Print Settings not working in JDev 9.0.3??

I'm trying to print source code from JDevleoper 9.0.3.1035 and am having some problems.
Is there a way to set the page to print in Landscape? I've tried from the Page Setup and Print Menu's and neither are working for me?
Also, is there a way to print the way JDev 3.2 used to? It used to fit a lot more code on a single page?
Please Please restore JDev 3.2 printing capabilities in JDev 9?
Thanks
Bret

Works for me.
What OS/JDK etc are you using?

Similar Messages

Advanced print settings not working in cs6

Since updating to Yosemite, I cannot access the advanced print settings for my Epson 3880. I have the latest driver for the 3880. No longer can select the paper, profile, etc.

Problem Solved:
After uninstalling a previous version of Labview Runtime from the target machines and installing the newest version (which is consistent with my development environment) on the target machines, the Print Report.vi and all other report generation VI's I use seem to work fine.
Also important is to make sure that the lvrt.msi file on the development machine is up to date and consistent with the version of runtime on the target machines. This does not update automatically when upgrading to a newer version of labview (at least not when I updated from 6i to 6.02). It must be manually downloaded and inserted into the proper folder.
Thank you Ray at NI support.
Tom S.

Printer settings not working on USB network printer since update to 10.6

I have a Canon Pixma IX4000 that is via USB connected to my server. We all print to it over ‘Printer Sharing’.
Under 10.5 you could use any setting on a computer, print it and the server would pass the settings on.
Since upgrading the server to 10.6 (not the server edition) I can for example no longer print in Grey.
All other computers are still on 10.5.
As a first step I upgrade the driver to the CUPS Printer Driver for OSX (10.26.0) ,as I figured that might be it (is also the only one for 10.6). (http://software.canon-europe.com/products/0010322.asp)
No luck.
Next I updated the drivers on the other machine. No luck.
Any suggestions as to what to do to fix this?
Ta

Hi Uriko - this sounds like something has gone wrong with your routing. I assume that you still have Internet access and the problem is limited to a specific domain.
Can you open your terminal program and type "nslookup URL" where you replace URL with the "specific url" you mentioned in your post.
For example for "nslookup www.demon.net" you get
Non-authoritative answer:
Name: www.demon.net
Address: 212.69.213.230
The last line contains the IP address. Use this instead of the domain name and see whether this works. For example, instead of pointing your browser at "http://www.demon.net/about-us" you would write "http://212.69.213.230/about-us"
Cheers
Michael

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Redirected Printer is not working

Hello all,
We have a Windows Server 2012 R2 terminal server. We have set up two Lenovo thin clients to remote access this terminal server. The problem is that the redirected printer is not working on one of the thin client but works on the other one. I have made the
same settings on both of the thin clients.
The difference between these two thin clients is like following.
1. Printer: The one that is working is Canon printer and the one that is not working is HP printer.
2. They use different ISPs.
All other settings are the same. I did not find any error code from the event viewer too. The only thing that I have is this error message when I tried to print a test page. "Test page failed to print. Would you like to view the print troubleshooter
for assistance?" And when I click "Yes", it said I did not have the related service installed and I could not find the error code for this issue.
Does anyone have any ideas on this issue? Please share this.
Thank you very much.

Hi,
Thank you for posting in Windows Server Forum.
Based on your description it seems that there is issue with incompatible print driver. As you commented you can access for canon but not for HP. Please see that you have update version of HP driver is installed. If possible try to use RDS universal printer
driver and verify.
How to configure Microsoft RDS Universal Printing
Does this happen for any specific user or for all users? If this happen for any particular user then there might be issue with user profile got corrupt so need to clear user profile cache or delete it and re-login to check the result.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Black ink cartridge on photosmart printer 7250 not working

the black ink cartridge on my photosmart 7250 printer is not working. I've tried everything. I've aligned the cartridges and tried reprinting several times to see if the ink cartridge will start printing. Everything has failed. Does anyone know how to fix this problem?

You're welcome, and thank you for the updated information
I will recommend that you follow the steps within this Fixing Print Quality Problems document first. If that however does not resolve the issue and the black continues to not print, please try manually cleaning the printhead follow the steps in this 'Missing or Failed Printhead' document for your printer.
If after both of those documents the black still isn't printing properly what I suggest next will depend on if your printer is in warranty or not. If the printer is still under warranty (use this warranty checker to find out) then please call our technical support team for further assistance. If the printer is no longer under warranty, you can try the printhead soaking steps from @Bob_Headrick.
Let me know how things go for you
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Af:inputRangeSlider is not working in JDEV 11.1.1.6.0

Hi,
af:inputRangeSlider is not working in JDEV 11.1.1.6.0
tried dragging and droping it on to a test jspx page.
page stays in loading mode forever and sometimes page loads,but i am not able to change values of af:inputRangeSlider.
This seems to be a bug
on doing inspect element in the browser, i am getting following error
Uncaught ReferenceError: TrRangeValidator is not defined
please help me on this
Regards,
Shakir

Hi, just to clear things out, this issue occur in JSFF only, but in jspx, hot code is fine...
Here is my sample code where the issue occurs.
HelloWorldTaskFlow.xml
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="HelloWorldTaskFlow">
    <default-activity id="__1">viewHelloWorld</default-activity>
    <view id="viewHelloWorld">
      <page>/viewHelloWorld.jsff</page>
    </view>
    <use-page-fragments/>
</task-flow-definition>
</adfc-config>
viewHelloWorld.jsff
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core">
<af:panelBorderLayout id="pbl1">
    <f:facet name="start"/>
    <f:facet name="bottom"/>
    <f:facet name="end"/>
    <f:facet name="top"/>
    <af:panelBox text="PanelBox1" id="pb1">
      <f:facet name="toolbar"/>
      <af:outputText value="Hello World Nakurato!" id="ot1"
                     inlineStyle="font-size:x-large;"/>
    </af:panelBox>
</af:panelBorderLayout>
</jsp:root>
TestPage.jspx
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1">
      <af:form id="f1">
        <af:region value="#{bindings.HelloWorldTaskFlow1.regionModel}" id="r1"/>
        <af:inputText value="Hello"/>
      </af:form>
    </af:document>
</f:view>
</jsp:root>Any change in the jsff file does not take effect immediately when refresh. but in jspx, it works.
Any thoughts???

Printer is not working properly after I updated OS

My printer is not working after I updated my OS software. It will only print out pages as a mirror image. All the programs are not printing properly. Could really use some help fixing this issue.

What software did you update?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Have you contacted the printer manufacturer tech support? Read the printer's user manual? Your printer drivers updated to match your updated software?

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Print Settings not working in JDev 9.0.3??

Similar Messages

Maybe you are looking for