Print Too Small from Photoshop CS4 with HP 8500 All In One Printer

I'm running Windows XP with CS4 and latest patches and drivers.  When I print an image to my HP 8500 All in one printer, the printout is too small.  Instead of a centered 4 x 6 image on the page I get a 1 x 1-1/4 inch small print of the image in the upper left hand corner.
I re-installed CS3 and it works perfectly as do any other print options, such as word, etc.  But from Photoshop CS4 I can find no way to print to this printer without the image shrinking in size.  If I print to another printer at the same sitting, the image is fine.  So it's a PS CS4 vs. HP 8500 unique problem I guess.
I've see this post in other forms and no help as yet.  Does anyone have this one on their radar.  I really like this printer, but it's quite annoying.
By the way, If I print to a PDF from PS CS4, the pdf file image is fine.  That's another end around for printing also. HMMMM.
I did contact HP and they put the problem squarely back on Adobe.  No partnership there.
Thanks,
Glen

Will the printer print from any app?
I know it sounds like a dumb question, but you didn't actually say...  And I admit to looking for software problems on an occasion or two when I had forgotten to plug in cables. 
-Noel

Similar Messages

  • I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

    I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

    never assume or assume their advice works out of the box
    install the drivers that they sate is the latests on their site!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=dk &prodNameId=21861&prodTypeId=18972&prodSeriesId=27901&swLang=8&taskId=135&swEnvO ID=4082

  • IPod Touch conflict with HP 6500 All-in-One printer...

    Does anyone know of anyone who has an iPod Touch installed with an HP all-in-one printer and running under Windows 7 64 bit? If so I'd like to hear from them and see if I can pick their brains a bit. In fact, I'd like to hear from anyone who has an iPod Touch working with an HP all-in-one on a desktop system, no matter the OS.
    Originally I tried to get them to work together under a 32 bit Windows 7 Premium build on an MSI G31M3-F V2 mobo but couldn't get the iPod and the All-in-One to work together. Either the iPod wouldn't synch or the printer would disconnect.
    Yesterday I started with a Windows 7 Ultimate 64 bit build on an Asus P5Q-EM mobo with just the HP 6500 All-in-One and the printer and all of its functions were working perfectly.
    Then I plugged in the iPod, after having installed the newest 64 bit version of iTunes, and it detected the device but wouldn't complete the driver installation. I powered down the HP 6500 and the iPod installation completed.
    I then turned the printer on and it appeared to work but the iPod wouldn't complete the sync process unless I turned the printer off.
    Then I changed the drive letter of the HP all-in-one's integrated card reader from "E:" to "G:" and rebooted and it appeared that everything was working. I brought the scanner up but didn't actually scan anything but, still, no disconnect messages. Finally, success I thought. Silly me...
    Today my daughter tried to send a fax from the computer. It started the scan, stopped after only partially scanning and said that the printer was disconnected.
    She then rebooted and tried to scan a photo and it did essentailly the same thing -- a partial scan, froze, and then reported the printer offline.
    Uninstalling the iPod Touch device resulted in the printer coming back online and all functions working perfectly.
    There is clearly a conflict at the device/driver assignment level and I don't know if its even anything that I can fix.
    This should not be this hard.
    Has anyone any experience with the iPod Touch running on a desktop that also has an HP All-in-One device installed?

    Finally installed a completely new OS and then, before doing anything else, installed iTunes and connected the iPod. Installed everything else with the HP printer being the very last thing.
    Wa La... Worked as advertised...

  • Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

    3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ  I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear?  (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

    Hey ,  Thanks for posting in the HP Support Forum.  I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality.  I would like to help you with this but that particular part is not replaceable.  I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards, 

  • Photoshop CS4 and printing with HP 8500 All in one

    I have problems with printing direct from Photoshop CS4, then I look in the "Page setup" it looks fine - then I press "Print" - "Scale to Fit media" - "Print..." the images only fill 10% of the paper. The printer is by default ( I have tjek it in the setup ) set to "A4" paper format -
    Everything else i print from MS Word, MS Excel looks fine
    Steen Mikkelsen

    John Joslin wrote:
    Right click > Open Image in new tab – click to magnify.
    Easy peasy!  
    Yeah for John ! Never thought of that shortcut. I think you meant right click - 'open link' in new tab ? I don't have the option 'open image in new tab'. Thanks, I was using Chrome @ the time, which unfortunately doesn't have this option, yet.

  • Trouble with findig printer with Bonjour (HP all in one printer)

    Hi,
    I have a problem with connecting to my HP Printer.
    When the printer and the iMac is booted freshly I can connect to the printer without any problems, also I can find the printer trought the printer browser via Bonjour.
    But after a while the connection is completely lost with the printer, the only way I can connect to the printer is by IP, the dns name (http://HPxxxx.local.) is also not working anymore.
    The only solution is turning off the printer and putting it on again, even sometimes I have to restart the iMac.
    Is it possible a new installed wireless modem/router is cousing this odd behaviour ? Because it looked like the trouble whas coming after the new router was installed.
    When I ping to the printer I can see there are some timeouts from time to time and when the timeouts take too long, the result is that I can't find the printer trough Bonjour anymore.
    Thanks!

    Hi cowla1, 
    I understand you need the drivers for the HP 6500A on a Mac. I can help you but will need some more information.
    I have provided a link for the drivers up to 10.8. The 10.9 drivers show the documentation to run the Apple Updates for the driver install. HP Officejet 6500A e-All-in-One Printer - E710a Drivers.
    Select your operating system, click next and click on the software to download and install.
    Make sure when you add the printer, it shows the printer name and not the printer name + Airprint.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Ethernet/Wireless)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Power problem with my 4620 all in one printer / scanner / fax

    Hi,
    My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
    Scenario:
    The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
    My solution, I have to disconnect the power supply from the printer,  then reconnect and then press the Power On button.
    This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
    Any ideas?
    Thank you in advance!!

    maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
    found doing a quick search of the forum
    all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
    JGG

  • How to print from iPad on hp photosmart c7250 all in one printer using wi fi?

    I want to print  from my iPad mini to a HP photosmartC7250 all in one printer using wi fi, please.

    You need a third party printing app or an app that lets your computer act as the print server. Your printer is not an AirPrint printer from what I can see. You can double check here.
    http://support.apple.com/kb/ht4356
    Printopia for the Mac or Fingerprint for Windows will let you use the computer as the print server.
    http://www.ecamm.com/mac/printopia/
    https://www.collobos.com/
    Printing apps for iPad
    http://appadvice.com/appguides/show/printing

  • Ink Cartridge problem with the 7525 all in one printer

    I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged.  also the ink levels on the new cartridges are not appearing full.  they are all  new HP cartridges.

    The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Airprint with HP C4180 All-in-one Printer

    I am currently thinking about upgrading my iPhone 3GS to the 4.2 software and undecided. If I do so, would I be able to print from iPhone to my HPC4180 All-in-one Printer?
    In order to use Airprint, do you have to have an Airport?
    Thanks in advance.
    Message was edited by: itsybitsyskier

    I think this page has the answers you are looking for:
    http://support.apple.com/kb/ht4356

  • Printing with HP PSC1210 All in one printer

    Hello all,
    Anyone out there had any luck finding a driver for the HP PSC1210xi all in one printer with Snow Leopard? I had basic printing functionality under Leopard and would just like to have the same under Snow Leopard. As a workaround, I am able to still print and scan just fine using Windows XP running in VMWare Fusion, so, I am not dead in the water. However, I would like to just get basic printing capability restored in Snow Leopard.
    Thanks all.

    OK, so I have some bad news. FIrst, unfortunately the print drivers for the PSC1210 are not available yet. They will be available at some point in the future through an Apple Software Update. Second, since HP never posted a 10.5 driver package for your device, there is nothing for you to download to try to get things at least functioning.
    That being said, you may have some luck with the Gutenprint drivers or others. There isn't a driver specifically for the PSC 1210, but the one for the PSC 1215 may work.
    HP is aware of the problem, and I know I am trying to do everything in my power to solve it as soon as possible.
    Just trying to help.
    Andrew

  • Printer: Driver Update Problem with HP 6700 All In One Printer

    My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?

    Hi,
    I request you to try the following:
    For network connection:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
     For USB:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Say thanks by clicking the "
    Kudos! Thumps Up" which is on the right
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
    Regards,
    Ray

  • I am not able to connect with my Epson all in one printer

    I am having Epson All in one printer which is being installed on my HP notebook.  However, i am not able to print from this notebood as it says communication port is not available.  I am able to scan, but can't able to print.  My operating system is Windows 7 home edition. Please help me to resolve the issue.

    What happens when you try?

  • HT3669 can I use PRIZMO with Lexmark Pro901 all in one printer scaner?

    EVER SINCE I PURCHASED A LEXMARK PRO901 ALL IN ONE PRINTER I HAVE HAD NOTHING BUT PROBLEMS EVERYTIME I DO AN UP DATE ON MY MAC OR LEXMARK PRINTER THE SACNNER FAILES TO WORK I PURCHASED THIS PRINTER BECAUSE I WAS TOLD I COULD EDIT DOCUMENTS I SCAN USING OCR BUT THIS HAD NOT BEEN THE CASE MOST RECENTLY I AM TOLD LEXMAR WILL NOT WORK WITH OSX 10.8 SO NOT MY ALL IN ONE PRINTER IS A PRINTER THAT IS USLESS TO ME.

    Which printer drivers are you using? I had a real problem with one of these after an upgrade to 10.4.3 that required an archive & install of the OS and a reinstall of the printer and scanner drivers before it would work properly so I suggest you try that first.

  • HP Officejet Pro 8500 all-in-one printer - issues after upgrading to Windows 8.1

    After successfully downloading a driver from the HP website to enable using this all-in-one printer with a new HP laptop using a Windows 8.1 OS, I confirmed that the printing function works normally (just as it did with a Windows XP OS on my wireless home network).
    However, I don't find any icons appearing on the 8.1 desktop for other HP apps (e.g. HP Solution Center, HP Photo Creations). I do have an icon for the Printer. When opened, it shows two options: 1) add a new printer and 2) add new software (from the original CD). But the original CD is for the XP OS, which I don't try and possibly mess up what already is working.
    So-o-o, Is there any HP software download available for HP apps to use with this printer, especially HP Solutions Center?

    Hi Riley.
    You can get HP Photo Creations here:
    www.hp.com/go/hppc
    It's a free download for Mac and Windows.
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

Maybe you are looking for

  • No WIFI after iOS 7 upgrade on iPhone 4s!

    Dear Apple et al, Like scores of other Apple customers, since upgrading from iOS 6 to 7 on my iPhone 4s, I have completely lost WIFI capability and experienced slower GUI performance in general. I have explored all other options including consulting

  • How to create a generic method?

    Hi,   I am using a std task TS01200205 to create instance for a BOR object. There are 2 key fields. I want to pass these 2 to the ObjectKey field. As for as I know, we have to concatenate these two Keyfields and assign it to 'Object Key' parameter.  

  • Resizing Brochure to different paper sizes

    I have created a brochure using an Apple template and have my paper size as 8.5 x 11.  However, since each page in the template is 2 actual pages, when I go to print, the brochure is half the size.  When I try and resize the page, the brochure image

  • WAD - Back one Navigation step

    Hi All, Our reports are created on WAD, and we have a requirement to provide the back one navigation step functionality. When we do any filter criteria on the row fields, then the back one navigation step is working. But when i drag free charcteristi

  • Help! Cannot get Twitter Widget to Work!

    Hello, I am running Adobe Captivate 6 on a Mac. i have MAMP installed and followed the Twitter Widget installation guide here: http://help.adobe.com/en_US/captivate/cp/using/WSedb8e841cbc0b796-1c6e 5ece129f9bd28c5-8000.html When I preview my project