Printable area / Hardware margins of a Photosmart 6510 all-in-one

I need to know the hardware margins (a.k.a printable area) of my 6510 printer. I am sure this information used to be in the technical specifications but I cannot find it there now. I specifically need to know the margins in both duplex and non duplex modes. The margins I am referring to are those imposed by the printer firmware and physical hardware, not those imposed by software or drivers.
Thanks,
Roger

Hi there Roger! Welcome to the HP Forums
@rogerjames99
I have also checked the User Guides and specs and they no longer contain the information you are looking for unfortunately. I am not sure if technical support would have any different information however, if you would like to give them a call, I will leave their contact information below for you.
Call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

How can i print envlopes on the photosmart 6510 all in one printer

I am not able to address envelopes on this printer.

Windows PC - http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02997998&cc=us&dlc=en&lc=en&product=5058336&tmp...
Mac - http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03000564&cc=us&dlc=en&lc=en&product=5058336&tmp...
Let me know if you need and further help. Thanks!
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP Photosmart Premium all-in-one C410a. The photos are coming out dark, what is happening?

The photos are dark. I am sending the photos wireless from my Toshiba Netbook NB205-N325BL with Window 7 Starter to my HP Photosmart Premium all-in-one C410a. The photos are dark when i send the photo from my iPhone 3Gs too. I have changed out the ink cartridges to see if that was the problem since the ink cartridges were low.
I have recently purchase this printer. I recently had a Photosmart All-in-one C7280 and was very happy with it until it stopped working with Win 7.
Your help is appreciated.
thank you,
Paula

Laura,
There are quite a few trouble shooting steps in my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0]. But to cut to the chase, first make sure you can run one of the Apps on the Printer and its getting content. Then make sure the firmware is the latest (Tools->Web->Automatic Updates->Check for Product Updates). Then power cycle everything (Router, Printer, iOS device). If it's still not working, more likely then not its a problem with your wireless router and Bonjour, so post back what brand of router you have, the model, and how your network is configured.
Just trying to help.
Andrew

Are there any updates so i can use my HP Photosmart C4780 All in One Printer wirelessly?

just wondering..are there any updates for the iMac with OS X (10.8.2) so I can use my HP Photosmart C4780 All in One (Print,Scan,Copy)?

Hi,
An HP Full Feature Software is not available for Mountain Lion, therefore the Wireless configuration is tricky and cannot be done through the software.
To connect the printer to your wireless network you will need to create a temporary wireless ad hoc connection, then the wireless connection to your router can be configured via the EWS page:
Step one: Restore the printer's network default settings
Touch the ATM button ( ) next to Wireless / Scan .
Touch the ATM button ( ) next to Wireless Menu .
Touch the ATM button ( ) next to Wireless Settings .
Use the up and down ATM buttons ( ) to select Restore Network Defaults , and then press OK .
Touch the ATM button ( ) next to Yes to confirm your selection.
Step two: Networkly connect the Mac to the printer by creating a temporary ad-hoc connection
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select the printer's SSID, it should be listed as HPSETUP or should contain HP or C4700 within its name.
Click Connect
Allow two-three minutes to fully establish the network connection.
Step three: Connect the printer to your router via the EWS page
Open Safari.
Click the Bookmarks icon ()
Click Bonjour.
Double click the printer name, the EWS page appears.
Open the Networking tab.
From the left pane select Wireless.
Click the Start Wizard button and follow the steps to connect the printer to your router.
Step four: Reconnect the Mac to your router
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select your router SSID.
Click Connect
Allow two-three minutes to fully establish the network connection.
Now the printer should be connected to your network.
Open Print & Scan, click the Plus sign and add the printer listed as Bonjour.
btw John Galt - I this it should be spelled as OS X, please correct me if i'm wrong.. ;-)
Hope that helps,
Shlomi

Printing on Printable CD's With Photosmart Premium All in One C309a

I have a Hp Photosmart Premium All in One C309a that has the capability to print CD labels or Print directly on CD's, using Avery design pro label software 5.5, the printer gives an error message saying the CD tray is open. In order to print the tray needs to be closed. I've tried other label software but haven't found one that will communicate with the printer. I'm wide open for any and all suggestions.

Hi,
The link below for Printing Software may be of help
http://www.hp.com/global/us/en/consumer/digital_photography/free/software/printapp_index.html?jumpid...
If you're still having issues let me know and I'll follow up with other folks that know more on this topic...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP Photosmart C4180 All In One ... won't scan at all

According to HP, I have all the latest HP Photosmart C4180 "All In One" Drivers Installed.
According to PackardBell (my pc) it is all installed to Windows 7 with a 32 Bit Operating System.
The problem I get is that I start the P/C ... Then I opened up the HP "Solution Centre" on the desktop ...
It tells me "Your HP Photosmart C4100 series is ready"
In the middle of the screen it says "Start An Activity" then there is a button that says
"Scan Document" ... I press on this button and it seems to do nothing!!! ...
Please Help?? ... gooseman57

Hi there @gooseman57 !
Thanks for contacting the HP Forums!
From what I can see from your post, sound like the scanning software for the HP Photosmart C4180 is not responding. I should be able to provide you with a resolution for your issue.
A good place to start with an issue such as this, is to restart the computer and the printer. I would suggest trying a photo copy on the printer to ensure the printer hardware is OK!
If you continue to experience this problem I would then suggest uninstalling and reinstalling the HP drivers.
I have provided a link with instructions on uninstalling the printer software and another link to the HP Photosmart C4100 All-in-One Printer series Full Feature Software and Driver
There are also other ways of scanning we can explore. For example, you can scan using the program Microsoft Paint. All you need to do is:
1.Open PAINT
2.Go to "FILE" dropdown
3.Click: From scanner or camera
3.Choose your printer
4.Choose what type of scan you would like
5.Click SCAN
6.Click SAVE
Here is a link to a YouTube video for scanning using Microsoft Paint: Scan with your All-in-One Using Windows Paint (Windows 7)
Let me know if this was useful information and please post back with the results of your troubleshooting.
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

HP Photosmart C7280 All-in-One , Mac 0SX 10.6.8 Error message:' pump motor stalled

HP Photosmart C7280 All-in-One , Mac 0SX 10.6.8 Error message:' pump motor stalled' press (I don't recognise the icon!)
What is the button & what is the solution?

Hello, I don't have a floor model of that printer available and the manual for this printer does not mention the pump motor. But I would first try removing and reseating all the cartridges in the printer and power cycle the machine. If you are still getting that error message I would do a hard reset that involves removing the cartridges. No user settings are lost with a hard reset and it is a very common tool used to try to resolve a hardware issue with a printer. To do a hard reset with removing the cartridges:
While the machine is powered on take all the cartridges out of the machine. Close cartridge access.
Then pull the power cord out of the rear of the Product, and then unplug the cord from the wall outlet.
Wait at least 20 seconds.
Plug power cord back into wall outlet and then back in the rear of the printer. It should power on by itself but after 10 seconds or so use the power button to turn machine on
Wait for printer to go through start up process and as it recognizes the cartridges are missing (the display panel will inform of missing cartridges) put them back in their slots.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Photosmart C309g All in one

Recent Issue with printing ....Printing in landscape offsets 5 cm to the right (off the page) All margins are set ok and preview appears ok. Any suggestions as to why this might happen and how to solve the issue? Portrait format is ok

Hi there @comicsans , welcome to the forums!
I am responding to your post about the printing issue you seem to be having, as your print outs seem to offset by 5cm when printing in landscape, and all print settings and the print preview are and appear to be correct.
I am going to let you know what my personal suggestions are and some steps you could try that might help you.
To start with, you can use this troubleshooting guide that will bring you through steps to help with print quality issues. I am thinking that the printer may need an alignment. The test print you'll print out will show you the results if the printer itself has an issue.
Fixing Print Quality Problems for the HP Photosmart Premium All-in-One Printer Series (C309)
If the test print from the above guide shows no issues, the problem could be within the program you're printing from or a driver conflict.
You can try Uninstalling the Printer Software , restarting your computer, and then reinstalling the printer driver and software. To get the driver you need, click this link, select your operating system, driver and download: HP Photosmart Premium All-in-One Printer - C309g Drivers
It's also a good idea to try printing from another program, which will rule out if one program is solely the problem.
Feel free to let me know your findings and results!
I hope my post was informational, enjoy your Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

IPhone 4 print coupons from app Grocery ID directly to my HP Photosmart C6180 All-in-One BUT

iPhone 4 print coupons from app Grocery ID directly to my HP Photosmart C6180 All-in-One BUT the iPhone cannot find the wifi printer when I try to print from email or Safari or Contacts, etc.
Why doesn't HP list this printer in the approved list? They have the HP Officejet listed and many photosmart printers as well.
This question was solved.
View Solution.

No, its not that easy. AirPrint is a "driverless" print environment and must have hardware and firmware support in the printer to be able to print. Other apps are more of a traditional driver-based print apps and can find and print to the printer on a network without it having to support AirPrint.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Hi, I have a Photosmart C4180 All-in-One. So far it worked perfectly.
Tonight I had to print a few pages and right in the middle of it, it stopped leaving the page halfway.
Also the on/off button stays orange and there is an exclamation point underneath it.
I removed the page and turned off the power by removing the plug (pressing the on/off button didn't work).
While putting the plug back in, the power came on again... but the on/off button remains orange. Nothing works.
Does anybody recognize this problem and/or does anybody have a solution for this?
Thank you,
Dutchfox

Hi , I understand that you are having issues printing and scanning. I would be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart (D110), Photosmart Wireless (B110), and Photosmart Ink Advantage (K510) e-All-in-One Printer Series - Printing a Network Configuration Page. Check to see if you still have a valid IPv4 address. If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IPv4 address into your web browser's address bar. (Safari)Did it load the web page? If you were able to access the printer's Embedded Web Server, please try the following steps: Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

HP - Photosmart e-All-in-One Wireless Printer (CN731A)
Went through setup on Windows 7 64-bit, printed the test photo, came out great. Thought everything was good to go. Later, when trying to print a document, it wouldn't print. Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there. I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed. This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer. I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo? Any ideas would be appreciated!

Hello,
Try the below steps ..
While the printer is ON, Unplug the power cord from back of the printer.
Disconnect all the cables that are connected to the printer.
Wait for 30 seconds.
Plug in only the Power Cord. ( Printer would Power on ).
Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges or the Printer .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printable area / Hardware margins of a Photosmart 6510 all-in-one

Similar Messages

Maybe you are looking for