Print TIN and CST Number of BPs

Hi,
In PLD when we select TIN no. of the BP (From CRD7 table fields TexId 01 And TaxId 11)then all records not show on the Print preview Show only Total .And remove the TIN number field from PLD then show all record.
WHY ?
Thanks

We also had the same problem. We followed this workaround:
Create UDF in the Marketing Documents and write a FMS to show the TIN No of the BP.
Now show the UDF in the PLD.

Similar Messages

Customer TIN and CST In PLD

Dear Members,
In PLD I want to include the customer TIN and CST No. In PLD i could not view the CRD7 Or DLN12 tables.Anyone could tell the varaible Name for the same.Please tell me the work around for this.
Jai
Edited by: JaiShankarRaman on Dec 12, 2009 8:19 AM
Edited by: JaiShankarRaman on Dec 12, 2009 8:20 AM

Dear Jai,
You have created 3 identical threads for your question. However, none of them is one the right forum. You would be better post one question on this forum:
Reporting and Printing
As for the duplicates, please close them and leave only one open.
Thanks,
Gordon

VAT TIN and CST NO

Dear Frds,
Where do we maintian VAT TIN and CST NO for a comapny? if it is at plant level, then where do we maintian that in plant?
If Possible provide Table name and field names also
Thanks in Advance.

Go to J1ID, select "Excise Indicator for Plant" and maintain the CST and VAT numbers of that plant.
Table::::::::J_1IMOCOMP
Field names are
CST No.::::::J_1ICSTNO
VAT No.::::::J_1ILSTNO
PAN No:::::::J_1IPANNO
thanks
G. Lakshmipathi

Printing Document and Comments of a BPS layout

Do you know how i can take print out of all the comments that i have in a BPS layout. Where does all these comments and documents are stored and how can i retrieve them. If it is same a Documents tab under BW, how can i get those documents for a particular layout, as i do not see the options of a Layout except to go with Queries and Info Cube.
What is the alternative solution to achieve this. All my Users want to see the comments of other users and then plan on it..
Thanks and appreciate your ideas.
Veeru

Hi Marc,
I have a requirement to print the comments entered in the planning layout to be printed in a Bex Web report.
I implemented your 'How To' paper but I still have to produce a web report to show all the comments from the planning layout.
I found on the forum about reading the DMS through a FM and writing into a table and uploading into a cube as a charcteristic.
Are there any better alternatives?
Thanks,
Jay

Check number and MICR number in SAP Script

Hi All,
I want to know how do we print MICR and Check number in the check.
I checked in SE73 - Two fonts are there with MICR.
How can we use the same in our script ?
Thanks in advace!
Sen

Hi Senthil,
refer this link may helpful to your query
[link|Re: How to print the MICR symbols in sapscript for Cheque printing;
Thanks and Regards,

Print Lay Out Design-Customer/Vendor CST Number/Tin Number

Hi friends
in Pld from where can i get -Customer/Vendor CST Number/Tin Number and all
thanks

Please check this thread:
Printing VAT NO/ TIN NO
Thanks,
Gordon

How to print TIN Number of Customr on A/R Invoice

Hi..
I need to print TIN number of the customer on A/R Invoice. pls tell me in which table i need to search it and get it printed on invoice.
Reema

Hi Reema,
Just add a database field
Table - CRD7
Column - Taxid11
If the above is not working then try by using the below FMS
Create UDF(TIN No.) and assign the below FMS Query.
SELECT T0.[TaxId11] FROM CRD7 T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
WHERE T1.[CardCode] =$[OINV.Cardcode]
OR
SELECT Max(T0.[TaxId11]) FROM CRD7 T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
WHERE T1.[CardCode] =$[OINV.Cardcode]
Assign this FMS Query in UDF(TIN No.)
Auto Refresh of Card Code and Check the Display Saved Values
Regards,
Bala
Edited by: Balakumar Viswanathan on Jan 3, 2011 1:31 PM

Invoice number and document number not printed in payment advice

Hello Gurus,
I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
other fields from regup table are displayed but above two mentioned fields are not displayed.
I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
With regards,
Vikram

Hi,
Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
Rgds
Aeda.

Need to calculate subtotal and print it on basis of dc,store and lid number

Hi Expert
I need to calculate sub total for couple of fields on the basis of DC, store and lid number. I have clculated the sub total in query level but while printing it in the report i am facing the real problem.
Please find the example:
For DC=1111, store=2222, lid no=3333
QTY rcvd qty ordered qty available REFNO
20 300 680 7859
45 258 348 4528
For DC=1111, store=2222, lid no=3334
QTY rcvd qty ordered qty available REFNO
58 78 69 1487
45 54 74 2578
i want the sum in below of completion of one set of values. but as i am calculating the sum in sql query , i put it in a group and it is appearing in the end of every line which is not my desired.
Kindly let me know how to do the grouping so that i can get it in the end of each combination of DC,store, lid no.
Thanks in advance.
Regards
Srikant

Can you send me the xml and RTF template to [email protected] ? I will take a look.
Thanks,
Bipuser

How to print a gift return label if only know the return number and order number

I have a macbook pro, it's a gift, and I want to return it. But at first time, I forgot to print the return label, now I know the order number and return number, when I click "Print return label", it appeared I need to sign in, but I don't have a apple ID

Call Apple sales and ask them. The number should be on your order receipt or look at the Contact Us link at the bottom right hand corner of this page.

Trying to find serial number and product number on my hp c4180 printer is impossible any ideas

can not find my serial number and product number on my hp c4180

Hello,
The product number and the serial number is usually at the back of the printer, below the bar code.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How to set up Print Specs and Profiles in CS5 Suite

I am no color management expert but I do want to get my printer to print the same colors as my monitor displays in PSD, AI and InD applications.
My Intel iMac and Cinema Display running OS10.5.8 are both color calibrated with Spyder 3 Elite to achieve correct color reproduction.
After days of searching and testing, this is my solution which I offer to help those new to CS5.
1. Start: PHOTOSHOP:
     Set colour settings (Edit>Color Settings) as follows:
          RGB - Adobe RGB 1998
          CMYK - US Web Coated (SWOP) v2 (This setting does not effect printer).
          Leave Grey and Spot as default 20%
     Color Management Policys:
          RGB, CMYK, Gray; all set to Preserve embedded Profiles
     Conversions Options:
          Engine - Adobe ACE
          Intent - Relative colourimetric ( my choice for AI artwork. Choose Perceptual for photos in PSD).
     Go to Save, give profile a name, and note the Conversion intent so you can create another profile for Perceptual and PSD.
     (I called mine Epson R2400 and noted the Relative Colorimetric intent).
     Finally, Go to Settings at the top of the Color Settings dialogue and select the color profile you have just named and saved. Click OK
2. Go to Bridge>Edit>Creative Suite Color Settings. Find your saved profile and select it and click Apply.
     Now AI and ID have the same colour preferences.
     Users without Bridge will have to set these items in Color Settings for each Adobe application.
3.   Photoshop>File>Print: Color Management
          Color Handling - Photoshop Manages Color
          Printer Profile - Choose the ICC Profile to suite your printer and paper stock. I used Epson canned ICC SPR2400 Premium Glossy with great results.
          Rendering Intent - Relative Colorimetric for artwork or Perceptual for photos.
4. At top of Print dialogue box, select Printer (Epson Stylus Photo 2400 in my case).
     Below, Click and open Print Settings;
     Layout - select Paper Size and number of pages (copies). Layout is one of several items in a drop down menu.
     Open the next drop down item, Color Matching. Check that he two options, Color Sync and Epson should be grayed out.
     Move to Print Settings.
          Media Type - depends on your paper. (mine is Photo Quality InkJet).
          Color - select Color or Black
          Color Settings - OFF, This turns off color management in Epson Driver leaving Photoshop in charge!
          Mode - I chose Advanced to get fine quality print. Automatic OK for general use.
      Click Save. Click Print and you should get a print matching your Monitor.
ILLUSTRATOR CS5
Bridge will ensure that Color Settings match Photoshop as 1. above. If you don’t have Bridge Go to Edit>Color Settings and specify the same as      Photoshop. Note Settings, at top of Color settings dialogue box requires the profile you created in Photoshop.
     Go to File >Print. There are 3 steps to check.
     In the window at left are headings General, Marks and Bleed, Output, Graphics, Color Management, Advanced and Summary.
     These are self explanatory. If you do not use Bridge, check Color Management as below:
1. Printer: your printer. Color Handling: Let Illustrator determine colors. Printer Profile: select your monitor RGB icc profile.
   Unlike Photoshop, do NOT use printer/paper ICC. Rendering intent: to suit your image.
2. Bottom left of Print dialogue box is Page Setup. Set your size etc.
3. Bottom Left is Printer. MOST IMPORTANT. Here are the similar setting options as PSD 4 above which require different handling.
     Select Layout, go down to Color Matching>select COLORSYNC not Epson. This ensures Apple ColorSync does color conversion.
     Profile - Automatic should appear with name of your preferred Printer/paper ICC below. ( be careful here as I have found AI sometimes finds the wrong      paper icc. Close Print and start again).
     Move down list to Print Settings - Basic:
          Page Set up - Standard; Media type - Your choice, (Photo Quality InkJet for me).
          Color - Color
          Color Settings OFF to ensure Epson printer driver does not try to manage color.
          Mode - Advanced if you want fine quality print. Automatic is OK for general use.
4. Click Print to close Printer dialogue box. Click Print to close the Print dialogue box and you should get a print to match your on screen image.
INDESIGN and General Comments.
Always select your Printer first as settings vary according to printer type.
InDesign Print set up is very similar to AI. Select Color Management at left and the Printer, Printer Profile and Rendering Intent require identical settings.
Go to bottom left, Page Setup. Specify Printer and paper size. Select Printer and the settings required are the same as AI.
If you switch between these apps there is considerable danger that the different Profile choices will trip you up. Photoshop color management requires the Printer/paper ICC, AI and InDesign require Monitor ICC. My primary error was to select my professionally scanned printer/paper ICC profile which resulted in weird colours on AI and ID. The clue that led me to choose my Monitor ICC profile instead was the ColorSync option in Color matching in AI. I hope you will find printing runs a lot smoother for you and I heartily invite better informed users than I, can add to, or qualify this post.
May the Force be with you!

Regarding print brightness at output. The Settings of monitor calibration determine white point and black point. At the time you run Spyder 3 or whatever your monitor calibrator is, the software sets a white point of your choosing. current iMacs are far too bright and prints resulting from unmodified Mac monitors will appear too dark because of the excessive screen brightness. My iMac at lowest reading is 139 candelas. To get prints which match the screen I specify 80 candelas. The Spyder software also reads ambient light in the room and makes a calculation which effects the white and black points registered for both viewing and printing. Since paper reflects a light level according to lighting conditions, we each view prints in different conditions according to illumination source. This effects also effects screen viewing so conditions determine what we see.
In simple terms, ambient light reading also modifies the software calculations for colour output. If it is too high, prints are pale, too low and prints are too dark. If the Monitor calibration has been done properly there should be no problem. The point here is to make certain your calibration process is accurate. Personally I have calibrated in a dark room at night-time and I have calibrated In a shaded room at midday. Hugely different conditions. Under both circumstances I have found the calibration has resulted in good prints. So I suspect it is user white point settings or calibration error which results in prints being too dark or too light. I understand the data used by the calibration software applies to the ambient light reading to the monitor for reading conditions and uses other color gamut data for the printing process. So printing error must surely originate with the user.
I welcome comment from more experienced people in this matter.
Cheers,

XML Publisher pdf output need each page wise start and end number

Hi ,
I have xml publisher out put in PDF. Now i need on each page header and detail part.
In header for each page it should repeat and should be print the min and maximam number of the columns.
I mean in the header start and end number of the column value for that particular page.
I did many ways but there is no luck.
Can you please suggest me how to do.
Thanks
Sampath

pls give me reply on this if any body have the answer

PO and order number not showing on shipment screen (VL03N)

We are implementing shipments in SAP. Two of the standard fields available on the variant builder in shipment display (t-code: VL03N) are PO number and Order number. However, these two fields are currently blank on the shipment display screen. Is there a configuration flag that needs to be set to pass these fields from the order to the shipment?

Hi
You are right . So far some other thread has been generated also before identifying same issue .
The option you have :
1. Administration --System initialisation -print preference >AR Invoice
However , if you want to bring it your serial number in one invoice , you probably need to customise your PLD .
2. AR invoice donot show serial number at row level because serial number is stored in different table .
Right click on AP invoice with serial number and Serial number transaction report or By menu bar Goto -->Serial Number and transaction report .
Hope this will narrow down what you are looking for
Thank you
Bishal

Printer Sharing and Windows Sharing with Windows Vista

Today I tired setting up a printer sharing network over my linksys wireless router. I turned the printer sharing on and the windows sharing on my mac. Then I launched my notebook with vista on it and installed Bonjour for Windows 1.0.3. Once the installation finished I ran the wizard and installed the shared Epson Stylus Photo 1280 printer.
Once I finished the wizard I gave the printer a go.
I tried printing a word document on my Vista machine using the new wireless set up and nothing happens the printer queue gains the document spools it and then it's gone. Then, I tried using Vistas Sharing set up. After setting up another printer icon (the same printer). When I go to print I get an error message.
Also when I try accessing my shared folder from my vista machine. I use my Username and password for the login. The computer responds that my Mac Mini's username and password is incorrect. Thus, I cannot fileshare between by Mac Mini and my Vista Laptop
What can I do to get my printer sharing and my windows sharing set up to work.
(also, my Epson Stylus Photo 1280 Printer is hooked up to my mac mini through USB).
Please respond
Thank you

Hello Joe,
I failed the login “connection to server with username and password not possible - Failure 256”
Some cures here...
http://archive.macfixitforums.com/ubbthreads.php/ubb/showflat/Number/691131/site _id/1#import
One more way to overcome stubborn printing to a Windows® printer from a Mac...
http://iharder.sourceforge.net/current/macosx/winmacprinter/
http://docs.info.apple.com/article.html?artnum=301397
iFelix...
http://www.ifelix.co.uk/tech/3020.html
http://www.ifelix.co.uk/tech/windowsxp.html
I did not succeed using the PC’s name - even though the workgroup is set correctly.
Might try Bonjour for Windows...
http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html
Which may also cure the Printer Sharing problem.
Oh. make sure Printer Sharing IS NOT set on the Mac, if it is turn it off & reboot.

Print TIN and CST Number of BPs

Similar Messages

Maybe you are looking for