Print size changing

IPhoto keeps changing the size of the prints in my order at the checkout. I select 5(20X25) and when I check out it becomes 5(50X76), and my price goes from $5.00 to over $800 sometimes! Help Please!

I think all you need to do is "Process multiple files". Here is what I would do:
Put all my files to a folder.
Go to File>Process Multiple Files
Use File option as Process from:
check the resize image and input your desired dimension in inches. I would change the resolution setting to 300 so that it remain good enough for printing.
Please let us know if it works for you

Similar Messages

Photoshop - Preview - Printer = Size Change

Hi,
This might be more of a printer issue than Photoshop but i'm not sure... I'm trying to print off a few things in specific sizes. I've created the image in Photoshop (on Mac upstairs) and have to email/ USB it to the Macbook so i can take it to the printer. Now in Photoshop i check over and over again and the size is fine but as soon as i put it on the Macbook (without Photoshop) it prints off wrong. Is this because i'm opening it with preview? Or the printer? It's literally everytime, i make the exact size i want and check over and over and it prints off about .2 inches smaller one way and .15 smaller the other.
Can anyone help? I just cannot work out a solution and deep down i have a feeling it's the damn printer but if anyone has a fix please let me know.
Thanks,
Martyn

Are you using a "borderless" paper size? If so, the printer scales your image up slightly to make sure there are no gaps when there's a slight misalignment of the paper. If you then print to a different printer, the scaling isn't applied, and your image can be smaller.
You really need to print straight from Photoshop to the printer, or at least to the printer driver for the printer you're going to print to. Otherwise getting the paper sizes (and thus the image sizes) to match up is going to be difficult.

Why did my print size change and how can I fix it??

I have an HP Deskjet 3745, for a while now. Works great until last week, when it started printing way too large. What would normally fit on one page now fills up two pages, but the right side prints off the page. I use it for basic printing of pay stubs, some emails, web coupons, stuff like that. Using Windows XP. I have tried re-installing the driver and going into printer properties with no luck. The option to "print to fit page" is not highlighted.
Any advice??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Color and size changed when upgraded to photoshop CS5

Hi, I created a flyer in an older version of photoshop and when I upgraded to CS5 the colors and print size changed. This is particularly distirbing b/c this is a flyer/advertisment for work that was almost at the final stage. They are quite small changes, but changes that need to be corrected just the same. The colors look different (duller) on the screen and in print while the size became smaller when I print (to pdf and the printer). My print settings are the same as before as are my color settings (CMYK). I am fairly new at creating flyers in photoshop, so I am hoping this is a simple fix. Thanks.

Are you 100% certain you are using the same color profiles throughout? That print size issue might be specific to your printer driver... CS5 has a completely rewritten print handling which may not correctly cooperate with your printer driver or conversely the driver might need to be updated...
Mylenium

I can't change print sizes in certain folders!

This is a maddening problem!
I have an HP 8750, which I have no problems with.
I just got a Kodak 5100 printer. The problem is that in certain folders, if I try to change the print size of an image, say Letter to Borderless 4x6, it doesn't stick! In the upper left region, it'll show the new size I selected, but the margins, cell size, image size, etc., don't change.
This only happens in certain folders within the Library! If I move an image from a folder that has the problem into another folder that's working properly, I can resize the images in that folder. If I move it back to the "bad" folder, it won't work again. Likewise, taking an image from a good folder to a bad one makes it so I can't change the size.
This only happens with the 5100 printer. If I switch to the HP, I can set the paper size just fine, even in a "bad" folder. If I switch back to the 5100, it goes back to the size I set before.
It also only happens in Lightroom. If I export the image into Photoshop, it works fine.
I'm thinking this is a bug.

Here's a random sampling of folder names that work and don't work:
works:
E:\Digital Photos\Maria2
E:\Digital Photos\Maria and Lei\Lollipop
doesn't work:
E:\Digital Photos\Maria and Lei\Yellow
E:\Digital Photos\Maria
E:\Digital Photos\London\fig
E:\Digital Photos\London\rejects
Notice there are 2 subfolders of E:\Digital Photos\Maria and Lei\, and one works, one doesn't.
Now I haven't systematically checked every file in any particular folder, but if I find that one file in a folder works or doesn't work, every other file I randomly pick so far has also worked or not worked just like the first one.
David

Need help with Acrobat 6.0 pro; size of print is stuck @ 4.6"- can't change file print size

- can't change file print size at all. printing one size dont know how to change it (looking in print preview while in acrobat 6.0 pro..
MAC OS 10.5.8

...."page set up" from the apple menu- double duhhhh !

How do I changer the print size

How do I change the print size

I do not understand what your question is; what do you mean by "print size"?

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

FingerPrint is not listed as supported on this page: AirPrint Basics
You might check with the makers of FingerPrint.

How do I change fonts and print size on webpages?

Webpages appear in very small print and print out very small -- too small to even read. These are websites I've accessed many times for bill paying, etc., and had no problem previously. How can I change the print size to the normal size?

For font size on the screen. <br />
https://support.mozilla.com/en-US/kb/Page+Zoom
For the printed page. <br />
File > Page Setup - '''Scale'''

Changing Print Size for online printing

I have hundreds of pictures from a recent trip that I want to print to a 4x6 print. The problem is that the pictures were taken in the incorrect ratio for this print size. I know that a common solution is to crop the picture, but I do not want to do this, I want the entire picture - with a white border around it if necessary. I can get Elements 9 to do this for me for home printing from the print screen and selecting the print size that I want. However, I want to upload these photos to an online printing service (snapfish, shutterfly, etc). I have tried using their digital print size option on Snapfish, but it still crops my pictures.
So,
1. How can I get elements to save the file for me in a compatible 4x6 ratio without cropping, that I can use to upload to a printing service?
2. How can I do this in a batch process as there are over 1000 pictures that have this issue?
3. If elements can't do this, what software can?
Thanks

I think all you need to do is "Process multiple files". Here is what I would do:
Put all my files to a folder.
Go to File>Process Multiple Files
Use File option as Process from:
check the resize image and input your desired dimension in inches. I would change the resolution setting to 300 so that it remain good enough for printing.
Please let us know if it works for you

My default print size has changed to 130%. I have tried everything to change it back to 100%. Any suggestions?

My Mac Mail default print size has somehow changed from 100% to 130%. I have tried everything to change it back to 100% with no resolve. Help!

I'm using Tiger right now, but I believe Leopard is the same. Select Page Setup from the Menu. Input 100% in the Scale block. Then at the top of the Page Setup window, click the arrow on Settings & change from Page Attributes to Set As Default.
 Cheers, Tom

How to change print size on HP Envy 5530

Hi,
I just set up my new Envy 5530 printer and have begun printing. I am not seeing an option to change the print size. As I primarily will be using this printer for business shipping postage labels, I usually reduce my print copy to 85% to save ink, paper, and shipping tape. I had this option on my old HP printer- but am not seeing an option for it anywhere in the print set up window when I go to print. Help!
Thank you for your assistance, Nuit

Hi @nuit
I see you are trying to make the font smaller on your printed output. If you are using Internet Explorer you can use this document; Text is Small When Printing from Internet Explorer. If however, you are using AOL you can following these instructions from this post, 'how do i make the text larger'.
As you can see modifying the text size is going to depend on the program you are using. If you are not using Internet Explore or AOL, can you please post back with more detail. What Browser are you using and/or what programs you are printing from, and what operating system, and version do you have? Mac or Windows?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Adobe won't let me change print size

I have tried changing the print size from 8X14 to standard letter, but adobe isn't allowing me to change the size.

In the print menu under page sizing and handling, do you have Choose paper sourse by PDF page size chosen?

How do i change print size?

when printing a pdf i try to save paper by printing two sheets to a page . the result is large margins on both sides and in the middle and top and bottom with the print area reduced in size and the print so small it is very difficult to read. i can't work out how to reduce the size of the blank margins and hopefully increase the print size.
can you suggest a way around this?
gary barnes
30/9 no replies so far. does this mean there is no answer?
Message was edited by: gjbrns1

Hey,
This issue may be coming into play from a conflict of drivers. What model HP printers do you have?
Some HP printers use PCL3 and are compatible with using multiple alternate drivers. I would advise trying to use the HP Deskjet 9800 driver as a way to get past the driver conflict. For information on how to use an alternate driver please click here.
Let me know if this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

The print size Lightroom is not changing .

My Epson Stylus Pro 3880 is not getting the print size correct from the new upgrade Lightroom. Am running Window 8.1 64 bit. Help please!

I have never seen that in the years that I have been using Lightroom. But can you not simply is just the cell size of your image in the Lightroom print module to create your white border and then just print? That's what I do.
The paper size selected in 8.5 x 11". Then I adjusted the cell size to get the appropriate border. I also added a stroke border to this print.

Print size changing

Similar Messages

Maybe you are looking for