Print text standard in several content

Hi,
I want to print in purchasing adobe form the PO condition in one page but in several content.(subform).
The po condition is saved in text standard but should be print in column. A solution is to split the text standard in several text one for each column. But it's heavy to maintain.
Do you have another solution to allow print text in several content ?
thanks a lot for your help !
Stéphane.

Hello,
the PO condition is save as a text standard like this with many lines (transaction SO10)
1 - Essential conditions / acceptance
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
2 - Progress undertaking / changes
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
3.
I want to split this text for edit in column like this in adobe form
1 - Essential conditions / acceptance    2 - Progress undertaking / changes
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF    HHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF   HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
FFFFFFFFFFFFFFFFFFFFFFFFFFFFF     HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
Without create one text by column.
Stéphane

Similar Messages

Regarding printing of standard text in scripts

Hi every one,
 I am Dinakar. I had a situation where i am printing the standard text for
 Terms & Conditions.
 my page is able to print only 15 terms pr page.
 but my problem is that few line from the last (15th) terms & condition r missing
 in the first page. from 16th terms & conditions r printing properly.but again from third page remaining terms and conditions r completely missing.
please help to complete this situation.
Thanks & Regards
Dinakar.

Hi Dinakar,
Try to keep the statments you want to display in a single page use PROTECT and ENDPROTECT.
/: PROTECT
p1 standard text1
p2 standard text2
p13: standard text15
/: ENDPROTECT
Thanks,
Sreekanth
*-- do not forget to reward if it helps you ;)

How to print a standard text of 3 pages in the script output?

Hi all,
I want to print a standard text as an include in the script output.
But the standrad text is of 3 pages conataining continuous (some terms and condtitions) text.
But while executing driver program, I am getting a STOP messgae pop-up saying 'Output is continuous or contains too many pages (>4)'.
How to get the standard text of 3 pages in the output. The standard text is to be printed at the bottom of the output.
Thanks,
Sachin

Hi ,
To display standard texts you have to create a include in your script below is the syntax for that:
INCLUDE name OBJECT name ID name PARAGRAPH name LANGUAGE   name
Include command is used to include standard text in a form.the text
should be already defined by using transaction SO10.
Here name is the name of text
ID is used to classify text e.g. SDVD (SD related text) , ST (Standard text)
OBJECT is used to specify type of object it an be TEXT , DOKU
LANGUAGE is used to specify language like EN ,if ommited than logon
language is used
PARAGRAPH is used to specify the paragraph like C
e.g. /:INCLUDE mytext OBJECT TEXT ID ST LANGUAGE EN
         Here the standard text created in SO10 with name mytext is
         included in the form in language EN (English)
Please let me know if you have still any confusion.
Thanks
Narendra Vikram Vishwakarma

Using "Pages" as my word processor I can not print a Standard page. Trying to print several copies of a single page gives me every thing parented back to back. What do I do to fix this?

Using "Pages" as my word processor I can not print a Standard page. Trying to print several copies of a single page gives me every thing parented back to back. What do I do to fix this? (Using iMac OS 10.9.1 and Canon iP4200 printer)

You have Duplexing turned on. Turn it off.
This is to do with your Printer Driver and has nothing to do with Pages.
Peter

After upgrading to Snow Leopard, Canon MX870 doesn't print text...just images

After upgrading to Snow Leopard (yes I know I'm slow to upgrade) my Canon MX870 isn't printing text. It is printing images but the quality if horrendous because it's not printing the black ink.
Here's what I've done so far
Installed the latest drivers for Snow Leopard from Canon
Cleaned the heads of the printer
Added new ink to all cartridges
Run printing tests (nozzle print patterns)...all good
Reset my printers in the Print Fax Preferences and added in the printer again
Numerous restarts
Now I'm at a loss for what else to do. Does anyone have any other suggestions?
BTW, printer is connected via USB not wireless.

OK well I can see now that all of my files are present on the hard drive (mybook) only they are not showing up in aperture. It seems that there has been some sort of communication breakdown between the two.
As I said several files are missing and or corrupt in my aperture library. I'm wondering if there is a way to rebuild the library without using the vault technique? Does this make sense to anyone?
I was able to go into finder - mybook - aperture library - show contents and see that all my raw files at least are there. Now I just need to get aperture to recognize them.
Any help is greatly appreciated!
Chris

Printing text in medruck

Hi Guys....
m working on purchase order form. want to add some text to it which is clients condition..
earlier i copied the form and created couple of windows after main window. i also decreased the length of
main window to adjust all other windows. for one line item it's fine. as soon as i create more than 1 line item for po, that line item is going to next page's main window. and the window i have added is still. what i want is: when more line item is created the content of main window should be printed continuously, and text window must move accordingly. i copied form and print prog(standard) . in the copied form's main window at the end i wrote text and given text element and protect and endprotect.
then i tried with changing print program, in that i called write_form in entry_neu form...

Hi,
I you want to print all your PO lines and then this conditions text, you can do it in different ways.
You have to resize your main window , so the po lines will get printed ok,
Then you could add your condition text into one existing element in the main window - example TOTAL_AMOUNT.
Or if you want to change you print program you can add a new element in maina window and call it from the print program.
Or if its a lot of conditions you can add them on a own page , printed as last page of you PO
Regards
Åsa Thenstedt

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

Print a JTable with several Header and Footers

Hi everybody,
my name is Lothar and I come from Germany. My english is not very well, but I hope you understand me an my problem.
I want to print a JTable, but I want to print a header with several headers and footers.
For example:
h3. Header
h5. 1. Subtitle
h5. 2. Subtitle
Table
h5. 3. Subtitle
h5. Footer
But, I do not know how I can do that. Can anybody tell me, how I can solve my problem. Please, explain for a newbie because I have learned Java since two months ;)
Here the code:
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.util.Date;
import javax.swing.*;
public class Beispiel extends JFrame implements ActionListener {
    private JTable table;
    public static void main(String[] args) {
        Beispiel tl = new Beispiel();
        tl.setVisible(true);
        tl.pack();
    public Beispiel() {
        setLayout(new BorderLayout());
        // DruckButton
        JButton print = new JButton("Print");
        add(print, BorderLayout.SOUTH);
        print.addActionListener(this);
        // Tabelle
        add(new JScrollPane(createTable()), BorderLayout.CENTER);
        // schließt das Frame
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    public JTable createTable() {
        // titel
        String[] title = new String[] { "Datum", "Von", "Bis",
                "Dauerinsgesamt", "Bemerkung" };
        // daten
        String[][] data = new String[][] { { "", "", "", "", "" },
        table = new JTable(data, title);
        table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
        return table;
    public void actionPerformed(ActionEvent e1) {
        MessageFormat header = new MessageFormat("Header");
        MessageFormat footer = new MessageFormat("Footer");
        try {
            table.print(JTable.PrintMode.FIT_WIDTH, header, footer);
        } catch (Exception e2) {
            System.err.format("Cannot print %s%n", e2.getMessage());
}

Nobody?
Can nobody solve my problem?

How can i print text message from my iPhone?

I have an iPhone 5S. How can I print text messages to save those conversations?

Did you try to copy and paste the content into another app, like notes or Mail and then send it to the printer?

Printing text using jdk 1.4...only first character in string output

I have read way too many forum postings and still can't get simple ascii to come out my printer. Please don't point me to awt printing samples. I don't want the overhead/baggage of graphics contexts when they shouldn't be needed.
If I create a printer that's a file (set to generic/ascii), then after printing and giving a filename the file contents look ok. So, this seems to be a DocFlavor issue or something.
However when I try to print to a network printer (usb attached), I only get at best a single character on my page.
The following is tracing from my print method (shows text to be printed and doc flavors supported by printer):
PrinterImpl::print(text=hello world)
image/gif; class="[B"
image/gif; class="java.io.InputStream"
image/gif; class="java.net.URL"
image/jpeg; class="[B"
image/jpeg; class="java.io.InputStream"
image/jpeg; class="java.net.URL"
image/png; class="[B"
image/png; class="java.io.InputStream"
image/png; class="java.net.URL"
application/x-java-jvm-local-objectref; class="java.awt.print.Pageable"
application/x-java-jvm-local-objectref; class="java.awt.print.Printable"
application/octet-stream; class="[B"
application/octet-stream; class="java.net.URL"
application/octet-stream; class="java.io.InputStream"
It appears, that besides copious image printing support (why PNG and not TEXT?!?!?!?) I can print Printable's from the awt api, as well as byte arrays and input streams. I wish to not use the awt printing api.
I have tried all mentioned DocFlavors regarding BYTE_ARRAY.AUTOSENSE, etc. Nothing gives me more than a single character of output.
Any ideas? I'm getting a little burnt out on this problem.
Thanks.

I cannot comment on the 2 examples you referenced, because I don't have a Postscript printer, but your own example does not work, at least under Win2K, neither on a USB nor an ASCII printer, here is why (aside from the fact that it contains 2 or 3 formal errors).
I am trying desparately to print a simple ASCII file on a USB printer under Win2K since weeks and found 2 problems, but no solution so far.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Java PrintServiceLookup.lookupPrintServices() returns nothing
=============================================================
I want to print a simple ASCII file on a USB printer under Win2K and found 2 problems. Here is the 1st one.
PrintServiceLookup.lookupPrintServices(<DocFlavor>, <AttributeSet>) returns nothing when I specify any AttributeSet:
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
I tried
aset.add(new Copies(1));
or
aset.add(MediaSizeName.ISO_A4);
I tried it with JDK 1.4.2 and with Java 6, same problem.
When I specify null for AttributeSet, I get as many services as I have printers specified in the Printers folder of the Control panel.
I have scanned quite a few contributions about this subject, and it looks like this problem has been around since years, but I haven't found a solution.
But there is a circumvention of the problem for a parallel printer (at least an HP Laserjet 4 Plus): forget lookupPrintServices, just use the default printer. It works. Here are the essential code lines to print a simple ASCII file in Win2K.
//String fileID = = args[0];
FileInputStream textStream = new FileInputStream(fileID);
PrintService defService = PrintServiceLookup.lookupDefaultPrintService();
DocFlavor myFormat = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(MediaSizeName.ISO_A4);
DocPrintJob job = defService.createPrintJob();
Doc myDoc = new SimpleDoc(textStream, myFormat, null);
try {
job.print(myDoc, aset);
} catch (PrintException pe) {
System.out.println(pe.toString());
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Cannot print on a USB printer with Java PrintService
====================================================
I want to print a simple ASCII file on a USB printer under Win2K and
found 2 problems. Here is the 2nd one.
Even though
PrintServiceLookup.lookupPrintServices(<DocFlavor>, <AttributeSet>)
returns nothing when I specify any AttributeSet, I can still print on the default printer, which I get by
PrintService defServicedefService = PrintServiceLookup.lookupDefaultPrintService();
but only on a parallel printer (HP Laserjet 4 Plus), either directly attached or over the network. When I try the very same code on a locally USB-attached printer, the printer is obviously reacting, but nothing is printed.
In case of a Lexmark 730 (an ink printer), the driver even lies, it has printed 100%,
on a Samsung CLP-510 (a color laser) the ready light flashes twice, that's all.
The file to be printed has 5 lines and a "0C"X at the end in order to force a page eject at the end.
I tried it with JDK 1.4.2 and with Java 6, same problem.
I should mention that I can print that little file out of the editor Textpad without any problem.
Edited by: eSchobbert on Jan 30, 2008 7:26 AM
Sorry I forgot to mention, that this post refers to the pretty old post of MartinHilpert of May 22, 2003 2:45 AM

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

Adobe Prints Text as Double Image

When I print pdf documents online[specifically http://content.educationdirectonline.com/course/VET010/online/vet010_088001.pdf ] the text prints out fuzzy, with a gray double image of the text right behind it, almost like a shadow. I've tried turning off the printer(Dell Photo Printer 720 with new black ink cartridge and full colored) to reset the cache, but it hasn't helped. The problem seems to be specific to Adobe, because I have printed text documents with notepad and they turn out fine.
Also, I have tried changing scaling options, text rounding options, and even tried printing the pdf as an image, none of which have effected the problem I am experiencing.
If anyone would help me solve this mystery it would be greatly appreciated! Thanks for taking the time to read through this.
-Josh Lammon

It seems to print fine for me. I would suspect that you may need to update your printer driver.
What version of Reader are you using?

To print text in sapscrpit.

I want to print text maintained in standard tcode QM03 in sapscript .
I have a y-report as driver program and want to print the text maintained for a notification number in the script. I have used "read_text". But i get only partial text.
In the debugger all the text comes in the variable but only prt of it gets printed in the actual script . Please help

Hi
Check the Window size where you are printing the Text from the Variable
from the read text you will get into the internal table lines
so format those internal table line field as per the space available for that field and do
Regards
ANji

Printing text to an NT queue using 1.4 SDK.

Does anyone have some code for printing text to an NT queue.
I am particlarly interested in the MIME type and the print attribute sets used.
The same exercise through JDK 1.2 generates a rastered image..
An example would be greatly appreciated.

This sample is for printing a gif in c:\temp\test.gif -> windows OS
But you can also print text ...
import java.io.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
public class PrintGif {
public static void main(String args[]) {
DocFlavor flavor = DocFlavor.INPUT_STREAM.GIF;
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(MediaSizeName.ISO_A4);
aset.add(new Copies(1));
PrintService[] pservices =
PrintServiceLookup.lookupPrintServices(flavor, aset);
if (pservices.length > 0) {
DocPrintJob printJob = pservices[0].createPrintJob();
Doc doc = new InputStreamDoc("c:\\temp\\test.gif", flavor);
try {
printJob.print(doc, aset);
} catch (PrintException e) {
System.err.println(e);
} else {
System.err.println("No suitable printers");
System.out.println("done.");
class InputStreamDoc implements Doc {
private String filename;
private DocFlavor docFlavor;
private InputStream stream;
public InputStreamDoc(String name, DocFlavor flavor) {
filename = name;
docFlavor = flavor;
public DocFlavor getDocFlavor() {
return docFlavor;
public DocAttributeSet getAttributes() {
return null;
public Object getPrintData() throws IOException {
return getStreamForBytes();
public java.io.Reader getReaderForText() throws java.io.IOException {
return null;
public InputStream getStreamForBytes() throws IOException {
synchronized(this) {
if (stream == null) {
stream = new FileInputStream(filename);
return stream;
}

I cant print text to Canon LBP 5100

I have Canon LBP 5100 colour laser printer connected via a network. It used to be fine but now will not print text in a document sent from my iMac or a Macbook Pro.
If the document contains text and graphics it will print the graphics only. It is not only black but all colours. The appropriated dialogue comes up in the "Print box" with the correct Quick Preview. It just wont print. If the file is text only, nothing happens at the printer - not even blank paper.
I can print correctly to another printer on the network.
However the Canon will print correctly from a Windows computer attached to the network.
I have reinstalled the printer driver on my iMac.
Any ideas or help??

I have just solved this using the "More like this" discussions. There is a new CAPT driver available from the Canon website http://support-au.canon.com.au/contents/AU/EN/0900772205.html
I downloaded and installed it. Then deleted and re-installed the printer and it works!
Thanks to all the helpful comments on the other threads.
Hope this helps somebody else.

Print text standard in several content

Similar Messages

Maybe you are looking for