Print to Print Server

Hi
I am trying to add my Mac Pro to my home print server and cannot seem to get it working. I have tried every config option I could think of.
On my home network I use four other machines (PCs) to print through this print server (Air Link 101 model #apsusb2) without issue.
I have tried numerous options using the default browser and the IP set up area. Strangely, the printers seem to be discovered by Bonjour in the default view, but I cannot print to them. If I connect/add them from this view and try to print a document it fails almost immediately. I thought this would mean that there was a driver issue, but even the generic drivers do not work. My printers, while fairly old, are supported (HP LaserJet 4 Plus and HP PSC 950 xi).
My results using the IP printer settings have given me different results. I can get the printers to respond, but they only print out a few pages of garbled text and spit out a lot of blank paper.
Any help would be greatly appreciated - PLEASE. ...my bag of tricks is now empty.
Lance

You used the wizard to set up the PCs, right?
With OS X, we just need to fill in all the right details manually to make it work. To set up for the IPP protocol, click ADD in Printer Setup, click IP printer, select IPP protocol. Fill in queue name P1 (found in the manual page 12 as "port name: P1."), then the IP address, then select model.
You can use a manufacturer's driver for postscript (4 plus), but you have to use a third-party driver for non-postscript printers (PSC).
Either Gutenprint 5.0.0 or hpijs + ESP ghostscript will support your PSC 750.
http://www.linux-foundation.org/en/OpenPrinting/macosx
HTH
edit - maybe only hpijs + ESP ghostscript support the 750 xi.

Similar Messages

Server created print ques printing directly to the printer

I'm trying to enforce quotas as well as push out a global set of printers (i.e. not setup locally) I can do this no problem, but my managed macs always print directly to the printer, not via my server.
I'm installing the printers locally on my server (printing directly to the I.P of the printer, then the corresponding ques appear automatically in the print service under server admin. I assumed that print jobs would be automatically parsed via the print service ques, and thus be able to enforce quotas.

I'm attempting to setup the very same thing. I haven't gotten to try pushing the print ques to the managed clients via wgm yet, as I can't even seem to get the quota system working at all.
I can get the que setup on the server, then add the printer to the client. When i pause the que on the server, the client print jobs are being held correctly, but there is no evidence that the quota system is even starting up or functioning correctly.
I can find alot of people complaining about the quota system being broken in 10.3 and 10.4, but I can't find anyone talking about 10.5's printer quota system at all.

Can't print from print server

I have an HP PSC 1610 all in one. To set up my printer I pluged the USB cable into the Mac and had no problems. It obviously has the drivers because it added my printer in Print & Fax and it prints with no problem. What I want to do is unplug my USB and plug it into the print server, and then tell the Mac that the printer is located at IP address. This works very well with a PC. I just can't find out where to put in the IP address. If I install an IP printer, I have to use the drivers from another printer because my PSC 1610 is not on the list of drivers. It will print, but I'm not sure what i'm sacrificing. I doesn't make sence.

cadillacjoe,
Have you played with this network configuration guide offere by DLink?
http://www.dlink.com/configurator/index.asp?vendorID=dlink&adLoc=rightNav&pid=6&
I ran some senarios and came up with assorted products and plug-in options.
This site:
http://www.compuplus.com/i-D-Link-DPR-1260-RangeBooster-Wireless-80211g-4-Port-U SB-20-Print-Server-1006974~comboid-803.html?sid=wqi0i4dj031t958
indicated the following:
"More Info & Product Specifications:
The Ethernet port on the Print Server can be used as a wireless bridge.
This provides wireless connectivity for any Ethernet-enabled device, such as a computer, Digital Video Recorder (DVR), or Network-Attached Storage (NAS) to the wireless network."
What flexibility do you have in where you locate the G3 and the printer. Could the D-LinkDPR-1260 be hardwired to the B&W instead of the otherway around?
Ji˜m

Printing problems on Server 2008R2 - Server 2012R2

Hi,
We have troubles with Firefox and printing pages.
First i want to say i have already tried all this steps:
https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
Let me explain my problem:
In a TerminalServer Session i want to print a website from firefox.
Sending the print job in Firefox works without error reports, but then the printer "Data" lamp is blinking and the printer Says proccessing.
First i thought the printer has been broken but then i tried this on 6 other printers in our company.
Printers: HP, Sharp, Brother, Develop.
Every Printer has the same problem. No one could print anything anymore. I had to turn off the printers to get them working again.
Resetting the about:config -> print_printers was not working, after this the printer was printing one Job then the problem was there again.
I also have deleted the profile in AppData, but this has not resolved the problem.
So can you please tell me what the problem is?

Hi,
The Dump File has abaout 290mb, what should i do with that file?
The Machines are running on 2 different Hyper-V 2012R2 Hosts,(1 HP Server and 1 Supermicro Server, Intel Xeon 2620V2) the latest Integration Services Drivers on the guest machines are up to date.
This is the printing Problem:
Firefox sends the Webpage to the Printer. After a short time the printing Job is cleared from the list of actual Jobs.
The Printer Says now he got a Job an says "Processing...", well.. this happens by every printer in our Company.
Only turning off the Printer and on again makes the Printer working again to print anything from other programs.
At the moment where someone sends a print Job from Firefox (Problem exists only on TerminalServers 2008, 2008R2, 2012, 2012R2.) to any Printer, the Printer must be restarted to work again.
Printing from Server 2003R2 works.

How to install P1102w Printer on win server 2003 without connecting the printer

Hi guys,
i have to insatall p1102w printer on my server 2003 to print from my client pc witch the p1002w locally connected when i use remote desktop connection.
does anyone knows how to.

Hi,
The P1102w is an Host-Based printer, any host-based printer does not support Citrix / Terminal Services / RDP connection.
You may find that listed on page of the following guide:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03635702/c03635702.pdf
You may try installing the drivers on the client itself and check if that may work..
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Problem with cheque printing in production Server Tcode - FBZ5

Hi
Cheque Printing using SAPScript with TCODE FBZ5.
I had a problem with cheque printing in production Server. TCODE - FBZ5
It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
Could you please let me know, where the problem is occuring.
The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
Sekhar

Hi,
For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

How can I list print queues per server via power shell script

Hello,
we are managing many print servers on our domain environment, now for auditing purpose I need to report print queues per server, and it seems bit difficult task doing it via GUI in print management view, could someone help me with script which
gets me the no. of print queues on each print server.
Also I need to list all the print drivers installed on each print servers.
I tried to list the drivers " Get-WmiObject win32_printerDriver -filter " but this will get me complete information about the driver, I need to list only the driver name (-filter) either _RELPATH or _PATH
dibu

You can also use WMI like this:
(get-WmiObject win32_printer -computer ws702).count
I don't understand what you mean by list only. Just select what you need.
See: http://technet.microsoft.com/en-us/scriptcenter/dd742419
That will give you some basic background on how to use PowerShell to get the properties of objects.
¯\_(ツ)_/¯

Need to install Canon Network Printer drivers on server...?

I am about to add a Canon PIXMA iP5200R network printer to my intranet via its Ethernet connection. I have configured and tested printing sucessfully from my PowerBook G4 directly to the printer via my intranet after installing the necessary drivers and software from Canon.
Now I will like to use Mac OS X Server running on my Xserve G5 to manage the printer, and I do have some questions pertaining to this:
First question: since I don't think Canon supplies any PPD file for most of its printers, do I need to install the iP5200R drivers and Canon IJ Network Utility on the Xserve?
Second question: is there a Command Line Interface for Printer Setup Utility, or their relevant commands in CUPS, or do I need to use ARD to get the GUI of Printer Setup Utility on my Xserve?
Third question: after using the GUI or CLI of Printer Setup Utility to setup the printer on the server side, will this appear in WGM when I bring up the window to add a new Print Queue in Print service?
Fourth question: according to the Apple Print Service Documentation, if I share the Print Queue via IPP (I will only be turning this protocol on) and I have installed the Canon drivers and software on all the Mac (client) computers on the intranet, then I can use specific features of the Canon printer (such as direct CD/DVD Labeling), assuming if the Mac computers select this Print Queue via their Printer Setup Utility?
Fifth question: this Canon iP5200R printer has the ability to allow only certain computers to send print jobs to the printer via a table of either MAC ID or IP addresses, so if I enable this feature on the printer and limit to print jobs coming from the server only, I should be able to prevent user from bypassing the server to print, assuming I am also locking down the selection of printers in Print Setup using WGM?
Thank you for reading.

Questions have been answered.

I am unable to get print from JBoss server

i am unable to print from JBOss server , but i am abele print from JRun , same code deployed in JBOss , i am getting this error:
sun.misc.ServiceConfigurationError: javax.print.PrintServiceLookup: : java.io.FileNotFoundException: http://devuc.corporate.ge.com/ftlt/META-INF/services/javax.print.PrintServiceLookup at sun.misc.Service.fail(Unknown Source) at sun.misc.Service.parse(Unknown Source) at sun.misc.Service.access$100(Unknown Source) at sun.misc.Service$LazyIterator.hasNext(Unknown Source) at javax.print.PrintServiceLookup$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at javax.print.PrintServiceLookup.getAllLookupServices(Unknown Source) at javax.print.PrintServiceLookup.lookupDefaultPrintService(Unknown Source) at sun.print.RasterPrinterJob.lookupDefaultPrintService(Unknown Source) at sun.awt.windows.WPrinterJob.getPrintService(Unknown Source) at sun.print.RasterPrinterJob.print(Unknown Source) at sun.print.RasterPrinterJob.print(Unknown Source) at presentation.BaseFrame.doPrint(BaseFrame.java:1068) at presentation.MainFrame.JMenuItemPrintDataSet_actionPerformed(MainFrame.java:1368) at cmpresentation.CMMainFrame.access$33(CMMainFrame.java:1) at cmpresentation.CMMainFrame$SymAction.actionPerformed(CMMainFrame.java:850) at javax.swing.AbstractButton.fireActionPerformed(Unknown Source) at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.setPressed(Unknown Source) at javax.swing.AbstractButton.doClick(Unknown Source) at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source) at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Window.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)
can anybody help on this
Message was edited by:
ravindar_reddy

no , i am tring to print some data form swing component
that time i am getting this error

Can I print report to a printer thru report server?

If I use a report server and run the application thru browser, can I print the report to a print thru report server? and How?

hello,
use DESTYPE=PRINTER to print directly to a printer. you have to set DESNAME to the name of the printer
regards,
the oracle reports team

Help on printing through Output Server

It seems that when I print from test presentment to PDF or to the local printer through my Output Designer, I get two pages printing out which is correct. When I compile and run the .dat file through Adobe Central server, I am having the same .dat file print out 5 pages with blanks on the second and 4rth page. I have the job setup with two tasks called PGCNTGET and PGCNTSET. I would assume if my test presentment to PDF and local printer are printing correctly, it should print correctly through the server. I did remove the PGCNTGET and PGCNTSET tasks from the job and only used JFMERGe and in that scenario it does print correctly but of course without page numbering. Can you please suggest on how to debug this in Central since I am not as familiar with Central Server.

I've never used the PGCNT agents but debugging with Central requires that you set the "verbosity" for the agent(s) to
i trace
mode. This can be done using
b Central Control
on the server - which you may not have access to,
b or
it can be specified as an option for the task. If the task is defined in the job management database to include the
b @OtherJobTokens
parameter then it can be done using the
b ^job
line in the .dat file. For the print agent (JFMERGE) it is done with the
b -v
option (-v0 sets trace mode). If it is done using Central Control, then verbosity for the Print Agent would be set to
b -10
(don't forget to set it back to the current setting). The agent will then put all of its trace messages in the log file (usually jfserver.log) and you will need to get that file from the server (it is plain text). Note that there are some bogus messages and others are difficult to understand but it might point you in the right direction.

Remote Desktop local printer redirection problem - Server 2012 Foundation

Hi,
I am trying to print from Windows Server 2012 Foundation to my local printer hosted on Windows 7.
When I enable local resources in the RDP client, I can see my printers on the server like redirected. All seems like no problem occured. But only print does not work. ;-)
I can see the document name in the queue with Error status.
I tried set up GP with disabling Easy print, the drivers are identical on both machines, event logs are clear.
The server is freshly installed, running only File server role. No Domain controller role is set. No Terminal Service is set (i think in Foundation is it not possible), only allowed RDP.
RDP client is the newest. I have not any problem to print from other servers (WS2003, WS2008R2) using this printer. Everytime is the printer automatically redirected to TS*** port and works.
I spent few hours searching solution with no effect.
Any idea? Many thanks!

Hi,
Did you find any error message during this issue?
Please check you have enabled necessary port for printer redirection on server side. You can check “Do not allow client print redirection” is disable under GPO setting. Also the user must have enough permission to print the document. Please check below link
for more information.
1. Terminal Server and Printer Redirection
2. Five reasons printer redirection causes Windows printing problems in RDS
Hope it helps!
Thanks,
Dharmesh

Wireless network printer using print server

I have a USB HP LaserJet 3015 printer connected to a print server, Level One FPS-3003 and then connected using RJ-45 LAN cable to my wired/wireless LAN switch router. It works correctly with all my Windows XP and Vista pcs on the LAN wirely or wirelessly.
I recently bought MBA and configured it to connect the printer wirelessly. Before that, I connected the printer directly onto the MBA and it works like a charm. Once I complete the setup and I tried to print a page from Word Mac 2008. It failed. The print job showed that the Printer Paused and job status was stopped. I tried to click the button of Resume Printer and the printer became Printer Ready but the print job status remained Stopped. I clicked Resume button (Resume printing of selected jobs) and the printer changed to Printer Paused.
It appears to me that the print server does not like Leopard. I look at the print server menu and the OS requirements are stated Windows 98 SE/ME/2000/XP/2003 and HP-UX, Unix, Linux and RFC-1179 LPD System. Is there any workaround to make it work with Leopard. Thanks!!

Usually you'll find all the info you need listed under unix or linux (print server manual). Oh, but I see the manual is for Windows only.
The easiest printer setup will be to plug the printer into USB port 1 and use IP Printing > HP Jetdirect protocol. No Queue name. Refer to manual page 50 - TCP/IP port 9100 equals HP Jetdirect protocol.
For scanning, you can try the TWAIN-SANE drivers:
http://www.ellert.se/twain-sane/

Default D:\i386 When Adding 86 Print Driver To Server 2008 R2 64

This has happened several times with a printer that i have installed on the server.
Printer works fine, but in sharing, additional drivers, when adding a 86 driver, i get the box "PLEASE PROVIDE PATH.....COPY FILES FROM ........D:\i386.
I have the proper driver, i installed it on my 32 bit xp computer, and printed fine by adding the printer by tcp on my computer.
I am trying to add this driver, so when i share the printer on the server, an xp machine can receive the drivers and install .
Any ideas
Thanks

Check once again whether you are configured printer properly or not?
Still you face problem, Get a help from respective
print/fax forum
Regards, Ravikumar P

Printing Page from Server

I need to print a form from a JSP that was sent to the clients browser, but without the users intervention (or knowledge). Is this possible using the JavaScript server tag? If not, will this take a good bit of code with the Java libraries?
Thanks.

Automatic printing of an HTML page can be acheived using some JaveScript. See the HTML page below.
Hope this helps.
Chris
test.html
<html>
<head>
<title>Test of Window print</title>
</head>
<script language="javascript">
function printPage()
if (window.print)
window.print();
else
alert("Sorry but your browser does not support this option.\nPlease use the print option in the file menu.");
</script>
<body onLoad="printPage();">
<p>Hi there</p>
</body>
</html>

32bit windows client PC not able to print from TS server 2008 64bit

I had a HP M1216NFH printer install at branch office. The branch user will need to remote connect to Terminal Server to access the stock program and print the order back to M1216NFH printer. But none of the branch user are able to print remotely.
The Terminal Server is running on Windows Server 2008 R2 Standard 64bit version, and all the branch users are using 32bit Windows 7 and XP version. The printer redirection is created during remote session, and user is able to select the printer to print, but is nothing come out from the printer.
I had install x86 printer driver, but is still not working. Server is auto using remote desktop easy print driver when printer redirection in remote session.
I did try connect branch user PC to another Terminal Server running on WIndows Server 2003 R2 Standard 32bit version, and tested is no problem to print.
Can anyone guide me what is the step that i was miss out for Windows Server 64bit configuration in order to allow 32bit windows client to print?
Thank you.

I believe the only way to print client side from a web app would be to use the ActiveX print control off of the viewer (disregarding the ugly way of using the browsers print button).
If there is another way I am sure someone will correct me

Print to Print Server

Similar Messages

Maybe you are looking for