Print to Video; Screen All Messed Up

My screen is stuck, displaying a large rectangular checkerboard with a 2 inch black border. Here's how it got to this state:
1. I had done a Print to Video, and when it finished up, instead of the message displaying that it is OK to start recording, my screen went black. I waited. For a couple of minutes. Hit the space bar, hit enter, hit delete, nothing.
2. So I turned off the computer. It entered sleep mode, which I had turned off long ago.
3. I turned the compter back on. Black screen still. Hit Escape.
4. Black screen turned into the checkerboard, and I don't know what to do.
Help!

Shutdown the Mac and re-boot.
If it doesn't want to shut off by the menu. Push and hold the power button untill it does.
If it's still wrong after this delete the FCE preferences.
Al

Similar Messages

  • Upgraded Itunes now videos are all messed up

    When I upgraded itunes tonight and plugged my ipod back in, somehow my videos are all labeled as songs and are taken out of the video section and put into the song section..and when I play it it just plays the audio and not the video and the TV icon is removed in my library..
    does anyone know how to fix this without having to reload them because that is a pain!
    Thanks!

    Quote from: Richard on 26-May-06, 08:02:50
    JMMD,
    Check the RAM and CPU Voltage and check the timings on your RAM.
    I would then load the latest nVidia nForce & ForceWare Drivers
    Take Care,
    Richard
    I'll check all the settings again but they looked fine when I glanced at them. I basically always left everything at default.
    Would I need to reload them (Nforce and Forceware) if they're already installed? If so, I'll give that a shot.
    Quote
    Did you take note of all your setting before flashing?
    Did you make sure all the settings were correct after the flash?
    Did you try a complete CMOS clear and set all the settings back again?
    I never really changed any of the settings. I'll check them again but they were basically all defaults or auto.

  • .mac mail screen all messed up preference button does not work

    in My .mac mail account on the web. The screen is sooooo spread out and big nothing will work. no buttons at all
    can't change anything help....

    If possible, could one or both of you take a
    screenshot* and upload it somewhere so we could see
    it?
    In the meantime, I would suggest going to the Safari
    menu and selecting Empty Cache... If that doesn't
    work, then Reset Safari, which is also under the
    Safari menu.
    Other than that, the <A
    href=""http://docs.info.apple.com/article.html?artnum=
    107657">steps in this article may help out.
    * To take a screenshot, press Command-Shift-3 at the
    same time. The screenshot will be saved as Picture
    (#).png on your Desktop, where # represents some
    number.
    Thank you sooo much. Resetting Safari worked for me. I will read the article you recommended too.

  • Iphone 6 + screen all messed up after replacement done by Apple

    so i had my screen replaced about a month ago by apple because I dropped it and it was shattered like cut my finger if I tried to use it "shattered" but lately the top of the screen has been flickering all weird and it's not responding to my touch /: if I take it back to them will they charge me again?

    Your phone is still under warranty.  If whatever is causing your problem is NOT related to dropping the phone, it will again be replaced.  Bring it to Apple and see what they say.

  • MY videoes are all messed UP!!

    Premier is screwing up my videoes!!!*&%#@
    THEY play JUST FINE in my phone SO premier is deafenately MY problem.
    How Can I FIX THIS!!!

    I just reviewed a few files from a flight I took over the San Francisco Bay in a small plane with my Samsung Galaxy S2.  Most clips are 29.97 but some vary.
    I put the one that said it was 30.01 on a 29.97 sequence and it looked fine. Then, just to make sure, I interpreted it to 29.97 and it still looked fine.
    There was lots of motion and some shots were bright (outside of plane) and some were rather dark (inside of plane).
    So either variable frame rate is not as big a problem as stated, or it depends on the type of footage or the model of phone. I admit I was not trying to sync sound. The noise of the engine pretty much drowned out anything else.

  • 50i ... 60i?? Print to video complications

    Hello!
    I am trying to edit broadcast quality news items but have recently come across a little trouble. Usually I film on a JVC 101 HD camera in SD and ingest my footage into my laptop and go from there. Filmed in 50i, printed to video back into the JVC in 50i. No problem.
    Now, needing some footage from an SX tape I dumped it onto a DV tape using a DV deck. I then ingested this footage into the computer. Nothing seemed amiss until I printed my edited sequence back into the camera. When I do this it works for a few seconds before flashing up on the camera '60i invalid!', then stopping. When the shots from the DV deck are placed with any footage straight from my camera it does the same thing everytime the DV deck shots come up. '60i invalid!'
    What is going on?! I was under the assumption that 60i meant NTSC. Everything we do is in PAL. The DV deck is regularly used with no reported problems but it's only this footage I'm having problem printed to video!
    Any help would be most appreciated.
    mac book pro    
    mac book pro    

    All settings and sequneces are in PAL. I did some more stuff today with footage straight from the camera and it was all good.
    When you watch the deck footage back on the camera it reads 50i. However, it still reads '60i invalid' when you print to video. All the format details are the same as my other working footage too. It's just a puzzle. I think I'm just going to have to try some different settings on the dv deck and hope for the best.
    Thanks for the help, guys.

  • Just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?

    just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?

    Adds the ability to make and receive FaceTime audio calls
    Adds call waiting support for FaceTime audio and video calls
    Adds the ability to block incoming iMessages from individual senders
    Improves the accuracy of unread counts in Mail
    Resolves an issue that prevented Mail from receiving new messages from certain providers
    Improves AutoFill compatibility in Safari
    Fixes an issue that may cause audio distortion on certain Macs
    Improves reliability when connecting to a file server using SMB2
    Fixes an issue that may cause VPN connections to disconnect
    Improves VoiceOver navigation in Mail and Finder
    Provides a fix for SSL connection verification
    this was the update
    never said anything about the screen

  • How can I get all the print on my screen to be larger?

    How can I get all of the print on my screen to be larger?

    Thank you for helping me with the size of the print on my screen. The suggestion you made works well with the email font. I really wanted all the print on my computer to be larger. (Some of the print seems to be way too small.) Someone suggested I change the resolution settings. I did this, and changed it to 1024 X 640. That changed the size of the font on the toolbar at the top of the page, and that is what I really wanted, as well as all the other print on my screen. Nonetheless, I would like to thank you for your very helpful and prompt reply to my question.
    Sincerely,
    Wayne10

  • Hp photosmart wireless e-all-in-o​ne b 110 series printer on main screen says ink system failure

      hp photosmart wireless e-all-in-one b 110 series printer on main screen says ink system failure

    Hi,
    In order to troubleshoot the problem. please follow the steps listed under '0xc19a0013' or no code displays with the 'Ink System Failure' error message below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01458034&cc=us&dlc=en&lc=en&product=4022343&tmp​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I am unable to print any screen on Firefox. My printer works fine on all other requirements.

    My printer does not respond to a print request when I attempt to print a downloaded screen on Firefox. It prints all other documents, emails etc with no problem.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • My screen is all messed up

    Help please, my screen is all messed up. the colors are like oppisite of what they usually are. like when i am typing right now the apple website is black and like the desktop picture which is the default picture is orange. Please Someone help me. PLEASE PLEASE PLEASE!!!!!!!!!!
    iBook G4   Mac OS X (10.4.2)  

    Go to System Preferences>Universal Access and click on Switch to Black On White.
    John

  • "Incompatible Compression Settings" all of a sudden when printing to video

    Yesterday all went fine...tried to print to video again today (same project) and got an "incompatible compression settings" error message. I've changed nothing. All was fine yesterday...any clue?

    As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

  • My screen is all messed up. Letters are big and don't fit correctly. Please help

    My screen is all messed up. Letters are big and doens't fit correctly. Please help!

    Is Zoom turned on?
    if so, press  command + option + 8.
    If that does not help, try resetting PRAM.
    Reset PRAM:   http://support.apple.com/kb/PH14222

  • My screen is all messed up! Please Help

    MacBook Pro
    Retina, 13-inch, Late 2013
    Processor: 2.6 GHz Intel Core i5
    Memory: 8 GB 1600 MHz DDR3
    Graphics: Intel Iris 1024 MB
    Software: OS X 10.9.2
    I opened my laptop today and the bottom of the screen is all messed up and at the side there are like green, red lines...
    why is it like this? (BY THE WAY, I USE AN HDMI CABLE TO EXTEND MY DISPLAY ON TO MY TV) Maybe that's why? I just remove the HDMI cable after I'm done -- there is no 'safe remove')

    Reset PRAM.  http://support.apple.com/kb/PH14222
    If this does not help, contact Apple.

  • Printing from my mailbox, it prints very tiny and all on left side of screen onto several pages?

    for a couple months now anytime I print something from my mail it prints very small and all to the left hand side of the paper and prints several pages, if I open and read from Internet Explorer it prints just fine? Now I am having problems with my facebook page also????

    Adjust the print scale: File > Page Setup > "Format & Options": Scale
    * http://kb.mozillazine.org/Problems_printing_web_pages

Maybe you are looking for

  • Looking for an app the play iTunes TV shows.

    Hi, I'm looking for an app that play iTunes TV shows.  In iOs 7 its no longer possible, well it is, but every 11 minutes you have to get up and press the next tv show - if you find the next one, under ios6 it will automatically play the next show in

  • Requirement list should be Populated in MD04 When FIXED QTY/DATE activation In credit limit exceeded

    Dear sd experts I Have one Business requirement But i dont know how to achieve Please share Your ides Generally once any document is blocked due to credit limit .. we can release in VKM3 But in my business process For some sales orders we have mainta

  • Java.Lang.NullPOinterException when bursting with dataTemplate

    Hi, I'm trying to burst using 10.1.3.3 with a dataTemplate. The following forum message states that this doesn't work, but I can't see a bug logged anywhere in the bug database: Re: bursting Does anyone know if this is true, and that it doesn't work

  • JTextArea within a JScrollPane

    Hi! I've searched through the Project Swing archive and found lots of questions regarding how you ensure that when text is entered into a JTextArea control (via the append() method) the JScrollPane automatically scrolls to the position where the text

  • Oracle RCM v. RAC for eBusiness suite

    Hello, We're about to install Oracle eBusiness, and one strong user requirement is that OLTP is no way degraded by BATCH activity that may run simultaneously. The choice is currently between: a) 1 LPAR (4CPU/16Gb memory) servicing both OLTP and BATCH