Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host

Hi,
I have created a ALV report in ABAP Webdynpro.
When i try to print the ALV Report it gives Communication failure : Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host.
I belive i need to install Usage Type BI Java.
Can someone help me with the same how to find the installation. I am unable to find what to install.
Thanks and Regards,
Nuzhat

Hi Sergio,
Thanks for the immediate reponse.
I have already gone thru the blog u have sent.
I am uable to do installation of Usage type BI-Java.
I need anyone's help for the same.
Thanks and Regards,
Nuzhat

Similar Messages

NW CE 7.1, Bean:SALV_WD_EXPORT_PDF not found

We have just installed a NW CE 7.1 environment and are trying to get the webdynpro for Adbbe Document Export (SALV_WD...) working. We get an error message stating "Bean: SALV_WD_EXPORT_PDF not found on host". The JCO connection is working.
The error informatoin leads us to believe the we must have the usage type BI_JAVA installed. This usage type is nowhere to be found for NW 7.1. It seems to be available for NW 7.0.
Do we need it? If so, where is it available? If not, what should we do to get this working?
Thanks in advance.

Hi,
Did you select Adobe Document Services Usgae type during installation.
Also,BI-Java usage type is not supported in CE 7.1
Rgds,
Soujanya

PI 7.1 --- rfc scenario---bean stfc_connection not found on host

Hi,
I am trying to execute STFC_CONNECTION but getting an error bean stfc_connection not found on host
I had checked following things..
1)SM59 connection tested and it is working fine.
2I)imported RFC in to PI created sender, receiver communication channels,sender, receiver agreements etc..
3)Checked all the threads in SDN could n't find any solution..
Please suggest me if you know anything about this issue
Thanks in advance

Dear Gowri,
Concerning the error you are getting, kindly perform a Full CPA Cache refresh using the URL :
- http://<host>:<Java-Port>/CPACache/refresh?mode=full
If that does not help, please check the following :
- Have you imported the structure of STFC_CONNECTION function module from the R/3 system into the integration repository?
- In integration directory, check the RFC_sender and RFC_receiver communication channels, click on module tab, see if localejbs/RfcAFBean is listed there. If not, please add it.
Also, kindly go through the note : 1135947 which might help you.
Best Regards
Nishwanth

Bean RFCfunctionname not found on host for XI internal scenario

Hello,
This seems to be a little bit tricky.
Full Scenario is:
1. FTP -> XI -> RFC
The RFC is connecting to XI ABAP stack!!!
Within the called function module there is some operation on the provided data.
At the end six(!) different RFCs will be called dependend on the result of the data operation.
(Currently only one is implemented on Repos. and Directory and in test! )
The RFC call goes to a sender RFC channel in XI.
So this is the second part of the full scenario
2. RFC -> XI -> SOAP.
The RFC is started from PI ABAP stack with the call function as mentioned below.
Interfaces are completely implemented. So RFCs for 1. and 2. are imported successfully to SAP PI.
First interface is running fine. File is picked up, moved to RFC receiver.
Function module starts in PI ABap stack, doing data operation and then the correct RFC is called.
CALL FUNCTION 'Z_SF_ADRESS' in background task
        destination 'XIEADRVZ'
        TABLES
          Z_SF_ADRESSE = Z_SF_ADRESSE_RFC.
      COMMIT WORK.
But the call does not reach SAP PI Integr. Server.
This is the error in SM58:
Bean Z_SF_ADRnot found on host WSC S0010, ProgId =Z_SF_ADR
= > Z_SF_ADRESS = function module for RFC call to sender channel
XIEADRVZ is the TCP IP connection in SM59 with the reg.Prog.ID calling service and host of SAP PI.
ProgID from TCP IP is correct (copied from SM59 to sender channel to avoid wrong typos)
There is no error in ST22!
There is nothing in monitoring for the interface no. 2 !
Your help is really appreciated!
Best regards
Dirk

Hi Ashish Sinha,
ProgID from TCP IP is copied from SM59 to sender channel to avoid wrong typos.
So this is ok.
The error message says from my point of view that the RFC is not found.
Have recreated the function module and reimported under new name.
No change of error message.
Is there really nobody who had this issue before?
Regards
Dirk
No idea what has happened. After moving to SAP PI 7.1 the error was still there.
After deleting error messages (from tests in 7.1) in SM58 and generating some more tests some of the items in SM58 moved to
"stored/recorded" and remained in that staus.
After another day we were able to restart them and they were processed.
Now the error vanished into air. Any new RFC call is processed directly now.
Maybe Basis corrected something with their work during release change?
Edited by: Meinhard Dirk on Mar 24, 2011 9:26 AM
Edited by: Meinhard Dirk on Mar 24, 2011 9:31 AM

Java system error: Bean BICS_CONS_GET_VIEW_DEF_J_PROXY not found

In BEx Report Designer, click Insert Data provider under Report, and then choose one create query, system show the error message(message class:RSBOLAP, message number:018), the detail diagnosis like below, please help to solve it. Thanks!
Diagnosis
Error while loading query metadata, Check the query and portal settings
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.

hello,
Please check the system configuration using:
937697: Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool
Regards, Karol Kalisz, BI Development

Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.

Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

Error while running February 2014 CU for SharePoint 2010 Foundation: The expected version of the product was not found on the system

I ran SP2 and SP2 for Language Pack successfully before.
Here is how it looks:
Product
Version
Status
Language Pack for SharePoint Foundation 2010 - Portuguese/Português (Brasil)
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Portuguese/Português (Brasil)
Installed
Microsoft Access Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Document Lifecycle Components Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2512800)
14.0.5138.5000
Installed
Microsoft Excel Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Excel Web App Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft InfoPath Form Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft OMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Project Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Portal Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Slide Library Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Visio Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Word Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft XMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
PerformancePoint Services in SharePoint 1046 Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010
Installed
Microsoft SharePoint Foundation 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft® Search Server 2010 Express
Installed
Microsoft Office Server Proof (Arabic) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (English) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (French) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (German) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Russian) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Spanish) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 English Language Pack
14.0.4763.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Search Server 2010 Express
14.0.4763.1000
Installed
Microsoft Shared Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Shared Coms English Language Pack
14.0.4763.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics English Language Pack
14.0.4763.1000
Installed
Microsoft Web Analytics Web Front End Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
However when I try to run February CU or December CU I get the error:
The expected version of the product was not found on the system
it's possible that I messed up because
I think I installed a SharePoint Server Service Pack 2 in a SharePoint Foundation Farm.
these are the files I ran:
1 - SP2 pt-br
oserversp2010-kb2687453-fullfile-x64-pt-br
2 - SP2 for Language Pack pt-br:
oslpksp2010-kb2687462-fullfile-x64-pt-br
3 - ran configuration wizard (had na error message the first time and success in the second try)
4 - December CU or February CU:
Download SharePoint Foundation 2010 February 2014 CU
The expected version of the product was not found on the system
In the first step I think I should have installed
wsssp2010-kb2687464-fullfile-x64-pt-br
Now I try to runthis and I get:
The update is already installed on the system.
Hopefully this is a QA Environment but it would be a pain to start over.
Any suggestion?
Thanks
J.Clua

Hi,
Here are all errors logged:
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [81606c80-44b3-47c9-8c24-136bdeb07d64]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 81606c80-44b3-47c9-8c24-136bdeb07d64 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [4b6e8a49-765d-47a1-92f8-91f61d07bbed]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 4b6e8a49-765d-47a1-92f8-91f61d07bbed is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [00bfea71-dbd7-4f72-b8cb-da7ac0440130]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 00bfea71-dbd7-4f72-b8cb-da7ac0440130 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: Found a missing feature Id = [5daabc0d-5714-4b95-9238-95d58704bc11], Name = [Blog Rating], Description = [This feature allows visitors
to rate blog posts], Install Location = [Blog Rating]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: The feature with Id 5daabc0d-5714-4b95-9238-95d58704bc11 is referenced in the database [WSS_Content_AcademiaTI], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_GlobalIT], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [DEBUG] [3/11/2014 5:25:49 PM]: Retrieving site definition for language 1046...
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 21 web(s) using missing web template 75801 (lcid: 1046) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75801 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 1 web(s) using missing web template 75802 (lcid: 1033) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75802 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-2d1e-451a-b445-16bc346d7d8e]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-2d1e-451a-b445-16bc346d7d8e is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-5f69-4282-83ae-22808c0fbfd9]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-5f69-4282-83ae-22808c0fbfd9 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-6e3f-4d4a-8f78-245bda567b60]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-6e3f-4d4a-8f78-245bda567b60 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-040e-4abb-b94b-32f1e7572840]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-040e-4abb-b94b-32f1e7572840 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-b5a0-47d5-90e6-4b3205b02278 is referenced in the database [[OWSTIMER] [SPContentDatabaseSequence] [ERROR]
[3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]], but is not installed on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature
and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [f7b9c169-1418-41f3-888f-8ac436e17a0a]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id f7b9c169-1418-41f3-888f-8ac436e17a0a is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-f13a-4670-8b69-97e90d05f7c8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-f13a-4670-8b69-97e90d05f7c8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-377d-4b4f-b864-984379ed0f42]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-377d-4b4f-b864-984379ed0f42 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-9d96-4f02-a800-a3512154efcd]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-9d96-4f02-a800-a3512154efcd is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [90cd055f-f21f-42c5-b3fe-bb67173583d4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 90cd055f-f21f-42c5-b3fe-bb67173583d4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-0017-4993-85fe-c37971507bbc]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-0017-4993-85fe-c37971507bbc is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-fe65-41c3-a965-c5df83fb098b]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-fe65-41c3-a965-c5df83fb098b is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-7c51-4a75-92c1-cbaccb371622]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-7c51-4a75-92c1-cbaccb371622 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-b0ef-434e-90d6-ce997d970564]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-b0ef-434e-90d6-ce997d970564 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-37d2-484b-b362-dcff1538e2a4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-37d2-484b-b362-dcff1538e2a4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [49c44827-4747-4e89-999c-f199ad95cfa8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 49c44827-4747-4e89-999c-f199ad95cfa8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-42e8-4527-8313-f63c4c49a7e6]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-42e8-4527-8313-f63c4c49a7e6 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-a4ce-4a83-867d-f6be0ffdd867]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-a4ce-4a83-867d-f6be0ffdd867 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.<nativehr>0x81020013</nativehr><nativestack></nativestack>
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
   at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Upgrade [SPSite Url=http://sjkqa41:7779] failed. Microsoft.SharePoint.Upgrade.SPSiteWssSequence has the ContinueOnFailiure bit set. Moving
on to the next object in sequence.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
   at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
   at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)
   at Microsoft.SharePoint.SPFieldIndexCollection.IndexOneField(Object field, Boolean bIndexed)
   at Microsoft.SharePoint.SPFieldIndexCollection.Add(SPField field)
   at Microsoft.SharePoint.Upgrade.RestoreWorkflowAndDatasourceLibraryPermissions.Upgrade()
   at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:37:44 PM]: Upgrade Timer job is exiting due to exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Upgrade completed with errors.
Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\Upgrade-20140311-164603-307.log.
The number of errors and warnings is listed at the end of the upgrade log file.
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()
   at Microsoft.SharePoint.Administration.SPUpgradeJobDefinition.Execute(Guid targetInstanceId)
Despite all the erros, can I consider these farm updated in terms of SharePoint build?
Thanks
J.Clua

Oracle VM Server Version: 3.2.9, was not found in file: UpgradeServersYumPkgLists.txt

After an upgrade to 3.3 Oracle VM Manager Core WS-API Shell 3.3.1.1065 (20140619_1065)
Server VM's are version 3.2.9
UpgradeServers.py is failing with
Wed Mar 4 21:32:39 2015 INFO: UpgradeServers script starting...
Wed Mar 4 21:32:39 2015 INFO: OVM Manager version: 3.3.1.1065
Wed Mar 4 21:32:39 2015 INFO: Command line args: ['UpgradeServers.py', '-v', 'pg-uni-ovm-0.xxxx.ca']
Wed Mar 4 21:32:40 2015 DEBUG: Initial set of plugins (currently in-use on storage arrays): []
Wed Mar 4 21:32:40 2015 DEBUG: Servers to upgrade: pg-uni-ovm-0.xxxx.ca/v3.2.9-749,
Wed Mar 4 21:32:40 2015 INFO: Server: pg-uni-ovm-0.xxxx.ca. Transition Server Update Repository: 3.3_trans_repo, URL/path: http://yum.xxxx.ca/yum/OracleVM/OVM3/x86_64/transition/3.3/
Wed Mar 4 21:32:40 2015 INFO: Server: pg-uni-ovm-0.xxxx.ca. OVS Server Update Repository: 3.3_ovs_repo, URL/path: http://yum.xxxx.ca/yum/unknown/OVM3X/latest/x86_64/
Wed Mar 4 21:32:40 2015 INFO: Getting update packages list in Server Update Repository: 3.3_ovs_repo, using oldest server: pg-uni-ovm-0.xxxx.ca, version: 3.2.9-749
Wed Mar 4 21:32:43 2015 INFO: Checking servers for non-native packages (those installed after initial server installation)
Wed Mar 4 21:32:43 2015 FATAL: Version: 3.2.9, was not found in file: UpgradeServersYumPkgLists.txt. You must download a new version of this file. See Installation Guide for details.
Wed Mar 4 21:32:43 2015 INFO: Log file is available at /u01/app/oracle/ovm-manager-3/ovm_tools/bin/UpgradeServers.log
Wed Mar 4 21:32:43 2015 INFO: UpgradeServers script stopping...
[root@pg-uni-om-0 ~]#
cat /u01/app/oracle/ovm-manager-3/ovm_tools/etc/UpgradeServersYumPkgLists.txt
shows nothing in the 3.2 series
How can I regenerate, download or fix this so I can update the servers?

Please use Oracle VM Manager 3.3.2.
https://wikis.oracle.com/display/oraclevm/Oracle+VM+What%27s+New
For download instructions, visit Oracle VM Downloads

HT1567 System says DISC RECORDING NOT FOUND - yet Ive downloaded it again.

System says DISC RECORDING NOT FOUND when burning to disc

System says DISC RECORDING NOT FOUND when burning to disc

Could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).

Hi
I am getting this error when trying to start a VM in a Windows 2008 R2 Hyper-V ( all updated applied )
'vm-xx' could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).
Does anyone experienced this error?
I found one update, KB967902 but it is for Windows 2008 Hyper-V not for R2
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hello
Alessandro,
I wrote about this error in the following KB and blog post.
Please let me know if they are helpful.
Error 2912 when a Virtual Machine Manager 2008 operation fails due to a certificate issue: "Element not found (0x80070490)"
http://support.microsoft.com/kb/971264
http://blogs.technet.com/b/mbriggs/archive/2009/05/08/vmm-operation-fails-with-error-2912-0x80070490-due-to-a-certificate-issue.aspx
Best Regards, Mike Briggs [MSFT]
– Posting is provided "AS IS" with no warranties, and confers no rights

Bean ZBAPI_COMPANY_DETAIL no found on host

Hi experts,
I created the BAPI for using asynchronous RFC between ECC and XI server. But when i run the report and call the RFC like that:
CALL FUNCTION ZBAPI_COMPANY_DETAIL
     IN BACKGROUND TASK
     DESTINATION 'ECC_RFC_XI'
TABLES...
The error message occurs in SM58 is: Bean ZBAPI_COMPANY_DETAIL no found on host xxxx, although i had created the RFC with type T and name ECC_RFC_XI point to the XI server.
Could you guy help me to solve this error please.
Thanks in advance.

Hi Pham,
I have tested it in my system and it is working fine without any issue. What you need to do is as below.
1. ZBAPI should have only tables parameters rest import & export tabs should be empty.
2. Do not write any code inside your ZBAPI.
3. In your ABAP program create an internal table exactly same as in BAPI.
4. Select the data into this internal table.
5. Now call this bapi and pass this internal table, see the below code .
PARAMETERS : comp_id TYPE bapi0014_2-company.
DATA: company_detail TYPE STANDARD TABLE OF t880.
SELECT rcomp name1 cntry langu stret city
FROM t880 INTO CORRESPONDING FIELDS OF TABLE company_detail
WHERE rcomp = comp_id.
CALL FUNCTION 'ZBAPI_COMPANY_GETDETAIL'
IN BACKGROUND TASK
DESTINATION 'R3_TO_XI'
TABLES
    comp_detail = company_detail.
COMMIT WORK. "(if you do not use commit work, it will not work)
6. Before executing this code make sure the RFC 'R3_TO_XI' created in SM59 passed the test successfully.
You must be having a question in your mind that why we have not written that select statement inside the BAPI. If my assumption is correct then the answer is, this BAPI is working here a carrier and since it is asyn scenario then it should not have any import or export parameters. It simply carries the fetched data from your report to target system.
Test your scenario like this and if you have any doubts let me know.
Regards,
Sarvesh

SFTP Issue in OSB invocation resulted in an error: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,ip

I created a Proxy Service to do pull file and push it to sftp server
known_hosts file is present on OSB server.
It has abcserverhostname,IP ssh-rsa AA................. ==
I created a business service to do SFTP push to sftp server (remote) - Its not working.
<Error> <SFTPTransport> <BEA-381826> <Key Not Found for host hostname,10.124....>
com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124.....
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
My Business Service
End Point URI : sftp://sftpserverhostname:22/directorypath
Authetication Mode : user name, password.I have created a Service Account for sftpserver and imported in Business Service.
Do I need to give anything else in known_hosts file ?
and hostname can be any random name?
<Dec 11, 2013 1:45:37 PM GMT+08:00> <Error> <SFTPTransport> <BEA-381801> <Error occured for endpoint com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124....
com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:161)
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:111)
at sun.reflect.GeneratedMethodAccessor566.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
Caused By: com.maverick.ssh.SshException: ssh-dss Key Not Found for host eirnode2,10.124.10.16
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.A(Unknown Source)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.verifyHost(Unknown Source)
at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
Truncated. see log file for complete stacktrace

BEA-381826 suggest that there is any issue with your public key in known_host file, can you cross verify it again. Also can you check if known_host file has appropriate permissions and I am assuming it is in /OSB_DOMAIN/osb/transports/sftp folder.
Hostname,IP algorithm publickey are the hostname, ip, and public key of SFTP server.
As per troubleshooting guidelines
The Key not found for IP, host error message indicates that the known_hosts file does not contain an entry that corresponds to the specified IP-host combination. If the entry exists, then try with another algorithm key; for example, if the earlier attempt was with an RSA key, try again with a DSA key.
Cheers,
Sahil

Black Ink won't print & "Ink System Failure"

I have a 3 year old HP Photosmart Plus e-ALL-IN-ONE B210, Product # CN217A. I was doing a lot of printing yesterday, noticing that I was getting low on Black ink. Then I got a very light page and changed the black ink cartridge. I installed it and....nothing! I cleaned the print heads...nothing. Thinking I had a bad cartridge, I went to the store and exchanged it. Again, nothing. So following direction's on HP's website, I removed the print head and gently wiped it off. I placed it back, following directions, reinserted the ink cartridges and now I get the "Ink System Failure." I also cannot align the print cartridges, either. Any help would be greatly appreciated.

As it's 3yrs old, it's likely out of warranty (typically warranty is a year from purchase date). It might be worth soaking the printhead as described by @Bob_Headrick below....
1) Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
2) Next remove all the ink cartridges, then remove the printhead assembly.
3) Gently put the printhead nozzles down in the water and let it soak for five minutes.
4) Remove the printhead and gently dry the electrical contacts.
5) Put the printhead back in the printer and then reinstall the ink cartridges.
Please let us know if this works
Thanks
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

All-on-One printer ink system failure with unusual error code

Woe is me (and my kids)! Got the 'printhead problem' message while using my C6380 printer. Followed all instructions - cleaned the printhead, replaced the cartridges with new HP products, reset the printer - but persistently getting the 'ink system failure' message. The error code is Oxc19a0007 which is NOT one of the many listed error codes - ...0006 and ...0008 are on the list but not ...0007.
Any ideas, anyone?
BW
DPCT

Hello DPCT,
Welcome to the HP Forums!
I understand your Photosmart C6380 is stating "Ink System Failure". I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector.
Please follow this HP document on 'Ink System Failure' or a '0x...' or a 'C2...' Error Message Displays on the Front Panel. If you're still experiencing the same problem, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

APEX Listener 2.0 - RESTful Services Failure with 404 - Not Found

Versions used:
* APEX Listener 2.0.0.354.17.05
* Application Express 4.2.1.00.08
* Oracle Database 11.2.0.1
When testing the sample RESTful Service Module oracle.example.hr I always get 404 - Not Found page.
I followed the documentation to install and configure APEX 4.2 and the Listener 2.0. Everything in my APEX installation works fine except RESTful Services.
For example, when calling this RESTful Service:
http://company.com:45678/apex/DEV/xxuapex/hr/empinfo/
I get a 404 page.
The corresponding entry in url-mapping.xml is:
<pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
where xxuapex is the name of the schema as well as the workspace where the RESTful Service is installed.
Moreover, the corresponding od01.xml, od01_rt.xml and od01_al.xml in the conf directory seem correct.
Any help is greatly appreciated.
Thanks.
Eddie Awad.

Hi Eddie,
+> try the other option base-url of the url-mapping+
I did. No change. Still getting 404.When active it should transform the 404 page into a detailed 404 with a description of what the error is. Just to be sure, this is activated in the defaults.xml file of the APEX Listener as: *<entry key="log.logging">true</entry>*.
You should then see a detailed 404 output in your browser of what's going wrong first of all.
+> Could you post your url-mapping.xml file?+
<?xml version="1.0" encoding="UTF-8"?>
<pool-config xmlns="http://xmlns.oracle.com/apex/pool-config">
<pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
<pool base-path="/TEST" name="ot01" workspace-id="xxuapex"/>
</pool-config>
Despite using the url mapping script, it didn't map mine correctly and had to edit it manually. It was the use of "apex" that got it to work for me:
*<pool base-path="/" name="apex" workspace-id="workspace-name-here" updated="2013-01-09T20:48:59.75Z"/>*
Nick.

Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host

Similar Messages

Maybe you are looking for