Print size errors
I have used PSE 12 since December. I set for a 8x10 paper and 8x10 print and I get 5x7. I set for 5x7 paper and 5x7 print and get 4x6. I have had no problem in the past. I can print desired size out of Picasa or Microsoft live but not PSE 12. I removed any new program that might interfere. I uninstalled and reinstalled PSE 12. Now what. Thanks for an yhelp!
Bill
In your action do you add errors to the Request or Session? It's been a while since I have worked with struts. Looking back I think we used lists to contain our error messages and displayed them in our JSP.
Similar Messages
-
HP B8850 Page Size Error Printing from Aperture 2 (or iPhoto)
I am trying to print on 13x19 (B+) size paper to an HP Photosmart Pro B8850 printer. I get this error when printing from Aperture --> "Page Size Error: Paper size selected in the print driver does not match the paper loaded in the printer IN tray."
Aperture 2.1.2
Mac OS X 10.5.6
HP Photosmart Pro B8800 Series Print Driver 2.3.1
I can set the paper size to 13x19 (B+) in the Aperture print dialog, but under the Print Settings button there is no option for paper size, only paper type. So apparently the size that the printer is expecting in the driver does not match the 13x19 that is loaded in the printer. I was able to verify this by leaving all print settings for 13x19 and loading an 8.5 x 11 sheet in the printer. It pulled the paper through and started printing, but the print was scaled to fit onto the 8.5 x 11!
So in other words, the way I'm seeing it, even though I am setting the paper size for 13x19 in Aperture's print dialog, the printer thinks it's suppose to print on 8.5 x 11.
To make matters worse, there is no Page Setup menu item in Aperture to set the paper size in the print driver directly. I would have assumed that the Aperture print dialog was "smart enough" to pass the page size parameter to the HP printer driver, but that is apparently not happening.
I spoke with HP tech support and they were surprisingly helpful. With their help I was able to print on 13x19 paper with HP's bundled software package, but I had to export my file from Aperture and import it into HP's software. Now that's a good first step which assured me there is nothing wrong with the printer itself, but obviously I purchased Aperture to use it's more elegant and supposedly streamlined interface to make my prints.
Has anyone had a similar problem? Any solutions? Suggestions? I have searched this forum, HP's support forum, DP Review, Google and not finding much. I can't believe I'm the only guy trying to print on 13 x 19 from Aperture using this printer. I suspect it's not printer specific though. Could be my system I guess. I plan on calling Apple Care depending on what type of response I get here.I don't know if this may help, but recently we had a discussion about problems with Aperture's custom paper size not working correctly:
The solution was to define a paper size outside Aperture:
In any application, for example Preview, try to print something and the print dialog comes up. At this point click on Paper size and choose Manage Custom Sizes. You can define a new paper size here. This new custom size will then appear when you go to Aperture print dialog under paper size. It solved my problems with custom paper sizes here, for some reason (a bug?) defining a custom paper size within Aperture itself did not work correctly for me. -
How do I get my HP 2645 to print 4x6 cards. It gives me a mismatch paper size error
How do I get my HP 2645 to print 4x6 cards? It gives me a mismatch paper size error.
Hi @aleek,
Thank you for visiting the HP Support Forums! I see you would like to print 4x6 cards to your HP Deskjet Ink Advantage 2645, when you attempt to print the card you get a 'Paper Mismatch' error.
I would like you to go ahead and take a look in your User Guide on page 10, here it shows how to load the media and change the printing preferences, although it shows Photos, you would use the same guidelines and steps for the Index cards, just be sure to change the media type to the correct card you are using.
Once you have the media loaded and settings set if you are still getting the error, continue here: 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
I hope this helps, if you have anymore questions please let me know.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
ERROR Message: Printer size and type paper is incorrect
ERROR Message: Printer size and type paper is incorrect. Its set for automatic detection and regular paper. I unstinstalled and reinstalled the software...and tried other settings. It wont be print just cancels.
Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Lpq outputs print jobs + error T: unknown: moving-to-paused +
Dears,
I have setup remote printing, printing from the client show the print queue at print server(T) however command does not get executed and it outputs
print jobs + error "T: unknown: moving-to-paused"
When is triggered lpstat command before printing
# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T is idle. enabled since Sun Feb 19 12:03:31 2012. available.
When is triggered lpstat command After printing
bash-3.2# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T waiting for auto-retry. available.
Failed to open the printer port. (Device busy)
T-80 [email protected] 201097 Feb 19 12:28 f iltered
T-81 [email protected] 600569 Feb 19 12:28 f
lpq
===
bash-3.2# lpq
T: unknown: moving-to-paused
Rank Owner Job File(s) Total Size
1st appltest 80 /global/u02/oracle/TEST/inst/app201097 bytes
2nd appltest 81 /global/u02/oracle/TEST/inst/app600569 bytesHi Freind,
I hope you are doing good.
Q1l:-
Are these printers really physically attached to your Ultra-* parallel port (/dev/ecpp0)?
and what device is "/dev/lp1"?
Answer:-
"/dev/lp1" which is printer "T" and "/dev/ecpp0" which is printer "Alis" are configured at OS level via "printmgr" on the same machine.
This machine hostname is "tprinter" which is a print server. It is connected physically to "CIMA6120 LINE PRINTER".
[what I meant is: what physical port is this printer attached to on the Solaris machine? is this a Ultra 5/10/60 machine? I don't recall the /dev/ecpp port
existing on any modern sun hardware]
"failed to open printer port" can mean:
Answer2:- It's is a 25 pin serial port cable connected to 25 pin parallel port of Optiplex GX100 machine. I installed solaris 10 x86 to make print server. as our CIMA6120 its not a network printer, and our company want to print reports from oracle application to this printer.
Q:-you have attached your printer to the wrong port?
Answer: it is connected to the correct port.
[again . . how do you know this or test this?]
Answer2:- it is connected at the rare panel of the machine on a 25-hole connector (bidirectional).
Q:-you have attached your printer to the right port, but are using the wrong name?
Answer: I think we could have Alias, not necessarily give the same printer name.
[what i was getting at here is that you think the printer is attached to the parallel port, but actually the cable
is actually attached to the wrong port. For example the serial port on those older machines will fit but in that case, if you configure the printer with ecpp
it's not pointing to the correct port]
Answer2:- I configured CIMA6120 with "/dev/lp1" port which was perfectly working, I print numerous pages with this configuration, Suddenly this error "moving-to-paused" occurred. as i said it is connected to the parallel port at the rare panel. Initially, I attempted and tried to configure this printer with "/dev/ecpp0" port which was not successful.
Q:-you have a bad or wrong cable?
Answer:- I have checked the cable it is good.
[how did you do the checking?]
Answer2:- I tested the cable by connecting to other printer and it printed. so no problem with the cable.
In the olden days when local printers like this was the norm, we'd do test like catting a file to the port and see if the printer lights
up or responds. Something like: cat /etc/hosts > /dev/ecpp0 (or /dev/lp1, or whatever the device is). Then observe if the printer seems to
receives anything, blinks, prints the host file. You are copying the file directly to the port outside of lp or other mechanism.
Answer2:- I agree there was some conflict among the ports internally, or some process may be running at the background, that is why though it shows the request waiting in the queue it was moving to pause for some reason. when I check the error by command "lpstat -t" it sez "device busy" in /dev/lp1" file.
Solution
============
After goggling some more I found a fix for this issue at http://fixunix.com/solaris/143011-unaccepted-printer.html
1, I tried to remove the printer from printmgr, cud not remove it.
2, try kill the entries that going to /dev/lp1 port to printer "T". could not do it
3, uncheck the default printer option via printmgr.
4, Add a new printer name "test" with /dev/ecpp0" and reproduce the issue "got the same error"
5, With the forum above it sez its a "bug" and the Bug ID: 6374608. here are the details of it:-
Synopsis: No /devices entry for line printer
http://bugs.opensolaris.org/bugdatab...bug_id=6374608
Workaround is to manually install the missing driver binding
entry, using the command:
update_drv -a -i '"lp"' ecpp
This workaround should create the missing /dev/lp* devices. And after
running it, you should find the following line in "prtconf -D" output:
lp, instance #0 (driver name: ecpp)
6, I unplug the serial cable from the printer and turnoff and replug the serial cable to the printer and turn on the printer, made sure printer is ""ONLINE".
7, I restart the Solaris machine and delete the newly created "Test" printer via printmgr.
7, I just gave the lp /etc/passwd and it printed.
Finally, I thank you for your time and suggest me your opinion on this solution please.
Regards,
MKY
Edited by: user9007339 on Feb 22, 2012 12:15 AM
Edited by: user9007339 on Feb 22, 2012 12:21 AM -
Photosmart 375 paper size error msg
My Mac has OS X 10.10.1. When I attenpt to print on my portable photosmart 375, I receive the error message "Paper is too small. Choose a larger paper size." I believe I should be choosing 4x6 size in the print dialog box on my computer, and the same in the printer's menu, since that is the size of the photo paper for this small printer. However, in the print dialog box on my computer, no photo size options (4x6, 5x7) come up, only Letter, A4, etc. As for the printer's menu, the HP manual states that I can select "paper size" choosing Menu -> Help -> Paper Size, but the list of options under Help on the printer's menu gives all that the manual states should be there EXCEPT "paper size". I have manually downloaded the latest Mac updates for hp printers. I have reset the printer to default settings. I appreciate any help you can give.
Hi @penelopem,
Welcome to the HP Forums!
I noticed that your HP Photosmart 375 is giving you a paper size error message. I am happy to help you with this issue!
Please take a look through this guide, Changing Print Settings in Mac OS X, and follow the 10.8 steps.
Otherwise, if that does not work you can probably use the printer as a standalone using the memory card slots. Troubleshooting Memory Cards.
For future reference, your printer's user guide can be found at this website, HP Photosmart 375 Compact Photo Printer User guides.
The last suggestion is to consider upgrading your printer to one that has full feature software and drivers available for Mac OS X 10.10. If you wish to do so, please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
How do we print the error logs
hi friends , i want to print the error log file of a bdc session method ,can any one sugest me a answer
Check out this Sample Program
*& Report *
*& This program is to transfer data from flat file to transaction 'FD01'
REPORT zgopi_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
* Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
* Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
* Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
* TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
* End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
* Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
* FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
* Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
* FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
* Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
* IMPORTING
* QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
* fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
* Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
* Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
* To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop -
Dunning letter print output error
Dunning Letter Generate and Custom Dunning Letter Print is not giving an output.
The message is: "The file cannot be opened because it has no pages."
Does anyone knows what might be the reason? and how to make Dunning letter work again..this is something urgent because this error is right now in the production and the users are really facing problems without the Dunning Reports
I really appreciate for the quick response
Thanks in advance!
Best,KKWe have customized Dunning Letter
It used to work perfectly sometime back ...I dont know what went wrong suddently it is giving error when tried to run Custom Dunning Letter Print gving error "The file cannot be opened because it has no pages." [/b
Not able to understand what might be wrong??
I checked data for one customer in EBS (Customers>Customer Standard>Input customer number (xxxxxx)>Button Find>Button Ok>Button Open>Tab Characteristics) Even though in EBS form I saw that Language field contains value but respective field in DB was empty.
My question when we run Dunning Letter from which level does oracle picks up the language??
Is it from Address level of the customer??
We have different environments which are clones of production. when I tried to run Dunning Letter in DEV environment which is used for building and testing which was a recent clone of production, it worked for me...not able to understand why it is not working in production??
Best, KK -
Print Size different than what is on screen
I use Elements 9 and print to an Epson 7900, when I have an image 12 1/2" x 18" the actual print size is coming out 12 1/4" x18 any suggestions, It's getting really frustrating......
Make sure the print resolution is the same as the image resolution. You can check in the Elements Editor: File à Print
In the print dialog check actual size.
-
Report Admin - Print Preview Error
In reports admin, I get the following error when I select print preview:error marshalling arguments; nested exception is; java.net.SocketException; Socket write failed.Any ideas?
Hi
Are you using <b>crystal wave</b> a third party add or the crystal report add on provided by SAP.
1.Are all your user facing same issue ?
2.Did it happen to only item or it is happening to all ?
So far looks to me ,some fields have been deleted from template. It might be the cause .
Hard to troubleshoot if it is coming from addon ...
Well try restoring a default template (if you have ) or some other layout to test the issue.
Thank you
Bishal -
In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc... -
I can't change print sizes in certain folders!
This is a maddening problem!
I have an HP 8750, which I have no problems with.
I just got a Kodak 5100 printer. The problem is that in certain folders, if I try to change the print size of an image, say Letter to Borderless 4x6, it doesn't stick! In the upper left region, it'll show the new size I selected, but the margins, cell size, image size, etc., don't change.
This only happens in certain folders within the Library! If I move an image from a folder that has the problem into another folder that's working properly, I can resize the images in that folder. If I move it back to the "bad" folder, it won't work again. Likewise, taking an image from a good folder to a bad one makes it so I can't change the size.
This only happens with the 5100 printer. If I switch to the HP, I can set the paper size just fine, even in a "bad" folder. If I switch back to the 5100, it goes back to the size I set before.
It also only happens in Lightroom. If I export the image into Photoshop, it works fine.
I'm thinking this is a bug.Here's a random sampling of folder names that work and don't work:
works:
E:\Digital Photos\Maria2
E:\Digital Photos\Maria and Lei\Lollipop
doesn't work:
E:\Digital Photos\Maria and Lei\Yellow
E:\Digital Photos\Maria
E:\Digital Photos\London\fig
E:\Digital Photos\London\rejects
Notice there are 2 subfolders of E:\Digital Photos\Maria and Lei\, and one works, one doesn't.
Now I haven't systematically checked every file in any particular folder, but if I find that one file in a folder works or doesn't work, every other file I randomly pick so far has also worked or not worked just like the first one.
David -
? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.
Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Hello, We have multiple Server 2003 Print server and are working on testing a Server 2012 print server. We have run into an issue where a PRINTER (type 4, normal) works with our Windows 7 32 bit clients, Windows 8.1 64 bit clients and the
2012 R2 server, but when trying to install to a windows 7 64 bit clients using \\SERVER\PRINTER we are getting the above message. (The printer is not offered currently in the directory).
I have been scouring the Google and Bing and have yet to find a satisfactory description that matches this issue. Nor have I found other information that resolve this issue. Like, blaming this on the spooler or DLL fixes or Reg hacks (applied
on the client side).
Specifically, we have used the native 2012 R2 drivers "Ricoh Class Driver", "HP LaserJet 4240 PCL6 Class Driver" and "Xerox Phaser 6120 Class Driver"
If I use a Type 3 driver from Xerox I am able to print from the Windows 7 64 bit client to the print device, but I was hoping to get all of my clients onto 1 driver. I understand that I might be able to use some sort of WMI filtering in our GPO
deployments for the Windows 7 64 bit clients when we go live but this sort of <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="55af8faf-887d-4ea5-9032-7c14b199df0f" id="db4a1e65-db1b-4c94-bd84-20ffc96288ce">henky</gs>.
Please, provide some knowledge. Either a solution to this issue or acknowledgement that separate driver will be required. Thank You!!!!!Hi,
Firstly, please run this "Fix It" tool (Full mode) to reset the print splooer and driver:
You experience Print Spooler error messages after installing or upgrading a Third-Party print driver
http://support.microsoft.com/kb/2793718
And then follow this guide:
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2012/A_11509-Windows-2012-server-setup-print-server-for-both-32bit-64bit-OS-clients-how-to.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
Photoshop CS can't show the actual print size & other bugs...
Although I have set in preferences my display's exact dots per inch (which is 92.72) , the rulers in mm and the real print size of the document, when I click on view print size, the document is displayed much smaller than the actual size! I have also set the printer (a virtual pdf printer) in A1 to avoid a possible scaling of the print size. So the software has all the required information, but still it can't figure out the actual print size! What do you guys think about that? I personally think that the developers couldn't figure out how to do a simple task either! Even though I work on photoshop CS occasionally, I have found too many bugs to mention. The most frustrating one, is that it suddenly stops responding to key shortcuts! Then I have to select everything from the menus or save, exit, restart and re-open the documents -now imagine being in the middle of a complicated task... Another huge annoying bug: When I "Select All" in order to copy a layer, if that layer happens to have some parts surrounded with transparency, Photoshop destroys their position and the image overall, by arbitrarily centering those parts in the pasted frame!!! Also, too often everything disappears temporarily if I pause for a second while I drag a selection rectangle etc. They haven't even made the cursor capable to move in a gray background without being invisible! So much for a "professional" expensive application! Note I have installed the available patches for this version. I know it's a bit old but as I said, I work occasionally and I don't wish to pay hundreds of euros almost each year for a new version upgrade while I'm not even happy with the previous one! BTW, on this thread editor when I hit "enter" to start a new line, the cursor goes at the beginning of the document! Now, are the Adobe's web developers drunk or what? Sorry, I cannot stand too much of stupidity right now...
function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}FrustratedToo wrote:
@Noel
- 317,632 pixels/inch ( 125,052pixels/cm )
image size x,y = 28,9 x 25,56 cm, 3614 x 3196 pixels
"Screen resolution" set to 92,719 pixels/inch
The horizontal displayed size is only about 21cm instead of 28,9.
- Windows XP Pro (version 2002) SP3 updated.
- Asus (Nvidia) 8800 GTX, driver date: 20/11/2009, driver version: 6.14.11.9562
monitor: Apple Cinema HD (aluminium) (1920x1200)
New Document preset resolutions
print resolution: 317,625 pixels/inch
screen resolution: 92,719 pixels/inch
Hm, your readings seem to imply Photoshop thinks your screen resolution is just about 128 pixels / inch. Not sure where it might be getting that number.
For what it's worth, on my Vista system I mocked up an image as you described above: An image of 3614 x 3196 pixels at 317.632 pixels per inch. My monitors display 100 ppi, and that's what I have set in the Edit - Preferences - Units & Rulers.
When I selected the zoom tool and clicked the [ Print Size ] button it zoomed to 31.48% and when I measured the display width with the ruler it came up 11-3/8", which is just about right.
HOWEVER... When I right-clicked the image with the zoom tool active, and chose Print Size it came up 8-1/4", which just happens to be about the same amount smaller than proper size that you're seeing. Sounds like a bona fide buglet in Photoshop CS.
I repeated the performance with Photoshop CS2. It works fine in CS2 - the [ Print Size ] button and right-click context menu entry both put the image up the same (proper) size.
-Noel
Maybe you are looking for
-
I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually g
-
Proforma Invoice for Free of Charge Delivery
I want to know how to create a pro forma invoice for a free of charge delivery. Currently the item category is KLN and it says that the item category is not relevant for billing. Thanks in advance Dinesh
-
Z61t Doesn't boot after upgrading hard drive
I'm upgrading the hard drive on my girlfriend's Lenovo Z61t laptop and am running in to a strange problem. The computer will not boot anymore! I cloned the old disk to the new one using acronis true image and when I insert the new disk into the lapto
-
driving me nuts..have purchased 50GB extra, received receipt that i have bought it, on my ios5 devices when i click on 'buy more storage' it indicates that my current plan is 50GB, but when looking at storage and back up it still indicates that I onl
-
MacBook Pro clock shows incorrect time
My new MacBook Pro does not display the correct time when set automatically; its an hour behind. When set it manually, incoming emails are timed an hour behind the correct time. The time zone setting is correct (UK). Can anyone help me please?