] page 4k
    Aug 06 10:54:16 localhost kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
    Aug 06 10:54:16 localhost kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    Aug 06 10:54:16 localhost kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x10fe00000-0x10fffffff]
    Aug 06 10:54:16 localhost kernel: [mem 0x10fe00000-0x10fffffff] page 2M
    Aug 06 10:54:16 localhost kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x10c000000-0x10fdfffff]
    Aug 06 10:54:16 localhost kernel: [mem 0x10c000000-0x10fdfffff] page 2M
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x100000000-0x10bffffff]
    Aug 06 10:54:16 localhost kernel: [mem 0x100000000-0x10bffffff] page 2M
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x00100000-0xde64afff]
    Aug 06 10:54:16 localhost kernel: [mem 0x00100000-0x001fffff] page 4k
    Aug 06 10:54:16 localhost kernel: [mem 0x00200000-0x3fffffff] page 2M
    Aug 06 10:54:16 localhost kernel: [mem 0x40000000-0xbfffffff] page 1G
    Aug 06 10:54:16 localhost kernel: [mem 0xc0000000-0xde5fffff] page 2M
    Aug 06 10:54:16 localhost kernel: [mem 0xde600000-0xde64afff] page 4k
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0xde84b000-0xdfd3efff]
    Aug 06 10:54:16 localhost kernel: [mem 0xde84b000-0xde9fffff] page 4k
    Aug 06 10:54:16 localhost kernel: [mem 0xdea00000-0xdfbfffff] page 2M
    Aug 06 10:54:16 localhost kernel: [mem 0xdfc00000-0xdfd3efff] page 4k
    Aug 06 10:54:16 localhost kernel: BRK [0x01b42000, 0x01b42fff] PGTABLE
    Aug 06 10:54:16 localhost kernel: BRK [0x01b43000, 0x01b43fff] PGTABLE
    Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0xdfef7000-0xdfefffff]
    Aug 06 10:54:16 localhost kernel: [mem 0xdfef7000-0xdfefffff] page 4k
    Aug 06 10:54:16 localhost kernel: RAMDISK: [mem 0x379d4000-0x37ce1fff]
    Aug 06 10:54:16 localhost kernel: ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony )
    Aug 06 10:54:16 localhost kernel: ACPI: XSDT 0x00000000DFEF6120 00005C (v01 Sony VAIO 20100610 01000013)
    Aug 06 10:54:16 localhost kernel: ACPI: FACP 0x00000000DFEF5000 0000F4 (v04 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: DSDT 0x00000000DFEE8000 0099CD (v01 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: FACS 0x00000000DFE9C000 000040
    Aug 06 10:54:16 localhost kernel: ACPI: HPET 0x00000000DFEF4000 000038 (v01 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: APIC 0x00000000DFEF3000 000084 (v02 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: MCFG 0x00000000DFEF2000 00003C (v01 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: BOOT 0x00000000DFEE7000 000028 (v01 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: SLIC 0x00000000DFEE6000 000176 (v01 Sony VAIO 20100610 INTL 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: SSDT 0x00000000DFEE5000 000386 (v01 Sony VAIO 20100610 AMD 20061109)
    Aug 06 10:54:16 localhost kernel: ACPI: Local APIC address 0xfee00000
    Aug 06 10:54:16 localhost kernel: Scanning NUMA topology in Northbridge 24
    Aug 06 10:54:16 localhost kernel: No NUMA configuration found
    Aug 06 10:54:16 localhost kernel: Faking a node at [mem 0x0000000000000000-0x000000010fffffff]
    Aug 06 10:54:16 localhost kernel: Initmem setup node 0 [mem 0x00000000-0x10fffffff]
    Aug 06 10:54:16 localhost kernel: NODE_DATA [mem 0x10fff8000-0x10fffcfff]
    Aug 06 10:54:16 localhost kernel: [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88010ba00000-ffff88010f5fffff] on node 0
    Aug 06 10:54:16 localhost kernel: Zone ranges:
    Aug 06 10:54:16 localhost kernel: DMA [mem 0x00001000-0x00ffffff]
    Aug 06 10:54:16 localhost kernel: DMA32 [mem 0x01000000-0xffffffff]
    Aug 06 10:54:16 localhost kernel: Normal [mem 0x100000000-0x10fffffff]
    Aug 06 10:54:16 localhost kernel: Movable zone start for each node
    Aug 06 10:54:16 localhost kernel: Early memory node ranges
    Aug 06 10:54:16 localhost kernel: node 0: [mem 0x00001000-0x0009efff]
    Aug 06 10:54:16 localhost kernel: node 0: [mem 0x00100000-0xde64afff]
    Aug 06 10:54:16 localhost kernel: node 0: [mem 0xde84b000-0xdfd3efff]
    Aug 06 10:54:16 localhost kernel: node 0: [mem 0xdfef7000-0xdfefffff]
    Aug 06 10:54:16 localhost kernel: node 0: [mem 0x100000000-0x10fffffff]
    Aug 06 10:54:16 localhost kernel: On node 0 totalpages: 981734
    Aug 06 10:54:16 localhost kernel: DMA zone: 64 pages used for memmap
    Aug 06 10:54:16 localhost kernel: DMA zone: 21 pages reserved
    Aug 06 10:54:16 localhost kernel: DMA zone: 3998 pages, LIFO batch:0
    Aug 06 10:54:16 localhost kernel: DMA32 zone: 14254 pages used for memmap
    Aug 06 10:54:16 localhost kernel: DMA32 zone: 912200 pages, LIFO batch:31
    Aug 06 10:54:16 localhost kernel: Normal zone: 1024 pages used for memmap
    Aug 06 10:54:16 localhost kernel: Normal zone: 65536 pages, LIFO batch:15
    Aug 06 10:54:16 localhost kernel: ACPI: PM-Timer IO Port: 0x408
    Aug 06 10:54:16 localhost kernel: ACPI: Local APIC address 0xfee00000
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    Aug 06 10:54:16 localhost kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    Aug 06 10:54:16 localhost kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    Aug 06 10:54:16 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Aug 06 10:54:16 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Aug 06 10:54:16 localhost kernel: ACPI: IRQ0 used by override.
    Aug 06 10:54:16 localhost kernel: ACPI: IRQ2 used by override.
    Aug 06 10:54:16 localhost kernel: ACPI: IRQ9 used by override.
    Aug 06 10:54:16 localhost kernel: Using ACPI (MADT) for SMP configuration information
    Aug 06 10:54:16 localhost kernel: ACPI: HPET id: 0x1002a201 base: 0xfed00000
    Aug 06 10:54:16 localhost kernel: smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    Aug 06 10:54:16 localhost kernel: nr_irqs_gsi: 40
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xde64b000-0xde84afff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdfd3f000-0xdfdbefff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdfdbf000-0xdfebefff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdfebf000-0xdfef6fff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdff00000-0xf7ffffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xf9000000-0xfebfffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Aug 06 10:54:16 localhost kernel: e820: [mem 0xdff00000-0xf7ffffff] available for PCI devices
    Aug 06 10:54:16 localhost kernel: Booting paravirtualized kernel on bare hardware
    Aug 06 10:54:16 localhost kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Aug 06 10:54:16 localhost kernel: PERCPU: Embedded 29 pages/cpu @ffff88010fc00000 s87168 r8192 d23424 u524288
    Aug 06 10:54:16 localhost kernel: pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
    Aug 06 10:54:16 localhost kernel: pcpu-alloc: [0] 0 1 2 3
    Aug 06 10:54:16 localhost kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966371
    Aug 06 10:54:16 localhost kernel: Policy zone: Normal
    Aug 06 10:54:16 localhost kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6591a4e5-8b02-463c-acb0-94d54f29e1ed rw quiet
    Aug 06 10:54:16 localhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Aug 06 10:54:16 localhost kernel: Checking aperture...
    Aug 06 10:54:16 localhost kernel: No AGP bridge found
    Aug 06 10:54:16 localhost kernel: Node 0: aperture @ d4000000 size 32 MB
    Aug 06 10:54:16 localhost kernel: Aperture pointing to e820 RAM. Ignoring.
    Aug 06 10:54:16 localhost kernel: Your BIOS doesn't leave a aperture memory hole
    Aug 06 10:54:16 localhost kernel: Please enable the IOMMU option in the BIOS setup
    Aug 06 10:54:16 localhost kernel: This costs you 64 MB of RAM
    Aug 06 10:54:16 localhost kernel: Mapping aperture over 65536 KB of RAM @ d4000000
    Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
    Aug 06 10:54:16 localhost kernel: Memory: 3718412K/3926936K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 208524K reserved)
    Aug 06 10:54:16 localhost kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Aug 06 10:54:16 localhost kernel: Preemptible hierarchical RCU implementation.
    Aug 06 10:54:16 localhost kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Aug 06 10:54:16 localhost kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Aug 06 10:54:16 localhost kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Aug 06 10:54:16 localhost kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    Aug 06 10:54:16 localhost kernel: NR_IRQS:8448 nr_irqs:712 16
    Aug 06 10:54:16 localhost kernel: spurious 8259A interrupt: IRQ7.
    Aug 06 10:54:16 localhost kernel: Console: colour dummy device 80x25
    Aug 06 10:54:16 localhost kernel: console [tty0] enabled
    Aug 06 10:54:16 localhost kernel: allocated 15728640 bytes of page_cgroup
    Aug 06 10:54:16 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Aug 06 10:54:16 localhost kernel: hpet clockevent registered
    Aug 06 10:54:16 localhost kernel: tsc: Fast TSC calibration using PIT
    Aug 06 10:54:16 localhost kernel: tsc: Detected 2094.565 MHz processor
    Aug 06 10:54:16 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.67 BogoMIPS (lpj=6981883)
    Aug 06 10:54:16 localhost kernel: pid_max: default: 32768 minimum: 301
    Aug 06 10:54:16 localhost kernel: ACPI: Core revision 20140214
    Aug 06 10:54:16 localhost kernel: ACPI: All ACPI Tables successfully acquired
    Aug 06 10:54:16 localhost kernel: Security Framework initialized
    Aug 06 10:54:16 localhost kernel: Yama: becoming mindful.
    Aug 06 10:54:16 localhost kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Aug 06 10:54:16 localhost kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Aug 06 10:54:16 localhost kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Aug 06 10:54:16 localhost kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys memory
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys devices
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys freezer
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys net_cls
    Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys blkio
    Aug 06 10:54:16 localhost kernel: tseg: 00dff00000
    Aug 06 10:54:16 localhost kernel: CPU: Physical Processor ID: 0
    Aug 06 10:54:16 localhost kernel: CPU: Processor Core ID: 0
    Aug 06 10:54:16 localhost kernel: mce: CPU supports 6 MCE banks
    Aug 06 10:54:16 localhost kernel: LVT offset 0 assigned for vector 0xf9
    Aug 06 10:54:16 localhost kernel: process: using AMD E400 aware idle routine
    Aug 06 10:54:16 localhost kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    tlb_flushall_shift: 6
    Aug 06 10:54:16 localhost kernel: Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
    Aug 06 10:54:16 localhost kernel: ftrace: allocating 20230 entries in 80 pages
    Aug 06 10:54:16 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Aug 06 10:54:16 localhost kernel: smpboot: CPU0: AMD Athlon(tm) II P320 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
    Aug 06 10:54:16 localhost kernel: Performance Events: AMD PMU driver.
    Aug 06 10:54:16 localhost kernel: ... version: 0
    Aug 06 10:54:16 localhost kernel: ... bit width: 48
    Aug 06 10:54:16 localhost kernel: ... generic registers: 4
    Aug 06 10:54:16 localhost kernel: ... value mask: 0000ffffffffffff
    Aug 06 10:54:16 localhost kernel: ... max period: 00007fffffffffff
    Aug 06 10:54:16 localhost kernel: ... fixed-purpose events: 0
    Aug 06 10:54:16 localhost kernel: ... event mask: 000000000000000f
    Aug 06 10:54:16 localhost kernel: process: System has AMD C1E enabled
    Aug 06 10:54:16 localhost kernel: process: Switch to broadcast mode on CPU0
    Aug 06 10:54:16 localhost kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Aug 06 10:54:16 localhost kernel: x86: Booting SMP configuration:
    Aug 06 10:54:16 localhost kernel: .... node #0, CPUs: #1
    Aug 06 10:54:16 localhost kernel: x86: Booted up 1 node, 2 CPUs
    Aug 06 10:54:16 localhost kernel: smpboot: Total of 2 processors activated (8381.35 BogoMIPS)
    Aug 06 10:54:16 localhost kernel: process: Switch to broadcast mode on CPU1
    Aug 06 10:54:16 localhost kernel: devtmpfs: initialized
    Aug 06 10:54:16 localhost kernel: PM: Registering ACPI NVS region [mem 0xde64b000-0xde84afff] (2097152 bytes)
    Aug 06 10:54:16 localhost kernel: PM: Registering ACPI NVS region [mem 0xdfdbf000-0xdfebefff] (1048576 bytes)
    Aug 06 10:54:16 localhost kernel: pinctrl core: initialized pinctrl subsystem
    Aug 06 10:54:16 localhost kernel: RTC time: 10:54:09, date: 08/06/14
    Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 16
    Aug 06 10:54:16 localhost kernel: cpuidle: using governor ladder
    Aug 06 10:54:16 localhost kernel: cpuidle: using governor menu
    Aug 06 10:54:16 localhost kernel: node 0 link 0: io port [0, ffffff]
    Aug 06 10:54:16 localhost kernel: TOM: 00000000e0000000 aka 3584M
    Aug 06 10:54:16 localhost kernel: Fam 10h mmconf [mem 0xf8000000-0xfbffffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [a0000, bffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [e0000000, efffffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f0000000, f40fffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f4100000, f42fffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f4300000, f6ffffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f7000000, f7ffffff]
    Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f8000000, ff7fffff] ==> [fc000000, ff7fffff]
    Aug 06 10:54:16 localhost kernel: TOM2: 0000000120000000 aka 4608M
    Aug 06 10:54:16 localhost kernel: bus: [bus 00-1f] on node 0 link 0
    Aug 06 10:54:16 localhost kernel: bus: 00 [io 0x0000-0xffff]
    Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0x000a0000-0x000bffff]
    Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0xe0000000-0xf7ffffff]
    Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0xfc000000-0xffffffff]
    Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0x120000000-0xfcffffffff]
    Aug 06 10:54:16 localhost kernel: ACPI: bus type PCI registered
    Aug 06 10:54:16 localhost kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Aug 06 10:54:16 localhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000)
    Aug 06 10:54:16 localhost kernel: PCI: MMCONFIG at [mem 0xf8000000-0xf8ffffff] reserved in E820
    Aug 06 10:54:16 localhost kernel: PCI: Using configuration type 1 for base access
    Aug 06 10:54:16 localhost kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
    Aug 06 10:54:16 localhost kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Aug 06 10:54:16 localhost kernel: mtrr: probably your BIOS does not setup all CPUs.
    Aug 06 10:54:16 localhost kernel: mtrr: corrected configuration.
    Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(Module Device)
    Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(Processor Device)
    Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Aug 06 10:54:16 localhost kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Aug 06 10:54:16 localhost kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Aug 06 10:54:16 localhost kernel: ACPI: Interpreter enabled
    Aug 06 10:54:16 localhost kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
    Aug 06 10:54:16 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Aug 06 10:54:16 localhost kernel: ACPI: Using IOAPIC for interrupt routing
    Aug 06 10:54:16 localhost kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
    Aug 06 10:54:16 localhost kernel: PCI host bridge to bus 0000:00
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf6ffffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: [104d:9602] type 01 class 0x060400
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
    Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x10: [io 0xb038-0xb03f]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x14: [io 0xb04c-0xb04f]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x18: [io 0xb030-0xb037]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x1c: [io 0xb048-0xb04b]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x20: [io 0xb010-0xb01f]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x24: [mem 0xf4308000-0xf43083ff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.0: reg 0x10: [mem 0xf4307000-0xf4307fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: reg 0x10: [mem 0xf4308600-0xf43086ff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.0: reg 0x10: [mem 0xf4306000-0xf4306fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: reg 0x10: [mem 0xf4308500-0xf43085ff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x20: [io 0xb000-0xb00f]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.2: reg 0x10: [mem 0xf4300000-0xf4303fff 64bit]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.5: reg 0x10: [mem 0xf4305000-0xf4305fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.0: reg 0x10: [mem 0xf4304000-0xf4304fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.0: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: reg 0x10: [mem 0xf4308400-0xf43084ff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: System wakeup disabled by ACPI
    Aug 06 10:54:16 localhost kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    Aug 06 10:54:16 localhost kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    Aug 06 10:54:16 localhost kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    Aug 06 10:54:16 localhost kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    Aug 06 10:54:16 localhost kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x14: [io 0xa000-0xa0ff]
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x18: [mem 0xf4200000-0xf420ffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x24: [mem 0xf4100000-0xf41fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.1: reg 0x10: [mem 0xf4210000-0xf4213fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.1: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf42fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: reg 0x10: [io 0x6000-0x60ff]
    Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: supports D1 D2
    Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: PCI bridge to [bus 02-07]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [io 0x6000-0x9fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf3100000-0xf40fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
    Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: reg 0x10: [mem 0xf3000000-0xf300ffff 64bit]
    Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: supports D1
    Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold
    Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: PCI bridge to [bus 09]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xf3000000-0xf30fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 0a] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfed3ffff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: PCI bridge to [bus 0b-10]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [io 0x2000-0x5fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf2000000-0xf2ffffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: on NUMA node 0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Aug 06 10:54:16 localhost kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
    Aug 06 10:54:16 localhost kernel: ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    Aug 06 10:54:16 localhost kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    Aug 06 10:54:16 localhost kernel: vgaarb: loaded
    Aug 06 10:54:16 localhost kernel: vgaarb: bridge control possible 0000:01:05.0
    Aug 06 10:54:16 localhost kernel: PCI: Using ACPI for IRQ routing
    Aug 06 10:54:16 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
    Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0xde64b000-0xdfffffff]
    Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0xdfd3f000-0xdfffffff]
    Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff]
    Aug 06 10:54:16 localhost kernel: NetLabel: Initializing
    Aug 06 10:54:16 localhost kernel: NetLabel: domain hash size = 128
    Aug 06 10:54:16 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Aug 06 10:54:16 localhost kernel: NetLabel: unlabeled traffic allowed by default
    Aug 06 10:54:16 localhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Aug 06 10:54:16 localhost kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Aug 06 10:54:16 localhost kernel: Switched to clocksource hpet
    Aug 06 10:54:16 localhost kernel: pnp: PnP ACPI init
    Aug 06 10:54:16 localhost kernel: ACPI: bus type PNP registered
    Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xf7000000-0xf7ffffff] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Aug 06 10:54:16 localhost kernel: pnp 00:01: [dma 4]
    Aug 06 10:54:16 localhost kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Aug 06 10:54:16 localhost kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
    Aug 06 10:54:16 localhost kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    Aug 06 10:54:16 localhost kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    Aug 06 10:54:16 localhost kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    Aug 06 10:54:16 localhost kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0400-0x04cf] could not be reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x04d6] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0680-0x06ff] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x077a] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c00-0x0c01] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c14] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c50-0x0c52] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c6c] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c6f] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0cd0-0x0cdb] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    Aug 06 10:54:16 localhost kernel: system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
    Aug 06 10:54:16 localhost kernel: system 00:08: [mem 0xffe00000-0xffffffff] has been reserved
    Aug 06 10:54:16 localhost kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
    Aug 06 10:54:16 localhost kernel: pnp: PnP ACPI: found 9 devices
    Aug 06 10:54:16 localhost kernel: ACPI: bus type PNP unregistered
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf42fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: PCI bridge to [bus 02-07]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [io 0x6000-0x9fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf3100000-0xf40fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: PCI bridge to [bus 09]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xf3000000-0xf30fffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 0a]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: PCI bridge to [bus 0b-10]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [io 0x2000-0x5fff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf2000000-0xf2ffffff]
    Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf6ffffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf42fffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:02: resource 0 [io 0x6000-0x9fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf40fffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:09: resource 1 [mem 0xf3000000-0xf30fffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000c3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 8 [mem 0x000c4000-0x000c7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 9 [mem 0x000c8000-0x000cbfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 10 [mem 0x000d0000-0x000d3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 11 [mem 0x000d4000-0x000d7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 12 [mem 0x000d8000-0x000dbfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 13 [mem 0x000dc000-0x000dffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 14 [mem 0x000e0000-0x000e3fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 15 [mem 0x000e4000-0x000e7fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 16 [mem 0x000e8000-0x000ebfff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 17 [mem 0x000ec000-0x000effff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 18 [mem 0xe0000000-0xf6ffffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 19 [mem 0xf8000000-0xfed3ffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 20 [mem 0xfed45000-0xffffffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0b: resource 0 [io 0x2000-0x5fff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0b: resource 1 [mem 0xf2000000-0xf2ffffff]
    Aug 06 10:54:16 localhost kernel: pci_bus 0000:0b: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
    Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 2
    Aug 06 10:54:16 localhost kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    Aug 06 10:54:16 localhost kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    Aug 06 10:54:16 localhost kernel: TCP: Hash tables configured (established 32768 bind 32768)
    Aug 06 10:54:16 localhost kernel: TCP: reno registered
    Aug 06 10:54:16 localhost kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Aug 06 10:54:16 localhost kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 1
    Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: Boot video device
    Aug 06 10:54:16 localhost kernel: PCI: CLS 64 bytes, default 64
    Aug 06 10:54:16 localhost kernel: Unpacking initramfs...
    Aug 06 10:54:16 localhost kernel: Freeing initrd memory: 3128K (ffff8800379d4000 - ffff880037ce2000)
    Aug 06 10:54:16 localhost kernel: PCI-DMA: Disabling AGP.
    Aug 06 10:54:16 localhost kernel: PCI-DMA: aperture base @ d4000000 size 65536 KB
    Aug 06 10:54:16 localhost kernel: PCI-DMA: using GART IOMMU.
    Aug 06 10:54:16 localhost kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Aug 06 10:54:16 localhost kernel: Simple Boot Flag at 0x44 set to 0x1
    Aug 06 10:54:16 localhost kernel: LVT offset 1 assigned for vector 0x400
    Aug 06 10:54:16 localhost kernel: IBS: LVT offset 1 assigned
    Aug 06 10:54:16 localhost kernel: perf: AMD IBS detected (0x0000001f)
    Aug 06 10:54:16 localhost kernel: Scanning for low memory corruption every 60 seconds
    Aug 06 10:54:16 localhost kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
    Aug 06 10:54:16 localhost kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Aug 06 10:54:16 localhost kernel: zbud: loaded
    Aug 06 10:54:16 localhost kernel: VFS: Disk quotas dquot_6.5.2
    Aug 06 10:54:16 localhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Aug 06 10:54:16 localhost kernel: msgmni has been set to 7397
    Aug 06 10:54:16 localhost kernel: Key type big_key registered
    Aug 06 10:54:16 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Aug 06 10:54:16 localhost kernel: io scheduler noop registered
    Aug 06 10:54:16 localhost kernel: io scheduler deadline registered
    Aug 06 10:54:16 localhost kernel: io scheduler cfq registered (default)
    Aug 06 10:54:16 localhost kernel: pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
    Aug 06 10:54:16 localhost kernel: pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
    Aug 06 10:54:16 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Aug 06 10:54:16 localhost kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Aug 06 10:54:16 localhost kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
    Aug 06 10:54:16 localhost kernel: vesafb: scrolling: redraw
    Aug 06 10:54:16 localhost kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Aug 06 10:54:16 localhost kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001780000, using 3072k, total 3072k
    Aug 06 10:54:16 localhost kernel: Console: switching to colour frame buffer device 128x48
    Aug 06 10:54:16 localhost kernel: fb0: VESA VGA frame buffer device
    Aug 06 10:54:16 localhost kernel: GHES: HEST is not enabled!
    Aug 06 10:54:16 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Aug 06 10:54:16 localhost kernel: Linux agpgart interface v0.103
    Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
    Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs
    Aug 06 10:54:16 localhost kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Aug 06 10:54:16 localhost kernel: TCP: cubic registered
    Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 10
    Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 17
    Aug 06 10:54:16 localhost kernel: registered taskstats version 1
    Aug 06 10:54:16 localhost kernel: Magic number: 10:412:931
    Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: setting system clock to 2014-08-06 10:54:10 UTC (1407322450)
    Aug 06 10:54:16 localhost kernel: PM: Hibernation image not present or could not be loaded.
    Aug 06 10:54:16 localhost kernel: Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
    Aug 06 10:54:16 localhost kernel: Write protecting the kernel read-only data: 8192k
    Aug 06 10:54:16 localhost kernel: Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
    Aug 06 10:54:16 localhost kernel: Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
    Aug 06 10:54:16 localhost kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
    Aug 06 10:54:16 localhost systemd-udevd[47]: starting version 215
    Aug 06 10:54:16 localhost kernel: i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Aug 06 10:54:16 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Aug 06 10:54:16 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Aug 06 10:54:16 localhost kernel: SCSI subsystem initialized
    Aug 06 10:54:16 localhost kernel: libata version 3.00 loaded.
    Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: version 3.0
    Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: irq 42 for MSI/MSI-X
    Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    Aug 06 10:54:16 localhost kernel: ACPI: bus type USB registered
    Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver usbfs
    Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver hub
    Aug 06 10:54:16 localhost kernel: scsi0 : ahci
    Aug 06 10:54:16 localhost kernel: usbcore: registered new device driver usb
    Aug 06 10:54:16 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Aug 06 10:54:16 localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Aug 06 10:54:16 localhost kernel: ohci-pci: OHCI PCI platform driver
    Aug 06 10:54:16 localhost kernel: ehci-pci: EHCI PCI platform driver
    Aug 06 10:54:16 localhost kernel: scsi1 : ahci
    Aug 06 10:54:16 localhost kernel: ata1: SATA max UDMA/133 abar m1024@0xf4308000 port 0xf4308100 irq 42
    Aug 06 10:54:16 localhost kernel: ata2: SATA max UDMA/133 abar m1024@0xf4308000 port 0xf4308180 irq 42
    Aug 06 10:54:16 localhost kernel: scsi2 : pata_atiixp
    Aug 06 10:54:16 localhost kernel: scsi3 : pata_atiixp
    Aug 06 10:54:16 localhost kernel: ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb000 irq 14
    Aug 06 10:54:16 localhost kernel: ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb008 irq 15
    Aug 06 10:54:16 localhost kernel: QUIRK: Enable AMD PLL fix
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xf4307000
    Aug 06 10:54:16 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: 5 ports detected
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xf4306000
    Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: 5 ports detected
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 3
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xf4305000
    Aug 06 10:54:16 localhost kernel: hub 3-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 3-0:1.0: 2 ports detected
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
    Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xf4304000
    Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: 4 ports detected
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: debug port 1
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xf4308600
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Aug 06 10:54:16 localhost kernel: hub 5-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 5-0:1.0: 5 ports detected
    Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: 5 ports detected
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: debug port 1
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xf4308500
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    Aug 06 10:54:16 localhost kernel: hub 6-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 6-0:1.0: 5 ports detected
    Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: 5 ports detected
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: debug port 1
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xf4308400
    Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    Aug 06 10:54:16 localhost kernel: hub 7-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 7-0:1.0: 4 ports detected
    Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: USB hub found
    Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: 4 ports detected
    Aug 06 10:54:16 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Aug 06 10:54:16 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Aug 06 10:54:16 localhost kernel: ata1.00: ATA-8: SAMSUNG HM321HI, 2AJ10001, max UDMA/133
    Aug 06 10:54:16 localhost kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Aug 06 10:54:16 localhost kernel: ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, KS05, max UDMA/100
    Aug 06 10:54:16 localhost kernel: ata2.00: configured for UDMA/100
    Aug 06 10:54:16 localhost kernel: ata1.00: configured for UDMA/133
    Aug 06 10:54:16 localhost kernel: scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM321HI 2AJ1 PQ: 0 ANSI: 5
    Aug 06 10:54:16 localhost kernel: scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N KS05 PQ: 0 ANSI: 5
    Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
    Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Aug 06 10:54:16 localhost kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Aug 06 10:54:16 localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Aug 06 10:54:16 localhost kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Aug 06 10:54:16 localhost kernel: sda: sda1 sda3 sda4 < sda5 sda6 sda7 sda8 >
    Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Aug 06 10:54:16 localhost kernel: tsc: Refined TSC clocksource calibration: 2094.754 MHz
    Aug 06 10:54:16 localhost kernel: usb 1-3: new low-speed USB device number 2 using ohci-pci
    Aug 06 10:54:16 localhost kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver usbhid
    Aug 06 10:54:16 localhost kernel: usbhid: USB HID core driver
    Aug 06 10:54:16 localhost kernel: input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:15D9:0A4F.0001/input/input2
    Aug 06 10:54:16 localhost kernel: hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
    Aug 06 10:54:16 localhost kernel: usb 6-3: new high-speed USB device number 2 using ehci-pci
    Aug 06 10:54:16 localhost kernel: usb 7-3: new high-speed USB device number 2 using ehci-pci
    Aug 06 10:54:16 localhost kernel: Switched to clocksource tsc
    Aug 06 10:54:16 localhost kernel: random: nonblocking pool is initialized
    Aug 06 10:54:16 localhost kernel: usb-storage 7-3:1.0: USB Mass Storage device detected
    Aug 06 10:54:16 localhost kernel: scsi4 : usb-storage 7-3:1.0
    Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver usb-storage
    Aug 06 10:54:16 localhost kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Aug 06 10:54:16 localhost systemd[1]: RTC configured in localtime, applying delta of 270 minutes to system time.
    Aug 06 10:54:16 localhost kernel: scsi 4:0:0:0: Direct-Access Generic 2.0 Reader -SD 1.00 PQ: 0 ANSI: 0 CCS
    Aug 06 10:54:16 localhost kernel: scsi 4:0:0:1: Direct-Access Generic 2.0 Reader -MS 1.00 PQ: 0 ANSI: 0 CCS
    Aug 06 10:54:16 localhost kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk
    Aug 06 10:54:16 localhost kernel: sd 4:0:0:1: [sdc] Attached SCSI removable disk
    Aug 06 10:54:16 localhost systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
    Aug 06 10:54:16 localhost systemd-readahead[117]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    Aug 06 10:54:16 localhost kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Aug 06 10:54:16 localhost systemd-journal[123]: Journal started
    Aug 06 10:54:16 localhost systemd-udevd[149]: starting version 215
    Aug 06 10:54:21 localhost kernel: ACPI: processor limited to max C-state 1
    Aug 06 10:54:21 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
    Aug 06 10:54:21 localhost kernel: ACPI: Power Button [PWRB]
    Aug 06 10:54:21 localhost kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
    Aug 06 10:54:21 localhost kernel: ACPI: Lid Switch [LID]
    Aug 06 10:54:21 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    Aug 06 10:54:21 localhost kernel: ACPI: Power Button [PWRF]
    Aug 06 10:54:21 localhost kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    Aug 06 10:54:21 localhost kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
    Aug 06 10:54:21 localhost kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    Aug 06 10:54:21 localhost kernel: acpi device:01: registered as cooling_device2
    Aug 06 10:54:21 localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
    Aug 06 10:54:21 localhost kernel: acpi-cpufreq: overriding BIOS provided _PSD data
    Aug 06 10:54:21 localhost kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    Aug 06 10:54:21 localhost kernel: sp5100_tco: PCI Revision ID: 0x41
    Aug 06 10:54:21 localhost kernel: sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
    Aug 06 10:54:21 localhost kernel: sp5100_tco: Last reboot was not triggered by watchdog.
    Aug 06 10:54:21 localhost kernel: sp5100_tco: initialized (0xffffc90001fe0b00). heartbeat=60 sec (nowayout=0)
    Aug 06 10:54:21 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Aug 06 10:54:21 localhost kernel: thermal LNXTHERM:00: registered as thermal_zone0
    Aug 06 10:54:21 localhost kernel: ACPI: Thermal Zone [THRM] (52 C)
    Aug 06 10:54:21 localhost kernel: ACPI: Battery Slot [BAT1] (battery present)
    Aug 06 10:54:21 localhost kernel: ACPI: AC Adapter [ACAD] (on-line)
    Aug 06 10:54:22 localhost kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0: irq 43 for MSI/MSI-X
    Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90002068000, 54:42:49:2b:87:32, XID 0c100000 IRQ 43
    Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    Aug 06 10:54:22 localhost kernel: input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/SNY5001:00/input/input7
    Aug 06 10:54:22 localhost kernel: input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/SNY5001:00/input/input8
    Aug 06 10:54:22 localhost kernel: sony_laptop: brightness ignored, must be controlled by ACPI video driver
    Aug 06 10:54:22 localhost kernel: sony_laptop: SNC setup done.
    Aug 06 10:54:22 localhost kernel: [drm] Initialized drm 1.1.0 20060810
    Aug 06 10:54:22 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
    Aug 06 10:54:23 localhost kernel: [drm] radeon kernel modesetting enabled.
    Aug 06 10:54:23 localhost kernel: checking generic (e0000000 300000) vs hw (e0000000 10000000)
    Aug 06 10:54:23 localhost kernel: fb: switching to radeondrmfb from VESA VGA
    Aug 06 10:54:23 localhost kernel: Console: switching to colour dummy device 80x25
    Aug 06 10:54:23 localhost kernel: [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x104D:0x9077).
    Aug 06 10:54:23

    I pressed Ctrl + Alt + F1 and then exported these Logs :
    "~/.xsession-errors" is empty!
    But
    /var/log/Xorg.0.log
    [ 25.933]
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    [ 25.933] X Protocol Version 11, Revision 0
    [ 25.933] Build Operating System: Linux 3.15.5-2-ARCH x86_64
    [ 25.933] Current Operating System: Linux localhost 3.15.8-1-ARCH #1 SMP PREEMPT Fri Aug 1 08:51:42 CEST 2014 x86_64
    [ 25.933] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6591a4e5-8b02-463c-acb0-94d54f29e1ed rw quiet
    [ 25.933] Build Date: 31 July 2014 11:53:19AM
    [ 25.933]
    [ 25.933] Current version of pixman: 0.32.6
    [ 25.933] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 25.933] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 25.933] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 8 11:01:40 2014
    [ 26.090] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 26.090] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 26.091] (==) No Layout section. Using the first Screen section.
    [ 26.091] (==) No screen section available. Using defaults.
    [ 26.091] (**) |-->Screen "Default Screen Section" (0)
    [ 26.091] (**) | |-->Monitor "<default monitor>"
    [ 26.091] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 26.091] (==) Automatically adding devices
    [ 26.091] (==) Automatically enabling devices
    [ 26.091] (==) Automatically adding GPU devices
    [ 26.091] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 26.091] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 26.091] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 26.091] (II) Loader magic: 0x818d80
    [ 26.091] (II) Module ABI versions:
    [ 26.091] X.Org ANSI C Emulation: 0.4
    [ 26.091] X.Org Video Driver: 18.0
    [ 26.091] X.Org XInput driver : 21.0
    [ 26.091] X.Org Server Extension : 8.0
    [ 26.094] (EE) systemd-logind: failed to get session: PID 447 does not belong to any known session
    [ 26.095] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 26.097] (--) PCI:*(0:1:5:0) 1002:9712:104d:9077 rev 0, Mem @ 0xe0000000/268435456, 0xf4200000/65536, 0xf4100000/1048576, I/O @ 0x0000a000/256
    [ 26.097] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 26.097] (II) LoadModule: "glx"
    [ 26.265] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 26.269] (II) Module glx: vendor="X.Org Foundation"
    [ 26.269] compiled for 1.16.0, module version = 1.0.0
    [ 26.269] ABI class: X.Org Server Extension, version 8.0
    [ 26.269] (==) AIGLX enabled
    [ 26.269] (==) Matched ati as autoconfigured driver 0
    [ 26.269] (==) Matched ati as autoconfigured driver 1
    [ 26.269] (==) Matched modesetting as autoconfigured driver 2
    [ 26.269] (==) Matched fbdev as autoconfigured driver 3
    [ 26.269] (==) Matched vesa as autoconfigured driver 4
    [ 26.269] (==) Assigned the driver to the xf86ConfigLayout
    [ 26.269] (II) LoadModule: "ati"
    [ 26.269] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 26.270] (II) Module ati: vendor="X.Org Foundation"
    [ 26.270] compiled for 1.16.0, module version = 7.4.0
    [ 26.270] Module class: X.Org Video Driver
    [ 26.270] ABI class: X.Org Video Driver, version 18.0
    [ 26.270] (II) LoadModule: "radeon"
    [ 26.270] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 26.271] (II) Module radeon: vendor="X.Org Foundation"
    [ 26.271] compiled for 1.16.0, module version = 7.4.0
    [ 26.271] Module class: X.Org Video Driver
    [ 26.271] ABI class: X.Org Video Driver, version 18.0
    [ 26.271] (II) LoadModule: "modesetting"
    [ 26.271] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 26.271] (II) Module modesetting: vendor="X.Org Foundation"
    [ 26.271] compiled for 1.16.0, module version = 0.9.0
    [ 26.271] Module class: X.Org Video Driver
    [ 26.271] ABI class: X.Org Video Driver, version 18.0
    [ 26.271] (II) LoadModule: "fbdev"
    [ 26.272] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 26.272] (II) Module fbdev: vendor="X.Org Foundation"
    [ 26.272] compiled for 1.16.0, module version = 0.4.4
    [ 26.272] Module class: X.Org Video Driver
    [ 26.272] ABI class: X.Org Video Driver, version 18.0
    [ 26.272] (II) LoadModule: "vesa"
    [ 26.272] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 26.272] (II) Module vesa: vendor="X.Org Foundation"
    [ 26.272] compiled for 1.16.0, module version = 2.3.2
    [ 26.272] Module class: X.Org Video Driver
    [ 26.272] ABI class: X.Org Video Driver, version 18.0
    [ 26.273] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
    HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 26.280] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 26.280] (II) FBDEV: driver for framebuffer: fbdev
    [ 26.280] (II) VESA: driver for VESA chipsets: vesa
    [ 26.280] (++) using VT number 7
    [ 26.292] (II) [KMS] Kernel modesetting enabled.
    [ 26.292] (WW) Falling back to old probe method for modesetting
    [ 26.292] (WW) Falling back to old probe method for fbdev
    [ 26.292] (II) Loading sub module "fbdevhw"
    [ 26.292] (II) LoadModule: "fbdevhw"
    [ 26.293] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 26.293] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 26.293] compiled for 1.16.0, module version = 0.0.2
    [ 26.293] ABI class: X.Org Video Driver, version 18.0
    [ 26.293] (WW) Falling back to old probe method for vesa
    [ 26.293] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 26.293] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 26.293] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 26.293] (==) RADEON(0): Default visual is TrueColor
    [ 26.293] (==) RADEON(0): RGB weight 888
    [ 26.293] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 26.293] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712)
    [ 26.294] (II) Loading sub module "dri2"
    [ 26.294] (II) LoadModule: "dri2"
    [ 26.294] (II) Module "dri2" already built-in
    [ 26.294] (II) Loading sub module "exa"
    [ 26.294] (II) LoadModule: "exa"
    [ 26.294] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 26.294] (II) Module exa: vendor="X.Org Foundation"
    [ 26.294] compiled for 1.16.0, module version = 2.6.0
    [ 26.294] ABI class: X.Org Video Driver, version 18.0
    [ 26.294] (II) RADEON(0): KMS Color Tiling: enabled
    [ 26.294] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 26.294] (II) RADEON(0): KMS Pageflipping: enabled
    [ 26.295] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 26.313] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 26.314] (II) RADEON(0): Output LVDS has no monitor section
    [ 26.316] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 26.337] (II) RADEON(0): EDID for output VGA-0
    [ 26.337] (II) RADEON(0): EDID for output LVDS
    [ 26.337] (II) RADEON(0): Manufacturer: LGD Model: d901 Serial#: 0
    [ 26.337] (II) RADEON(0): Year: 2008 Week: 0
    [ 26.337] (II) RADEON(0): EDID Version: 1.3
    [ 26.337] (II) RADEON(0): Digital Display Input
    [ 26.337] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 26.337] (II) RADEON(0): Gamma: 2.20
    [ 26.337] (II) RADEON(0): No DPMS capabilities specified
    [ 26.337] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 26.337] (II) RADEON(0): First detailed timing is preferred mode
    [ 26.337] (II) RADEON(0): redX: 0.640 redY: 0.353 greenX: 0.319 greenY: 0.572
    [ 26.337] (II) RADEON(0): blueX: 0.148 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
    [ 26.337] (II) RADEON(0): Manufacturer's mask: 0
    [ 26.337] (II) RADEON(0): Supported detailed timing:
    [ 26.337] (II) RADEON(0): clock: 72.3 MHz Image Size: 344 x 194 mm
    [ 26.337] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 26.337] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
    [ 26.337] (II) RADEON(0): LG Display
    [ 26.337] (II) RADEON(0): LP156WH1-TLC1
    [ 26.337] (II) RADEON(0): EDID (in hex):
    [ 26.337] (II) RADEON(0): 00ffffffffffff0030e401d900000000
    [ 26.337] (II) RADEON(0): 00120103802213780ade05a35a519226
    [ 26.337] (II) RADEON(0): 1a505400000001010101010101010101
    [ 26.337] (II) RADEON(0): 0101010101013e1c56a0500016303020
    [ 26.337] (II) RADEON(0): 350058c2100000190000000000000000
    [ 26.338] (II) RADEON(0): 00000000000000000000000000fe004c
    [ 26.338] (II) RADEON(0): 4720446973706c61790a2020000000fe
    [ 26.338] (II) RADEON(0): 004c503135365748312d544c4331004e
    [ 26.338] (II) RADEON(0): Printing probed modes for output LVDS
    [ 26.338] (II) RADEON(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz eP)
    [ 26.338] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
    [ 26.338] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 26.338] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 26.338] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 26.338] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
    [ 26.338] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
    [ 26.338] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 26.340] (II) RADEON(0): EDID for output HDMI-0
    [ 26.340] (II) RADEON(0): Output VGA-0 disconnected
    [ 26.340] (II) RADEON(0): Output LVDS connected
    [ 26.340] (II) RADEON(0): Output HDMI-0 disconnected
    [ 26.340] (II) RADEON(0): Using exact sizes for initial modes
    [ 26.340] (II) RADEON(0): Output LVDS using initial mode 1366x768
    [ 26.340] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 26.340] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000
    [ 26.340] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 26.340] (==) RADEON(0): DPI set to (96, 96)
    [ 26.340] (II) Loading sub module "fb"
    [ 26.340] (II) LoadModule: "fb"
    [ 26.341] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 26.342] (II) Module fb: vendor="X.Org Foundation"
    [ 26.342] compiled for 1.16.0, module version = 1.0.0
    [ 26.342] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.342] (II) Loading sub module "ramdac"
    [ 26.342] (II) LoadModule: "ramdac"
    [ 26.342] (II) Module "ramdac" already built-in
    [ 26.342] (II) UnloadModule: "modesetting"
    [ 26.342] (II) Unloading modesetting
    [ 26.342] (II) UnloadModule: "fbdev"
    [ 26.342] (II) Unloading fbdev
    [ 26.342] (II) UnloadSubModule: "fbdevhw"
    [ 26.342] (II) Unloading fbdevhw
    [ 26.342] (II) UnloadModule: "vesa"
    [ 26.342] (II) Unloading vesa
    [ 26.342] (--) Depth 24 pixmap format is 32 bpp
    [ 26.342] (II) RADEON(0): [DRI2] Setup complete
    [ 26.342] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 26.342] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 26.343] (II) RADEON(0): Front buffer size: 4128K
    [ 26.343] (II) RADEON(0): VRAM usage limit set to 228153K
    [ 26.343] (==) RADEON(0): Backing store enabled
    [ 26.343] (II) RADEON(0): Direct rendering enabled
    [ 26.343] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 26.343] (II) EXA(0): Driver registered support for the following operations:
    [ 26.343] (II) Solid
    [ 26.343] (II) Copy
    [ 26.343] (II) Composite (RENDER acceleration)
    [ 26.343] (II) UploadToScreen
    [ 26.343] (II) DownloadFromScreen
    [ 26.343] (II) RADEON(0): Acceleration enabled
    [ 26.343] (==) RADEON(0): DPMS enabled
    [ 26.343] (==) RADEON(0): Silken mouse enabled
    [ 26.344] (II) RADEON(0): Set up textured video
    [ 26.344] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 26.344] (II) RADEON(0): [XvMC] Extension initialized.
    [ 26.344] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.344] (--) RandR disabled
    [ 28.774] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 28.774] (II) AIGLX: enabled GLX_ARB_create_context
    [ 28.774] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 28.774] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 28.774] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 28.774] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 28.774] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 28.774] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 28.774] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 28.776] (II) AIGLX: Loaded and initialized r600
    [ 28.776] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 28.777] (II) RADEON(0): Setting screen physical size to 361 x 203
    [ 29.030] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 29.030] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 29.030] (II) LoadModule: "evdev"
    [ 29.031] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 30.253] (II) Module evdev: vendor="X.Org Foundation"
    [ 30.253] compiled for 1.16.0, module version = 2.9.0
    [ 30.253] Module class: X.Org XInput Driver
    [ 30.253] ABI class: X.Org XInput driver, version 21.0
    [ 30.253] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.253] (**) Power Button: always reports core events
    [ 30.253] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 30.253] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.253] (--) evdev: Power Button: Found keys
    [ 30.253] (II) evdev: Power Button: Configuring as keyboard
    [ 30.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
    [ 30.254] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 30.254] (**) Option "xkb_rules" "evdev"
    [ 30.254] (**) Option "xkb_model" "pc104"
    [ 30.254] (**) Option "xkb_layout" "us"
    [ 30.302] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 30.302] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 30.302] (II) Using input driver 'evdev' for 'Video Bus'
    [ 30.302] (**) Video Bus: always reports core events
    [ 30.302] (**) evdev: Video Bus: Device: "/dev/input/event5"
    [ 30.302] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 30.302] (--) evdev: Video Bus: Found keys
    [ 30.302] (II) evdev: Video Bus: Configuring as keyboard
    [ 30.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event5"
    [ 30.302] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 30.302] (**) Option "xkb_rules" "evdev"
    [ 30.302] (**) Option "xkb_model" "pc104"
    [ 30.302] (**) Option "xkb_layout" "us"
    [ 30.304] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event6)
    [ 30.304] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
    [ 30.304] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
    [ 30.304] (**) Sony Vaio Keys: always reports core events
    [ 30.304] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event6"
    [ 30.304] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
    [ 30.304] (--) evdev: Sony Vaio Keys: Found keys
    [ 30.304] (II) evdev: Sony Vaio Keys: Configuring as keyboard
    [ 30.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/SNY5001:00/input/input7/event6"
    [ 30.304] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 8)
    [ 30.304] (**) Option "xkb_rules" "evdev"
    [ 30.304] (**) Option "xkb_model" "pc104"
    [ 30.304] (**) Option "xkb_layout" "us"
    [ 30.305] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
    [ 30.305] (II) No input driver specified, ignoring this device.
    [ 30.305] (II) This device may have been added with another device file.
    [ 30.306] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
    [ 30.306] (II) No input driver specified, ignoring this device.
    [ 30.306] (II) This device may have been added with another device file.
    [ 30.306] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 30.306] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.306] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.306] (**) Power Button: always reports core events
    [ 30.306] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 30.306] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.306] (--) evdev: Power Button: Found keys
    [ 30.307] (II) evdev: Power Button: Configuring as keyboard
    [ 30.307] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
    [ 30.307] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 30.307] (**) Option "xkb_rules" "evdev"
    [ 30.307] (**) Option "xkb_model" "pc104"
    [ 30.307] (**) Option "xkb_layout" "us"
    [ 30.307] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 30.307] (II) No input driver specified, ignoring this device.
    [ 30.307] (II) This device may have been added with another device file.
    [ 30.307] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
    [ 30.307] (II) No input driver specified, ignoring this device.
    [ 30.307] (II) This device may have been added with another device file.
    [ 30.308] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 30.308] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 30.308] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 30.308] (**) USB OPTICAL MOUSE: always reports core events
    [ 30.308] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 30.308] (--) evdev: USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4f
    [ 30.308] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 30.308] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 30.308] (--) evdev: USB OPTICAL MOUSE: Found relative axes
    [ 30.308] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
    [ 30.308] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
    [ 30.308] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
    [ 30.308] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 30.308] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:15D9:0A4F.0001/input/input2/event1"
    [ 30.308] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
    [ 30.308] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
    [ 30.308] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 30.308] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 30.308] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 30.308] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 30.309] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 30.309] (II) No input driver specified, ignoring this device.
    [ 30.309] (II) This device may have been added with another device file.
    [ 30.309] (II) config/udev: Adding input device Sony Visual Communication Camer (/dev/input/event14)
    [ 30.309] (**) Sony Visual Communication Camer: Applying InputClass "evdev keyboard catchall"
    [ 30.309] (II) Using input driver 'evdev' for 'Sony Visual Communication Camer'
    [ 30.309] (**) Sony Visual Communication Camer: always reports core events
    [ 30.309] (**) evdev: Sony Visual Communication Camer: Device: "/dev/input/event14"
    [ 30.309] (--) evdev: Sony Visual Communication Camer: Vendor 0x4f2 Product 0x3f5
    [ 30.309] (--) evdev: Sony Visual Communication Camer: Found keys
    [ 30.309] (II) evdev: Sony Visual Communication Camer: Configuring as keyboard
    [ 30.309] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/input/input15/event14"
    [ 30.309] (II) XINPUT: Adding extended input device "Sony Visual Communication Camer" (type: KEYBOARD, id 11)
    [ 30.309] (**) Option "xkb_rules" "evdev"
    [ 30.309] (**) Option "xkb_model" "pc104"
    [ 30.309] (**) Option "xkb_layout" "us"
    [ 30.310] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event9)
    [ 30.310] (II) No input driver specified, ignoring this device.
    [ 30.310] (II) This device may have been added with another device file.
    [ 30.310] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
    [ 30.310] (II) No input driver specified, ignoring this device.
    [ 30.310] (II) This device may have been added with another device file.
    [ 30.310] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 30.310] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 30.310] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 30.310] (**) AT Translated Set 2 keyboard: always reports core events
    [ 30.310] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 30.310] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 30.310] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 30.310] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 30.310] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 30.310] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 30.310] (**) Option "xkb_rules" "evdev"
    [ 30.310] (**) Option "xkb_model" "pc104"
    [ 30.310] (**) Option "xkb_layout" "us"
    [ 30.311] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event13)
    [ 30.311] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 30.311] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 30.311] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
    [ 30.311] (II) LoadModule: "synaptics"
    [ 30.311] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 30.311] (II) Module synaptics: vendor="X.Org Foundation"
    [ 30.311] compiled for 1.16.0, module version = 1.8.0
    [ 30.311] Module class: X.Org XInput Driver
    [ 30.311] ABI class: X.Org XInput driver, version 21.0
    [ 30.311] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
    [ 30.312] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 30.312] (**) Option "Device" "/dev/input/event13"
    [ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
    [ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
    [ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 30.403] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
    [ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
    [ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
    [ 30.404] (**) Option "TapButton1" "1"
    [ 30.404] (**) Option "TapButton2" "2"
    [ 30.404] (**) Option "TapButton3" "3"
    [ 30.404] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 30.404] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 30.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event13"
    [ 30.484] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
    [ 30.484] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 30.484] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
    [ 30.484] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
    [ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 30.485] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 30.486] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse3)
    [ 30.486] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 30.486] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event12)
    [ 30.486] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
    [ 30.486] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
    [ 30.486] (**) ALPS PS/2 Device: always reports core events
    [ 30.486] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event12"
    [ 30.486] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
    [ 30.486] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
    [ 30.487] (--) evdev: ALPS PS/2 Device: Found relative axes
    [ 30.487] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
    [ 30.487] (II) evdev: ALPS PS/2 Device: Configuring as mouse
    [ 30.487] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
    [ 30.487] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.487] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event12"
    [ 30.487] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 14)
    [ 30.487] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
    [ 30.487] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
    [ 30.487] (**) ALPS PS/2 Device: (accel) acceleration profile 0
    [ 30.487] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
    [ 30.487] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
    [ 30.487] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse2)
    [ 30.487] (II) No input driver specified, ignoring this device.
    [ 30.487] (II) This device may have been added with another device file.
    [ 30.488] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
    [ 30.488] (II) No input driver specified, ignoring this device.
    [ 30.488] (II) This device may have been added with another device file.
    [ 53.637] (II) AIGLX: Suspending AIGLX clients for VT switch
    Any helps would be appreciated.

  • Printer settings not working on USB network printer since update to 10.6

    I have a Canon Pixma IX4000 that is via USB connected to my server. We all print to it over ‘Printer Sharing’.
    Under 10.5 you could use any setting on a computer, print it and the server would pass the settings on.
    Since upgrading the server to 10.6 (not the server edition) I can for example no longer print in Grey.
    All other computers are still on 10.5.
    As a first step I upgrade the driver to the CUPS Printer Driver for OSX (10.26.0) ,as I figured that might be it (is also the only one for 10.6). (http://software.canon-europe.com/products/0010322.asp)
    No luck.
    Next I updated the drivers on the other machine. No luck.
    Any suggestions as to what to do to fix this?
    Ta

    Hi Uriko - this sounds like something has gone wrong with your routing. I assume that you still have Internet access and the problem is limited to a specific domain.
    Can you open your terminal program and type "nslookup URL" where you replace URL with the "specific url" you mentioned in your post.
    For example for "nslookup www.demon.net" you get
    Non-authoritative answer:
    Name: www.demon.net
    Address: 212.69.213.230
    The last line contains the IP address. Use this instead of the domain name and see whether this works. For example, instead of pointing your browser at "http://www.demon.net/about-us" you would write "http://212.69.213.230/about-us"
    Cheers
    Michael

  • Gnome-Shell: Oh no somthing has gone wrong

    currently trying to boot into the gnome3 desktop, but I get an error stating oh no something has gone wrong.
    When I uninstall gnome-shell it will boot into fallback mode just fine.
    I currently have the Nvidia drivers installed, and all of the gnome and gnome-extra packages.
    Is this a known issue with Nvidia? as KDE loads just fine however I do prefer gnome3 when I have it modified to my liking.

    Startx.log
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0.32-1-lts x86_64
    Current Operating System: Linux archbox 3.4.3-1-ARCH #1 SMP PREEMPT Mon Jun 18 08:28:29 CEST 2012 x86_64
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/arch-root ro quiet add_efi_memmap
    Build Date: 30 May 2012 07:24:13PM
    Current version of pixman: 0.26.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 21 18:22:37 2012
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    gnome-session[10094]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
    gnome-session[10094]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-H49iMa
    GNOME_KEYRING_PID=10112
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-H49iMa
    GPG_AGENT_INFO=/root/.cache/keyring-H49iMa/gpg:0:1
    SSH_AUTH_SOCK=/root/.cache/keyring-H49iMa/ssh
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-H49iMa
    GPG_AGENT_INFO=/root/.cache/keyring-H49iMa/gpg:0:1
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-H49iMa
    GPG_AGENT_INFO=/root/.cache/keyring-H49iMa/gpg:0:1
    SSH_AUTH_SOCK=/root/.cache/keyring-H49iMa/ssh
    ** (gnome-settings-daemon:10109): WARNING **: Failed to connect context: OK
    ** (gnome-settings-daemon:10109): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '10109'
    ** (gnome-settings-daemon:10109): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '10109'
    Initializing tracker-store...
    Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-store.cfg'
    Initializing tracker-miner-fs...
    Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-store.cfg'
    Starting log:
    File:'/root/.local/share/tracker/tracker-store.log'
    Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-miner-fs.cfg'
    Starting log:
    File:'/root/.local/share/tracker/tracker-miner-fs.log'
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
    Failed to play sound: Not available
    ** (nm-applet:10209): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
    ** Message: applet now removed from the notification area
    ** (nm-applet:10209): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
    ** (nm-applet:10209): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    process 10201: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
    See the manual page for dbus-uuidgen to correct this issue.
    D-Bus not built with -rdynamic so unable to print a backtrace
    gnome-session[10094]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    process 10255: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
    See the manual page for dbus-uuidgen to correct this issue.
    D-Bus not built with -rdynamic so unable to print a backtrace
    gnome-session[10094]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
    gnome-session[10094]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    gnome-session[10094]: WARNING: Unable to determine session: Unable to lookup session information for process '10094'
    gnome-session[10094]: WARNING: Unable to determine session: Unable to lookup session information for process '10094'
    (gnome-settings-daemon:10109): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:10109): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    [1340320959,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
    xinit: connection to X server lost
    waiting for X server to shut down
    Received signal:1->'Hangup'
    Received signal:1->'Hangup'
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Received signal:15->'Terminated'
    (tracker-miner-fs:10206): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    (tracker-miner-fs:10206): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    (tracker-miner-fs:10206): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Received signal:15->'Terminated'
    OK
    OK
    Server terminated successfully (0). Closing log file.
    Last edited by Rukiri (2012-06-21 23:25:49)

  • I am trying to use siri. It was working earlier. Now when I ask it to call name and number it say, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN) I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS.   What am I doing wrong or how can

    I am trying to use siri, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN)
    I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS.
    What am I doing wrong or how can I correct it.

    Siri Fix
    Turn OFF Siri
    Reset Network Settings
    Turn ON Siri
    Done
    Steps:
    Tap Settings App>General>Siri>Turn OFF
    General>Reset, near bottom>Reset Network Settings
    Tap Settings App>General>Siri>Turn ON
    Done

  • Default printer settings for HP Deskjet 882c

    All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
    Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
    What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
    Pulling my hair out here ... help would be lovely!

    You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up. 
    I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
    Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
    You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
    Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
    Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
    http://goo.gl/0WUyIe
    (*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
    After enabling the web services again the printer code area will still be blank if you are out of cyan ink. 
    Regardless the new code will display on the front panel (under web services).
    I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
    I work on behalf of HP.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Printer prints off the wrong pages - HP Deskjet 3050 all-in-one J610 series

    I have a HP Desket 3050 all-in-one J610 and I am running Windows 7 64-bit.
    I'm trying to print off some pages, first through google chrome and then through adobe reader, and the printer prints off the wrong pages. Eg, I told it to print of pages 41-64 odd only and I got all of the even pages. Now, if I try to print anything off, I get the odd page below and the settings are set to 'print all pages'. It was working fine a week ago and nothing's changed since then.
    I tend to use fast draft paper quality as these are lectures notes and not particularly important, but I have tried the normal quality paper and it does the same thing.
    Could anybody help?

    I am having the same problem as Daviemj with HP Desktop D110.  Really tired of the time it takes to use this printer. Solution?   Does anyone know of a good 3 in 1 printer?

  • Photoshop CS5 crashes when selecting print settings in print dialog box

    I work on a Mac Pro desktop with OS 10.6.4. Photoshop CS5 crashes every time I try to select "print settings" in the print dialog box. I work in a large office and our networked color printer is a Konica Minolta bizhub C451. In fact, if I hit "print" it will crash whether or not I hit "print settings" first. In CS4, there was a separate menu item that allowed you to change printer settings before going into the print dialog box. That choice is gone now, you have to select it through the print dialog box.
    This is the only way I can print out color proofs for my clients. Unfortunately, I do not have administrator rights to any printer (our office has about 100 people, only IT staff can fiddle with that). What can I do to get this solved?

    I think I have fixed it, though I'm not sure why this worked.
    System Preferences>Print & Fax. Selected the Konica Minolta printer (the B/W printer was working fine). Changed the name. Still didn't fix it. Went back selected my newly named Konica Minolta then "Open Print Queue" (like Dave said)>print settings. Change the driver to "Generic Postscript printer." I could print, but only on letter-size paper, no other options available (need tabloid). Went back to system preferences>print & fax>Konica Minolta2>open print queue>drivers then I reselected the updated printer drivers--the same one that hasn't been working.
    Now, it works.
    Thanks all for the helpful advice!

Maybe you are looking for