Print-to-tape from in to out doesn't work

Hi everybody, I've a 1h45 project and I want to save a copy on a dv tape. I've to cut it in two part in order to print on 2 tapes.
My problem is that when I set "in to out" it doesn't work, despite of that, when I set "entire project" it works !!!
steve

Try it using the Edit to Tape function. Set in and out points and "edit" it to the tape using a bit of black on the head of the tape so you can set an in point on the tape.
Jerry

Similar Messages

  • Can I print to Tape from Premiere with a Black Majic Card? SDI?

    I'm trying to print to HDCAM. Is this even possible? Is there a Plug In I need?

    From what I understand you can't "print to tape" from Premiere. What you can do, is set your BM card to take output from Premiere's program monitor and record to your HDCAM that way. FYI, you'll need to turn off your Hardware enabled MPE for this work.

  • My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

    My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.  I get an error message with multiple suggestions but none of them apply to my situation.
    I am so dissatisfied with this printer.  I'm sorry I got it from Amazon because now it is a hassle to return it.  I will never buy another Canon.
    The printer menus are confusing.  I hate using it.  I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model.  Never again.  Stick with cameras.
    Marcy Hotz

    This note won't be as angry and frustrated as the last one...
    Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer.  I deleted all the old stuff.
    I also had several scanning applications on my drive which just confused me.
    When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which).  So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
    It works now.  So I'm satisfied, will keep this maching.  I just had to take some time, sit down and focus on the problem.

  • Video out doesn't work anymore

    The video out doesn't work properly any more on my G4 12inch powerbook. It had been working fine, but now it doesn't work properly with either of the mini-vga adapters that came with my powerbook. When using the mini-vga to composite/s-video, the image appears on the tv but there is no colour and the picture isn't stable at any resolution over 800 x 600.
    When connecting to a monitor or projector using the mini-vga to VGA adapter, the image appears on the screen etc but the colour is completely wrong (everything is shades of green).
    I can't think of anything that might be the problem, though I did upgrade from 10.3 to 10.4 and I'm wondering is this might be the problem??
    Thanks.

    The video out doesn't work properly any more on my G4 12inch powerbook. It had been working fine, but now it doesn't work properly with either of the mini-vga adapters that came with my powerbook. When using the mini-vga to composite/s-video, the image appears on the tv but there is no colour and the picture isn't stable at any resolution over 800 x 600.
    When connecting to a monitor or projector using the mini-vga to VGA adapter, the image appears on the screen etc but the colour is completely wrong (everything is shades of green).
    I can't think of anything that might be the problem, though I did upgrade from 10.3 to 10.4 and I'm wondering is this might be the problem??
    Thanks.

  • Photostream from PC to Ipad doesn't work

    Hello, I have installed ICloud on my Ipad en on my Windows 8 laptop. Photostream from Ipad to laptop is ok but from laptop to Ipad doesn't work.
    I have contacted Apple support but the couldn't figure it out, I tried everything: disable firewall in router and laptop, also disabeld Defender, installed a new
    ICloud, installed new OS on the Ipad, all the photo's are in the upload folder, the battery of the Ipad is 100% filled, the Wifi works ok. etc.etc. I suppose that
    there must be a wrong configuration somewhere, perhaps the Wifi must be in BootP on the Ipad or I have to enable a kind of service in the laptop or perhaps
    it is just a stupidity from me? Who has an idea?
    Thnx RJZ

    Looks like they changed how this works in iCloud Control Panel 2.0
    "On a PC with iCloud Control Panel 2.0 or later, open a Windows Explorer window. Select Photo Stream under Favorites. Open My Photo Stream. Click the "Add photos" button. Select photos to import to My Photo Stream, and then click Open."
    And here is the source:
    iCloud: Photo Stream FAQ - Support - Apple

  • I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

    I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

    Are you not seeing the icon of the app you just downloaded (it happens sometimes, and the quick fix is to reset your iPad)? Or are you running out of space on your iPad?

  • How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

    How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

    download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

  • Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

    Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
    HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
    Still doesn't work. Any ideas/similar experiences?

    Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
    Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
    The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
    The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell. 
    Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
    Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

  • Translation from CS5 to Cloud doesn't  work correct, navi and linked images are broken.

    Translation from CS5 to Cloud doesn't  work correct, <navi> and linked images are broken.
    The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

    Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
    This implies your site is not properly defined in DW.  Go to Site > Manage Sites.
    Or simply go to your other installation of DW and export the site definition file from Manage Sites.
    Save it to a flash stick or other removable drive.  Then import the STE file into your 2nd installation of  DW.
    Nancy O.

  • Alt + mouse scroll (Zoom-In/Out) doesn't work. [was: Why it doesn't work in Illustrator?]

    Alt + mouse scroll (Zoom-In/Out) doesn't work in my illustrator program.
    What should I do?

    It is a know issue, no solution for the moment.
    But Adobe is working on this see here-> http://forums.adobe.com/message/5423070#5423070

  • Bought a new iPhone 6 and synced from iTunes but vibration doesn't work.

    Bought a new iPhone 6 and synced from iTunes but vibration doesn't work. I did the reset option using side and home buttons but in vain. Please don't tell me to set up a new device coz its gonna be a hassle restoring apps, emails, contacs...etc.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Color space-creating a book in My publisher-.when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS -.My Pub is sRGB-.where is the problem?

    Color space…creating a book in My publisher….when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS ….My Pub is sRGB….where is the problem?

    I finally got to my references. This had to do with "soft proofing" on screen in Photoshop.
    So this may not help you at all. Re: Strange sRGB soft-proofing behavior  So go ahead and leave that setting at Basic.
    However there is a Color Management forum that you also go to and see if anyone has answers for your particular problem.
    Here is the link: Color management
    I hope they can help you out.
    Gene

  • TS3899 I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

    I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • I am trying to download a file from Safari. It doesn't work.

    I am trying to download a file from Safari. It doesn't work. It always comes up with a notification saying, 'Safari could not download this file'. Why does it do that? More importantly, what should I do? how do I download it?
    Thanks to the users who reply to this. It will help me a lot.

    What type of file is it?
    If safari can't natively open the file, or there is no App installed thatr can, it won't download.

  • Printing to tape from After Effects

    Hi,
    Does anyone know if I am able to print on HD cam from within After Effects, I'm using a black magic card,
    thanks for any help

    You can't print to tape directly from After Effects. You need to render to the same codec you used to capture footage, then use the same program you used to capture. Premiere Pro or Final Cut, or whatever...
    Actually, you can render to any Codec you'd like if you bring the footage back into your NLE for export or print to tape.

Maybe you are looking for