Print to Video does not work with Firewire 800 to 400 cable

I need to print video from a Mac Pro with only Firewire 800 port to a Sony DSR 50 with only Firewire 400 port. I'm using a Firewire 800 to 400 cable and I also tried a 400 cable with a 400 to 800 adapter attached. I'm able to control the Sony deck but I cannot get any audio/video to it.
Anyone else have this problem?

When you've got the deck connected and in fcp you go to view: videoplayback, do you see the appropriate apple firewire option available and chosen? And if you hit command-F12 (show all frames) do you see anything? If it doesn't work, try restarting the computer with the deck remaining on.

Similar Messages

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Print to Video Does not Work

I am running Final Cut pro 5. I am trying to send my time line to a mindv deck using print to video. I have a monitor hooked up to the deck to watch what is being recorded. I set my in and out points in the time line and and select print to video from the menu. I do not have any of the boxes checked, because i have black and color bars already in my time line. I select in/out and hit ok. The screen goes black and my video shows up in the middle playing, but nothing shows up on my monitor and when i watch the tape that i am recording to, there is nothing on there as well. The device control is working, because I can capture footage off of the deck, but it seems to not be getting a signal when I am trying to print to tape. I have also tried edit to tape, and I press record on the deck after setting up the sequence and then I play the sequence, and nothing is still recorded onto the tape. For both edit to tape and print to tape, everything is working, but nothing is being recorded onto the tape. I have also tried hooking up my sony camera to be used to record, but that doesn't work either. Any help would be great thanks!
G5 Mac OS X (10.3.9)

Make sure the deck has it's input selection set to firewire for starters...
I'm not clear if this is part of the problem, but FCP 5.0.4 will run better in Tiger.
But if you can see external video, you should also be able to print to video or edit to tape... if you can't then keep troubleshooting your Firewire connection... got a different cable to try? Can you capture video OK?
Jerry

Canon Gl2 Video Camera Not Recognized with Firewire 800 Connection

I have a late 2010 mac with 2.93 Ghz Intel Core i7 Processor with 12GB DDR3 running 10.8.2 OSX. I have a Canon GL2 video camcorder with a MiniDV tape I am trying to download to my computer. I am using a new 4pin to 9pin Rocketfish Firewire 800 cable. My computer is not recognizing the firewire input from the GL2. As suggested with other support threads, I have tried to turn the mac and computer off and on, as well as check to see if the cable is working. I have also tried both a trial version of Final Cut, and Imovie 09 which is loaded on my Mac, neither of which will recognize the camera. I clicked on the System Information icon and looked at the Firewire 800 status which was:
FireWire Bus:
Warning: Unable to list FireWire devices.
Maximum Speed: Up to 800 Mb/sec
At least I know it recognized something. I have also checked to make sure the Canon is set to DV-Out on the Menu. Since I am unable to use a USB connector with MiniDV, would there be any other way to either A) Download the video to the computer, or B) get the Mac to recognize the source plugged into the Firewire? Any help with this would be excellent.

I believe that in order to be recognized, you have to start the process from within iMovie of Final Cut; as for your FW port, you can try these two different troubleshooting steps (may or may not work, but won't hurt):
Reset SMC:
http://support.apple.com/kb/HT3964
PRAM:
http://support.apple.com/kb/HT1379
It may that your FW port is defective; it that turns out to be the problem, I hope you purchased Applecare because those ports are an integral part of the logic board, so that would have to be replaced ($$$).
Since your footage is on DV tapes, you do need the FW to transfer it or it will not work. One other (involved) way would be to transfer your footage to a DVD if you have a DVD recorder and then get it on the Mac from there.

Photoshop CS5 Print Settings button does not work

Photoshop CS5 (updated to newest version 12.0.4) Print Settings button does nothing regardless of printer requested. Does not work with either an HP1102w or a Cannon Pro9000 Mark II. I have deleted printers and reinstalled but it still doesn't work. Using a Mac Mini with OS 10.7.5
Message was edited by: HCASED

Received this from Black Magic:
From: Albert Chu [[email protected]]
Sent: Friday, April 03, 2009 7:11 PM
Subject: Re: For Albert: ISSUE: Playback Settings button in BlackMagic (Intensity Pro) project not working
Importance: High
Hello Joe,
Funny enough, I was just about to run this test and happened to check with another tech about this. Apparently another customer had gotten in touch with us regarding the same issue and after confirming this, found that it is a bug. As such, this has been logged and we should hopefully see a fix for it in our future updates.
Please continue to check our software downloads page for this update (we do an update roughly every 6 to 8 weeks). Thanks for your patience.
Regards,
Albert Chu
Support Engineer
Blackmagic Design Inc.
www.blackmagic-design.com

Playing Slowmotion video over airplay does not work with ios update!!!!!

after upgrading last ios , airplay to shoot slowmotion video does not work.
I was expecting it to be fixed with recent update, but still not working!!!
I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
or apple should give downgrade option at least.
FIx it, fix it, fix it!
Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i am quite disappointed with my purchsing ipad air 2.

As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

My cannon printer worked with snow leopard but does not work with Lion

My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

Have you downloaded and installed the latest Canon printer drivers?
http://support.apple.com/kb/DL899

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

My HP photo smart C6280 printer does not work with CS6. Any Help?

My HP photo smart C6280 printer does not work with CS6. Any Help?

How does it "not work"?
What OS version are you using?

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

Video does not work in iOS 8.3

I have the iPhone 6 128GB. I did update to iOS 8.3.
I have some problems after the update... video does not work, it wont play, i can click on the play button but nothing happens.
The problem ocurs in safari when i visit news sites and try to play video in articles.
When i get snapchat with video... it wont play, it is only black screen with the seconds counting down... and some times it just craches the snap app...
I cant watch videos in instagram or facebook...
I live in Norway and I think it is stupid that Apple still has not fixed the keyboard... the "123" key and the "globe" key swithc place with each other in portrait and landscape mode... why...!?! ( this is when i use Norwegian keyboard )
Yes i have rebooted the phone holding in both buttons until apple logo is visible 2 times
Yes i have rebooted the phone even more
Yes i have quitted the apps that was open and the only way i get the black screen away in snapchat is by killing the App...
Apple... i am not impressed.

Here is the strangest thing, what works for you does not necessarily help other. I rebooted my phone several times, and yes, youtube finally worked, but only for some hours then it did not work. I did quit all Apps and rebooted with home and power button pressed inn until apple logo appeared and disappeared again, i had to press power to start the phone. I repeated this step. Now the videos where playing in all apps. The next morning i did get a snap on my iPhone, i tried to see it, but it was only black screen with text and a clock counted down to 0, but it stopped on 1... and the app froze.
I dubble clicked the home button, and there where 25 active apps, apps that i had not used for days and note... i manually quitted all apps the day before... how did this apps appear again ? The Apps that where terminated do appear again after reboot... i don't know why, i have still trouble to see video. I hope for a fix from Apple, because i have so much i don't want to loose in my phone.

Print to Video does not work with Firewire 800 to 400 cable

Similar Messages

Maybe you are looking for