Print won't show repositioned image

I'm using PSE3 on Windows XP. All my images are with an aspect ratio of 1.33 and I'm printing on paper with aspect ratio of 1.5. I'm resizing the image to a width of 6" and thus the height is more than 4.0". To get the bottom part of the image showing I uncheck 'Center Image' and enter -0.35" in "Position - Top'to be sure that the bottom part is showing. The Print Preview does show the image as I like to have it printed, but the print shows the image like it is still centered. What do I need to do to get it 'uncentered'?

Bert,
I'm not sure I understand you correctly. Are you trying to tell the printer to print a 4.5 tall image as as 4" tall one just by repositioning it? I'm far from a printing expert, but I don't think that is possible. You have to crop it to the right size.
Or maybe you can flip it upside down. Then it will leave out what is now the top.
Also, when you say "Print Preview Dialog", are you talking about PSE's dialog? I don't have PSE3, so don't know exactly what you are seeing. You need to set the printer's own dialog. The one that comes up when you click "Preferences", before you click the final print command.
If you ever find out how to do it your way, I'd be interested to know. I sometimes like to print odd-sized greeting or thank you cards. My solution is to cut them out after they are printed. Not ideal!
Rita

Similar Messages

  • Office 2007 won't show embedded images

    For some reason Outlook 2007 has stopped showing images.  When you click the bar to download pictures it trys to load them but displays the red x to tell you they can't be loaded.  I have read quite a few forums to try and find a solution and I have tried a few things:
    - recreated the outlook profile
    - emptied the temp folder
    - changed the location of the temp folder (HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Security\Securetemp)
    - turned off antivirus (although there are no privacy components in the antivirus in use)
    - reset security zones in IE
    - changed trust settings
    Would anyone have any other suggestions of things I can try or a way of perhaps diagnosing the problem?
    Thanks in advance
    tooner

    Vinod,
    That worked for me. I have tried so many items that it is great to finally figure out what the problem was.
    Thank you so much!
    Gene
    With the relevant email message open click on the Office button in the top left>click on Editor Options on the bottom right>click on Advanced on the menu on the left>then under 'Display e-mail content' uncheck 'Show picture placeholders'.
    Vinod |CCNA|MCSE 2003 +Messaging|MCTS|ITIL V3|

  • USB Printer won't show on client machines anymore

    This has happened three times now and the only way I've been able to resolve it is to delete the printer set up on the server and then create a new one.
    I have a Canon iP4200 connected to a Power Mac running Server 10.4.8 and the printer is connected via USB.
    I set up the print service and check LPR and Show name in Bonjour. Those are the only two settings I use.
    After doing this from anew my other Macs will see the printer in the Printer Browser via Bonjour and the printer will add to each computer and each computer can successfully print to it.
    Then after a few months you'll print and nothing ever happens. The local machines will just have "printing" going forever, nothing ever shows up on the server.
    On the server I can still print to the printer. I can stop the Print service and restart it with no effect. Rebooting the server also has no effect. The only thing that works is to delete the printer on the server and re-set it up.

    - You said "all of my songs I had on Itunes don't show up on my computer but they are still on my iPod.  ". What do you mean by " I had on Itunes don't show up on my computer"? iTune sis on the computer, not on the iPOd.
    - To copy non-iTunes purchases from iPod to to computer yo need a third-party program like one of those discussed here:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Aperture won't show the images I want to import

    I don't use Aperture to manage my images, but import those I want to work with from folders on my Mac. When I try to import images from a recently acquired Panasonic LF1 camera Aperture only shows movie clips and not the JPEGs. The Import Settings for file types does not exclude anything. Importing is fine  from other folders.
    Thoughts, please.

    When I try to import images from a recently acquired Panasonic LF1 camera Aperture only shows movie clips and not the JPEGs.
    And how are the settings in the "raw&jpeg pairs" brick of the import panel? If that is set to "raw only", your jpegs will not be imported. Set the raw&jepg option to "both, jpeg as master"
    The raw format of your camera does not yet appear to be supported.
    http://www.apple.com/aperture/specs/raw.html
    Regards
    Léonie

  • How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

    how do i fix my printer when it won't show the print preview for web pages?  it worked for a while and now it doesn't.  printer is an hp officejet 7310 all-in-one.

    I would suspect this is a hardware issue.  The rollers are probably having issues picking up the relatively smooth thick media.  You might have better results be cleaning the paper pickup rollers with a damp paper towel.  Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
    Regards,
    Bob Headrick, MS MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Images won't show up when I try to upload online

    Hi
    I need help to figure out why my photos won't show up when I try to upload them online (e.g. Facebook, Pinterest, Google+). All of my photos are in iPhoto and it used to work fine until I updated to ver 9.3 a coupe of days ago. When I open iPhoto, it shows all the images but when I try to upload something, I couldn't find my photos so I end up copying them to my desktop first which is very inconvenient, especially if I am uploading severa photos. It works alright when I attach photos in Outlook though, so I'm not really sure what I'm doing wrong here. Any help is much appreciated. Thanks a lot!
    PS I did some screen shots if that would help explain things better. By the way, my OS version is 10.7.4, if that is relevant at all?
    This is my iPhoto right now.
    This is how it looks like when I open Photo Browser or attach an image to an email via Outlook.
    This is what it looks like when I try to upload images on to Facebook, Google+, Tumblr, etc.

    Where did you get the phone?
    If you see an ICCID unknown in Settings>General>About, that indicates a catastrophic failure. Very often this is caused by hacking or jailbreaking the phone. It can not be fixed. The phone will have to be replaced.

  • Problem: Images won't show up in animation.

    I'm trying to get a series of images to animate in an applet. So far I haven't been able to work out what I've done wrong/altered incorrectly, because all I get on the applet is a blank light grey background. None of the pictures will show up, even though they are in the same directory.
    The images are named F0.jpg, F1.jpg etc all the way up to F10.jpg.
    Any help would be most appreciated since I can't see any part of the coding that would affect the images not showing up.
    Thanks!
    import java.awt.*;
    public class FMAni extends javax.swing.JApplet
       implements Runnable {
       Image[] picture = new Image[11];
       int totalPictures = 11;  // determines how many different images will be displayed.
       int current = 0;
       Thread runner;
       int pause = 500; // specifies the speed of the animation.
       public void init() {
         for (int i = 0; i < 11; i++) {
           String imageText = null;
           imageText = getParameter("F" +i+ ".jpg");
           if (imageText != null) {
             totalPictures++;
             picture[i] = getImage(getCodeBase(), "F0.jpg");
           } else
             break;
         String pauseText = null;
         pauseText = getParameter("pause");
         if (pauseText != null) {
           pause = Integer.parseInt(pauseText);  // converts the text into an integer.
       public void paint(Graphics screen) {
         super.paint(screen);
         Graphics2D screen2D = (Graphics2D) screen;
         if (picture[current] != null)
           screen2D.drawImage(picture[current], 0, 0, this);
       public void start() {
         if (runner == null) {
           runner = new Thread(this);
           runner.start();
       public void run() {
         Thread thisThread = Thread.currentThread();
         while (runner == thisThread) {  // causes following to loop until something causes the two thread objects to have different values.
           repaint();
           current++;
           if (current >= totalPictures)
             current = 0;
           try {
             Thread.sleep(pause); // determines how long each image is displayed until the next image is shown.
           } catch (InterruptedException e) { }
       public void stop() {
         if (runner != null) {
           runner = null;
    }

    I think so. Why not have a look and be sure? Simply print the references.
    The images are all in the same folder as
    the java files. I've tried tweaking that part
    slightly to see if any slight alteration might make a
    difference, but so far I've found nothing works.That only means that you didn't get it correct in other attempts. You can't conclude that it's correct from that...
    Then again, I'm not all that experienced with java.
    So I could be screwing up royally and not really
    knowing it.Haven't touched Applets for a long time, but since you ask here rather than at the Swing forum, I have three guesses:
    1) Image file can't be read by Java. But I think it can handle jpgs.
    2) Image file not found.
    3) Image file found but not yet loaded. Try using ImageIcon instead in that case. it blocks until the image is available.

  • Some image imports from Photoshop won't show in After Effects

    I NEED HELP ASAP
    I'm creating an app and I used Photoshop. Imported the psd file into After effects. But somehow all the images won't show, only text.
    I'm trying to animate it so it looks like a normal scroll up and down from an iPhone. But all the images which are off screen won't show up once I drag it into screen but at the same time the text are all fine. What is wrong? I definitely imported the psd file correctly, since I did it with another project a couple days ago.
    Please help. Due date is Monday.
    The only thing what's differnt is. The images are all in a clipping mask in Photoshop. All the circles are white shapes and I put the images as clipping mask to that.
    Once I scrolled it up I can't see the images.This is how it suppose to be

    Did you try to make your Photoshop canvas larger? I'm pretty sure that would solve it.

  • Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

    I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
    I'm using Preview Version 7

    Hello @kgingeri1, 
    Welcome to the HP forums.
    If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
    If ePrint works fine, it is definitely a Google Cloud Print issue.
    Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Hours:
    Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
    Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
    Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
    Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window.

    Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window

    The iPhone icon appears in the import window, but the images won't show up in the loading window
    Do your images show, if you disable the option "Do not import duplicates"? If yes, then check, if the images have already been imported, eg. using Photo Stream, if you are using Aperture 3.3 or later.
    Aperture 2, Mac OS X (10.6.8)
    Is your profile signature above still current?

  • Word for mac won't show doc in print preview and prints blank page.

    I have a document from layoutready.com that I have been editing and it is a .doc file originally and won't show up. I've tried saving it as .docx and still nothing. Also, when I create a new document and put in a shape or a text box, it won't show up in print preview or print either. Excel is fine. I can insert a shape onto a worksheet and previews and prints fine. I have sent a document to a friend to test and when they open it in their word (on a pc) it previews and prints fine. I called stupid %*&#@ Microsoft and they want me to sign up for $99 Office 365 to get support. Ergh. Should I try to re-install Word? Oh, and I also updated to Yosemite last night.

    Then post your question on the Microsoft Mac forums since it's their software you'r having problems with.  These forums are for troubleshooting Apple products
    http://answers.microsoft.com/en-us/mac

  • Images on Tumblr and embeded videos won't show up

    The image/gif problem is only on Tumblr (as far as I saw), but it's as if the images weren't even there. (the way I see it, it only happens when I'm browsing through someone's tumblr, but when I enter a tag every picture showes, and on my dashboard as well). when I press reload, it reloads the entire site without the pictures. I tried a link on internet explorer and google chrome: it showed the pictures on IE, but not on GC. At first I thought it was because I didn't update firefox, but it showed up even after I updated everything (including adds-on). I also cleared my cookies and cache, and tried other things but nothing worked.
    Embedded videos won't show up anywhere.

    If images are missing then check that you aren't blocking images from some domains.
    *check the permissions for the domain in the current tab in "Tools > Page Info > Permissions" or all domains via the about:permissions page
    *check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images, the permissions.default.image pref should be 1.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Images won't show in pdf file

    I create a file in Publisher and insert images as .gif files (have also saved as .jpeg). No problem. But as soon as I convert them over to pdf the image is replaced by a gray box. Now if I print the pdf file the images show and print just fine. Why would they change during conversion? Also this just started today. When I left work on Friday my images were just fine in pdf. The only thing I was attempting to do was adjust the display preferences so the pages started out smaller rather than zoomed out to 151%, which it was defaulting too.
    Any help would be greatly appreciated
    Sara Dreger

    Thanks so much. I have no idea how that got turned off, but it was.
    Thanks again
    Sara

  • I have a late 2006 iMac upgraded to lion, Quicktime doesn't work anymore. Preview won't show images, any ideas anyone?

    I have a late 2006 iMac upgraded to lion, Quicktime doesn't work anymore. Preview won't show images, any ideas anyone?

    You are correct....it will not work. Please carefully read Apple's Target Display Mode: Frequently Asked Questions (FAQ)

  • My print preview constantly shows and prints a 4x6 image even when I'm in everyday printing and, even after I have manually entered 8.5x11 it will still act as if it's in photo mode.

    Why can't I get my print program to show anything but a photo 4x6 image (and print that) even when I am in "everyday printing" and even when I manually enter a 8.5x11 paper size?

    Changes to Printer Properties settings need to be done through Firefox, not the global printer settings.
    [http://kb.mozillazine.org/Problems_printing_web_pages]

Maybe you are looking for