Print to my new Wireless HP3522 ePrint printer

I have a new Wireless HP 3522 ePrint printer which I've set up correctly. My question is, when it goes into sleep mode when not used for awhile, if I print to it from a remote location, will it come on automatically and print at my house??? I cant get it to print unless I'm here and actually turn it on by pressing the on/off button again even though it is on and in sleep mode, light dimming on and off. Any help would be appreciated.
Terry

Do you have the same issue when trying to print from your computer while it is sleep mode?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

How do I get my ipad to find my new wireless printer?

How do I get my IPAD to find my new wireless printer?

Is it an ePrint / AirPrint capable printer? If so, enable that feature and the iPad should see it automatically.

New wireless printer on Mavericks 10.9.2

I am trying to set up a new wireless, eprint, laserjet P1606dn on my network. My operating system is Mavericks 10.9.2. I can install the printer using the USB but I am unable to get it recognized by the Bonjour network to use it wirelessly. There is driver to download and the disk that came with the printer is not recognized by my iMac.

Hi,
Have you checked the following site ?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&sw_lang=&product=4110...
No more driver support but please use the instruction in there PLUS ePrint software and try again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1178 Do I want to create a new wireless network or join my current network? I can't connect an ethernet cable to the Mac / printer and to the wireless modem at same time - in two different rooms.

I am trying to set up Time Capsule so that I can do my first backup (after 1 1/2 years!) with Time Machine. I have read other forums, but in each case they instructions eventually do not apply.
I have connected my TC to my existing wireless router. This sits in a bedroom and cannot be moved as a rental home.
I have plugged in the TC and updated the software.
Now - do I want to A Create a New Wireless Network (remember I can't connect the TC to Mac using an Ethernet cable). B Replace an existing base station or wireless router with TC (only intend to use for TM as don't know other benefits as of yet). or C want TC to join current network.
Thinking C. If I choose C, it then asks A TC to wireless join current network (NO as already connected using Ethernet). B want to connect TC to my network using Ethernet to extend my existing wireless network. C want to disable the wireless network on this TC and connect it to my computer or network using Ethernet - CANNOT do this as devices can not be in the same room.
Or do I want to create new wireless network - first set of questions - choice A? What is the benefit to creating a new one when I won't be in this rental house for longer than 18 more months??
Please help and quickly! Thanks!

Let me suggest some things.
But first ask exactly what wireless router you have now and what type of broadband service?
Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
How is the printer connected and to what?
I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
Your multiple A, B, C are more confusing than helpful.
The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
Think carefully in the ideal world what would you like..
and what do you have..
We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

Cannot find instructions on how to connect printer to a new wireless network.

HP 4500 series was connected to my wireless network successfully for a year. Upon moving and obtaining new wireless network I cannot find instructions for changing wireless network for printer to recognize.

Hi,
Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Connecting Printer to a new Wireless network (changed network provider)

I have recently changed broadband provider and I am struggling to connect my printer (HP Deskjet 3050A All in One Printer) to my new wireless network.
I have clicked on HP within programs and tried to set up the printer but my laptop is not recgonising that the printer is connected via the cable so its not picking up the printer in order for me to set it up as a new device.
Help please??

jwatson84
Welcome to the HP Community Forum.
The easiest way to deal with this may be to install (reinstall) the Full Feature Software for the printer onto your computer.
The installation procedure includes a connection process that might resolve the issue for you without adding any more stress to the situation.
Along with the basic instructions and install videos, you can find lots of helpful Troubleshooting / Howto help at the printer's website support pages.
TIP: You do want to disconnect the USB cable from the printer before you install / reinstall the software.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Deskjet 3050A e-All-in-One Printer series - J611
Select your Printer from the “Results” list
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Old printer with new wireless modem/router

i just installed a new wireless modem/router and need to get my printer to work with my comps....i think i need to reassign the IP address and enter the wep...but dont know how

Hi dduve,
Set up a static IP address for your printer, click here and follow the steps in this document to set one up. Let me know if you need more help.
I worked on behalf of HP.

I have a new wireless router and now my laptop will not recognize the printer.

I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer. Operating system is Windows XP. Says it does not recognize the printer. It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment. Thanks.

You must reinstall the full feature software and drivers again to be sure it will work with the new router. This is the fastest way. Simply follow the instructions that came with the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I have a new wireless printer. Where's the print button on an iPad?

I have a new wireless printer. Where is the print button on my iPad?

1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

Installed new wireless router; don't know how to change printer settings

I just changed the wireless router which has created a problem with printing. I don't know what I need to do to change the printer settings to accommodate the new wireless router. Would greatly appreciate any help with how to do so. I'm on Windows XP, SP3 with a HP all in one on a wireless laptop (don't have wired connection). Wireless router is a linksys. Security AVG 8 trial version. Thank you!
This question was solved.
View Solution.

What is the model of your printer? Did you install the printer via a USB previously?
Please click on KUDOS if you find my solution helpful.

Cannot print remotely with new Wireless HP Officejet 4630

My old HP printer died last week, which is okay because I was in need of a new one. I chose the HP Officejet 4630 because it had the wireless printing option and was a 4-in-1. I work from home and I remote in to my office computer in another location. With my old hp printer, I was able to print but was connected with a USB cable. With this new wireless printer I cannot print from my remote location. I have tried a few times, restarted the computer and printer but it still does not print. I am able to choose my printer when I am logged into my work computer remotely. This is a big issue as I need to print reports at home from my computer at work. I am using Windows 7 and I've printed the wireless network test results which came back A-OK. Has anyone else had this issue and figured out how to print? When I look at the printer queue there is nothing...
Please Help!
Thanks

I just want to add that I am able to print wirelessly from my computer but not when I am remoting in to my work computer.

My Macbook won't talk to our new wireless printer. What should I do?

We have recently purchased a new wireless printer (Lexmark S600 Series) and my mum and dad's laptops (hp and acer) both talk to the printer. However my macbook and the imac we have upstairs do not talk to it as a printer. It will scan but it wont print...which is kind of the point of a printer So what I want to know is how to get the apple computers to print from our new printer.
Please help!
Thanks
Hannah x

Have you set up the printer on both Macs? Are the recognizing the printer as a scanner and not as a printer? Have you tried hooking the printer directly to a Mac to see if it will recognize it that way?
Here's a website with PDFs that might help you get it set up with the Macs.
http://www.lexmark.com/publications/pdfs/2007/s600/en.html
I've had a few pain in the rear printers that wouldn't work unless I hooked up them up directly. After that they seemed to work ok through my network.

Setting up printer, unable to connect to wireless and eprint

I'm setting printer up to a macbook The wireless and eprint are not connecting. Does it assingn an eprint address?
I'm not sure about the proxy server What should I do next. It says the printer has installed but I haven't taken out the
CD yet

Hello mberry.
It would help knowing which printer model you have and how it's connected to the computer.
Please, check out this document.
Getting Started with ePrint
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Connecting printer to new wireless router

How do I switch from letters to numbers when trying to put in security code from new wireless router?

Keep pressing the same key over and over....
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wireless and ePrint with Photosmart D110

Hi
Recently changed router and printing stopped. Printer was reconfigured to router and the wireless test was successful. When I try to install the driver on the laptop, it wont recognise the IP address that the printer shows.
So I tried the ePrint function which prints the email but not the PDF attachment. Got excited that there was this function but seems flawed.
Any ideas

Hello zaabara,
Welcome to the HP Support Forums. I see that you’ve had some problems printing since changing your router.
I have included a link to HP’s Wireless Printing Center – Troubleshooting Issues page. Please click on the + beside “Your printer was working over the network before, and now isn’t.” Within that section please click on the + beside “Was anything changed or updated on your wireless router recently?”. It will walk you through getting the printer onto your new wireless network.
For the ePrint feature of your printer, I have included the ePrint Job Did Not Print document. It will walk you through different things to check as to why your pdf document did not print when you sent it to the printer using ePrint.
If you run into any issues with the above, please let me know at which step things went awry. In addition please also include in your post the contents of any error messages and what operating system are you using on your computer (whatsmyos.com).
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Print to my new Wireless HP3522 ePrint printer

Similar Messages

Maybe you are looking for