Print wirelessly with HP laserjet

I have a HP LaserJet 2055 dn. We have been trying to figure out how to print wirelessly. What accessory do I need for the printer. We have dell and mac laptops in the office. Any helpful information about printing wirelessly would be extremely helpful!

AT13,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

My HP dv4-2045dx won't print wirelessly with my HP Officejet 6500 E709n

My HP Pavillion laptop won't print wirelessly with my HP All In One printer. It will print if it is hooked up, and the printer works wirelessly with my other computer. I've uninstalled the printer and updated the drivers. The print wizard goes through all of the steps to configure wirelessly, finds my printer, tries to connect, and fails at the last minute each time. I believe it may have something to do with the fact that I also can't scan to my laptop.
P.S. It used to print wirelessly. I have no idea what changed.

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT1338 problems with Mac Book 10.7.5 printing wirelessly with HP Photosmart 6510e. I must turn off then turn back on for Mac to print.

HP Photosmart prints with PC, Droid phone but will only print wirelessly with MacBook OX 10.7.5 if I turn off printer and turn it back on. HP has tried, Belkin (router) has opened all ports, the problem persists.

That is great, but I recommend channel 11 instead of 10.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set up my PowerBook to print wireless with HP psc 2410

Can someone tell me how to set up my PowerBook to
print wireless with my HP psc 2410 all-in-one?
What do I need to do?
I checked ifelx list and check out ok for my model.
Thanks,
Kes
PowerBook G4 15 1.67GHz 10.4.2 512MB AirPort Extreme; iMac G4 20 1.25GHz Mac OS X (10.4.2)

Ensure that the Airport base station is configured to not distribute IP addresses.
On the iMac
System Preferences > Sharing > Printer Sharing
On the PowerBook
Applications > Utilities > Printer Setup Utility
Add Printer
It may work with the HP driver (which you will need to install on the PowerBook)
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.

Have a MacBook Pro with 10.8.1 and want to print wirelessly with HP 3054 610a, currently connected via USB. Router is Apple Extreme without WPS button. How do I enter the said and passphrase to the printer. Can't use the cd install-no Mtn.Lion support

Have MacBook Pro, Airport Extreme router, Mtn Lion 10.8.1 and want to print wirelessly with HP 3054 610a which was installed 2 days ago via USB. Prefer to set up the printer on the wifi network, but how do I enter ssid and passphrase. On the printer control panel only has WPS option.

You didn't look far enough .... http://www.hp.com/global/us/en/wireless/printer-setup-help.html
The next thing is to look in the manual that accompanied the printer for how to use the wireless setup wizard!
This is specific to your printer ..... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217452&lc=en&cc=us&dlc=en &product=5109847#N728

How do I get my computer to print wireless with HP6600

I have tried to get my computer to print wireless with the HP6600. I have tried all the trouble shooting things and still does not work. The printer is contected to the wireless network. I can print from my phone and Ipad fine without a problem.

@ minipinny26 - When you downloaded the drivers and attempted to install the software I am guessing the software could not find the printer. Is this correct?
If so, then did you try a power cycle on the circuit?
* Unplug router and wait 30 seconds
* Plug router back in and wait for it to completely repower up
* Restart the PC
* While the PC is restarting: Unplug the printer while the unit is on
* Wait 30 seconds and plug the printer back up for power
Can the software find the printer at this point?
If not, then can you ping the printer?
* Open the Command Prompt screen by typing CMD in the Run command box
* Type ping followed by the ip address of the printer.
Also, take a look at the steps in the document found here. Let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printing wirelessly with Windows Vista

Alright I just got our Vista laptop successfully connected to the TC wireless network.
Now I'm trying to print wirelessly with the Vista laptop, but when I go into "add printer" in the Vista control panel, it's unable to detect the printer. The printer is on.
My Macbook Pro is currently able to print wirelessly.
Anybody know what I can try?

I was able to add the printer on my Vista laptop with Bonjour on the disk that came with Time Capsule. Previously the laptop couldn't see the printer, but now it can wirelessly print.
This manual was helpful (p. 61).
http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf

Why can't I print wireless with Time Capsule anymore?

I have an Epson Stylus Photo 1280 that I have been printing wireless with for many years by plugging it in to the USB port on the back of the Time Capsule. Not anymore.
I have a MacBook Pro running the latest OS as well as the latest model Time Capsule running the latest software from Apple. I have tried using Airport Utility 5.6 which sees the printer plugged in. But when I try to add the printer to the Print & Scan system preferences, it shows up but says:
Software for this printer is available from Apple. Would you like to download and install it?
When I click "Download and Install" it searches for the software but then tells me:
The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software.
When I plug the printer directly into my MBP, I can add the printer and print without any problems. Per Epson, I have the latest software for my printer, so I'm not sure why Apple needs to search for the software and download it in order for me to print using the Time Capsule.
Like I said before, this all use to work flawlessly. I'm assuming all the updates have "broken" something.
Thanks in advance for any help and suggestions.

Well, I solved my problem.
I deleted the EPSON folder in Library/Printers as well as Library/Cache and installed the EPSON driver via Softwar Update.
Everything is working fine now.

I cannot get my HP OfficeJet 6700 to print wireless with my macbook Pro, I cannot get my HP OfficeJet 6700 to print wireless with my macbook Pro

I cannon get my HP OfficeJet 6700 to print wireless with my Macbook Pro? Any suggestions?

Just found a solution to this problem via HP technical support by changing my Officejet 6700's dynamic IP address to a static IP address:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/OfficeJet-6700-prin ts-test-page-but-not-Word-or-other/m-p/2257137#M51621
After making these changes and rebooting my printer immediately started working again.

Unable to Print Wireless anymore HP LaserJet Pro 200 Color M251nw

I've owned my extremely good HP LaserJet Pro 200 Color M251nw for around 10 months now but all of a sudden it has stopped printing wireless. If I print via a USB it works fine. I have downloaded new drivers and Firmware, done numerious restarts on both mac/pcs and printer but this still hasn't fixed the issue. I have run a number of Network Tests and all are coming back OK. When I try to configure the machine using the Online Printer Utility it cannt connect to my network (even though the self diagnostic test on pritner tells me everything is OK. I am running a mixture of both Mac and PC's and cant print from any of my devices. Bonjour print is enabled on the pritner but i cant see a bonjour IP address on my Mac.
Printer is still under warrenty but obviously feel that this is a last resort.

Hi @bluemango,
I see by your post that the printer stopped working over the wireless network. I can help you with this.
Restore the network defaults on the printer.
Go to setup, network setup, restore defaults.
Power cycle the router and computers.
Then run the wireless setup on the printer.
Go to setup, network setup, wireless menu, wireless setup wizard.
Print off a configuration page, to make sure the printer has a valid IP address.
Printing a Configuration Report. Print the report from the printer's control panel.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer or Safari)
If it loads the printer's network page then the printer is on the network.
On the Mac, try and add the printer through Printers and Scanners or run the installation.
On the Windows computer, run the add printer wizard through the printers window or run the installation.
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Re: OSX Lion printer problems with HP Laserjet 4200

I have updated the driver for the HP LaserJet 4200 series printer to ver. 18.2. The computer communicates with the network, via a Linksys Wireless-G printserver, WPSM54G, and is sending something to the printer, but the printer prints only what appears to be identifying information, then raw code. Has anyone else had this problem? I use this OSX with three other printers, two of them wireless, with no problem.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Printing problems with hp laserjet cp1515n [found problem]

Dear Arch users,
A couple of weeks ago I installed for the first time an Arch linux on my brand new Dell laptop with an UEFI MB. It took a while until I could understand how UEFI works but eventually I sort it out and got Arch installed. Unfortunatelly there are some small problems to be straiten out. One of them is the fact that printing with my laser printer (see subject line) is not working.
for the last couple of days I was searching through all post I could find around on the internet, mainly here at the Arch forum. Unfortunatelly I could not find anything nearly describing what I am living on my system. Well here is a brief description of what is happening. After installing Arch, I opted for KDE desktop environment and I made the full instalation. After installing additional software (gimp, inkskape, etc.) I needed to install my printer. At first I couldn't get permission. Than reading the Arch tutorial for CUPS, I saw that the 'lp' permission was not setup properly. Well Have done as described there. Then I tryed to install using the GUI from KDE for installing an usb printer and for my surprise there was not such an option. I intalled than de hp-toolbox, and than it was easy to install the printer. It was automatically recognized and everything was there. The problem was, when I open an archive (text, web page, doesn't matter) and send it to print, the spooler went well theoretically sent to printer and then popped up a notification saying printing finished. Opening the printing cue, I can see that the archive was still there and marked as pending. That was the point where I started to search around for potential solutions or similar solutions.
After sudying a lot I came to a conclusions that it probably have something to do with permissions. Unfortunately I could not find out where or which permissions to change in order to get something printed. I found some "debugging" and information commands and I am posting the results here;
# systemctl status cups
cups.service - CUPS Printing Service
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled)
Active: active (running) since Tue 2013-01-29 13:26:21 BRST; 4h 43min ago
Main PID: 525 (cupsd)
CGroup: name=systemd:/system/cups.service
└─525 /usr/sbin/cupsd -f
Jan 29 17:39:46 XXXX-archs hp[12186]: io/hpmud/musb.c 588: invalid usb_open: Permission denied
Jan 29 17:40:14 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:43:27 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:19 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:26 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:51 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:45:05 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:35 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
# systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (running) since Tue 2013-01-29 13:26:10 BRST; 4h 45min ago# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
Jan 29 13:26:10 XXXX-archs systemd[1]: Starting CUPS Printing Service Sockets.
Jan 29 13:26:10 XXXX-archs systemd[1]: Listening on CUPS Printing Service Sockets.
# lsusb
Bus 001 Device 003: ID 03f0:4417 Hewlett-Packard EWS UPD
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 0c45:648d Microdia
Bus 004 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
# lpinfo -v
network ipps
network smb
direct hp
network socket
network http
network ipp
file cups-pdf:/
network lpd
network beh
network https
direct ptal
direct hpfax
# usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=4417 Rev=01.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Color LaserJet CP1515n
S: SerialNumber=00BRAS85501Y
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
The out put from the last command (usb-devices) I only copyed the relevant part from the printer in question.
the couple of last lines of CUPS error.log are;
E [29/Jan/2013:17:44:48 -0200] [Job 14] Stopping unresponsive job.
E [29/Jan/2013:17:52:25 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:17:52:41 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:18:05:47 -0200] [cups-deviced] PID 14408 (dnssd) stopped with status 1!
E [29/Jan/2013:18:16:37 -0200] [cups-deviced] PID 15151 (dnssd) stopped with status 1!
I hope somebody could help me out to find where to change permission (if necessary) or point me out to an different road.
Thanks
Last edited by camarao (2013-02-08 02:36:36)

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

Printing problem with HP LaserJet Printer since Mavericks Installed

Hello,
I'm working on iMac and I have recently installed OSX Mavericks.
I have now printing troubles with my printer HP LaserJet P1102w.
Sometimes it prints, sometimes it doesn't.
When it doesn't print I often need to suppress the file in the printer task and then print again. And there it works.
I have tried to solve the problem by installing all the HP drivers, and also made a Reset printing system, but it does'nt change anything.
Any Idea ?
Thank you for any help.
François

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Can't print wirelessly with HP 7410 printer using Airport Extreme

I've got 3 Macs (2 laptops, one desktop) that I was using successfully with my wireless HP 7410 all in one printer using my old Airport Base (snow) Station (822 b & g). Just upgraded for a variety of reasons to the new Airport Extreme Base station and I have NOT been able to get the printer to print wirelessly.
I have tried all available normal methods, including, but not limited to:
1) resetting and restarting the printer and computer
2) installing new printer software, including driver
3) deleting and reinstalling printers using the "print and fax" system preference
4) using the printer on a non-secure network
5) setting up the printer to connect via IPP and LPP
The end result of all of this is that the printer is attached to the network, but the computer (any of the 3) cannot connect to the printer. When I run the HP setup assistant, it cannot "find" the printer.
Everything was working perfectly before I "upgraded." Why am I not able to print with the new base station?
Your help would be greatly appreciated.

I have the same proble trying to print. I have a Mac and 2 PC laptops. I tried to print to three different printers and it will not work. I called Apple support and I was told that it was set up and configured correctly, that it ust be my firewall blocking the printer. I'm at a loss after $179.00 and three hours of trying to get it to work.

Print wirelessly with HP laserjet

Similar Messages

Maybe you are looking for