Print to Laserjet 1020 hosted by Windows 7 64 bit via network from Windows 7 32 bit

I am trying to print from Win 7 32 bit to a HP 1020 connected to a 64 bit Win 7. (the 64 bit is a new computer).
I have tried all the suggestions posted:
Downloaded updated 32 bit driver to the 32 bit PC.
I have also assigned the printer to a port on the computer.
I enabled on the 64 bit printing from a x86 computer.
Nothing helps.
When I print, the job gets stuck on the computer connected to the printer. When i release the spool, it then prints the page.
I was able to print when all the PCs were 32 bit (and XP before that).

Hi NDK
The host base driver is the same for both Win 7 32 & 64 bit operating systems.
Win 7 32-bit:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-88660-1&cc=us&dlc=en&lc=en&...=
Win 7 64-Bit:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101596-1&cc=us&dlc=en&lc=en...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

Laserjet 1020 install on windows 7 machine

I am trying to install a laserjet 1020 on a windows home machine. i get a message saying waiting for PnP to finish installing driver. This is where it hangs. thanks

PnP tells the printer device drivers where and how to install the 1020.
Did you plug in the 1020 b4 running the Win7 install software?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Printer HP LASERJET 1020 not working in WINDOWS 7 RDP but WORKING IN XP

Our clients connect to server 2008r2 through rdp when they try to print with hp laserjet 1020 printer Its shows failed to print would you like to view the print troubleshooter for assistance. This error only to windows 7 clients,.
Windows xp client can print without any problem.
Hope i will get assist from these page.

Hi Suresh,
Thank you for your posting in Windows Server Forum.
Which version of RDP client you are using for your environment?
I recommend you to use RDP 8.0 or 8.1 for windows 7. Please check that spooler service is started on client side also. In addition you can try to install Hotfix available to resolve printing issue. Please try to download and install below hotfix hope your issue
can be resolved.
Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
http://support.microsoft.com/default.aspx?scid=kb;en-US;2647753
Apart from that if you are using RD Easy print then you can troubleshoot with below link.
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks,
Dharmesh

I cant print hp laserjet 1020 plus in domain conttroler system

hi
i have problem with hp laserjet 1020 plus printer i cant got print in doamin network.

Hi dara_sham,
Follow the steps in the document at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381599&tmp_task=useCategory&cc=us&dlc=en&lang...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Can't access a PSC 1315xi that's connected to a Windows 7 computer via network from my Vista laptop.

When I replace my Vista desktop with a new one running Win 7, I no longer can print to my PSC 1315xi all-in-one from my Vista laptop. I have downloaded the driver onto my desktop but can't see the printer on it from my laptop.
Can this be done? the printer/scanner/copier works fine on the desktop via USB but not over my network from the laptop.

WayneSol wrote:
When I replace my Vista desktop with a new one running Win 7, I no longer can print to my PSC 1315xi all-in-one from my Vista laptop. I have downloaded the driver onto my desktop but can't see the printer on it from my laptop.
Can this be done? the printer/scanner/copier works fine on the desktop via USB but not over my network from the laptop.

Print to LaserJet 3150 Shared by Windows XP Pro

I have an older, but servicable LaserJet 3150 hooked to my Windows XP Pro desktop at work.
A long time ago, I set it up to share with OS X by creatign a virtual printer using GhostScript and some other queuing utility - this made is look like a PostScript Laserwriter. Worked great!
Alas, as common with Windows, the system decided to blow iteself away, and had to be rebuilt. I did not keep recipee, and cannot find it online.
Has anybody seen it? The problem is that the LaserJet 3150 is a impure PCL printer using its own format.
Thanks,
-- Harald

http://iharder.sourceforge.net/macosx/winmacprinter/

Printing to a printer connected to an iMac via network from Vista PC

I have a Canon PIXMA MP610 connected to a new iMac (Leopard) via USB it works fine on the iMac. I shared the device on the iMac as instructed in the Apple help section. On my network, I have 2 Dell laptops running Vista Ultimate. I installed the lasted drivers on the Dells and was able to find the shared printer on the network and successfully add it to both Dell PCs. The pc's can see status (i.e. ready, idle, etc..) and even ink and paper status. When I try to print to the printer, the document spools in the queue, but then just disappears and nothing comes out of the printer.
Please help!

I just learned that Mac's printer is shown to network as a *PostScript printer* regardless of its type. The guide http://www.ifelix.co.uk/tech/3012.html (for Windows XP) tells how you have to define your printer's name. But you must select a driver for a Apple printer (b/w of color matching yours), don't use the printer's native driver (unless it is a PS printer).
There is no Apple drivers available in my Vista Premium. But fortunately PostScript is well standardized and you can select from any of PS-drivers. i took +HP Color LaserJet 4700 PS+ and now my +Epson Stylus Photo 870+ works fine!

Airport Express Base Station and HP Laserjet 1020 printer connected

Dear all,
I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

Hallo everybody,
Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
Conclusion:
1. The USB cable must be plugged into the airport express before turning on anything.
2. Turn on the printer first.
3. Turn on the airport express and the computer.
4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
5. Disconnect the USB cable from the airport express and connect it to the PC directly.
6. Print a document.
7. Disconnect the cable and reconnect it to the airport express.
8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

Windows 8 OS is not supporting hp laserjet 1020 drivers

hello sir,
I am using windows 8 operating system but my printer is not supporting and unable to print any thing.
Is there any updates or upgrade facility available? Is there any other drivers for windows8?
can u please give me a suggestion and its urgent for me.
Thank you,

sorry, but this print driver (Laserjet 1020) is not yet supported on Windows 8
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

Problems printing w2k8 + terminal services + hp laserjet 1020 printer

Hi!
I can not print from terminal services (w2k8 server r2) with a hp laserjet 1020 .document remains in the local print queue but does not end,only in RDP. I've
searched through the HP's website but they know nothing about it.I have another server with the same features and this all works well and I've checked all the settings and are equal, only a difference:
when printing from the server with problems in the local print queue information shows the port where it is printed in this case is usb but when printing from the server to work properly, the print queue nothing is displayed in the column port.
windows server 2008 r2 , 32 bit(terminal services) ,(isn't a dc server)
windows 7 bussines 32 bit (local pc)
printer:hp laserjet 1020
please help me!!!!!
Thanks in advanced

Hi,
Firstly, have you check the printer spooler service is started?
Check the latest printer driver is installed on server?
Apart from this you can check basic printer redirection requirements must be there for successful printer redirection.
- RDP 7.0 or above
- .Net Framework 3.5 or above
- If you connect over RD Gateway, ensure that the policy that disables printer redirection is turned off.
- GPO setting "Use Print printer driver first” must be set to “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print.
More information.
Printer redirection not working
Apart there is update rollup for printing issue for Windows 7 and Server 2008 R2, you can try to download and install might this help to resolve your issue.
Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
Hope it helps!
Thanks,
Dharmesh

HP Laserjet 1020 problem with double-side printing

Hi, everyone!
I have a problem with my printer HP laserjet 1020. From the community I know that there is no driver for 1020, but there is for 1022 (http://support.apple.com/kb/DL907). I installed it and everything was fine until I tried to print 2-sided page... It appears 2-sided option disappeared and I don't know how to fix this...
Can anyone help, please?
Thank you for looking.

AMW122,
The part in the photograph appears to be part of the fuser assembly. If it is part of the fuser assembly, I would recommend you replace the fuser. An internet search on "LaserJet 3300 fuser" found several links.
From what I can see, it appears that the fuser sleeve is damaged which will continue to worsen.
If it is not the fuser, can you post another photograph further away so that we can see the location on the printer where it is located, etc...
Kaz
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Very light print with LaserJet Pro CM1415

Core issue: Almost invisible printing
Product: LaserJet Pro CM1415fnw
OS: Windows 8.1 64-bit (same issue with Windows 7 and Windows Vista Ultimate - all 64-bit)
Replaced all 4 cartridges with brand hew HP cartridges even though old HP ones were not depleated.
Updated all drivers and printer firmware to most current versions.
Ran all HP diagnostics and troubleshooting including cleaning (twice).
Tried adjusting print desity to darker -- no effect at all.
Total pages printed since it was new - 2222
Even tried printing black only with no effect.
Supply status shows all cartidges registered and 100% full.
I read the other forum messages on the same printer and subject and it appears that the problem is very common, and I never was able to find a solution that worked.
This appears to be a problem with the printer itself -- possibly some sort of internal defect. Amusing that it seems to have happened about coincidental with expiration of warranty.
Is there a solution?

Hi @TereP,
I see that you are having issues with the print being very light. You already replaced the toners with Genuine HP Toners and still have the same results. I would really like to be able to help you resolve this issue today.
It may be a issue with the fuser or another hardware issue causing this.
I have provided some steps to see if we can determine what the issue is.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Run a cleaning and calibrate the printer:
On the printer touch the Setup icon, System Setup, Print Quality menu, and select the Color Calibration item.
Select the Calibrate Now option.
Then go to the Setup icon, Service Menu, Cleaning Page.
Print a Diagnostics Page to see if it is a hardware or software issue.
Go to Setup, Reports, Diagnostics Page.
Here is a picture of the Diagnostics Page.
Let me know if there are any issues with the colors printed, the alignment of the L's at the bottom corners of the page and if there are any smudges or blots on the page.
Print the Print Quality Page, it will help determine which toners are causing this issue.
1. On the product control panel, open the Reports menu.
2. Select the Print Quality Page item to print it.
● If dots or streaks appear in only one of the groups, replace the print cartridge that correlates with
that group.
● If dots appear in more than one group, print a cleaning page. If this does not solve the problem,
determine if the dots are always the same color; for example, if magenta dots appear in all five
color bands. If the dots are all the same color, replace that print cartridge.
I have provided a document to go through the steps to see if this will help resolve this issue.
Resolving Print Quality Issues.
The diagnostics and the print quality page will help with determining this issue.
Let me know the results please. You may include a screen shot if you like. Visual is always better for determining the issue.
How is the printer connected? (USB/Ethernet/Wireless)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 1020 connected to Airport Express - Can't Print from Windows XP

Hi,
I have been using Airport Express for almost a year now, and it works fine with my old LaserJet 1200 connected to it, meaning that BOTH my ThinkPad(WinXP) and PowerBook(OSX 10.3) prints off the printer nicely. Last week I bought a LaserJet 1020 to replace the old printer. Now I can only print off my Mac, and not the ThinkPad.
Here are some additional information:
- Airport Express has been updated with latest updates.
- Using newest printer driver available from the HP website.
- New printer works when connected to ThinkPad via USB.
- New printer works when connected to Airport Express and printing performed using my PowerBook.
Therefore, My conclusion is that Airport Express and Printer is working just fine, and that it's just my ThinkPad not being configured correctly. (Although at the back of my head I am guessing that just MAYBE it's the Airport Express not accepting a different printer)
This is what I did to install the printer from my ThinkPad to work with Airport Express (which is not working):
1. Add a printer
2. Local printer attached to computer (no auto detect)
3. Selected existing TCP/IP port 10.0.1.1
4. Selected my new printer driver
5. Finish
I also tried a few things like:
- Deleting the TCP/IP port and creating it again before installing the new printer again.
- Off both airport express and printer and on again after about 10sec.Airport was on first, and after the LED turn green, printer was turned on and USB plugged into airport.
- Restarting my ThinkPad.
I have tried everything that I can think of, and nothing worked... hence this posting to get professional help.

Hi,
You might want to download and install bonjour for windows to your Thinkpad it is how I got my roomates XP laptop to print on AX.

HP LaserJet 1020 Printer - booklet printing (Operating System Windows XP)

We were using above option earlier in HP Laserjet 1020 Printer. Presently, the printer is not responding to this option. We tried to reinstall several times using the driver software supplied with the printer but this particular option did not work. Rest of the normal functions of the printer is performing satisfactorily. Please advice us how to sort out this issue.
More Details:Earlier, after complete printing the pages to be printed on one side, the printer will pause and the button will show red and blink. Also, while pausing, the monitor used to display "how to keep the bunch of papers already printd to be kept in the lower tray for printing on the backside of the sheets". Presently, the first phase is happening, ie., printing the bunch of papers on one side and the printer pasuses. Afterwards, the blinking of the red light, display on the monitor depicting how to keep the sheets in the lower tray for continuing the balance of the print is not appearing. Since there is no indication or response we are forced to "end task", and come out of the situation.
With regards and best wishes
Rajagopal A

Hi
You can try running the following utility at the link below. It sounds like a network issue since you are able to print fine when you give the users admin rights.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02726548&cc=us&dlc=en&lang=en&lc=en&product=439...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Duplex printing. No dialog window on the HP LaserJet 1020

I'm running WinXP Pro, but I think it doesn't matter so much, because I've used duplex printing on it for a year without any problems. But now the dialog window, which must appear while using duplex printing is gone
When the Print on both sides instruction dialog window appears on the PC's monitor, follow the instructions, says the Duplexing Manual.
How to solve it, please help

Victory at last. OK, in case there is anyone out there who still has this (and start up no start) problems.
1. Delete the HP 1020 printer software via the Printers box from Control Panel (Visa 32 bit OS).
To do this, right click on the HP 1020 printer image, open the box, click on delete to remove the old driver & printer.
2. Go to HP 1020 site and find software downloads (words to that effect).
3. Download most recent driver (it is a plug and play driver -- currently [2-2011] there are 3 choices, this one is on top)
4. Install this driver. It will take a few minutes to complete
5. Plug in the printer and power up.
6 Once the dialogue box on the task bar says the printer is installed it's time to restart (if you look in the Printers Menu you probably won't find the printer. Don't panic yet)
7. Restart
8. Now look in the Printer Menu again. You 1020 should be there.
9. Test and good luck.
If this isn't the exact sequence for your computer, try a variation. The plug and play doesn't work on top of old software. Clear that old dog out and install the latest [Nov 2010 date] driver first, then plug in, then restart your computer.
Too Bad HP didn't publish this "fix" or even explain it on its woebegotten website. You can't drag this stuff up with a search engine. Next time you shop printers, tell the salesperson you deserve a big price break for putting up with all of this nonsense from HP.

Print to Laserjet 1020 hosted by Windows 7 64 bit via network from Windows 7 32 bit

Similar Messages

Maybe you are looking for