Print Size in mail always defaults to 70%

Every time I go to print an email the print size is shown as 70% and I have to change it to 100% to print at full size. I cannot find what I need to change to set the default to 100%. I do not think it is a mail issue as I keep my mail accounts on an external drive and use a sym link to access it from both my iMac and my MacBook. When using mail on the Macbook the size of the print is set to 100% as the default. Greatly appreciate what I have to tweak.
thanks
Mitch

Do you really use the icloud mail?? I removed it and it does not happens with other accounts

Similar Messages

IPad 3 Mail always defaults to iCloud inbox instead of unified inbox?

Fairly new to my iPad 3, but a long-time iOS user with an iPhone 4S. I have an iCloud email account along with my work Exchange account. iClous is the defaul email account. For some reason, any time I restart the iPad, Mail opens only in my iCloud inbox, and not in my unified inbox. Can't find any setting relating to this action. My iPhone 4S consistently opens in the unified inbox, with the exact same email accounts running the same 5.1.1 system with the same settings. A small bug, but kind of driving me nuts anyway. Am I missing a setting somewhere to fix this issue?

Do you really use the icloud mail?? I removed it and it does not happens with other accounts

I use a HP Officejet Pro 8500 A909a printer and my Safari always put 150% size as default. Wy not 100%?

I have a MacBook (the white one) and use a HP Officejet Pro 8500 A909a printer and my Safari always put 150% size as default. Wy not 100%?
When I use Firefox the default size is 100%. When I use Pages, also runs good (100%). Only in Safari, and Mail too, appears 150% as the default size.
How can I change it to 100% in both?
THOMAS

Hi,
The problem seems to lie in the installer, which has an unusual bad behaviour. The installer puts the 8500 a909a in the list of USB bootable devices. (Not good!!!)
When the printer is disconnected it isn't a problem. When the printer is connected the computer tries to boot from the printer and the computer hangs.
When I found the printer in the BIOS list of USB bootable devices I DISABLED that item in that list. Then it booted normally.
But now the BIOS takes an extra 30 seconds or so but boot up seems to be preceeding normally.
The guys on the CHAT and PHONE lines didn't even imagine the installer might be a problem so their advice was useless. They were blaming the computer. More importanly, they didn't have a way to escalate the problem. They had no capacity to respond in a flexible manner. It was like dealing with unhelpful staff in the county clerk's office.

How can I make US letter the default print size in PSE12

How can I make US letter the default print size in PSE12

Clips from JVC Everio camcorders have always had this problem with Premiere Elements (all versions). You need to select Interpret Footage.
See this FAQ from PE version 2, step 3. Like I said it has been this way with all versions:
http://www.adobeforums.com/webx/.3bc1265c
You might be able to use this tool to change the header of your MOD files so they are seen as 16:9: http://www.videohelp.com/tools/DVDPatcher
Or use this program (SDCopy) to download the video's from the cam, it will allow you to copy straight from the cam to your PC and auto renames and corrects the aspect ratio.
http://zyvid.com/smf/index.php?action=dlattach;topic=280.0;id=153

Mac 10.6.8- Paper size always defaults to 11x17

Hi- Mac 10.6.8- Paper size always defaults to 11x17 (all apps) in driver. Printer default is set to US Letter. Try to set new preset to letter, but driver always goes back to 11x17. Tried printer system reset, DL fresh driver. Printer default tray is letter. Any ideas? Thanks, Mike

kernel panic, machine check, status 4 or 5, Uncorrected error is an uncorrectable (typically double-bit error) RAM Memory Error in a Mac Pro with Error Correcting Code ECC Memory.
If you get lucky, the Address or the exact DIMM can be detected. You were not lucky in this report.
If the same DIMM is detected bad at Startup, it (and its partner) will be marked "absent", and you will see that it is missing.
If errors are being corrected before an uncorrectable error occurs, you can see those corrected errors show up:
 > About This Mac > ( More Info) > Report > Memory

My default print size has changed to 130%. I have tried everything to change it back to 100%. Any suggestions?

My Mac Mail default print size has somehow changed from 100% to 130%. I have tried everything to change it back to 100% with no resolve. Help!

I'm using Tiger right now, but I believe Leopard is the same. Select Page Setup from the Menu. Input 100% in the Scale block. Then at the top of the Page Setup window, click the arrow on Settings & change from Page Attributes to Set As Default.
 Cheers, Tom

Printing always defaults landscape in Safari only

Only in Safari, printing always defaults to landscape. My printer is Brother HL-4070CDW series CUPS. It will print portrait, but I have to tell it every time. And selecting a preset that is set up for Portrait does not change the orientation - I have to click the radio button for Portrait mode.
Other applications defaut to portrait.
Anyone else had this problem?

Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Now type of copy paste the following:
~/Library/Preferences/com.apple.print.PrintingPrefs.plist
Click Go then move the com.appl.print.PrintingPrefs.plist file to the Trash.
Restart your Mac. Turn off your printer then turn it back on.
Launch Safari and try printing ...
In the Safari print window, make sure Default Settings is selected from the presets pop up menu.
message edited by: cs

Narrative Report - default to A4 print size

Hi, I need to build a form using the narrative report and the report should fit into A4 printable size.
These are the steps I performed" First I design the form using excel and I have ensure that the form does fit into A4 print size(check via print preview). After converting the form to HTML, I copy the codes into the narrative view of the report, the content displays in the report is in the correct format/design. I save the report in CRM. However when I download and open the report in excel, the report does not fit into the A4 paper size.
Is there a way I can define the margin and report size for narrative report with HTML code?

Pease post this question on the CRM On Demand Analytics and Reports forum.

Insert Symbol, finding Pages Help Menu and Set Default Print Size

I'm having a hard time doing the following:
1. Inserting a vertical line that I used to find in Word by going to Insert > Symbol
2. Preventing Pages from defaulting to #10 Letter (which I used recently) but seems to be the default size (but not the default Pulldown page type for some weird reason). I guess I'm just not sure how this is all working.
3. Where do I go for the Program's Help Menu in Mac? I seem to go to the Help Pulldown at the end but when I type in a word I seem to get answers for Mac as a whole and not just for Pages, which is what I want.
TIA.

Hotwheels22 wrote:
I'm having a hard time doing the following:
1. Inserting a vertical line that I used to find in Word by going to Insert > Symbol
On French keyboards, we get it with option + shift + l
It would be a good idea to enter the System's Preferences Pane entitled "Language and Text"
Then trigger the newly installed menu item in the menu bar.
Yvan KOENIG (VALLAURIS, France) samedi 27 novembre 2010 22:17:35

When printing an e-mail, it prints in narrow column - not full page width!

when printing an e-mail, it prints in narrow column - not full page width!
Spacing is also erratic

check the default paper size for your printer on the printers folder in Windows.

Mail: unable to connect to my SMPT server? Also new Mail Account defaults to iMap and won't let me change to Pop?

Dear All,
I've been with the same UK internet and email provider for years and they've given me solid and reliable service. I've worked my way through the Apple Knowledgebase checklist and tests and proved that my isp/esp is working normally so the problem has to be with Mail.
I fiddled about trying to create a Mail Account on my late 2011 but-new-to-me MacBook Pro a couple of days ago and, it might be completely unrelated and simply a coincidence, but since then none of my devices, Iphone 4S, Powerbook G4, iPhone 3G, the MBPro can send email using Mail.
Whenever I try I get prompted for my password but when I enter it says it's wrong but it definitely isn't because I even changed it this morning through my isp/esp and it worked and I then changed it back again to my correct password and it works also to get into webmail that is, not via Mail.
When I run Mail\Window\Connection Doctor and check the status it shows Mail is unable to connect to server but that it can connect to the internet. I get the following message: Trying to log in to SMPT account failed. Try to verify that username and password are correct.
Now, whenever I try to create a new email account on MacBook Pro Mail keeps defaulting to iMap and wont let me change it to Pop which is what I need.
Does anyone have any ideas?

Dear All,
I'll finish off this thread in case it's of use to anyone else in the future.
I couldn't get the email pop account to recognise my sign-in even though I've been using it continually and without problem for the last several years. It's always been BT and Yahoo so it's more likely to be the fiddle about I did on my temporary, pre migration user account that caused the hiccup.
In th end I had to create another pop account which I was able to once I'd migrated my settings from my PB G4 to the MB Pro. Unfortunately this didn't merge the numerous email folders that I'd created previously in Mail but I still have them on the PB and I believe they can be transferred manually which is what I will do.
Thanks for everyone that took the time to help.
K

Is it possible to restrict printing via e-mail to one or a few domains?

Regarding HP ePrinting
Per default any emails will be printed, it is possible to restrict to certain e-mail addresses
Is it possible to restrict print per e-mail to a domain or a few domains, to get a better security and a more simple administration?
example:
e-mail addresses: [email protected], [email protected] ... etc.
Rule in HP ePrint: *@mymaildomain.com

Hi,
It is possible to restrict printing for allowed senders only,
You will have to add any email you would like to allow accessing, adding a bulk domain nake is not possible..
ePrintCenter lets you control who can e-mail print jobs to your HP product from mobile or network connected devices. Follow these steps set your ePrint-enabled product to receive print jobs from allowed senders only.
Log into your ePrintCenter account at HP ePrintCenter .
On the ePrintCenter Printers page, click ePrint Settings . The ePrint Settings window opens.
On the Allowed Senders tab, select Allowed Senders Only , and then click Save .
Type an allowed sender's email address in the dialog box, and then click Add Email . The email address is added to the Allowed Email Addresses list.
NOTE:You may specify up to 500 e-mail addresses allowed to send print jobs to your product. Your HP product ignores e-mail from addresses not on your allowed senders list.
(Optional ). To send a confirmation email to the sender after the ePrint job prints successfully, select the check box next to the email address in the Email job status column.
NOTE:To remove an email address from the Allowed Email Addresses list, click the X next to the email address in the Remove column.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked.

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

How do I set print size when printing from an IPhone or IPad?

I have an HP Deskjet 3520. Today (11/24/12) is the first time I tried to e-print with both an IPhone and IPad (both IOS 6.01). I was able to print easily from both devices. I tried a document from the Notes app on the IPhone and a photo from both the IPhone and IPad. The problem is that I had no idea what the print size would be because there were no formatting options prior to the printing. I printed on letter size paper. Do I need an app for that or is there another solution?

Airprint will just default based on the printer options, and the file type. If you had a printer with a separate photo tray it would default to 4x6 or 5x7 if it is in the photo tray and you are printing a picture, most other files would use standard letter size.
The HP ePrint app is what you want for this, it is free in the app store. This will give you options to set the paper type and size.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Print Size in mail always defaults to 70%

Similar Messages

Maybe you are looking for