Print to a DVD disck Help

Please help,
After I finish the artwork I am trying to print to a DVD disk from the illustrator.
The printer
Epson stylus photo R300
For some reason I cant figure out how to setup, I been damage 5 disks already, it print out of the center of the DVD or at the bottom, or at the right side, or at the left.
Please any advice I will appreciate
lbk

"How to create Print Areas for CD / DVD Labels" #1, 6 Jan 2008 3:08 pm

Similar Messages

Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

HP photosmart C5280 wont print on cd/dvd

HP photosmart C5280 wont print on to DVD/CD's it says this printer is not ecwipt to print dretliey onto CD/DVD's
but it has the drop down tray for it and the softwere for it ?
PLEASE HELP
runing windows 7 32bit

You're very much right. There are several different companies that make software that allows you to print directly to the CD/DVD. The link below will take you to a list of those software packages. Hope that helps.
http://goo.gl/aL7VP
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

C5280 Print to CD/DVD

I have a Photosmart C5280. It used to print directly to CD/DVD with WinXP. Now under Win7 it says to pick a printer that supports printing to CD/DVD. It says that this is not supported. Also, I don't know if this is a clue, it says that it is a C5200 series, not a C5280.
I have installed, uninstalled, unplugged, turned off and reset in every way I can think of.

When uninstalling follow this article to ensure everything is removed:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02259020&cc=us&dlc=en&lc=en&product=3204464&tmp...
This is very important as you do not want there to be any information left or registry left that may have been corrupted due to unknown reasons.
Are you reinstalling using the full featured software?
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Can't print to CD/DVD on Epson Artisan 810

I'm trying to print to the CD/DVD tray on the Epson Artisan 810. The option is greyed out (disabled) on the dialogue box, and I've found no help on the internet.
I'm connected via Wi-Fi, have installed the requisite Epson & OSX drivers, and can print and scan without issue.
Anyone have any success printing to CD/DVD? Is there something I'm missing?

Ryan Scott wrote:
Not a pretty app, but it works well enough.
I am glad that it works. I haven't tried it yet but I noticed that the program got installed when I installed my printer last week and I figured that it was the one

Alignment problems printing direct to DVD with Epson R220

I know this question isn't specifically related to iDVD but I wondered if someone could help please?
I recently bought an Epson R220 printer to print direct to DVDs created with iDVD as I know labels stuck onto DVDs are best avoided.
However, using both the bundled Epson Print CD software and 'disclabel', I find the print is about 1cm off centre. I'm really surprised by this, as I thought these machines would just work out of the box - detecting through the software where the centre of the DVD is? I've tried everything to remedy this (including the position adjustment within Print CD which allows up to 5mm fine-tuning). The problem is I need more than fine tuning - the print is way off!
I'd be interested to hear from anyone who has an R200 or R220 and might have had a similar problem as I've spoken to Windows users with the same printer, who report no such hassle.
Many thanks,
Ant
G5 2GHz dual, PowerBook G4 Mac OS X (10.4.7)

Thanks Hardy - really appreciate the links to the Epson site. I've tried using the manual settings as you suggest, and I've certainly witnessed a vast improvement. Basically, it seems that if I alter the position adjustment slightly and then opt for a manual print, the disc is centred no problem. It isn't quite up to the edge of the disc - there's about a 2mm gap, using one of the templates from the Print CD app. Have you noticed this also - or does the image print right up tight against the edge of the disc?
If I go back and opt to just 'Print' from the first menu that appears after selecting File>Print, (i.e. not using Manual to print) the image is consistently about 15mm off centre - I've tried this on a dozen tests. However, using 'Manual Print' this isn't the case. I wonder if there is a glitch here in the latest edition of EPSON Print CD (V1.4), in that you seem unable to specify 'Page Set Up'?
I've also gone back to the excellent disclabel application. Here I find that if I change the 90% default under page set up, to 100%, the disc is also aligned correctly.
Thanks very much Hardy for taking the time to work through this one with me - much appreciated.
Ant
G5 2GHz dual, PowerBook G4 Mac OS X (10.4.6)

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP!

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.

It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.

Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer...

Is it possible to print the info. from the help window. (ex. how to create a smart list)

is it possible to print the info. for the help window. (ex. how to create a smartlist... i tunes)

Yes, click the gear icon and select print.

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

Hi....is it possible to print from iPad to a HP Officejet Pro 8500 A909 printer? Thanks for any help!

Hi....is it possible to print from iPad to a HP Officejet Pro 8500 A909 printer? Thanks for any help!

The HP Officejet Pro 8500 A909 is not an AirPrint printer, if that is what you're asking. HP has proprietary apps that may be suitable for your needs.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options may exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device.

How do i install a new printer with no dvd?

how do i install a new printer with no dvd?

Hook it up and see if it works. If it is one of the more common printer brands/models, it could very well have it's drivers installed, depending on how your OS was installed. If not, you can always go to the support site for your printer and download the drivers, if necessary.
What kind of printer do you have? What OS and how was it installed?

Best practices for printing on a DVD?

I have Taiyo Yuden printable white (inkjet) DVDs and an Epson R280 - getting ready to try printing on the DVDs and was wondering any best practices?
- Print on the DVD before burning or after?
- Should I use the Epson software or is there an outside program that is better?
- Any other tips?
Thanks!
Alexa

Hi Deborah -
Welcome! As Eric says above, never put labels on your DVDs. In many cases, the adhesive can eventually cause problems and irrevocably damage the disc.
So, going with "labeling" as in putting information on the disc about what it contains, these days, a regular consumer can actually just use an inkjet printer that offers the ability (usually a special tray). I have an Epson Stylus Photo R280 (and there are other Epson models), there are several HPs and a few Canons. My printer was actually free with a digital camera from Circuit City but would have retailed for $149 at the time, so they aren't really all that expensive. Just search for printers with that function and you'll find all your choices.
Then you want to buy inkjet-printable DVDs or CDs and you're off (and there are a bunch of options there - I found it easier to order online to get a good quality, long-lasting DVD that is inkjet printable - the supplies at the local office stores were not good)! Usually your printer comes with software to do the design/print but then Old Toad has a great recommendation above.
I'm printing with a new "watershield" DVD from Taiyo Yuden (which is known for it's quality and are long-lasting, up to 75 years, not that we'll be on DVD players then!) which makes an inkjet print "unsmudgeable." There are a few other brands like that or some people use a spray on them because the downside to inkjet is that it can smudge if you touch with moist fingers or if anything wet touches it. Water shield DVDs are magical, I've found - makes a glossy print (even though inkjet) and locks in the design so it's smudgeproof. Still they are more expensive than others. I'd probably search around the forum here or other forums on DVDs and CDs if you want to look into them more.
Good luck!
Alexa
p.s. I was told that if you absolutely can't print on them, then to use a thin Sharpie with minimal writing on the DVD. I think some stores sell "DVD safe" pens but I've never been convinced that they are anything but a sharpie at a premium price - maybe someone else on here will know.

I can only print 1 page can somebody help

I can only print 1 page can somebody help
sl

I have the same problem with my HP C6380 MY8CJ880F6. For me it is +80% of what I am printing I only get 1 page and has to print the rest 1 by 1. The problem is 6 month old and I have tried almost everything except the right solution ;-}
Setup Windows 7, 64 bit (Danish). Wireless communication.
I have tried reinstalling, use HP diagnostics and a lot of other things. Diagnostics says everything is fine. Microsoft Fix It diagnostics says the same about the Windows 7 printer support functions.
My other printer a HP Designjet 111 runs perfect. When I am out of office I use other printers no problems. But the HP C6380 will in most applications especially Acrobat Reader only print 1 page at a time.
I have tried to change the printer into factory settings that sometimes do the trick for the Microsoft Office 10 products installed but not for Acrobat. Most of my documents are PDF so either i get the fixed or I will have to invest in another printer.
Any body with a solution ?
BR Erik

Print to a DVD disck Help

Similar Messages

Maybe you are looking for