Print wda application

How could we take printout wda application when we triggars buton?

Hi praveenkumar,
WDA printing will support from NW 7.02
this issue is already answered by Thomas Jung , plz have a look at the below thread
[Print screen|Print screen]
Regards
Chinnaiya P

Similar Messages

Printout of WDA Application

Dear All
i have developed a custom WDA Application which consist of one iView. I need to take the printout of that iView. I am not able to get the print option for that iView.
Pleas help me , how can i get the print out of that iView
Note: Taking printout of the page will not help since its cuts the half of the screen.
Regards
Pravesh

Hi
May be this thread will be useful
How to print Iview contents only
Print the iview
Edited by: Tulasi Palnati on Apr 3, 2009 12:59 PM

MFP M127fn connected, test printing OK, can't print from applications

Hello Everyone!
I have just set up my M127fn via USB on a Windows 8 system. The set up went fine. I have a small stack of test pages from the HP software, but it won't print anything from any applications like MSOffice. The HP diagnostic software (Print and Scan Doctor 4.6) can communicate with the printer and everything checks out OK.
Any suggestions?
Thanks in advance.

Hello!
I have replied twice to your last posting, but have heard no response. Unless a solution can be presented quickly, I fell I must return the product. LPug and play was introduced with Windows 95 and this HP product has not lived up to that 20 year old technological standard. My previous replies are copied below.
Please respond soon.__________________________________________
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-31-2015 08:06 AM
Hello again!
I haven't heard a response to my most recent reply. Is there anything you can suggest before I give up and return this HP product to the store? I would like a quick resolution to this. As an update to my previous email (copied below), printing is no longer working through Adobe Reader.
Thanks,
Chris
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-28-2015 01:08 PM
Hi,
Thanks for getting back to me. I have tried a variety of different programs:
Mozilla Thinderbird (email) - no results
MS Word - no
ms excel - no
Finale (music software) - no
Adobe Reader - yes!
Google Chrome - yes!
NotePad - yes!
perplexing!

How to print formated data/report on client's printer (Web Application)

Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
Application is web based
Technology used are Java - jsp - servlets
i want functionality like...
when user click on print button/link, data is fetched from server and all pages (it is formated data so i want alignment on page while printing) should be printed one after another.
Also printer selection dialog should displayed one time when user click on print button/link.
Questions:
1. How i will transfer all data to client (web browser) from the server ??
2. And how i can print that data on user's printer ??
There is requirement (or limitation) that I can not use applet for this purpose.
And also it is not fix that we must use java tech., we can use any othere tech. but condition is that it must support multiple platform (in short platform indipendant)
There is solution like ...
I can use window.print() function of DOM/JavaScript,
but it prints only one page which is displayed on browser.
I don't want to display any page. and want to print all pages.
if any one done or have idea then let me know.
Thanks in Adv.
Shailesh Koradiya

thanks linxpda for reply,
we can use ActiveX component for windows platform for printing purpose, same way we can use platform specific component for printing... (for linux, unix, sun solaris etc...)
if it is possible then let me inform.
Thanks,
Shailesh Koradiya

Code 128 Barcode printed from Application Express

Hi,
My colleague and I have written a procedure to generate Code128 Barcodes. These appear fine on the screen within Application Express 3. But when we export the file as an RTF or PDF document to our BI_Publisher server running under LINUX RedHat the Barcodes are greyed out and cannot be seen.
Anyone any ideas on how to solve this? It is extremely irritating only to be able to offer our users the ability to print the Application Express page off rather than a proper document.
Thanks

Hi kcbemssr,
I don't know weather you can see this reply, but i still want to say something about this.
Did you used another type of code 128?
you can try this. and here is a site i recommand you, it's all about barcode, you can get code 128
[Content Removed]

Error while deploying WDA application on portal.

hello Friends,
i am getting this error when eevr i try to check my WDA application on portal.
can you please help me?
note:my its connection is not establishing.
is this the cause of error?
The URL http://duetserver:8006/sap/bc/webdynpro/sap/z57316_portal_event_send/ was not called due to an error.
Note
The following error text was processed in the system EC1 : Die URL enthält keine vollständige Domainangabe (duetserver statt duetserver.).
The error occurred on the application server DuetServer_EC1_06 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system EC1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DuetServer_EC1_06 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server DuetServer_EC1_06 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: DEVECC -l: E -s: EC1 -i: DuetServer_EC1_06 -w: 1 -d: 20070614 -t: 142215 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
thanks,
Nutan.

you need to set up FQDN fully qualified domain name.
instead of http://duetserver:8006/....you need to use
http://duetserver.domain.com:8006/...
check
1. whether WAS settings in system definition in portal is with FQDN
2. check whether ABAP system FQDN is done. (its in the profile parameter icm/host_name_full (you can run abap report RSPARAM and check this.)

HP Officejet Pro 8600 N911g won't print from applications from IMac OS 10.7.5

Just had a software update today, now it won't print from applications (Excel, Word, etc). I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc. Don't know what else to do. Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer. IP addresses on wireless and printer are similar. Looked all over forum, but couldn't find a solution. Printer is not even 2 months old. Doesn't make sense. Seemed to stop printing after we used the scanner, not sure if that is an issue for any reason. Any help would be appreciated, thanks.

Just had a software update today, now it won't print from applications (Excel, Word, etc). I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc. Don't know what else to do. Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer. IP addresses on wireless and printer are similar. Looked all over forum, but couldn't find a solution. Printer is not even 2 months old. Doesn't make sense. Seemed to stop printing after we used the scanner, not sure if that is an issue for any reason. Any help would be appreciated, thanks.

Bypass Logon screen of the SAP R/3 system where WDA application resides

Hi,
I created an application in WDA. I have another appplication in WDJ. On one of the views of WDJ application, I created a link to URL UI elem and provided WDA application's URL to it as a reference. When I click on the link to URL, I expect that WDA should launch. But instead a logon screen appears. This logon screen is the logon screen of the SAP R/3 server in which I created the WDA application.
I want to bypass this logon screen. how do i do this ?
Regards
seventyros

For that you need to establish the SSO between the R/3 system and the JAVA system.
you can import the sso ticket form key store and then put it in abap stack..
or one more method is to give hardcoded user id and password in SICF for the web dynpro application.
however this approach is not recommended.
thanks
sarbjeet singh

How to adjust size of Portal Page Panels for WDA Applications

Hi,
I am designing a Portal Page using Page Layout "3 Colums (Narrow:Wide:Narrow" for WDA application. The problem is that the width of the web dynpro contents on the Left and Right panels ("Narrow" parts of the Page Layout) is not very wide, leaving lot of empty space between those panels and the Center ("Wide") panel. Is there a way that I can adjust the width of each panel in the mentioned Portal Page Layout?
I went through SAP library which mentions using method lr_port_manager->navigate_absolute but I am not clear how to pass the width value in the method. If that method is relevant, can someone give a code example (no copy/paste from SAP Library pls.) of how to put the width value (e.g., 300 in the method? Also, in which method (e.g., WDDOINIT) I should execute the code.
Will greatly appreciate the help!
Thanks,
Tony

You can easily create a custom page layout with your desired widths.
Take a look at this blog:
The specified item was not found.
Thanks,
Shanti

WDA application differs across application servers

Hi,
when transporting from dev to Q, with Q running on 4 different app servers, we see different behaviour of our WDA application. This manifests itself as (for instance) columns of tables not being in the same positions, and also different column widths within the same tables.
It may be down to the different app servers running different versions of the WDA application, but then my question would be: how do we ensure all app servers are "synchronized" whenever we release a new transport? As of now, the users report conflicting test results based on the app behaving differently depending on which app server they happen to be routed to...
OSS doesn't seem to hold any clues to this kind of behaviour. Would a simple flush of the browser cache be sufficient, or is this to do with the app servers themselves (cache, memory, whatever...?)
Regards,
Trond

I don't believe that the app servers holding different versions of a program, it should be same across the systems.
Pl check with the following:
Column's width changes based on its content if no width is set to the column.
also,
Users can always personalize the column positions, if personalization is set.
Thanks
Abhi

A Problem when calling a new WDA Application

Hi,
i am opening a new wda application with link in a html page using that code;
in a html;
<a href = "http://domain/sap/bc/webdynpro/sap/zhr_105_user_pass_control" /> Link </a>
in "zhr_105_user_pass_control" wda application;
METHOD onactioncall .
DATA : lv_url TYPE string.
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = 'ZNEW_WDA'
    IMPORTING
      out_absolute_url = lv_url.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->create_external_window
    EXPORTING
      url    = lv_url
    RECEIVING
      window = lo_window.
lo_window->open( ).
ENDMETHOD.
But this is opening wda application in new window and standard sap sessions couldn't starting so the login screen is opening.
How can i redirect my wda application to another wda application with started sessions?
Can somebody help me please?
Thanks.

Hi,
Here you r using below code
CALL METHOD lo_window_manager->create_external_window
    EXPORTING
      url    = lv_url
    RECEIVING
      window = lo_window.
lo_window->open( ).
It's occuring the external window each time that's why opening Log-On window.
Skip this code and use the code for keep the same window.
-Rick

Disabling "User settings" option from all the WDA applications.

Hello Experts,
We have implemented SRM business package.We want to disable right click "User settings" option from all the applications presented in SRM BP.
I know a way of disabling "User settings" by passing WDDISABLEUSERPERSONALIZATION parameter. We dont want to follow this approach as there are many applications and it would be difficult to change all the applications.
My question is do we have any settings ( may be in sicf ) which could disable "User settings" centrally for all WDA application on that particular server?
Thanks
Surender singh Dahiya

Hi surender,
Check this..
http://help.sap.com/saphelp_nw70/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
Cheers,
Kris.

Upload LOGO into WDA application

Hi All,
please let me know how to upload a logo in SAP system in WDA application.
my Logo is saved in the system.
I want to display the logo in the output in WDA.
Thanks,
Raju.

Hi Alex,
i would like to upload my Company logo,but in the UI Image it shows existing images,i want to take the Image from the file where i stored in the system.
please provide step by step process..
Thanks in advance,
raju.

WDA application on Intermec

Dear All,
I had developed WDA application which is running fine in INTERMEC POCKET PC , but while scanning ONENTER EVENT which has been defined on input field is not getting triggered. But application such as BSP, ITSMOBILE AND SAP console are responding
to ONENTER EVENT. I am running application on Pocket PC Internet explorer
We are using Intermec CK3 with WINDOW 6.1.
Can you please suggest how trigger WDA application
Thanks ,
RK

Hi Rama,
My understanding is that WDA is not supported for mobile devices.
Check this link ...
Mobile support for WebDynPro ABAP
Rgds
John

WDA application problem

Hi,
i hav created a WDA Application and configured in portal.
from outside i can able to acces portal, but the iview which is WDA application is not working from outside.
do we need SAP GUI to access WDA Application through portal?
Can some one put some light on this.
Here i also test the URL http://netweaver.portal.com:8000/sap/bc/webdynpro/sap/zpayslip from browser center. Even this url also not working.
What setting do i need to change
Regards,
Renu

Hi
WebdynproABAP Application Integration with Enterprise Portal
1. create a component
2.go to main view create action trigger_event.
3.click on trigger event action
4.open code wizard.
5.select portal intergration call in that PORTAL MANAGER(IF_WD_PORTAL_INTERGRATION) AND METHOD (FIRE)
6. IT WILL WRITE CODE FOR U IN ONACTIONTRIGGER_EVENT.
7.change the code with portal_event_namespace ='com.sap'
portal_event_name ='test_event'
8.save and activate main menu.
9.embedd view to window and activate it.
10.create application activate it and run it.
11.Now got to system administrator ->system configuration->portal content and create new system .
12. select suitable system and proceed next.
13.in next screen give name of system,system id and id prefix ,click next then
14 choose option for editing and ur system is created.
15. choose connector in propety category
application host as hostname of applic server.
logical systen name as system name defined in backend
system type sap_r3
16. now do WAS configuration.
give the required field .
17.now do its configuration
go to r3 system use transaction SICF
default_host->sap->bc->gui->its->webgui->SAPGUI for html
right click on slect option test service open new window
do the setting as required.
Do the user management setting
18.then sld configuration.
19. Test the connection.
20.Now application is embedded in iview
21 u need to add this iview to portal frame work
i hope this work

Print wda application

Similar Messages

Maybe you are looking for