Print to Tape color bars and black order

Hello. i'm about to print a videoclip for a tape. my question is the following, in the print to video setup theres is the option for color bars and black.. but the color bars come first and then the black. i would like to have the black first for 2 minutes and then color bars for 30 seconds..how can i do that?

I want full control over how things happen. As an added benefit, by keeping everything in the sequence timeline, I have the ability to use a custom countdown clock.
x

Similar Messages

How do I add color bars and black leader to beginning of sequence?

I am exporting a film as a Motion JPEG A file for my post sound guy and need to put a minute of black, followed by a minute of color bars, followed by 30 seconds of black at the beginning of the movie. I can't figure out how to do this since the only way I know of to add color bars is in the "print to video" or "edit to tape" functions. Any ideas?

Color bars can be generated a variety of ways - easiest is to go to the Effects tab, then "video generators" then choose "color bars' (I think you can choose w/or w/o tone) and drag it to your sequence's timeline. Then add slug for black leader amount you want (you can increase/decrease it as needed)

Lost Color Bars and Unrendered Slate

Hi,
Installed FCS3 onto one system on an Apple Xsan as upgrade. Under the Machine login all works fine I can see Color Bars and anything that needs rendering plays with the slate as normal.
Now under a Client login, The Slate is missing and Color Bars are white in the Viewer (Set to RGB) and Black on the timeline.
I have killed all the Clients files on the local and network homes ie fresh install. but still has the same problem.
Does not make a difference what format you are in but when you go back to the Machine all is fine.
Any ideas..... as when you are playing the unrendered sections and come to a normal section it just keeps a freeze and then falls over asking for faster hard drives. But once rendered will play fine.
Thanks
Phil

The main user should have a folder named "Constant Frames" in the Render Files folder. The color bars and unrendered slates are in there.
Even if you delete it, FCP should create that folder and it's content at the next launch.
You might try copying it from the main user to the Client users Render Files folder.
Doesn't solve the question of why it's not being generated though.

Print Issue: Removing Color Bars

There are color bars and add compass like bullets on the outside of my document...Can anyone tell me how I can remove these when I print using Adobe Reader 9.0? Thanks!!
Stacy

Do you have any suggestions on what I should do? I've been trying to look for a print preview screen to see if I can remove them there...but haven't had luck (and have been acquiring many gray hairs in the process...no surprise).
Thanks again for your help!!

Colors not printing correctly. Only blue and black work.

I just got a new HP OfficeJet all in one inkjet 8620 printer. The colors aren't printing correctly. Everything comes out light blue with black lettering. I tried installing new cartridges (genuine HP) and also tried gently shaking the cartridges. But the problem persists.

Hi @Iolanthe ,
I see that you are experiencing issues with the colors not printing correctly. I would like to help you resolve this issue.
I have provided a document with some steps to try to see if that will resolve the issue.
Fixing Print Quality Problems for the HP Officejet Pro 8610, 8620, 8630, 8640, and 8660 e-All-in-One...
Please let me know the results of the Print Quality Diagnostic Page?
If the test pages are printing properly, it could be a software issue.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 8620)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Let me know how the printer name was listed.
From the application, make sure you are selecting the proper paper type.
Try another application to see if you have the same issue.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to print a downloaded color document in black or gray scale

I have Adobe Reader 9; Windows Vista Home Premium; HP Officejet Pro 8000 Wireless printer. I have downloaded a document that is pre-set to print in color. I want to print it in black or gray scale. I click on the printer icon for the printing pop up. When I click on the Properties bar to make the request for black or gray scale, nothing happens. What steps can I take to convert the pre-set color download to be printed in black or gray scale? Thanks!

I have only had the experience when I have downloaded a link from within an email to my Hotmail account when the download has already been set up in color. To date, I have not had that problem with Word. There are specifically two situations regarding two different monthly emailed newsletters. This is through Internet Explorer 8; Windows Vista Home Premium. (I will not use Internet Explorer 9. It causes blocks for routine procedures, especially involving my Hotmail account--such as not being able initially to download a normal attachment or, if downloaded, not being able to print a normal download attachment.) However, after I sent out my request for help, I switched to Mozilla Firefox and was able to print the "color" download in black right away because the Preferences bar responded as it should. (Through Internet Explorer 8, regarding this particular link/download/attachment, the printing pop up had a Properties bar. However, I am aware that, in some other pop up formats, there are both a Properties bar and a Preferences bar to choose from.) I have Mozilla Firefox as a backup because, sometimes, I have to resort to it to download email attachments (whether black or color) coming from the east coast when they will not download through Internet Explorer 8. (I am near the geographic center of the US.) Thank you for your interest in my concern. I will gladly accept any advice regarding being able to print an email attachment/link color download in black when using Internet Explorer 8! Does it depend on how the link attachment is set up or what the link attachment is??
[private data removed]

Color Bars and Monitor Calibration

Hy,
Trying to calibrate my monitors using the FCP internal color bars is completely different from using the camera's color bars...!
What is your experience in that?
I absolutely dislike the image I get on my monitors when I try to calibrate it with the internal Bars. Actually I almost can't get the lower right, light gray stripe come visible. I have to push the brightness to the maximum and the image is terrible.
On the other hand, using a recorded camera's bars, it looks nice.
What's up?
I'm using a PAL sequence by the way.

Luis
Are you saying you are using PAL clour bars to adjust your Mac computer displays?
If you are, then that is wrong
You can only calibrate computer monitors using a computer display profiling system using a probe.
such as:
http://www.gretagmacbeth.com/index/products/productscolor-mgmt-spec/products_cm-for-creatives/productseye-one-display.htm
If you are adjusting a PAL monitor, you should use, preferably a test signal generator, or the bars connected direct from the camera to the monitor
Dont use Final Cut Pro or bars recorded to tape as the test signal, you must iliminate any interference to the signal caused by misaligned electronics.
G

Photos print in three colors but no black

Using Photoshop Elements 12 and a new Canon inkjet printer, my photos come out in three colors, but no black. I have chosen to let Photoshop manage the color, but I cannot disable printer color management in the printer preference dialog.

Welcome to the forum.
As your problem is a technical one, involving the printing from PsE 11, I think that you will receive quick help in the Photoshop Elements Forum. I will Move your post to that forum, and your link and any e-mail subscriptions will follow along perfectly.
I would add a Reply with the exact Canon printer that you are using, and also the printer's driver date and version, and the driver can have great impact on how the printer performs.
Good luck,
Hunt
[Moved to Photoshop Elements Forum]

Color Bars and tone in FCP X?

Just downloaded FC"P" X and having a look around I cant find Color Bars or Tone anywhere...?
Did a quick search on the help... but couldn't find anything.
Surely I must be missing something here - they must be available right!!?
I know I could output some from my deck or earlier version of FCP but thats not the point really is it. What possible reason on God's green earth could there be for omitting something so simple. Sorry but most del specs (even for digital tapeless) require bars and tone.
Can someone point me in the right direction - they must be in here somewhere.
Thanks in advance
J

If I were to use FC X for a delivery then that would be the way to go I suppose.
Or generate b+t on the deck and ingest to the computer and then import to fcp.
Dont think I'll be using FC X for anything in the short term though. Just playing around. See where it goes.
So many odd decisions - why get rid of a perfectly good, simple feature like "make freeze frame" - I know you can do it using the retime tool now but its a round about way of doing things.
Sorry if sounded rude - there are so many crazy Apple fan boys willing to jump on people here at the slightest hint of criticism :-)
Thanks
J

Print JFrame without title bar and border

I am trying to print out a JFrame which contains two JPanels. The following code is part of my implementation of Printable which prints the entire JFrame including the title bar and border. I've considered implementing Printable in the JPanel classes but then I don't know how I would get everything on one page as a single image. Is there some way to just print the contentPane of the JFrame?
     public int print(Graphics g, PageFormat pf, int pi)
          throws PrinterException {
          if (pi >= 1) {
               return Printable.NO_SUCH_PAGE;
          Graphics2D g2 = (Graphics2D) g;
          double scaleX = pf.getImageableWidth()/getWidth();
          double scaleY = pf.getImageableHeight()/getHeight();
          double scale = 1;
          g2.translate((int) pf.getImageableX(), (int) pf.getImageableY());
          if (scaleX < 1 || scaleY < 1) {
               scale = scaleX < scaleY ? scaleX : scaleY;
               g2.scale(scale,scale);
          printAll(g2);
          return Printable.PAGE_EXISTS;
     }

Thanks.
I can get the Jframe without the title bar and I can get it to drag on the desktop with your suggestions. I still need it to have rounded edges.

I am seeing funny color bars and messed up displays on my Mac

I have an iMac intel duo core desktop with OS 10.6.3 updted to 10.6.8. My colr and screen is messed up with wierd patches of color bars, jagged and distorted images. What is the problem?

Sounds like a hardware fault. Most likely the integrated video card. Take it in to an Apple Store if there's one near you and have a Genius look it over.

Want photo to print on spot color plate, not black

Have black & violet 2-color job. Want one photo to print on violet plate, but I can't get it to change... Thanks L W

Drag the swatch from the swatches panel and drop it on the photo. This
will only work with a grayscale image with no transparency.
FWIW, you'll get a better look if you open it in Photoshop and create a
duotone there or use a mixed ink in InDesign.
Bob

Stuck on moving bar and black screen?

Hi, I have a Toshiba Satellite A300 Series. Windows Vista. My laptop was working perfectly fine last night and when I woke up this morning, I turned it on and it was stuck on the Windows Corporation where the green bar is moving from left to right. I tried doing pressing F8 for safe mode and it went pass through the moving bar but then the screen turned black and all I can move is the cursor. I left it there for good hours just to see if it'll work but it stayed like that. I also tried start up repair and it said if the start up repair fixed the problem, windows should start normally. Then I clicked finish, but it still did the same, still stuck on the moving bar. It showed me a code 0x0 after the start up repair if that will help?
Any suggestions? Greatly appreciated! Thank you!

Try the solutions in this article.
What can I do if my Windows 7 or Windows Vista laptop won't start?
- Peter

Can I "print to tape" using PAL and Capture from that tape using NTSC?

I need to edit video from a video card in the PAL format somehow onto the FCE Timeline using NTSC.

This is not any where nearly as simple as it sounds. You need to standards convert the PAL material to NTSC. I'd recommend using Graeme Nattress' Standards Converter for this. Then you can edit in NTSC and record to NTSC tape.
Just to add, FCE does not accept standard definition material from a video card. It only handles AVCHD media from a video card. The only HD tape format it supports is HDV.
Message was edited by: Tom Wolsky

NEW FINAL CUT ISSUE PREVIEW DISABLED AND COLOR BARS AND NO CAPTURE ANYTHING

Well , few weeks ago I have the issue SEARCHING FOR MEDIA, I have to Downgrade all my editing computers to FCP 6.0.2, obviously I have to reinstall my OSX SYSTEM , a lot of time with no production, AND NOW a don't know what I do but when I try to capture form FCP the capture windows say : PREVIEW DISABLED, I can remote the camera and vcr, I see the TC I can log the clip but when I try to capture FCP says, NO VIDEO SIGNAL IS PRESENT, ufff THIS IS A NEW ISSUE in This Month , At this point I am very disappointment , what happened APPLE TEAM, I am not the only one with this problem, IS the Pro update the problem????, is quicktime 7.4.1 the problem, Note that " IMOVIE" capture without any kind of problem, ufff please We are worked with apple computers from 1995 and in this month looks like We worked in a Windows system.

The problem is in two machines, MacBook Pro Intel 10.5.2 and PowerPC G5 10.4.11, how is possible that two machines crashes with the same problem after software update????? Last week I have ISSUE SEARCHING FOR MEDIA, and now Preview disable, I can NOT reinstall Quicktime or System every time that apple create a software update. I try to reinstall Quicktime any times this afternoon and the problem persist, a curious tips, My Ibook G4 with old FCP 5.0.2 captures DV without any problem. Some One can tell me what is the most secure configuration today of FCP??
What Quicktime Install 7.4.1 or 7.3.1 or 7.4.5 and pro application update, or apple pro kit update??, We working in 42 TV Show , one per week, and there is not time for "Playing " to reinstall and reinstall.

Print to Tape color bars and black order

Similar Messages

Maybe you are looking for