Print t CDs on Canon direct from Photoshop

I'm looking for a difinitive answer to a problem that seems to have very little discussion on the web, at least that I can find: I want to print CDs on my Canon ip8500 and ip4300 printers directly from Photoshop. I've just moved over to 64-bit and Canon's CD Lable-print won't run, besides which I'd MUCH prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?! Can anyone help?

There will be no message to load the disk tray from PS. That is why I suggested he stay with the free included software.
I suspect that warning is to not try and load the disk tray while the printer is readying itself for printing.
As this is the first statement in the manual;
Placing a Printable Disc
To print onto a printable disc, place it on the disc tray supplied with the printer, then insert it into the printer.
My quote was, "Not after you send the job from PS." I have not tried to print a DVD from PS but I have done many from Easy Photo Print EX. It may not even be possible.
However, you cited a good point, better to be cautious.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Similar Messages

How to print to Canon CD printer directly from Photoshop?

I'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?! Can anyone help at all?

That is an issue of the printer driver, so you will need to contact the printer vendor to see if they have a 64bit printer driver which includes the commands to activate the CD printing function (as far as I know, this requires activating a different part of the printer hardware, to use a CD tray)
Without an option in the printer software to use that CD tray, I don't think any program will work

How can I save photos to iPhoto direct from Photoshop Elements

Does anyone know how I can save a photo direct to iPhoto after editing in PSE? Currently I save to the desktop and then "import". Its a bit of a fiddly way espectially if you are editing a number of photos direct from iPhoto. It would be nice to save them back to the relevant Event or Album.
Regards

This may help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 or later the Saving File preferences should be configured as shown:
Click to view full size
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu.
OT

Printing "Bad %%BoundingBox: comment seen!" from Photoshop CS4...

Okay, I've uninstalled and reinstalled drivers...worked until some new update or who knows. I've added my printer as an IP printer and typed BINPS, etc.—didn't work, still had error.
I'm sick of this. Somebody needs to fix this problem. I'm printing magazine proofs and get better quality printing from Photoshop than Preview. Preview is not a good enough option.
What can fix? Printing to an HP Color LaserJet 2605dn

The workaround in this thread may help:
http://discussions.apple.com/thread.jspa?threadID=1885421

How can I open an iPhoto photo directly from Photoshop Elements 6?

Hi...
I thought I read here in this forum how to open a photo that's in iPhoto ('09), directly from PSE 6. While in PSE 6, I go to File>Open>Photos(in Finder Sidebar)>then click on photo(s) in iPhoto and click on "Choose".
But when I do this, the "Choose" option remains grayed out! So I can't choose any photos directly from my iPhoto library.
What am I doing wrong, or is this just not possible to do? Or is there another way that doesn't involve first moving my photos out of iPhoto onto my desktop?
TIA, Deb

Thank you both for your responses! Unfortunately I realized I hadn't explained myself well enough and my question is still unanswered.
I do know how to set my Preferences in iPhoto to edit in an external editing software like PSE. But I like iPhoto '09 for editing so I don't want to do that.
What I use PSE 6 for is digital scrapbooking. So what I'm trying to do is figure out a way to get to my iPhoto library directly from PSE 6 while I'm working in it on a scrapbook layout.
I thought I could just go to File>Open>Media(Finder sidebar)>Photos>, which then opens my iPhoto library, and then from there choose my photos to bring into PSE. But the "Choose" button remains grayed out when I do this, even though I am in my iPhoto library and can click on photos.
I don't understand why? I've discussed this on message boards at digital scrapbooking websites, and none of the Mac users I've discussed this with, can figure it out either. We keep hoping there is an answer to this frustrating dilemma.
What we all do right now as a work around is choose our photos first from iPhoto and move them to the desktop before we even open PSE. Then we can find them easily. But we want to be able to navigate to iPhoto from within PSE and choose our photos that way. Possible??
Thanks again... Deb

Saving or Saving As Directly from Photoshop to disk AND into Lightroom catalog?

If I create a file in Photoshop without coming from Lightroom or duplicate a file in Photoshop that I opened from Lightroom, is there a way to save the new file from Photoshop to the desired directory on my local hard drive and simultaneously have it added to my Lightroom catalog? Or do I need to save the file then import the file into the catalog? I'm working with CS6.

W-W, just a slight addendum to your reply. You CAN use "Save As" from within PS after an "Edit In", and even change the file-type AND the destination folder, and the file WILL be returned to LR. The caveat is that the file-type has to be either Tiff or PSD (it doesn't have to be the same as what's set in the External Editing tab of the Preferences), it just can't be a Jpeg, and using a different folder will lose the stacking. In fact you can make multiple "save as" commands, and they'll all appear back in Lightroom provided they are Tiff or PSD (though you'll need to use a different file-name for the second or more derivatives of the same file-type if you want them all in the same folder and thus stacked with the original).
That's on Windows using LR4.3 and CS5....but I think it works that way on other versions as well. One further caveat, however, is that where an ACR mis-match occurs (as in my current setup) when using the Edit-In operation, the option to "Open Anyway" would have to be used to make use of this option....if you use "Render Using Lightroom" the Tiff/PSD is created in Lightroom and subsequent "save as" files are NOT brought back into LR.
Apologies for the complicated post, but thought it important to clarify that "Save As" can work.

Saving a file directly from Photoshop into Aperture

I am interested in saving a file while in Photoshop back in to Aperture. Proposed workflow:
Load digital file from camera into Aperture>Drag file to CS3; edit/print>save new file in same folder as the original in Aperture.
I would like to do this directly- I can save the edited file in CS3 to my desktop and then go to Aperture and import the file from my desktop but this seems arcane to me. Anyone know a direct route?
Thanks in advance- Jay

BUT, you must save the Photoshopped image using Save (not Save As using a new name or saving to a new location) so that a Photoshop file is saved back in the Aperture library. It would be nice if you could use the Apple-Shift-O to open in Photoshop, and save back as a Jpeg automatically, but we're not quite there yet.
Those full size Photoshop files will swell your library size pretty quick, which is a good thing; you'll begin to appreciate non destructive editing more fully

I can't print to my networked Canon MF8350 from my imac after Mavericks.

Hello eveyone-
I have an iMac, just upgraded to Mavericks, as well as an iBook. They are both connected to my Canon mf8350 via airport- timecapsule- ethernet. The iMac however connects to the timecapsule over an AE bridge.
Printing worked perfectly before the Mavericks upgrade.
The iBook printed just fine right out of the gate, it uses the old Canon 10.1.0 driver, and I have not touched this.
The iMac spooled its print job, then replied "communication error". I repaired permissions, restarted everything, and same result.
I removed the Canon from my printer list and tried to add it, it was not found.
Updated to Canon driver 10.2.0, printer is still not appearing in the list. Reset the printing system, still no dice. Both Canon MF background items are running according to Activity Monitor.
iBook still prints just fine.
Any ideas?
Thanks
Matt

Matthew Poor wrote:
The iMac spooled its print job, then replied "communication error". I repaired permissions, restarted everything, and same result.
Did you add the printer using Bonjour or did you select one of the IP protocols? If the latter, then you cannot use IPP. The Canon MF driver supports LPD or HP Jetdirect.
Matthew Poor wrote:
Updated to Canon driver 10.2.0, printer is still not appearing in the list.
If you mean that after you change the USE menu to "Select printer software" and the Printer Software window is empty, then try restarting your Mac. This can rebuild the printer list.
Matthew Poor wrote:
Both Canon MF background items are running according to Activity Monitor.
The new MF v10.x driver does not install or use the MF Background process. So this process is a leftover from a previous driver. I would therefore recommend you trash the older driver files and run the v10.2.0 driver installer again.
Depending on the version of driver you had installed prior to upgrading to Mavericks, the name of the folder can be different but will reside in /Library/Printers/Canon. Here you will see BJPrinter and IJScanner. Leave them alone and just remove the one or two that have MF in the name.
You then need to navigate to /Library/Launch Agents/ and trash any Canon plist file. Then restart the Mac and run the Canon MF v10.2 installer again and then see if you can add the MF8350.

Photoshop CS4 won't print on a new Canon Pixma Pro 10 - Mac Yosemite -

New Epson Pixma Pro 10. Printer works well with other applications, but just sends out blank pages when printing from Adobe Photoshop CS4. Canon suggested I use their plug, Print Studio Pro, and this worked with a file with layered images and text. However, it would not work with a file that had 3 text layers (two of which were hidden) unless I flattened the image. According to Canon, the plug in is supposed to work only with jpegs, but it did work with psd and tifs (when flattened). Any ideas on how I can get it to work directly from Photoshop.

Oletimer wrote:
Thanks for your help - I did find and download the Photoshop update to 11.0.2 and went to the Yosemite developer page you mentioned and do not see how to download the update, so I guess I will just have to wait for that to be released.
That's fine, you should do OK with Yosemite 10.10.1.
I'm glad you found the CS4 11.0.2 update. I nearly hit the roof when I read another post of yours with the "suite auto updates" nonsense after I had explained to you why one cannot rely on Adobes utterly useless auto updaters.
The hapless Adobe auto updater team in India began to get their act together only as of the CS6 updates, but they are back to their unparalleled incompetence in CC and CC2014.
In case you missed it, here's the link to the latest Canon Printer Drivers v3.1 for OS X from Apple, available to the general public, which sounds a lot newer than what you have. There's no reason for you to stick to "Print Studio 1.3.6" whatever that may be.
Canon Printer Drivers v3.1 for OS X
Let me know if you make any progress with your issue.

Can't print from Photoshop CC 2014

I very seldom need to print directly from Photoshop, but today I do. Today I discovered that I cannot print from Photoshop, because Photoshop stops working when I click 'Print'. I don't even get far enough to select a printer from the list. I get a Windows message in a little box -
"Adobe Photoshop CC 2014 has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available"
I can print from every other program on my PC, including InDesign, so it would seem that the problem is solely with Photoshop. I'm using Windows 7 64bit.
Any help or suggestions would be gratefully received.
Brian

Hi - thanks for responding! Is this any help to you?
Faulting application name: Photoshop.exe, version: 15.2.2.310, time stamp: 0x5480338c
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0x16d8
Faulting application start time: 0x01d01acda5db80f6
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 3a523491-86cc-11e4-a766-6cf0490a797e

Unable to print directly from vf03 txn after converting smartform into PDF

Dear All,
I have converted ond smartform into pdf.now when i am trying to print one document using vf03 transaction whatever button i click(ex-print preview/print) it is asking to save the pdf as local file. but i want to print that document as pdf directly from vf03 without saving it into local file.
I am giving you the code below:-
(all modification done by me are in BOLD)
     Print of a invoice by SAPscript SMART FORMS               *
REPORT zrlb_invoice5.
declaration of data
INCLUDE zrlb_invoice_data_declare5.
*INCLUDE ZRLB_INVOICE_DATA_DECLARE.
*INCLUDE rlb_invoice_data_declare.
definition of forms
INCLUDE zrlb_invoice_form015.
*INCLUDE ZRLB_INVOICE_FORM01.
*INCLUDE rlb_invoice_form01.
INCLUDE zrlb_print_forms5.
*INCLUDE ZRLB_PRINT_FORMS.
*INCLUDE rlb_print_forms.
START-OF-SELECTION.
      FORM ENTRY
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
                     CHANGING lf_retcode.
IF lf_retcode NE 0.
    return_code = 1.
ELSE.
    return_code = 0.
ENDIF.
ENDFORM.                    "ENTRY
      FORM PROCESSING                                               *
FORM processing USING proc_screen
                CHANGING cf_retcode.
DATA: lv_medium LIKE tnapr-nacha.
DATA: lwa_print_data_to_read TYPE lbbil_print_data_to_read.
DATA: lwa_bil_invoice TYPE lbbil_invoice.
DATA: lf_fm_name            TYPE rs38l_fnam.
DATA: lwa_control_param      TYPE ssfctrlop.
DATA: lwa_composer_param     TYPE ssfcompop.
DATA: lwa_recipient          TYPE swotobjid.
DATA: lwa_sender             TYPE swotobjid.
DATA: lf_formname           TYPE tdsfname.
DATA: lwa_addr_key           LIKE addr_key.
DATA: ls_dlv-land           LIKE vbrk-land1.
DATA:lv_job_output_info      TYPE ssfcrescl,
         lv_document_output_info TYPE ssfcrespd,
         lv_job_output_options   TYPE ssfcresop,
         lv_bin_filesize          TYPE i,
         gt_docs TYPE STANDARD TABLE OF docs,
         gt_lines TYPE STANDARD TABLE OF tline,
         gt_otf TYPE TABLE OF itcoo, " OTF Structure
         lv_name                  TYPE string VALUE 'INVOICE',
         lv_guiobj                TYPE REF TO cl_gui_frontend_services,
         lv_path                  TYPE string VALUE 'D:\',
         lv_fullpath              TYPE string VALUE 'D:\INVOICE',
         lv_filter                TYPE string,
         lv_uact                  TYPE i,
         lv_filename              TYPE string,
++lv_fm_name               TYPE rs38l_fnam.         +*****************************************
SmartForm from customizing table TNAPR
lf_formname = tnapr-sform.
lv_medium = tnapr-nacha.
determine print data
PERFORM set_print_data_to_read USING    lf_formname
                                 CHANGING lwa_print_data_to_read
                                 cf_retcode.
IF cf_retcode EQ 0.
select print data
    PERFORM get_data USING    lwa_print_data_to_read
                     CHANGING lwa_addr_key
                              ls_dlv-land
                              lwa_bil_invoice
                              cf_retcode.
ENDIF.
IF cf_retcode EQ 0.
    PERFORM set_print_param USING    lwa_addr_key
                                     ls_dlv-land
                            CHANGING lwa_control_param
                                     lwa_composer_param
                                     lwa_recipient
                                     lwa_sender
                                     cf_retcode.
ENDIF.
IF cf_retcode EQ 0.
determine smartform function module for invoice
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
         EXPORTING formname           = lf_formname
                variant            = ' '
                direct_call        = ' '
         IMPORTING fm_name            = lf_fm_name
         EXCEPTIONS no_form            = 1
                    no_function_module = 2
                    OTHERS             = 3.
    IF sy-subrc NE 0.
error handling
      cf_retcode = sy-subrc.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
IF cf_retcode EQ 0.
    PERFORM check_repeat.
    IF lwa_composer_param-tdcopies EQ 0.
      nast_anzal = 1.
    ELSE.
      nast_anzal = lwa_composer_param-tdcopies.
    ENDIF.
    lwa_composer_param-tdcopies = 1.
    DO nast_anzal TIMES.
In case of repetition only one time archiving
      IF sy-index GT 1 AND nast-tdarmod EQ 3.
        nast_tdarmod = nast-tdarmod.
        nast-tdarmod = 1.
        lwa_composer_param-tdarmod = 1.
      ENDIF.
      IF sy-index NE 1 AND repeat IS INITIAL.
        repeat = 'X'.
      ENDIF.
call smartform invoice
     CALL FUNCTION lf_fm_name
          EXPORTING
                     archive_index        = toa_dara
                     archive_parameters   = arc_params
                     control_parameters   = ls_control_param
                mail_appl_obj        =
                     mail_recipient       = ls_recipient
                     mail_sender          = ls_sender
                     output_options       = ls_composer_param
                     user_settings        = space
                     is_bil_invoice       = ls_bil_invoice
                     is_nast              = nast
                     is_repeat            = repeat
     importing document_output_info =
                job_output_info      =
                job_output_options   =
          EXCEPTIONS formatting_error     = 1
                     internal_error       = 2
                     send_error           = 3
                     user_canceled        = 4
                     OTHERS               = 5.
      lwa_control_param-getotf = 'X'.
      lwa_control_param-no_dialog = 'X'.
      lwa_control_param-device = 'PRINTER'.
      CALL FUNCTION lf_fm_name
        EXPORTING
         archive_index              = toa_dara
Begin of Changes 24/10/2007*
ARCHIVE_INDEX_TAB          =*
        ARCHIVE_PARAMETERS         = arc_params*
         control_parameters         = lwa_control_param
MAIL_APPL_OBJ              =*
        MAIL_RECIPIENT             = lwa_recipient*
        MAIL_SENDER                = lwa_sender*
*End of changes 04/12/2007
         output_options             = lwa_composer_param
         user_settings              = 'X'
          is_bil_invoice             = lwa_bil_invoice
          is_nast                    = nast
          is_repeat                  = repeat
          iv_medium                  = lv_medium
Begin OF Changes 04/12/2007*
IMPORTING
   document_output_info       = lv_document_output_info
   job_output_info            = lv_job_output_info
   *job_output_options         = lv_job_output_options     *
End Of Changes 04/12/2007*
EXCEPTIONS
   formatting_error           = 1
   internal_error             = 2
   send_error                 = 3
   user_canceled              = 4
   OTHERS                     = 5.
     CALL FUNCTION lf_fm_name
       EXPORTING
        ARCHIVE_INDEX              = toa_dara
ARCHIVE_INDEX_TAB          =
        ARCHIVE_PARAMETERS         = arc_params
        CONTROL_PARAMETERS         = lWA_control_param
MAIL_APPL_OBJ              =
        MAIL_RECIPIENT             = lwa_recipient
        MAIL_SENDER                = lwa_sender
        OUTPUT_OPTIONS             = lwa_composer_param
        USER_SETTINGS              = space
         IS_BIL_INVOICE             = LWA_BIL_INVOICE
         IS_NAST                    = nast
         IS_REPEAT                  = repeat
         IV_MEDIUM                  = lv_medium
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
      gt_otf[] = lv_job_output_info-otfdata[].
              CALL FUNCTION 'CONVERT_OTF'
         EXPORTING
           FORMAT                      = 'PDF'
           MAX_LINEWIDTH               = 132
        ARCHIVE_INDEX               = ' '*
        COPYNUMBER                  = 0*
        ASCII_BIDI_VIS2LOG          = ' '*
         IMPORTING
           BIN_FILESIZE                = lv_bin_filesize
        BIN_FILE                    =*
          TABLES
            otf                         = gt_otf
            lines                       = gt_lines
      EXCEPTIONS*
        ERR_MAX_LINEWIDTH           = 1*
        ERR_FORMAT                  = 2*
        ERR_CONV_NOT_POSSIBLE       = 3*
        ERR_BAD_OTF                 = 4*
        OTHERS                      = 5*
        IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
        ENDIF.
*.......................GET THE FILE NAME TO STORE.........
        CONCATENATE 'smrt' '.pdf' INTO lv_name.
      CREATE OBJECT lv_guiobj.
      CALL METHOD lv_guiobj->file_save_dialog
        EXPORTING
          default_extension = 'pdf'
          default_file_name = lv_name
          file_filter       = lv_filter
        CHANGING
          filename          = lv_name
          path              = lv_path
          fullpath          = lv_fullpath.
   user_action       = lv_uact.*
      IF lv_uact = lv_guiobj->action_cancel.
        EXIT.
      ENDIF.*
     MOVE lv_fullpath TO lv_filename.
       CALL METHOD cl_gui_frontend_services=>gui_download
         EXPORTING
          BIN_FILESIZE              = lv_bin_filesize
           filename                  = lv_fullpath
           FILETYPE                  = 'BIN'
   APPEND                    = SPACE
   WRITE_FIELD_SEPARATOR     = SPACE
   HEADER                    = '00'
   TRUNC_TRAILING_BLANKS     = SPACE
   WRITE_LF                  = 'X'
   COL_SELECT                = SPACE
   COL_SELECT_MASK           = SPACE
   DAT_MODE                  = SPACE
   CONFIRM_OVERWRITE         = SPACE
   NO_AUTH_CHECK             = SPACE
   CODEPAGE                  = SPACE
   IGNORE_CERR               = ABAP_TRUE
   REPLACEMENT               = '#'
   WRITE_BOM                 = SPACE
   TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
   FILELENGTH                =
         changing
           data_tab                  =   gt_lines.
EXCEPTIONS
   FILE_WRITE_ERROR          = 1
   NO_BATCH                  = 2
   GUI_REFUSE_FILETRANSFER   = 3
   INVALID_TYPE              = 4
   NO_AUTHORITY              = 5
   UNKNOWN_ERROR             = 6
   HEADER_NOT_ALLOWED        = 7
   SEPARATOR_NOT_ALLOWED     = 8
   FILESIZE_NOT_ALLOWED      = 9
   HEADER_TOO_LONG           = 10
   DP_ERROR_CREATE           = 11
   DP_ERROR_SEND             = 12
   DP_ERROR_WRITE            = 13
   UNKNOWN_DP_ERROR          = 14
   ACCESS_DENIED             = 15
   DP_OUT_OF_MEMORY          = 16
   DISK_FULL                 = 17
   DP_TIMEOUT                = 18
   FILE_NOT_FOUND            = 19
   DATAPROVIDER_EXCEPTION    = 20
   CONTROL_FLUSH_ERROR       = 21
   NOT_SUPPORTED_BY_GUI      = 22
   ERROR_NO_GUI              = 23
   others                    = 24
        IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
        ENDIF.
      Else.
       IF sy-subrc NE 0.*
error handling
          cf_retcode = sy-subrc.
          PERFORM protocol_update.
get SmartForm protocoll and store it in the NAST protocoll
          PERFORM add_smfrm_prot.
        ENDIF.
      ENDDO.
      lwa_composer_param-tdcopies = nast_anzal.
      IF NOT nast_tdarmod IS INITIAL.
        nast-tdarmod = nast_tdarmod.
        CLEAR nast_tdarmod.
      ENDIF.
    ENDIF.
get SmartForm protocoll and store it in the NAST protocoll
PERFORM ADD_SMFRM_PROT.
ENDFORM.                    "PROCESSING
kindly give me a sloution.

Hi,
Check for the print mode in the print options and set it as 3- print and archive .
Regards,
Ram

Printing from Photoshop CS4

I have Photshop CS4. I create a picture with a specific size in Photoshop (eample: 8.5" x 11"). I send it to the printer. In the printer box it also shows the correct print size. However when it prints it is only a small sample of the picture. An 8.5' x 11" picture from Photoshop, showing that size in the Image box and in the Photoshop print box, when sent to the printer shows at the correct size and prints it at 2-3/4" x 3-1/2". If i save the picture from Photoshop onto my desktop, then open it in Microsogt Office Picture Manager, then send it to the exact same printer, it is printed out at the correct size. I don't know why it will not print it to the correct size from Photoshop.

Printer is an HP Photosmart Premium. I believe I have the latest drivers. It
has to be something in Photoshop. When I print the same picture from any
other program it prints properly with this same printer. I just can't print
anything from Photoshop to its correct size.
Thank you for your email. Let me know if you can think of anything.
Sue DiGennaro
Ca. Portable Dance Floor Company
KEEPING YOU DANCING SINCE 1956
with the quality, reliability and durability of the products you have
trusted for over 50 years!
www.cpdfc.com

Printing (not) from Photoshop CC to Epson Stylus Pro 7800

I have a brand new iMac on OS X 10.9.2 and a brand new install of Photoshop CC and printer driver.
When I try to print an image from PS, the file is briefly seen in the print queue and then it disappears, but no printing happens. It gets as far as saying "printing page 1 of 1", but nothing else after that.
The images print fine from Preview and other types of documents also print fine, so it is just from Photoshop where the problem occurs.
Restarting PS and the printer don't make a difference; nor does re-booting the computer.
All help gratefully received!

Contact Epson - they seem to be having a LOT of driver problems on MacOS 10.9.
Photoshop sends the data to the OS, which sends the image data to the driver - and the driver is showing that it has a print job and then losing the job. So this is another Epson driver issue.

Viewinging RAW files as thumbnail images when opening from Photoshop - not working?

I have just installed Photoshop CC on my new Windows 8.1 OS computer and when I try to open one of my RAW files into Photoshop from the Photoshop 'open file' menu item I can only see file icons rather than the thumbnail pictures that are in the folders? I can view the thumbnails just fine from Bridge but not when opening directly from Photoshop? I can view all jpg's but no RAW files (both Canon and Sony RAW). I tried installing the Microsoft Camera Codec for Windows 8.1 but it won't install - error message says "not intended for this operating system" in spite of the fact that it explicitly states it is for Windows 8.1? Any ideas on what to do to be able to view the thumbnail images?
Thanks in advance.

I have just installed Photoshop CC on my new Windows 8.1 OS computer and when I try to open one of my RAW files into Photoshop from the Photoshop 'open file' menu item I can only see file icons rather than the thumbnail pictures that are in the folders? I can view the thumbnails just fine from Bridge but not when opening directly from Photoshop? I can view all jpg's but no RAW files (both Canon and Sony RAW). I tried installing the Microsoft Camera Codec for Windows 8.1 but it won't install - error message says "not intended for this operating system" in spite of the fact that it explicitly states it is for Windows 8.1? Any ideas on what to do to be able to view the thumbnail images?
Thanks in advance.

Problem Printing onto CDs from Photoshop CS5 - Canon MG6150 printer

I cannot find a solution to this problem anywhere!! I have a Canon Pixma MG6150 printer and have designed a CD/DVD label using Photoshop CS5. The proportions are all correct, when printed on paper from within Photoshop I can cut out the label and it fits my printable media perfectly.
The problem is printing directly onto the CD or DVD using the printer's CD print tray. I cannot get the alignement correct -- the label will only print halfway off the media or more, so only a small section of my label appears on the CD. I have tried various settings from within Photoshop's print options and none work.
How can I get my label design to print onto the DVD or CD? Any help is HUGELY appreciated.
I am running Mac OSX 10.6.5.

I was testing other Imacs running the same photoshop CS5.1 with the new printer drivers from canon and it prints. They are running OSX10.6.8. My new computer is running 10.9.2 and it will not print from photoshop. Is the driver not compatible with the operating system? Is there something to try other than saying the driver is at fault. Do I complain to Canon to update their driver to work? What is a work around?
Thanks,

Print t CDs on Canon direct from Photoshop

Similar Messages

Maybe you are looking for