Print URL at top/ bottom of page is too small & half off the page

I set it to print URL and Title at top of the page, and Date at the bottom of the page. It attempts to do this but the print is verrry small and 1/2 off the page.
Works fine with Google Chrome.
New WF 2540 printer, test page is good.
Mac 10X
Thanks for your help!
Peter

Hi phstol, entering a value in about:config isn't very technically demanding and takes less than 60 seconds. You just need to take a deep breath when you see that long list of settings and focus in on the ones you want to change. Double-click and you can enter a number like 20 or 25. I'd try the top and bottom print edges first and see whether that makes any difference. (Hopefully you have a PDF printer driver so the experiments don't waste too much paper.) Good luck.

Similar Messages

What to do if my master page is too small for custom master page column, I need to change the papers

What to do if my master page is too small for custom master page column, I need to change the papersize from A4 to US letter size *

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

Normal screen till I downloaded 5, now everything is to the right and half off the page sorry I downloaded

Very cross as I now have half a page on my screen every time I log on. If I click on the bottom right it will go back to normal after a few attempts but, this is not how I want to work. I was happy with Firefox till this happened I am sorry I downloaded version 5. Just aggro.

Please confirm what Mac this is - this is the iMac (Intel) community, but your profile says Mac Pro.
If the latter, provide some info about the monitor.

When I print a web page, how do I adjust the printe margins so that the headers and footers don't fall off the page?

I have looked for a way to adjust the page margins for printing, but can't find it. I have found where to adjust what prints in the header and the footer. When I print, the headers and footers are so close to the edge, and sometimes half off the page edge at the top and the bottom, that I can't really read them. This didn't happen in the past. Maybe this has changed since the last update - I'm not sure. Is there a way that I can fix this, so that my headers and footers are readable?
Thanks.

Someone else reported this sound last September, but there wasn't any resolution to that thread: [https://support.mozilla.org/en-US/questions/938003 After upgrading to Snow Leopard on my Mac, Firefox makes typewriter or paper crinkling sounds when going to links and sites].
Does it seem to be at all related to whether pages use Flash? Just wondering whether it is some kind of notification sound related to Flash's capabilities of using the webcam and microphone.

Printing half on and half off the paper

We purchased the HP Photosmart 6510 yesterday. While the unit will print, it is printing the image half on the page and half off the page on 5x7 paper. How do we get it to consistently print to the center of the sheet so that I am not wasting any more paper?
The 4x6 paper will not print at all- it will only jam and destroy the paper.
Paper type: invitation weight matte paper being fed from the photo tray. Ironically, the 3.5 x 5 images all printed perfectly.
Anyone? Help!

Hi - A couple of things to check. First, make sure that the paper size in both the printer driver (File, Print, Preferences) and the app you're printing from are both set to the appropriate paper size. I'm assuming that is the case if it prints fine on 3.5x5, but can't hurt to double check. Second, sometimes there can be an accumulation of dust on the rollers that can cause the pick rollers to slip initially. Try cleaning those by following the steps in this document. This isn't normal for a new printer, but worth a try.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

My report is printing half of the page when I print the report Hp psc 1315

My report is printing half of the page when I print the report in this printer
Hp psc 1315 all in-one and when the operating system is windows xp , but when
I run the same report in windows me , and the same printer it is running well
And my report version is :
Report Builder 6.0.8.23.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.20.0
waiting for your valuable answer .
Best regards
Jamil alshaibani

i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
please help
betst regards
jamil alshaibani

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Aperature always prints off the page

Every time I try to print a photo in Aperture, it prints partly off the page. Doesn't matter how I set up the page. Aperture is the ONLY program that has this problem. Any suggestions?

This issue has been reported in the discussion many times, we have to hope Apple are working on a fix.

For printing: Is it possible to organize the address book in columns to save space in printed page? Otherwise the right half of the page remains empty.

In the old Outlook Express it was possible to organize the address book printed page in double columns so you don't need to waist half of the page leaving empty areas. I can't find the way to do it in thunderbird. Thanks for your help.

I don't have a calendar to test this, but you may have some success following these instructions:
https://kb.wisc.edu/helpdesk/page.php?id=22769

HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI???

Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??

Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.

Changing my page size from American A4 to UK A4 shifts everything on the page, if I want everything on the page to stick to the top left rather than shift around, what do I do?

Changing my page size from American A4 to UK A4 shifts everything on the page, if I want everything on the page to stick to the top left rather than shift to the right and down, what do I do?
Using Indesign CS6.

@Gabrielle – if you change the size in your document setup, pages always crop from the center of your spread, if you are using facing pages:
Uwe

The default print size on Pages is too small - how can I program it to be larger?

The default type size in Pages is too small - can I permanently size is larger? Thank you.

Hi Ellis,
When you say the default font size, is this set by the template you use for a new document? If so, create your own. Open a blank template, set the font size, and Save as Template... with a new name.
In Pages > Preferences > General > For new Documents > Use Template.
Choose your template. When you open Pages, it will open that template.
File > New will also open that template.
The font of a document from someone else has been set by the author of that document. You will have to change it.
Also, have a look at View > Zoom. Perhaps the font is not small, but your view of the page is small.
Regards,
Ian

How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

Click at bottom of the first page:
Menu > Insert > Section break
Click somewhere in the 2nd page (not the header/footer)
Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
Click into the header or footer of the second page:
Menu > Insert > Auto Page Numbers…
If there is anything in the header or footer on the first page that you don't want just select it and delete it.
If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
Peter

I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
Thanks again

Data merge objects spilling off the page

I'm doing a data merge with multiple records per page-there are supposed to be six 4x3 inch nametages per page. I created the master page with
merge text field and did the merge. The first 6 come out fine, but subsequent labels are spilling off the page, such that label 7 and 8 are right underneath 5 and 6 and going off the page. Page 2 of the document is ending up with label 24-25, but label 7-8 should be starting off page 2.
Thanks,
-Jeff

function(){return A.apply(null,[this].concat($A(arguments)))}
jdahl2 wrote:
The first 6 come out fine, but subsequent labels are spilling off the page, such that label 7 and 8 are right underneath 5 and 6 and going off the page. Page 2 of the document is ending up with label 24-25, but label 7-8 should be starting off page 2.
Thanks,
-Jeff
Adjust the spacing between rows, and the top margin from the Multiple Record Layout tab. (It is dependent on your frame height.)
A 6 up layout took me about 2 minutes, 17,000 + records, with the placeholder created on the master page. Contradictory to some other post's in this thread, master pages are fine for setting placeholders, are my norm and are the recommended method. (It allows the subsequently created document to serve as another source master.)

Print URL at top/ bottom of page is too small & half off the page

Similar Messages

Maybe you are looking for