Print to PDF (Acrobat9) from InDesign CS4

The Adobe PDF Conversion Settings will not allow me to use other settings than "standard.joboption". If I choose other settings it automatically jumps back to "standard. Anyone else got the same problem or maybe a solution?

The settings for the printer are in the printer properties, not setup (I think that is for the InDesign conversion - sorry, I don't have InDesign). When you say jumps back to standard, you mean in the resultant PDF? I assume that is what you mean and that suggests that in using the Adobe PDF printer, you never set the properties in the printer.
As for the PS issue, there is no need to print to file with the Adobe PDF printer. If you properly set the properties in the printer, just print to get the PDF. In the process a PS file is created and then sent to Distiller. Thus I have no idea what you are doing with the PS file creation.

Similar Messages

  • Scaling issue when printing to HP devices from InDesign CS4

    I seem to have a recurring error printing from InDesign CS4 (OS X Leopard 10.5.8) to both my HP printers (C3180 & Officejet Pro 8500). When printing at 100% size, the artwork gets scaled up slightly. For example, creating a simple 5 x 5" box ends up coming out at 5.125 x 5.125" on the printed sheet (with no scaling turned on in the print dialogue).
    I've not been able to find any support issues related to this on either HP or Adobe's site. I suspect it's s driver/postscript incompatability issue. The same artwork prints at the correct size when exporting to PDF and printing from Acrobat.
    Curious if anyone else is experiencing the same problem.

    A large percentage of problems we see related to printing seem to be with HP printers. Are you doing borderless or anything like that? What is the page size and scaling in the driver?

  • Issue in PDF export from InDesign CS4

    Hi,
    We are facing one issue while creating  PDF file from the InDesign document. The document has 2-column texts created in InDesign CS4 application.
    The issue is, we export the PDF from InDesign document. When we open the PDF in Acrobat and selecting the text (using selection tool), the second column text is selected first and then it selects the first column text. So while copying the content from the PDF, it comes is reverse order (that is Second column text, then first column text).
    Could anyone suggest me how to solve this issues.  Is this bug in ID CS4?
    Thanks,
    Gopal

    Hi Uwe,
    Below is the answer to your question.
    Question: Did you set the "TouchUp Reading Order" in the preferences of your Acrobat other than "Left to Right, Top to Bottom"?
    Answer: No, we did not change the Touchup Reader order. It is in "Left to Right, Top to Bottom"
    Question: What version of Acrobat Pro are you using? Or is it just Adobe Reader?
    Answer: We are using Adobe Acrobat 9 Pro version. We tested in Adobe reader X (VER 10.1.3). But the same problem exists.
    Question: What kind of tool are you using? it the "TouchUp Text Tool"? Or is it the "Select Tool"?
    Answer: We used both Select Tool and TouchUp Text Tool. Both selects the text in reverse order. (that is right column to Left column)
    Please help me on this issue.
    Thanks,
    Gopal

  • Pdfs exported from InDesign CS4 & 5 not displaying or wrongly displaying satin effect

    When I apply satin effect to a text block, it often doesn't display once the file is exported to pdf (using CS4 and Acrobat 8).  Satin effect applied to text or strokes in CS5 don't display fill or stroke color, just the black part of the satin effect.   In the first instance I was exporting to PDFx1a for a commercial printer.  From CS5 I was doing "high quality print".  Anyone else have this problem?

    When I apply satin effect to a text block, it often doesn't display once the file is exported to pdf (using CS4 and Acrobat 8).  Satin effect applied to text or strokes in CS5 don't display fill or stroke color, just the black part of the satin effect.   In the first instance I was exporting to PDFx1a for a commercial printer.  From CS5 I was doing "high quality print".  Anyone else have this problem?

  • PDF Bookmarks - Change Default Width When Creating PDF File from InDesign

    When creating a PDF file (from Indesign CS4) I automatically create the PDF bookmarks based on the InDesign document's Table of Contents.
    But by default the width in the bookmarks is always set at "Fit Page".
    Is there a way to change the default to "Fit Width" in Indesign before the PDF is created?
    It's too much trouble to change every bookmark in the PDF after it's created.
    Thanks for any help in advance!

    Thanks, Steve. I have actually previously done what "fogharty" suggests and it does work if I want to set the pages to "fit width" or a variety of other options. However, none of the options is inherit zoom which is what I, and many other from the sound of the thread, need and want. We want to respect our end users--not dictate how they must view our PDFs. Hopefully, Adobe will listen and make this option available soon.

  • Cannot print to Adobe PDF from InDesign CS4 under Snow Leopard (10.6.2)

    Hello All,
    Hopefully the subject line says all. Running SL and CS4, and after manually deleting the "old" Adobe PDF 9.0 driver, I am unable to print to PDF — or select "Save As Adobe PDF" under the Mac OS print dialog. This is insanely frustrating on may levels, as this was once a 3-minute operation and now has stretched into two days of futile searching for a solution.
    There is a "tech doc" somewhere out there that offers a "solution". But beware, as it has not worked for me. Once you manually search for and remove the Adobe PDF 9.0 driver, you are supposed to magically be able to select the "Save As Adobe PDF" option. This is not the case for me.
    Am trying to print, once again, from InDesign CS4 (NOT via the Export command as that will not allow me to set page size, or print separations). There is no Adobe PDF driver there anymore and there is no option to print PDFs. Of course, I can rest easier with the knowledge that everything is easier now in SL.

    For a long time I was printing out of InDesign CS4 to a PS file and Distilling to a PDF, either composite or separated. Then Snow Leopard came along and that workflow seemed no longer available. It seems some well meaning people didn't understand a professional DTP workflow.
    I had to work between two Macs to create a project and then make separations.
    Eventually I went back to the Adobe InDesign forums and folks insisted that a Adobe PDF 9 printer should be available in my print drivers.
    On that suggestion I completely uninstalled Adobe Acrobat Pro 9 and then reinstalled it.
    It worked, I had the PDF printer back and can now print to a postscript file and do separations as I always have.
    (Another story is that Snow Leopard killed my Epson 2200 printer)
    At one stage I did an update of Acrobat 9 and it caused me to lose the Adobe printer again. Going through the procedure again brought it back and this time after a Acrobat 9 update it stuck.
    In my opinion somebody screwed up. It's not enough to be able to create PDFs out of Microsoft Word. There are people out here trying to make a living and need to be able to create print separations for some offset printers.

  • New problem printing from InDesign CS4 in Lion

    After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from  InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
    "Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
    This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
    I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
    I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
    Any help would be greatly appreciated!

    mmsteer,
    I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
    Remove the Adobe PDF PPDs from the following folders:
    OS/Library/Printers/PPDs/contents/Resources/en.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
    OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
    Be sure to go to your system Library, not your user Library.
    Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
    Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

  • PDFs exported from InDesign cannot be printed

    Our Marketing Manager is using Adobe InDesign and exports her documents to PDF. These PDFs won't print in any of our printers in the office. It spools and then gets stuck and it actually makes our HP Coloured Laser Printer throw an error (error 79) and we'll have to restart the printer due to this error. We can print other documents and other PDFs in the printer so we know it's not a printer driver issue. In fact, we have isolated the problem to only PDFs exported from InDesign. Even if we create a blank document or add just text from InDesign and export it to PDF it still won't print. Really odd.
    **I also posted this in the InDesign thread but was asked to post it here too. I tried printing the document using Adobe Acrobat and Adobe Reader with no luck. We tried printing directly from InDesign but it is inconsistent, sometimes it will print but most of the time it does not.

    Hmm. Yeah. The ID forum may be more help. Especially if it's also a problem in ID.
    My first suspect would be corrupt fonts or possibly an image file. Can you create a blank ID file with no text (maybe insert just an image or something that isn't on any of the other ID files) pdf it and print it?

  • How to create a smallest file size pdf from indesign CS4 document

    How to create a smallest file size pdf (suitable for upload to a website) from indesign CS4 document which contains multiple illustrator CS4 illustrations.
    I have chosen the "smallest file size option" but the pdf file is over 30MB, can anyone help please.
    Thank you

    One trick is to
    Set the placed graphics to have a transparency of 99.9% (you can do this with Find/Change and select Objects)
    This is enough to force the graphics throught the Transparency Flattener
    Next set the Transparency Blend Space to RGB (Edit>Transparency Blend Space)
    Next set a custom Transparency Flattner Preset Edit>Transparency Flattner
    Next
    Use File>Export and choose
    Smallest file size
    PDF Compatibility Acrobat 4 (PDF 1.3)
    In Advanced Section - go to transparency and selec the new Flattener Preset you created.
    *this will convert your vectors to raster, but it should reduce your file size

  • Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (Interactive), you could set the View settings for Page Layout and Zoom.
    While, as Jongware points out, its possible for individual users to override that option (Preferences > Page Display > Default Layout and Zoom), the number who will actually do that is actually very tiny.

  • PDF Files from InDesign to larger

    Hi
    I just upgrade my acrobat pro to 9.3.3. And im running Snow leopard.
    So - now the ps (print postscript) option is also gone for me.
    I have som old files from indesign, i printet at ps file and used my
    distiller to make the pdf file.
    Result = 168 kb
    If i export this from indesign, CS4
    I use same distiller settings
    Result = 860 kb.
    If i export this from indesign, CS4
    I now use smalles file settings
    Result = 290 kb.
    WHY is it not possible to make smaller pdf files direct from indesign.
    Also Press files get very large.

    Here's an article explaining some of the things stripped from your document when you use Distiller, compared to the Export function in inDesign
    http://indesignsecrets.com/creating-pdf-export-or-use-distiller.php

  • PDF (created in Indesign CS4) separates in CMYK, in stead of PMS

    I have sent a PDF, created in Indesign CS4, to the printer. I need the design to be printed in PMS colors, but the printer says the PDF color separates in CMYK, not PMS colors.
    I'm at my wits end trying to find where I went wrong (I should add I'm a beginner at all this). I need help...
    Here's what I did:
    I have changed the colors in a CMYK based design of a business card to PMS colors. I have changed the colors of an Illustrator file that is used in the design to PMS colors as well.
    When I look at the separations preview it looks fine, only PMS colors.
    I then created a PDF, using the [High Quality Print] Adobe PDF preset. In Output Color Conversion is set to 'No Color Conversion'. In the Ink Manager 'All spots to process' is not checked. CMYK inks are visible in the Ink Manager, but so are the Pantone Inks I used.
    I noticed one strange thing, the swatch options for Pantone Process Cyan C are different thatn those in other PMS colors, the Colortype is 'spot' but the Color Mode is CMYK, greyed out so that I can't change it to Pantone Solid Coated. Even weirder, I can't delete that strange swatch. I tried adding the pantone colors to my swatches again, in a different file, I added Pantone Cyan C and it looked fine, but when I reopened the swatch options it was strange again.

    Yes, I have added cropmarks and page info to the pdf.
    I checked the separations in Acrobat Pro with a friend. Both Pantone colors and CMYK show up. When I disable the CMYK, nothing of the design disappears (cropmarks and page info don't disappear either, they seem to be in both Pantone and CMYK).
    I saved a new pdf, without crops and page info, and CMYK still shows up in the separations.
    I'll contact the printer tomorrow, I'm pretty sure he should be able to use the file I sent him.
    Thank you all for your help!

  • Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

    I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
    Help/input would be much appreciated. Thank you!
    Kristen.

    you should properly install adobe products, not move, migrate or otherwise transfer them.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Error when printing a PDF direct from SAP archive

    Hi together,
    I try to print a PDF direct from SAP archive and I got the error ""C:\Program files\Adobe\Acrobat 7.0\reader\AcroRd.exe" /p /h" not found. In the internet I found several topics which describe this way to print a PDF without open the Acrobat Reader.
    The customizing for document management (Local application) seems o.k. If I remove in the registry the parameters /h /p for print, Acrobat Reader will open and show the document if I use the print button in SAP.
    Have anybody an idea what the reason is?
    Thank you.
    Regards
    Thomas

    The rundll32 error seems to have disappeared.  Until this morning I had both this error and the rundll32.  All other types of docs open fine.  This one will open if saved to the desktop first, but not from Outlook.

  • How to Print  a PDF file from within a ABAP ( from gui input)

    Hi champions,
    This is Client requirement:
    "We need to print a PDF file from within a ABAP"
    We first need to test whether it is even feasible, and then if it 
    is, then write a small test ABAP which can accept a PDF file
    name as input (from GUI) and then print it to a SAP print
    device (printer).”
    Please Can any body help me on this.......
    It's urgent
    Thanks
    Basu

    Check following blog for PDF output from SAP
    /people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
    anya

Maybe you are looking for