Print with lr5 vs lr3

Recently upgraded to lr5, now when I print a custom package it prints unwanted borders and cut of portions of images.
Printing in lr5 to Canon Pro9000 MarkII, custom package using 8.5x11 paper with 5 different size cells. Each cell is adjacent to outside edge. Paper is set up to print borderless via "Print Settings and Page Setup" and 0 margins in lr. When print is complete there is about an 1/8 inch border all around entire 8.5x11 sheet and the images are significantly chopped.
FYI no borders show when looking at the print view/module in lr and the edges of the sheet show 8.5x11 in accordance to ruler/guides.
When I perform the exact same print with exact same settings and images in lr3 it prints with no border and no cutting of images.
Any ideas???

Sorry for the late response. I have not yet tried a new driver from canon, but I will as soon as I get a chance. I am a little sceptic about it being a canon driver issue as I believe the drivers are written to work properly with OS releases and not necessarily 3rd party software applications such as lightroom, and like I said lr3 works just fine today with the current driver.
Just to be clear I agree with Rikk that it appears that lr5 is having issues telling the canon driver how it wants the image printed on borderless paper which obviously seams likely that it could be a driver issue. So it would be silly for me not to try reinstalling a fresh driver straight from canons site.
Work Around... Currently to combat this issue this is what I am doing. I set the page to be 8.5x11 with ".12" margins (not borderless) then I set up my cells and place them as far against the edge of the borders (that lightroom is showing on screen) so that I can get the images to fit and arranged properly then print. This works flawlessly (when printing with a bordered paper setup), all images print in cells with no obvious cropping.
Another approach that I could us as a work around is to use lr3 but hey I paid for lr5 so this will work for now, unless I can determine the cause.
I will update this post if I get a chance to reinstall driver.

Similar Messages

LR3 won't print to my printer with postscript driver

System config below. Can print to USB attached Epson R1800 no problem. Can print to network attached HP2840 with the PCL drivers (though it comes out in black and white not colour). Can not print to HP2840 using Postscript drivers through either its USB or network port. Process monitor shows print engine thread consuming 1 CPU for each print job launched. Cancelling the print job in LR3 does NOT kill the print engine thread (!), leaving LR3 consuming 50% of my total CPU resource when I've tried to launch 2 print jobs. This worked fine under LR2.7 and all previous. No changes to printer drivers / config since LR3 upgrade.
Anybody with any suggestions and or experience (good or bad) with other postscript printing would be appreciated.
cheers
Rod
Quad core 3.4GHx, 8GB 1066Mhz RAM, System on SSD. Catalogue on (huge and fast) workstation RAID. nVidia GTX8800. Dual screen

Sigh...
Rebooted several times still same problem.
Installed latest Windows updates and rebooted, printing now works.
...I am sceptical that it was the windows updates, and something about one of the reboots I suspect just cleaned a cache somewhere or allowed a clean LR3 load without some memory glitch.... I suspect I will never know....
computers - dont'cha just love 'em?
cheers
Rod

Unable to print with Epson 3880 in LR3

I am no longer able to print with LR3 on my Epson 3880. I have printed lots of photos on it in the past and when I have tried to print on it in the last few weeks, I go through the normal process on my Mac Pro with Snow Leopard (10.6.8) and everything appears normal. LR3 processes the photos and the Epson Icon pops up on my task bar and it shows the job as having been completed - but nothing prints. The computer believes that it has successfully printed my photos.
I have tried deleting and adding the printer, but that has not helped. I have also tested my connection through the Epson Status Monitor. I can print a test page with that utility and check for the need to clean the print head. The computer appears to be able to talk to the printer, but it won't print photos.
One other thing that appears a little unusual is that I can select a specific colour profile to use for my specific photo paper, but I can no longer find the setting in the printer driver that states 'Turn Off Colour Management'.
I have checked the software update twice and I have the latest updates installed.
I am stuck and need to print some photos for family. Any suggestions are appreciated!
Don

That is a good tip Andrew. I believe that the driver was updated in the last couple of months and as I am not printing on a regular schedule, I didn't notice the problem. With the fresh install from the Epson site, everything looks the way it should.
I am going to follow your advice and not update via Software Update. I will install directly from Epson. This is the first time in three and a half years on the Mac that I have had an issue like this.
Thanks,
Don

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even previe

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...

How do I use a regular printer with my iPhone?

How do I use a regular printer with my iPhone?

you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Unable to print with my Canon PIXMA IP 4700 and JetDirect network appliance

After many tries I decided to post my question.
I have a Canon PIXMA IP 4700 connected to the network with a Jetdirect 175X box. So I tried to add a new printer with a "HP Jetdirect Socket" port. I have previously installed the driver from the official website. The test page is staying on the spooler.
I also tried with LPD port (supported by the Jetdirect box) and IPP but nothing is working.
When the printer is directly connected with USB, it's working fine. Printing from my others Windows computers is working fine too since many months.
Thank your for your help.

Hello and welcome to Apple Discussions.
Your problem is being caused by the Canon driver. It cannot be used when the printer is connected to the USB port of a 3rd party print server, or if shared by Windows.
The solution is to use a driver like Gutenprint or PrintFab. Gutenprint is preferred because it is free (it ships with OS X) however the iP4700 is not listed as a supported model. The iP4600 is listed so you could try selecting this model in the Print Using menu (shown as Canon PIXMA iP4600 - Gutenprint v5.2.3). If the iP4600 Gutenprint driver does not work that well then you could look at using [PrintFab|http://www.printfab.net] which does support the iP4700. It costs €49 but there is a 30 day trial so at least you can try it before committing to buying.
Another option would be to use a Airport device, like the Express, instead of the Jetdirect print server. With the printer connected to its USB port you can then use the Canon iP4700 driver on the Mac.

How to print with HP Deskjet 2510 with Imac G5 on Tiger ?

Hi Folks
I desperately need some helping hand....
Today my old trusty printer died (HP 1510 print/scan/ copy) and I ran to buy another one because I need to finish some tax paperwork.
In a mad hurry, I didn't pay any attention to tech specs and I went home with brand new HP DeskJet 2510 All In One device. But !!! : ((
In my home office I still use Imac G5 with 10.4.11 which is still pretty good comp for office work but I found out that the HP 2510 don't officially support my Imac with Tiger. Only from 10.6 and later.... I know that Imac G5 can't run nothing above 10.5.
So, is there any way to "force" HP 2510 to somehow recognize my Imac G5? In "about my mac" on USB port, the HP 2510 is visible ....
Many thanks in advance.
Cheers,
Sven

So, is there any way to "force" HP 2510 to somehow recognize my Imac G5?
You may be able to get it to print with something like this:
http://gimp-print.sourceforge.net/MacOSX.php
although i do not see taht modle on the "Supported Printers" page. You might look again.
BUT that workabout does not support scanning, only printing.
I think you need to return the printer and look to either Canon or Brother. Brother especially has been better about suporting older Mac OS versions but you'll still need to get a model number and search the maker's site BEFORE buying to see if they show older drivers for download.

Remote printing with iPad

I have installed the HP Print app on the iPad and have no issues printing when I am on the local net work. When I try and print when I am not on the network I receive an error that states: "oops we cannot complete the print job please try again" and there is a retry or cancel selection. My printer is set up with an email address. I can print from my Samsung note 2 using the HP Print app with no issues either on the network or off. Any ideas?

Have you tried the ePrint mobile app?
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/How-to-Print-with-an...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

How to connect my cannon mx470 series printer with bluetooth to my mini mac?

how to connect my cannon mx470 series printer with Bluetooth to my mini mac

Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Report printing with BI pubisher - 500 Internal server error

Hi,
I was having problems using BI publisher to print with. I thought we didn't have it at first, however since found we do have BI Publisher Enterprise edition.
When I put the settings into APEX, reports don't display as expected. I get
report error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.Now if I navigate to the URL in my web browser, http://[server]:[port]/xmlpserver/convert, I get a 500 - Internal Server Error page. The requets is definitely hitting something because if I change "convert" to say "convert1" then I get 404 (as expected). So it seems as if convert is found but then a problem occurs.
If I navigate to just http://[server]:[port]/xmlpserver/ then I see the BI publisher enterprise login screen.
Any ideas what might be causing this or what I could do to resovle it?
Our APEX instance is on a unix box and BI on a M$ box if that matters (long story)?
Thanks

Ignacio Cobos wrote:
Hello
>
> I get this error when i try to access to Bex Analyzer
>
> ERROR: URL used, "http://sesue:50300", is not fully qualified.
> A fully-qualified URL has a schema with the format "<protocol>://server.company.com:<port>". URLs with the format "<protocol>://server:<port>" or "<protocol>://<ip address>:<port>" are not fully qualified.
> See SAP Notes 581329 (Not possible to implement) , 596698 (Not possible to implement) and 654326 (Not yet released)
>
> Can anybody say me any idea how to solve the problem?
>
> Thanks in advance
Dear Cobos, For FQDN related issues : Set profile param "icm/host_name_full" with corresponding FQDN via RZ10 transaction. Also check login/create_sso2_ticket & /accept_sso2_ticket parameters in the profile you have created. Instead of "http://sesue:50300" you may to have the URL like "http://sesue.domain.com:50300//SAP/BW/BEX/". Please refer this #scn article for more details : http://goo.gl/QPlrx Similar Issues : http://goo.gl/mRCh0 Hope it helps. Thanks.

Printing with PSE 8 for Mac

Hi,
hope some of you may give me some help.
Have tried to print with PSE 8 for Mac, but in the printing options there is none where i can choose the type of paper (ie: glossy, premium glossy....).
My printer is an Epson Stylus Photo 1400.
It works fine with iPhoto, here i can choose paper type. And prints come out fine.
Thanks for any advice,
dangerly

My printer is a Canon so not entirely sure if this helps but when I print from PSE 8 I do not get to choose the media type until I have clicked on the print button in the PSE dialog box. I am then presented with the dialog box for my printer where I can set the media type amongs other attributes.
It is normal for the media type to be the job of the printer driver so perhaps it is the same for your printer.
Jim Graham

Print with lr5 vs lr3

Similar Messages

Maybe you are looking for