Print visible view

Is there a way to print the current view by which I mean the visible selection of the page without dragging and highlighting a selection or going into print preview and searching through the pages to find what page you want to print? I just want to be able to print what page page I am currently viewing without having to search for the page number in the print preview. Thanks in advance

In addition to Command-Shift-3, there is also Command-Shift-4. Pressing that key combination will result in cross-hairs that you can drag to select a portion of the screen.
Even better: after pressing Command-Shift-4, hit the spacebar. The cursor will change to a camera icon, which you can move over any visible window and click, resulting in a screenshot of just that window.
Pressing the Escape key before clicking for a screenshot will cancel and return the cursor to normal.

Similar Messages

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

Printing Current View in Acrobat 11

Just "upgraded" to Acrobat 11 from 8. Can't seem to print "current view" form the print dialog box and yes I have clicked on the more options box and it's not there as well.

Can you post a screenshot?

Printing List view/CRM4Mac

For those of you wanting to print list views with only dates that have events, CRM4Mac allows you to do this for events (no To Do's, yet.)
CRM4Mac (Contact Relations Management for Mac) might be worth folks taking a look at: http://www.crm4mac.com/index.html
It integrates Mail, Address Book and Ical (excluding tasks) but for US$50. I hope a more complete solution is on the way (ie Chronos).

Does anyone know if syncing via .Mac will also cause the URLs to show up? None of my to dos have been entered via Mail and yet all but the one I just entered have the offending URLs. Most of the contents of iCal is there via a "Restore iCal..." done as part of a migration to Leopard. I have entered several since then, all via iCal. And, all but the one that I entered just moments ago have the URLs when printed as a list. In terms of .Mac syncing, I only sync iCal and Address book, and the sync is between two Macs running 10.5.1.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Printing a view

hi
How to print a view in NW 2004s? Please provide me steps and code for the same.
Regards,
Arun Srinivasan

Hi,
see the thread
Print in WebDynpro
Print in WebDynpro
Print Function in webDynpro
<b>Valuable answer=points</b>
Kind Regards,
S.Saravanan.

Printing week view omits times

When you print the week view of an iCal calendar, it does not print the start and end times of the events -- it only prints the names of the events. Maybe it's just me, but doesn't this make the printed week view nearly useless? I need to know precisely what times these events start and end, not just a rough idea. At the very least, it should show the start time, as it does in the non-printed week view. I can't see any options to change this behavior -- anyone else know how?

Greetings,
The calendar will always have all 24 hours on it. What you can do is set the number of hours you want in the day, in preferences, which will scale the hours for you, then slide the screen to show the hours that you want, and then quit iCal. Restart it, and it should come up with the same view that you left with. This way it looks like just the hours you selected.

Print current view greyed out in Acrobat 9.4.1

I can't select Print current view for some reason. I tried selecting different printers but am unable to select this option. I saw an earlier post that said take the cursor off of page navigation, but I've done that (and don't even have page navigation open) but still cannot select "current view" print.
Can anyone help?
Thanks!

I figured out that if I zoom to an area 1 page or smaller the "current view" print is available.
What I'm trying to do is print the bottom 1/3 of one page and the top 1/2 of the next page. Apparently if the view spans 2 or more pages the current view print option is unavailable.
Is there a way to do what I want (print 1/2 of the bottom of page 2 and top 1/2 of page 3)?

I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?

I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?

Sorry to have repeated this question as if I were answering it. Just a mistake. I'm just now learning how to use this site.

Is there a way to automatically display a Word document in Print Layout view?

I am using Report Generation Toolkit (v.1.0.1). After displaying the report, the view in Microsoft Word is always "Normal." It would be really nice to automatically show it in "Print Layout" view. (i.e. in Word, go to View >> Print Layout) Is there a way to do this programmatically through the vi? I'm using LV 7.1 and Windows 2000. Thanks,

Hey dj143
The best way to do something like that is with property nodes.You can do this the easy, by going into word and recording a macro. Then look at the macro and duplicate it using property nodes.here is a vi that I did for you that answer your question
Joe.
"NOTHING IS EVER EASY"
Attachments:
printview.vi ‏44 KB

In contacts the country field of the address does not appear in the print pre view or or in the printed label. any suggestions why or who to correct ?

In contacts on my new i Mac the country field does not show in the label print pre view or the printed label.
Any suggestion of why this is happening?

I have found a solution - no bug. See this link
Address book

Printing of views without Netweaver 2004s (Solution 2)

Hallo,
after writing my post concerning a printing solution before NetWeaver2004s (Solution 1),
i will also share my knowledge concerning my own printing solution developed inside Web Dynpro.
The following example should only demonstrate how an implementation of a print renderer can be done
inside Web Dynpro while you can take influence of the generated output.
I had to develop the possibility of printing some views including some head infos and table data.
The application is localized into six languages.
First i had a look at Adobe Document Services, but it is quite uncomfortable using table output
(it seems to be better supported in NetWeaver 2004s), but the problems resists in the localized labels.
You have to implement each lable also as an computed attribute to use it inside Adobe or
you have to copy the template for each language and translate it beside the xlf files.
I needed a solution that does not generate additional needs to print views.
So i decided to write an own PrintRendererClass using the Runtime view and the mapped context.
The following szenario should only demonstrate how you can archieve such a solution.
The Solution needs two Context attributes:
<b>ViewPrinter</b> (holds the reference to the renderer class)
<b>ViewPrinterURL</b> (String that receives an URL handle for using inside a LinkToURL control)
The instantiation of the class takes place inside the wdDoModifyView:
public static void wdDoModifyView(IPrivateDetailsView wdThis, IPrivateDetailsView.IContextNode wdContext,
     com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime) {
//@@begin wdDoModifyView
if (firstTime) {
     ViewPrinter vprt = wdContext.currentContextElement().getViewPrinter();
     vprt = new ViewPrinter(view, wdContext, WDClientUser.getLoggedInClientUser().getLocale());
     vprt.setTitle(vprt.getTextById("Headline"));
     vprt.addGroup("GroupCustomerorder");
     vprt.addTable("TablePositions");
     wdContext.currentContextElement().setViewPrinterURL(vprt.render());
//@@end
The RendererClass is only a framework for a big StringBuffer (xml) that uses methods to add
addtional output content to the string and finally generates a dynamic xhtml file.
The URL handle is returned at the end via vprt.render() and stored in the context attribute.
Inside the view you can use a LinkToURL control mapped to this context attribute,
which opens a new window with the generated xhtml file.
The most interessting parts are addGroup(uielementid) and addTable(uielementid).
The addGroup searches for a uielement with the given id and iterates through all entries.
For all found labels and their binded values output code will be added:
public void addGroup(String id) {
     // open group
     xml.append("<fieldset>");
     IWDGroup group = (IWDGroup) view.getElement(id);
     // get group header text
     String legend = group.getHeader().getText();
     xml.append("<legend>" + legend + "</legend>");
     // trace all elements
     for (Iterator iter = group.iterateChildren(); iter.hasNext();) {
          IWDUIElement uiEl = (IWDUIElement) iter.next();
          if (uiEl instanceof IWDLabel) {
               xml.append("<div>");
               this.addLabelWithValue(uiEl.getId());
               xml.append("</div>");
     // close group
     xml.append("</fieldset>");
For each found label the label and binded text should be printed out:
public void addLabelWithValue(String id) {
     // find given label (with value)
     IWDLabel lbl = (IWDLabel) view.getElement(id);
     if (lbl!=null) {
          xml.append("<label for="" + lbl.getLabelFor() + "">" +
               encodeHTML(lbl.getText(),true) + ": </label>");
          // find corresponding value
          IWDTextView txt = (IWDTextView) view.getElement(lbl.getLabelFor());
          if (txt!=null) {
               xml.append("<span id="" + lbl.getLabelFor() + "">" +
                    encodeHTML(txt.getText(),true) + "</span>");
The most interesting part is the generic output of a table:
public void addTable(String id) {
     // find given table
     IWDTable table = (IWDTable) view.getElement(id);
     String tableBindedDataSource = table.bindingOfDataSource(); // node "Positions"
     xml.append("<fieldset>")
          .append("<legend>" + table.getHeader().getText() + "</legend>");
     xml.append("<table summary="")
          .append(table.getHeader().getText())
          .append("">");
     xml.append("<thead><tr>");
     // use iterator
     ArrayList cellAlign = new ArrayList();
     ArrayList cellId = new ArrayList();
     int nrUsedColumns = 0;
     for (Iterator iter = table.iterateColumns(); iter.hasNext();) {
          IWDTableColumn col = (IWDTableColumn) iter.next();
          // check column id against blacklist
          if (!blackList.contains(col.getId())) {
               IWDTableCellEditor cellEditor = col.getTableCellEditor();
               // casting for supported uiwidgets
               String bindedColumnText = null;
               if (cellEditor instanceof IWDTextView) {
                    IWDTextView txt = (IWDTextView) cellEditor;
                    bindedColumnText = txt.bindingOfText(); // "TABLE.ATTRIBUTE"
               // add supported widgets to print
               if (bindedColumnText != null) {
                    // remove leading TABLE prefix (use only ATTRIBUTE)
                    String textId = bindedColumnText.substring(bindedColumnText.lastIndexOf('.')+1);
                    // get column alignment
                    String colAlign = col.getHAlign().toString().toLowerCase();
                    String classAlign = (colAlign.equalsIgnoreCase("auto"))
                         ? "" : " class="" + colAlign + """;
                    xml.append("<th" + classAlign + " scope="col" abbr="" + col.getHeader().getText() + "">")
                         .append(col.getHeader().getText())
                         .append("</th>");
                    // make column values for table body available
                    cellAlign.add(nrUsedColumns, colAlign);
                    cellId.add(nrUsedColumns, textId);
                    nrUsedColumns++;
     xml.append("</tr></thead>");
     // print out table body
     xml.append("<tbody>");
     // table corresponding context node
     IWDNode node = ((IWDNode)wdContext).getContext().getRootNode().
          getCurrentElement().node().getChildNode(tableBindedDataSource, 0);
     int tableSize = node.size();
     IWDNodeElement nodeEl = null;
     for (int i = 0; i < tableSize; i++) {
          xml.append("<tr>");
          nodeEl = node.getElementAt(i);
          for (int col = 0; col < nrUsedColumns; col++) {
               Object value = nodeEl.getAttributeValue(cellId.get(col).toString());
               String classAlign = (cellAlign.get(col).toString().equalsIgnoreCase("auto"))
                    ? "" : " class="" + cellAlign.get(col).toString() + """;
               xml.append("<td" + classAlign + ">"
                    + encodeHTML(this.getAttributeValue(value), true) + "</td>");
          xml.append("</tr>");
     xml.append("</tbody>");
     xml.append("</table>");
     xml.append("</fieldset>");
[code]
First we inspect all table columns to get the head labels and the used cell editors.
There is also support for a black list to allow skipping of columns that should not be printed.
Invisible columns are also printed, so you can add addtional table columns for printing that are
disabled for the browser. Also the alignment of the cell editor will be supported.
A second loop iterates over the table context depending the used columns.
To get the formatted values concerning their datatype i use the method getAttributeValue,
cause i think the formatting of mapped Context to the browser takes place in the deepest parts
of the Web Dynpro Renderer Task and is not accessible via API.
Therefore you have to implement formatters for all supported datatypes:
[code]
private String getAttributeValue(Object obj) {
     String txt = "";
     if (obj != null) {
          // String handling
          if (obj instanceof java.lang.String) {
               txt = obj.toString();
          // Date handling
          } else if (obj instanceof java.sql.Date) {
               DateFormat formater = DateFormat.getDateInstance(
                    DateFormat.SHORT, this.locale);
               txt = formater.format(obj);
          // BigDecimal handling
          } else if (obj instanceof java.math.BigDecimal) {
               DecimalFormat df =
                    (DecimalFormat)DecimalFormat.getInstance(this.locale);
               df.applyPattern( "0.######" );
               txt = df.format(obj);
          // Default Handling -> with debug output of Class Name
          } else {
               txt = "<span class="pointer red" title="" + obj.getClass().getName() +
                    "">" + obj.toString() + "</span>";
     return txt;
Here is the reason, why the class constructor needs a locale!
I try to format the output concerning the portal user language.
At the end you have to call the vprt.render() method to start creation of a new html ressource.
The method returns the ressource url as a string which is binded to a LinkToUrl control.
That's it.
The above solution only fullfills my needs concerning the project. I implemented only the
needed methods to print out groups and tables.
The table renderer skips all table columns that are not IWDTextView.
if you need addtional things like IWDProgressBar, you have to implement such a kind of renderer.
The solution is a nice way to generate printable content of views with the following benefits
Pro:
- Print out is Locale/Language dependend (Text, Date, ...)
- You can influence the print design via css
- You can implement your own controll renderer (like decorators)
- It works for SAP Net Weaver releases <= 2004s
Cons:
- To support all widgets, you have to implement them
(controls/widgets are growing with new service packs)
The functionallity shows how you can use the abstract api for iterating
through view elements and their mapped context in a generic way.
The solution is a plain structured class because i do not want to reimplement
the whole Widgets API for printing a view (not in the scope/budget of our customers).
If you are interessted in the working class file, please contact me.
Maybe this helps someone who has to do similarly things inside Web Dynpro
and does not want to reinvent the wheel.
Best wishes,
Holger Schaefer

Hi Holger,
This Solution helped me a lot. Thanks a lot.
Sreekanth

SAP Script not printing as viewed in preview

Hi Experts,
I have a SAP Script which is driven via RFFOUS_C Program.The script is using custom page format which is created via SPAD.
I have a wierd issue like i can see all my data in preview but when i print all the lines are not printing as viewed in preview.Its printing from top of the page till 70% and the bottom portions are not getting printed.
How can I solve this?
Thanks,
Siva

Hi Siva
Please check the page format as well as printer on which are printing settings in SPAD..Do we have any custom space before and after defined...? You can also try by testing it with existing format and different printers to find the issue whether it is at script/page/printer level
Nabheet

Can I print the "view responses" pages?

We just came off of an event and used Forms Central for our evaluation form. I can print the Summary Report, but I want to print the View Responses page, as we asked folks for comments in several areas.
mkT

Thank you!
Blessings,
MelanieMelanie Timmerman
*Executive Admin. Asst./Office ManagerLa Crosse Area Synod,
ELCA608-788-5000*
PRIVILEGED AND CONFIDENTIAL
This e-mail may contain privileged and confidential information and is only
for the use of the specific individual(s) to whom it is addressed. If you
are not an intended recipient of this e-mail please do not use,
disseminate, or copy this e-mail or the information contained in it or
attached to it. If you have received this e-mail in error, please delete
it and immediately notify the sender named above by e-mail reply. Thank
you.

Print Visible Grids and Guides

Hi everyone,
I'm using InDesign CS3 5.0.4, If i export to direct pdf the check box of Print visible grid and guides is enabled, But to make the postscript file the mentioned option is disabled.
Please guide me how to enable this option in the InDesign
Thanks and Regards,
Nagaraj

... I don't have a special profile. I almost never directly print, but Export to PDF exclusively. And if you use that instead, you can choose any of the standard presets -- High Quality, Press Quality, etc. -- no printer dependent settings.
The print options inside InDesign and Acrobat are (partly) optional, depending on the printer driver you happen to have installed.

Print visible view

Similar Messages

Maybe you are looking for