Print to miniDV tape-- help, please

I am trying to print from FCP to miniDV tape (specifically via a DCR-VX2000). When I select "Print to Video" I can see the image played on the camera's LCD screen, but I cannot get it to record. I am in VCR mode and I push the RECORD button before starting. Um?

The write protection tab is not engaged-- I mean it is not locking the camera and it should be able to record.
FCP will prompt me to hit Record and then OK. I will hit Record on the camera. The tape in the camera will begin to play the bit of black I put at the beginning of it. I will hit OK in FCP to begin "printing to video" and the image won't show up.
Alternatively, I can not hit "record" at all, and then the image will appear.
I hate technology. I don't have the manuel for this camera, but it is strange.
I've now used another camera so I do have the footage on a miniDV tape, but I'm still annoyed in the general direction of the Camera 1.

Similar Messages

  • Deskjet 3070A on line and connected by PC says unable to print, as not connected - help please

    I am on a laptop using Windows 7. I recently moved the printer to a different location. I have tried to print but to no avail. I have re-installed the CD and re-configured the wireless, restarted both printer and PC but no matter what, when I try to print, my PC comes up with the printer is offline error and will not print.
    Can anyone help please?
    This question was solved.
    View Solution.

    Go to Control Panel > Printers and delete all old instances of the printer.
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • When I try to print labels I get no preview of the labels and then it just prints blank pages. Help please

    When I try to print labels I get no preview of the labels and then it just prints blank pages. Help please

    I post the same instructions almost every day...
    Change the Adobe Reader Preferences
    Documents: set 'View documents in PDF/A mode' to Never
    Security (Enhanced): disable Protected Mode at Startup

  • HT1695 My iPad will not except my Kodak ESP 1.2 printer via wifi any help please

    My iPad will not except my Kodak ESP 1.2 printer via wifi any help please

    Is that model a wifi printer? As far  as I know, there are no kodak printers that are air print enabled. So you have to use a third party helper of some kind.
    Look on Kodak's site. They have options for various models. There might be an app that will help, I believe some models also work with google documents.
    If none of those work then you can look to third party apps. I have Print n Share and it works with my iPad, but there's also Printopia and Print Central and I'm sure there are others.

  • HT204587 iphone 5s finger print not working any help please

    hi
    the finger print has stopped working i have tried everything but nothing works please help.
    Thanks

    The iPhone comes with a 1 year warranty and 90 days of complimentary support. AppleCare + extends that as shown in: http://www.apple.com/support/products/iphone.html
    The following gives instructions for dealing with the forgotten passcode: http://support.apple.com/kb/ht1212

  • I'm having trouble printing playlist inserts.  Help please.

    I have never had this problem before. when printing a playlist insert, all printing is running together. A friend told me he is getting the same thing. I recently downloaded the latest itunes version. Is the problem on my end or your end. Thanks for your help.

    This is the iPhoto 08 forum and has nothing to do with Mail or Gmail. I suggest you find a Gmail user's forum or ask in the Mail forum.
    OT

  • Canon ip4700 amber lights blink 5 times will not print, 4 years old, help please

    Canon ip4700, amber lights flash 5 times, printer will not print, any advise appreciated

    This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
    It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
    My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
    So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

  • My updated Reader 11.0.06 now has a non working 'Poster button in the print window.. Help please?

    I use the poster function to print large images as tiled letter pages through my desktop printer.
    Recently updated to 11.0.06  (by itself actually...and I just noticed that the Poster button in the print dialog window simply does not work now.
    How can I get it back to working.
    Tried the "repair' drill but it accomplished nothing.

    Oooops  . Updated the driver on my Brother Laser printer and the 'Poster' button came alive.. once again.

  • Suddenly not able to print...  Help Please

    I have a MacBook Pro running OS X 10.4.11. I have always printed to an HP Photosmart C5200 series printer without any problems. Now suddenly, I can not print from any application. The printer works from my iMac that runs Leopard. The only changes would have been the automatic updates that run. I uninstalled the printer and then reinstalled. Then I uninstalled and installed a new printer. Still doesn't print. The printer doesn't even "pop" in the dock. When I try to print from Entourage, I get an error that says "an error occured while printing. Not enought memory." When printing from Word I get an error that says "Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Center. You may need to print again or adjust your printer settings." I don't believe the issue is with memory or the printer.
    Any ideas?

    DLFDNFDNS wrote:
    I have a MacBook Pro running OS X 10.4.11... The only changes would have been the automatic updates that run.
    Are those Mac OS updates, Microsoft updates or what?
    When I try to print from Entourage, I get an error that says "an error occured while printing. Not enought memory." When printing from Word I get an error that says "Word cannot print due to a problem with the current printer.
    Can you print with a NON-microsoft application?
    Consider booting the MB Pro from the Tiger Install disc holding the "c" key down. Select language, then from the Utilities menu, select Disk Utility. In Disk Utility, in the left pane, click on your hard drive and in the right pane, click on the First Aid tab. Near the bottom, click Repair Disk. If it finds any errors, it will try to repair them and then re-run the test again. After it re-tests without errors, click the Repair Permissions button. Reboot computer and launch Disk Utility in the Utilities folder and run Repair Permission from there.
    Try printing.
    HTH

  • I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default

    I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default. This was after I tried to implement the steps set out in Real World Photoshop CS5. I stuggele to match the colours of my two screens, the one a laptop and the other a LCD and the printer, even after calibration with Spyder 3. Really lost at present.

    Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
    Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
    If that didn't help, try here >  Apple - Support - iPad - Wi-Fi Assistant
    And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

  • My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    Restart your WiFi router and printer by removing power for 30 seconds.

  • My iphone 4S will not find my printer for printing from my iphone why can anyone help please

    My I phone 4s is switched on to e print but cannot find tany air printers on any Apple devices that I have

    Hey tomohawk122,
    Have any of the Apple devices worked before?  I'll post a few questions, and a document you can try, please let me know how it goes
    1. Have you had a chance to try steps like power resetting the router and the apple devices?
    2. how far away is the router from your ipad usually?
    3. which printer do you have?
    Please try the steps in this doc, under "no airprinters found" http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02623193&jumpid=reg_r1002_usen&lc=...
    Cheers,
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please.

    Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
    I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.

    Might be a corrupted printer preference file ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    ~/Library/Preferences
    Click Go
    Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
    Restart your Mac, restart the printer...

  • On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

  • HP Photosmart Premium c309g-m does not have a mirror image print option-help please

    After twice being dropped from HP chat support I have laned in this forum to get some help please.
    I need to be able to print mirror images from my printer and it simply is not a option-it's not a matter of turning on the
    option, it is not there at all.
    Thanks
    Donna

    Check the iron-on packaging for ink specs.   Make sure to use HP iron-on paper.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • Reduce .PDF file size in Acrobat 5.0

    Hi. Seems like there are plenty of ways to reduce the file size of .pdfs in later versions of Acrobat than in 5.0. Does anyone know of any I could try in the 5.0 version? The doc is 122 pages, all in black & white & has some images. I do not have the

  • Help with loading infocube from flat file

    Hi: I am using SCM 5.1 and the BI 7.0 component that comes with it. I am trying to create an infocube and load it with flat file data but getting errors. 1. First I created the infoobjects and the infocube. 2.a I first tried to create only the data s

  • Purchasing Document type NB-C

    Hi All Can someone tell me when do we use document type NB-C for a PO. It says Standard PO, but we have document type NB for standard PO. Then what is the difference between NB and NB-C Thanks Vijay

  • Error  oocuring after posting the IDOC

    Hi i am getting a error in a scenario the scenario is Idoc to file. when we post the IDoc, its getting posted successfully. but the pipiline is getting failed at the inbound message when monitoring in SXMB_MONI. i am getting the following error <?xml

  • KM Folders options setting (Custom Layout Set) ???

    Hi All,          We are working on EP 7.0 (NW04s SP10). We have a KM repository. (As a File system). It has some default options as: Content Management > KM content > Documents > right click & go to details. And we will get the default options as Vie