Print to file problem (output size does not alter the user file measures)

Hi all,
as I'm using LR 2.2 (on Win XP) as trial version you can see that I'm a newbie to the programme which I like every day better as I step deeper into it.
I fought my way through organizing and developing my photos but now I have problems with the print module. I want to print the photo to a file (jpg) and therefore I am really happy about the new print to file option.
My understanding was, that when I choose the option of user file measures in the print to file module then all other settings (paper and printer settings as well as paper and layout settings) where sort of "overruled". Although I changed some of the other settings (for example paper setting in the printer dialog to DIN A 6) the idea was to get prints of the dimension 105.13 mm x 148.17 mm (DIN A6). This picture size is therefore my user file measures setting.
But it seems that I missed some important settings because I get pictures which are of the same size like the original photos: 43.8 cm x 61.7 cm and therefore much to big.
I would be pleased if someone could point out where my mistake is rooted.
THX!
Jens David

First of all thanks for the message.
But my problem is that neither of the two ways is working properly. Perhaps there was some kind of misunderstanding because I didn't used the official terms.
I specified the page size setting in the page setup dialog to DIN A6 AND I (tried to) override this by using the Custom file dimensions in the Print Job Section; there I used as well the DIN A6 dimensions of 105.13 mm x 148.17 mm.
Nonetheless my output file retains its original file dimensions.
I think I still need some ideas where the (or my) problem is rooted.
THX in advance.
JD

Similar Messages

Iphone 4 file size does not match the ACTUAL file size

My iphone 4 is reading 27 gigs of music as over 29 gigs of music. I don't understand why. Anyone else having an issue like this? My 3gs reads it as 27 gigs and so does my computer. I even set my 3gs to sync off a backup of my iphone 4 and it reads it as 2 less gigs. Why?

Don't know, though Apple has been known to play with the numbers a bit:
http://www.tuaw.com/2009/08/29/snow-leopard-the-new-one-gigabyte-now-slimmer-tha n-before/
Or you could have had a conversion box checked in iTunes when you loaded your IPh4
Phil

File sizes listed does not match the downloaded files

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Publish to DVD says it completes, does not write the ISO file in version 13.

When I publish to DVD and select ISO it says it completes but it does not write the ISO file in version 13.

apsteinmetz
The DVD disc which is labelled 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc which is labelled 8.5 GB/240 minutes is in reality 7.95 GB.
What version of Premiere Elements and on what computer operating system is it running? Can we assume 13/13.1 on Windows 8.1 64 bit?
What are you doing, a burn to disc DVD-VIDEO standard or widescreen on DVD disc or burn to disc AVCHD on DVD disc?
When you get to the burn dialog (and you have your disc in the burner tray), what does the Quality area of the burn dialog show for Space Required and Bitrate with and without a check mark next to "Fit Contents to Available Space"?
Or, can you do burn to Folder (4.7 GB) and/or burn to ISO Image (4.7 GB)? Are your successful burn to .iso files under 1 GB in file size?
Please quantitate "...shortening the timeline dramatically".
Thank you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Lightroom 5 does not import the GPS-files taken by the Sony A77. When i open the Bridge, there i can see them correctly. Can you help me? Thank´s a lot!

Lightroom 5 does not import the GPS-files taken by the Sony A77. When i open the Bridge, there i can see them correctly. Can you help me? Thank´s a lot!

Deleting this discussion as it is a duplicate of Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!

Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

I have a new windows 7 pc and i want to move my iTunes mediathek (Music, movies) to it. by using an external driver (Hd.). But On the new pc iTunes does Not integrales the Media files.

I have a new windows 7 pc and i want to move my iTunes mediathek (Music, movies) to it. by using an external driver (Hd.). But On the new pc iTunes does Not integrales the Media files.

Copy the entire /Music/iTunes/ folder from old computer to /Music/ on new computer.
Launch iTunes.
That is all you need to do.

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

Hi,
CS6
Van: R_Kelly [email protected]
Verzonden: maandag 16 september 2013 18:42
Aan: Hans van Sloten
Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
created by R_Kelly <http://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Somehow my calender was erased. How do I restore it? I have time machine. Fortunately it was synched with Outlook, so I still have it there. But Ical does not recognize the Outlook file. Is there a way to restore from Outlook? resi

Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.

Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
God bless. Thanks again.

JNI generated header file does not match the class file

We have had a JNI project for many years and all has been fine. Within our libraries we have several classes that have inner enum classes.
Recently we have moved to JDK1.7. Up to now when JNI generated the methods where the signature used the inner enum class, and it was an oveloaded method, we would get something like the following as the signature:
Java_PackageName_ClassName_methodName_OuterClass_00024InnerEnum_2
And the class file result of the build would look like the following:
methodName(OuterClass$InnerEnum)
Since we have moved to JDK 1.7 the header file looks like the following:
Java_PackageName_ClassName_methodName_OuterClasss_InnerEnum_2
The class file is still the same, and because of that when we run the program we get an UnsatisfiedLinkError. I understand that this error is because the VM cannot find the implementation. So why JDK 1.7 generates a header file that does not match the class file?
Thank you in advance.

I don't have 1.6 to verify but your statements about what is generated for 1.7 for the header appear correct.
The 000024 represents the '$' and for 1.7 the inner class is still named using '$'. So for example after compiling in 1.7 the inner class file is named the following...
MyClass$InnerEnum.class
So a one to one conversion should have kept the 000024 (presuming it does in fact do it that way in 1.6.)
You might want to look at the release notes for 1.7.
If you need a solution you could add a post javah step that renames the file.

Print to file problem (output size does not alter the user file measures)

Similar Messages

Maybe you are looking for