Print to tape HDV problems

I' m trying to print to tape an HDV sequence... Im printing to a Canon XHA1 camcorder but no luck...FCP see the camcorder fine but while trying to print I get a "check connection" on the camcorder monitor..any clues to what I'm doing wrong??..Thanks

Check the print to tape dialogue box and make sure you are not adding any tail leader. For some reason, this makes hdv choke-- probably because it would have to condform on the fly.
I really dislike hdv!

Similar Messages

Timecode problems when Printing to tape HDV sequence

I have a project fully edited in HDV format and I want to make a master on tape to archive. I have done this before with no problems but now I have an odd issue. After FCP has printed to tape and I review the footage on the deck (camera is the recording device). The picture is on tape and looks fine but the timecode is not function properly. Instead of running continuously it freezes and then will skip forward some. Again the picture is there and looks fine. I have switched out the decks and the tapes and tried it 5 times but with the same results. What makes this more odd is the first hour of footage runs properly and then after that the problem starts.
I played back other projects like this that I did the same way and the timecode runs correctly. This is a very odd issue and hoping someone else has seen this before and can help. Thanks!

Try exporting the sequence as a self contained movie, then try recording that. My guts say the HDV you're working with is just not allowing your CPU to keep up with it all, and TC might be where this is showing up. But a single file playing back would make things easier on your system all round, and it's lossless. File/Export/QT movie... then check on make self contained, and leave off recompress all frames. This is lossless quality wise.
Sure it's not just dirty heads or something on your recording devices? LIkely not, but it's a shot in the dark from here.
Jerry

Sony Z1 Print to video HDV problems

I researched several post on this topic and still can't get this to work. Here's my situation. I have imported and edited my HDV footage in the HDV easy set up in FCP 5. I now want to record this HDV sequence (in HDV format) back to a Sony Master tape using my Z1. I am working in a PAL environment and have dbl checked all my settings on the camera and within FCP and I still can't get the video to output. I just get a blue screen on my camera monitor. Can the Sony Z1 even record back to tape in HDV format? When I have the IN/OUT Rec setting set to HDV, REC MODE is greyed out. Only when I have this set to DV or Auto is the REC MODE open to changes. I have my camera set to VCR and the settings are these on the camera:
IN/OUT Rec: VCR HDV/DV is set to HDV (Thats what I want to record in, yes?)
REC MODE: Greyed out
Component is 1080i (Pal)
iLink is set to off
A/V to D/V Out is off
Final Cut Pro settings: (Audio Video Settings)
Summary Tab: Sequence Preset is: HDV-1080i50
Capture Preset is HDV
Device Control: Sony Firewire
AV Device Tab:
Playback Output Video: NONE
Audio: Default
"Different Output for Edit to tape/print to video" Certain settings are greyed out. On this it depends on what my camera is set to in the IN/OUT Rec setting.
Please, any suggestions would be greatly appreciated. Been trying to get this to work for days.
Tim

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

HDV Print-to-Tape problems

About a half hour into a "print to tape" from an HDV sequence to a Sony M25U HDV tape deck, I get an error message that has something to do about a specified file being locked [first issue]. Since I could not determine which file it was having a problem with I decided to render a complete self contained Quicktime and then output that.
When I try to print that to tape it skips [second problem] and it appears to do that with any rendered quicktime. I would think that FCP should have no problems with files that it rendered. This happens with multiple tape decks and FCP workstations.
Anyone else experiencing this? Any suggestions on how to resolve this?
Thanks

Cody,
I have a Z7 which should operate pretty much like the FX1. I did this about a month ago and remember struggling with it. Here are my notes, which may or may not help. It is only vague in my mind at the moment, sorry.
1. I am pretty sure when editing I had Render Control set to ProRes, as you do. When I did print to video, I copied my whole sequence, then put it into a new HDV sequence where the render was set to HDV. This took a long time--2:1 on my MacPro Dual 3GHz. I also have starred here--"When copy to HDV sequence, check titles/etc to make sure aspect ration still OK."
2. I have this part starred--"EACH TIME print to HDV tape on Z7U, go into Easy Set-up and choose HDV 1080i60. Defaults to custom which won't work."
3. Here are some more notes I took, which aren't particularly clear to me at the moment
PTV with the "Different settings" box checked and have this be HDV (1440x1080i60). That may have had to do with the fact I was using the MXO and monitoring with a second monitor. May not apply to you. I also see the note "Playback HAD been set to none".
4. Also this last note:
"Camera AV set to HDV, not 'auto' for this. Usually have on auto. Also FW out HDV-->DV is still ON, which is what need for timecode through AJA. Still seems to record into camera as HDV. Instruction book says to turn this 'off' when record HDV to tape, but seems to work either way."
Hope one of these notes helps you. If I had to pick one to try first, it would be #2. I had it starred the most
Sharon

HDV: Printing to Tape

I'm trying to print to tape from a HDV sequence and I get this error:
"The Specified file is open and in use by this or another application"
No other applications are open. I have rendered everything. No other clips or sequences are open. I have closed and re-opened FCP. I have trashed Preferences and restarted my computer. It seems everytime I try to Print to Video this error comes up at different percentage's of conforming video.
I have seen on other forums that people have had this error w/ trying to render. But I haven't found this error associated w/ any Printing to Video w/ HDV.
Any Insight?
Thanks,
-B

In my search of this matter, I found this! (I have made this change and I'm trying to print to tape once more. I'll let ya know if it works)
Error Message:
File Error: The specified file is open and in use by this or another application. (Mac OS X 10.4 Tiger and Final Cut Pro)
Translation:
If you are using Mac OS X 10.4 Tiger and Final Cut Pro, this error message may pop up from time to time. Mac OS X has a feature called Spotlight that runs in the background, indexing the files on your system to improve file searches at a later time. This error message can occur if Spotlight is indexing a folder that contains files Final Cut Pro is rendering. When Final Cut Pro renders files, it caches (the process of temporarily storing data, often in a computer’s CPU, in a location other than the hard drive so you can access it much faster) data, which can cause the error message if Spotlight is indexing in the same location.
Solution:
According to Apple, simply clicking OK solves the problem, but you can configure Spotlight so the error message doesn’t recur. In the Apple menu, select System Preferences. From the View menu, choose Spotlight and click the Privacy tab. Next, use the finder to open your Final Cut Pro Documents folder and drag the Render Files folder into Spotlight’s Prevent Spotlight From Searching These Locations area.

URGENT! Problem printing to tape

I have a Sony HDV-A1U video camera. I edited a video in FCP and I want to print the footage back to a tape. My camera is not being recognized by the computer. All my camera shows is a blue screen. My sequence is setup for HDV and my easy setup is configured for HDV. Any ideas?

You'll know some of this already but it's a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
Don't use iMovie for capturing (or printing to tape) - it doesn't give you a timecode and that's very important.
If none of the above works, then I suggest you trash our preferences. FCP gets it’s knickers in a twist from time to time and if you trash your preferences it will often sort things out (with no harm done to your project etc etc) . . .
Download FCP Rescue :
http://fcprescue.andersholck.com/
Once it’s downloaded, hit Backup first, then hit Trash. If the Trash does no good, hit Restore and everything's as it was. (Easy-Peasy)
FCP Rescue is freeware but there’s provision to make a donation if you wish – (it’s well worth it)
If you need reassurance about trashing your prefs, go to this Apple page:
http://docs.info.apple.com/article.html?artnum=302337
Or this Ken Stone page:
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

HDV print to tape? Help.

I can't seem to get my HDV sequence to print to tape. I am new to the whole HDV thing so bear with me. I am using a sony HVR-V1U.
Sequence Settings:
Frame size: 1440x1080
Pixel Aspect Ratio: HD 1440 x 1080
Editing Time Base: 29.97 (can't Change)
QT video Settings
Compressor: HDV 1080p24
When I go to print to video it says: This sequence is not compatible with print to video.
Thank you.

Well, all I can think of is, are you trying to print a whole sequence from your time line? If so, make sure the timeline window is activated, but nothing in the time line should be selected.
If you are trying to print just a portion of the time line, you can mark in and out points on the time line itself. Either way, the time line window should be the active one.
You shouldn't have to hit record on the camera; check the 'Start Recording Automatically' box in the Print to Video window.
Also, with the V1U in VCR mode, go in to the REC menu and see if the DV/HDV record in setting is set to AUTO. If it is, set it to HDV only.
Back in the Print to Video window, what happens for me is, I set everything up, and click OK. Then, the render/conform progress bar comes up for a minute; at the end of that, my Mac's screen goes black, and a dialog comes up saying everything is ready to go, and I should click OK to allow the Mac to start playing, and the camera to start recording. When I do that, the green dot and pause bars come up on the camera, which goes into standby mode; a couple of seconds later, the red record dot comes up, and it begins to record.
I don't know if I mentioned this before, but all other firewire cables should be disconnected from your Mac when you're doing this.
It sounds like you have the connection established, if you can see the color bars and slate on the camera LCD; maybe there is an issue with what you have selected in the timeline to play back.

Problems with capturing and printing-to-tape using FCP4

Having trouble logging footage and printing to video using FCP4.
1) When we log-in footage (capture) it constantly stops and says, "dropped frames". This usually happens after 10-15 minutes of logging-in footage. Why is this happening??
2) When we Print-To-Tape, it will suddenly stop! Sometimes it will continue Printing-To-Tape, but without audio!
Is this a common problem? Should we re-install FCP4?
We've done all the software updates, but we're still experiencing these problems. We've also cleared up our computer by deleting old FCP4 projects.
We have a G4 with three internal Hard Drives with approx 180GB each. We're using the Sony DSR-11 as our Mini-DV deck.
Help!!!!

We don't have Virex or Norton software in the machine. We have Disk Warrior which was helpful in the past with other problems. Should I run another check using Disk Warrior?
We only have one machine which has three internal drives. We've experienced the same problems using each of the drives.
We do have some video stored in the system drive, but normally we don't use that drive. The system drive currently has 70GB availble, as do each of the other internal drives.
We have updated our FCP to 4.5, but should we trying re-installing it?

Print to Tape problems

Keep getting the prompt "Check HDV/DV Input" when attempting to Print to Tape. My AV Devices are set to HDV(1440x1080)30p. I'm using the Canon XLH1 as a deck. Have changed firewires and rebooted. The item property of the sequence I'm trying to print is HDV 1080p30. The camera is on Mode Set HD and Frame Rate at F1, which is 30F.

I get the desktop image when I play and record to the deck.<<</div>
What are you playing? If you simply play the timeline in FCP you should get what's in your timeline recorded to your deck, not the desktop.
Any way, glad the other option worked.
rh

Preparing to Print a BIG HDV project to tape.

I have a 80mins HDV project that I'm preparing to Print to DV tape (I have 83min tapes)
Is there anything I should know to make this process flow a bit smoother?
I project is on 2 HDs.
I was thinking that I would mixdown the audio tp begin with.
The project is mostly conformed
Has anyone successfully Printed 80mins of HDV?
This is for a premiere on monday night.
I also want to run a bkup. What is the fastest way to get a usable, decent looking output?
Thanks
DP 2ghz Mac OS X (10.4.3) Visit colorsstudios.com

Honestly, a great looking image can only br achieved by outputting certain areas, then going back in to FCP and making changes. I'm sure a decent output will be achieved with a straight print to tape (that's what one would start with anyway). If you tweak it now based on what other people have found you're playing with fire. Just print it and go from there. If you have time to make changes and reconfrom and reprint, that's great, but if you start fiddling, you may get a complete failure, for which you don't have time.
As for the 95% conformed, don't trust it completely - until it is finished conforming.

Problems printing to tape

Hey I am trying to print one of my videos to tape. However I can't seem to get it to work. I don't know if I have the right settings or not.
Its HD most of it was done on a 7D and 5D but some footage is with a Canon XL H1a. I don't have a video deck but I am using my Canon Xl H1a as the deck. However I usually get an error thing that pops up saying my settings are wrong and what not and sometimes it plays but the tape doesn't record.
What am I suppose to do. How do I get this to record and print to tape? I need help any information is helpful.

I don't believe you can print HDV 1080p24 back to tape. I believe it has to be 1080i60. or 24p in a 60i stream. If your timebase is 23.98...can't do it.
But what do I know? I output to different formats. I just seem to recall someone else having this issue.
Shane

Problems printing to tape - Express HD

Hi
I am having problems exporting a movie to tape with Express – not on all projects just occasionally (and for no apparent reason I can see) and I’m finding it really puzzling.
I’ve checked easy set up option and its set to Firewire Pal Basic (I’m in the UK), refreshed video. Made sure the playback is set to high quality – and when I go through the print to tape routine the camera (canon 700i) appears to respond by moving from pause to record – but all I get is a black screen on the camera whilst the exporting movie appears on the Mac monitor.
Anybody got any clues – is there something I’m missing?
Many thanks for your help
John

I Print to Video using the "easy setup" : Apple Basic Firewire.
I import using "Apple - DV Converter". Seems strange that I have to switch setups depending on Inforamtion direction. {the two setups are adjacent in the easy setup menu, NTSC}.
Works both with tape and with a DVD recorder.
Discovered this by trial and err. Hope you spent less time than I did.
-wbajr tbc
My converter is an old ADVC 100 circa '03.
I was wondering if the ADVC 110 experiences the same "feature" or if there are any converters that don't need this "swap". Will ask as a separate post.
eMac DVD Mac OS X (10.4.5)

Minimum Mac G5 for HDV print to tape

Hi all,
I've been trying to print to tape my first HDV timeline. The error message reads, "Unable to perform print to video operation for HDV as RT Extreme is not supported. Improved CPU Speed and/or RAM needed to enable RT Extreme and HDV Print to Video".
So my questions are, is there any way to turn off RT Extreme? Is my iMac G5 2.0 ghz, 512mb ram insufficient for this operation? Perhaps boosting the ram could eleviate this issue? Does anyone know the minimum Mac requirement for outputting from FCP5.
On a side note, I was able to export the clip, the reimport it into iMovie HD, but I am having an issue with a black bar on the left of the screen in iMovie which I have also posted on that board looking for answers....

Try turning on Safe in the RT settings in the top left corner of the Timeline Window.
And render everything.
Jerry

Can the Sony HDV A1p print to tape?

Hi Guys,
I know there are may posts about HDV and printing to tape but I have not been able to find a specific answer to this question - can the A1p, the little sister of the Z1p, be used if you want to print to tape?
I plan to buy the Black Magic Intensity Pro (unless someone screams it's a bad idea) so hopefully a lot of the HDV issues will be side stepped but in the mean time...
Has anyone managed to PTT with the A1P? What settings did you use (camera/suite)? I am Pal 1050i if that makes any difference.
I just want to hear that one lone voice saying yes - I have done it.

No reply but I sorted it out. When you've got all your settings right (easy setup) and the plugs in the right slots and have refreshed the A/V devices and set the print to tape ready to go then it will only show the image in the camera viewfinder when you are actually recording (using record control in the play/edit mode.

Problem printing to tape...

I searched for this particular problem and I couldn't find anything...
So after a late night session of nearly having a heart attack, I managed to find a full quality QT version of my project...It plays anamorphic and exports for DVD pro just fine...But when I go to print to tape, it cuts off the left side of the screen...I checked the monitor and it plays like that in both my monitor AND my camera...Any suggestions?

Really? THANKS!

Print to tape HDV problems

Similar Messages

Maybe you are looking for