Printed margins are bigger than it is viewed in adobe reader

Hi all:
   I convert some html pages  to pdf with acrobat x pro, then I crop those margins to a small size, it looks fine in adobe reader , but when I print the pdf out , the margins of left and right are much bigger so that the font size is so small. I check none / fit to printable area with page scaling option, it doesn't work. Is there a solution to it?
  Page size is A4.
  thanks.
  Kurt

Thanks for the reply.
Well, I managed to print out the PDF file from my flat-mate's PC on a laser printer, so I'm guessing that the problem lies either with the Mac version of Adobe Reader 7 or the HP printer driver. As the printer copes fine with Preview, it might be Reader's fault.
But this does mean that all hope isn't lost on my project using Pages.
A few more investigations are needed I think.
Tim

Similar Messages

  • PDF file pages missing when viewed in Adobe Reader XI

    Hi All,
    I have been made aware of a recent issue when viewing scanned PDF files in Adobe Reader XI. Pages are missing when the PDF file is viewed in Adobe Reader v.11.0.x though all pages are visible when file is viewed in Adobe Reader 10.1.5?
    I can confirm I have checked Show large images option under Preferences -> Page -> Display, though this doesn't appear to have made a difference. I have been able to replicate this same issue on several other machines.
    All machines checked and tested are running Windows 7 (64-bit).
    Any help on this issue would be greatly appreciated.
    Thank you.

    Never heard of such an issue.  Can you share such a PDF with the forum?  See http://forums.adobe.com/thread/1408375

  • Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

    Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

    Hi,
    You didnt mention which version of IWS. follow these steps.
    (1)Goto Web Server Administration Server, select the server you want to manage.
    (2)Select Preference >> Perfomance Tuning.
    (3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
    (4) Apply changes and restart the server.
    *Setting the timeout to a lower value, however, may    prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before   the connection is closed is 432000 bits (2400 multiplied by 180)
    Regards
    T.Raghulan
    [email protected]

  • HP Laserjet P1005 print in Text Edit but nor in Word or Adobe Reader

    I just bought a HP LaserJet P1005 printer, it does print in all the aplications that camed with the operating system Mac OS X 10.4.10 ( Text Edit, Ical, Iweb, Sherlock, etc) but It does not print in any other aplication ( Open Office, Microsoft Office, Adobe Reader, Freehand, etc).
    I have already installed last version of the HP driver and also updated the OS to 10.4.11 but there is no difference.
    Because the printer is on guarantee I did call to HP, but they said that if the printer print in aplications lake text edit, the printer is ok, so the would not replace it.
    Anyway I do not know if other printer with the same model would work or if it would have the same problem.
    Can anybody help me?
    Thanks a lot.

    I see that the original poster has returned the printer but figured I'd post in case others are having this issue.
    Same problem here: Intel iMac, latest updates applied (Tiger), brand new printer, Office Mac 2004
    Verifying disk, repairing permissions does not solve this problem. Trashing all the Microsoft preferences and reinstalling didn't work. I have a slew of these same iMacs running Office X and they print with no problems so I removed Office 2004 and went back to X and still had the same problem.
    It's bizarre. I was able to print an Excel file but when I try to print a Word document the printer window jumps to "Jobs Stopped" a few seconds after receiving the job. Clicking "Start Jobs" results in it jumping back to "Jobs Stopped" I downloaded the driver package from HP thinking maybe it had been updated since the CD that came with the printer was pressed but no luck.
    There is another post around here in which the poster said if s/he clicks Print Preview and then clicks the Print icon there the document will print. I'll try that tomorrow. The other post has some quotes from HP support that are not very helpful.

  • I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

    I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

    Currently, Adobe Reader for Android does not provide an option to disable auto-save.
    In the Reader home screen (where your files are displayed), you can make a copy of the original PDF document, open the copy (instead of opening the original document), make changes to the copy.  Once you email the copy, you can delete it.
    For more information, please see Help > How To... > Copy, edit, delete, manage.
    Although it is not the most convenient way to accomplish the task, that's the only feasible workaround that is available in Adobe Reader for Android right now.

  • I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

    I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
    I followed the FAQ troubleshooting and that didn't help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • PDF Viewer or Adobe Reader/QuickOffice Questions - PLEASE REPLY!

    Does the D Inc ship preinstalled with the "PDF Viewer" or Adobe Reader?
    Also, can you CREATE documents with Quickoffice, or does it only view doc/xls/ppt from attachments? I'm assuming you can also drag documents from the computer to the SD Card and view them on Quickoffice as well?
    Thanks!

    The Dinc with 2.1 had a pdf viewer but it was removed from the 2.2 update. You can download the Adobe pdf reader application from the Market for free.
    I believe that the QuickOffice installed on the Dinc is for viewing files only. The full paid version of QuickOffice has more options and is available on the market.
    Yes you can drag and drop documents into the sd card and they will be viewable by the QuickOffice application.

  • The hyperlinks in my pdf all have a blue shaded box around them when viewing in adobe reader.

    The hyperlinks in my pdf all have a blue shaded box around them when viewing in adobe reader. How can I get rid of these? Why is this happening? The pdf was created from a presentation in powerpoint and uses the links for some interactivity. 

    That's a great feature request. I'd like the ability to turn off the blue boxes over hyperlinks as well.

  • Figures show up pixelated in presentation viewed with Adobe reader

    I am working on a presentation which I am making in beamer (latex). Since I am including animations and hyperlinks to sounds, I am using Adobe reader 9 for unix on Lubuntu. Everything is working fine except for one strange thing:
    - The fonts and labels on the figures I am using appear extremely pixelated in the presentation pdf (viewed with Adobe reader) even though if I open them individually, they look fine.
    - If I open the presentation pdf with evince, there is no such problem and the figures look fine. But since animations dont show in evince, I have to use Adobe reader
    Apparently this is an Adobe reader problem. I tried meddling with the settings a bit (pixels per inch, smoothen lines...) but with no success. I have no idea why this is happening, but it is quite terrible for me.

    As a follow to the above, the problem was related to a file transfer.  The PDFs in question were being transfered from a Unix platform to a Windows Server.  The transfer was defaulting to ASCII or Text and not binary.  Apparently this was never an issue with older versions of Adobe Reader.  Once the transfer was switched to binary, Reader X was able to view the files with no missing pages.  Something was being stripped from the file that Reader X just didn't like.

  • AME rendered files are bigger than in Premiere CS6

    Hi!
    I have a big project - 6 hours prepared for rendering in 4 sequences (each sequence is about 1h 30 minutes - 1h 45 minutes) I try to export them with H.264 - Blu ray default settings. Estimated file size for each sequence is about 17 - 20 GB, but when I export them into AME I got files 52 - 55 GB ! When I export same sequences one by one directly from Premiere CS6 I got 17 - 20 GB files. What's wrong with AME? Same input, same settings but files are more than duble sized?!
    Thx!

    Here are the screenshots of all export settings related to one of these projects. As you can see estimated file size is 16321 MB and when I click on "export", rendering is about 15% faster and file is about 17 GB. But when I click on "queue" rendering is slower and files are about 52 GB

  • A pdf document created in cs5 cannot be printed in duplex on a pc without cs5 or adobe reader pro

    Hi!
    there is a "normal" cs5 created pdf document.
    the installed cs5  pc -> i can print in duplex on every printer, without cs5 installed duplex printing not possible.
    I am searching for a solution to print the pdf document in duplex mode on every printer, but only with the latest freeware version adobe xi 11.0.3.
    (If i install adobe cs4 on a pc it is possible to print the document in duplex mode on a hp3525 printer, but duplex is not possible on a ricoh printer for example mpc5502.)
    I cant upload the file, because its bigger than 2 mb. (5mb)
    Is there anybody out there for help.
    If you need the file, i´ll send 2 u.
    thx

    Yep, it definitely is a complicated workflow... But I'm not really sure of any other way to get from the 34" wide pattern to the home-sewing version which is split into pages and has alignment marks and whatnot. I'm very much an amateur that has figured it out as I went
    I went through the page in the photo pretty thoroughly with the layer panel and I couldn't find any mystery lines... But I did find something interesting; when I click on any of the pattern lines, it shows the whole line of the pattern piece, which extends well past the edge of the artboard. So when I'm printing the poster-sized PDF to 7.5x10 pages, it's keeping all the anchor points of a line even if only a small piece of that is on the actual page.
    Does this help? I've included the page in the photo as well http://www.putlocker.com/file/DADB4759DBB860D8
    Thanks again to everyone!
    Also, should I be keeping all the files I'm editing as .ai files and then only exporting to PDF for the very final product? I was doing that at first, but then using .pdf for the whole process didn't seem to make any difference.

  • Photoshop to pdf. Then viewing in adobe reader is blurry. Why does it come view blurry?

    Hey im trying to convert a photoshop file to pdf. I can convert it, but when i view it in adobe reader it looks blurry. The photoshop file looks clean but the convertion just looks burry. Ugh stuck. Thanks

    sounds like the pdf conversion settings are for web not high quality 300 ppi image
    try again, check all settings before /convert/save

  • PDF Fonts change when viewed in Adobe Reader

    I'm producing a PDF which will be viewed online. It's being creating in Pages 09 and I export it to PDF.
    In Preview the PDF is fine - no problems. But when I view it in Adobe Reader the fonts have changed. I've tried all the fonts listed in the Font collection "PDF" and most recommended for Web.
    Just to give you a couple of examples Times becomes blurry in Reader, while Helvetica looks more like Verdana.
    I didn't have this problem prior to upgrading to Snow Leopard. I'd really appreciate if anyone could help with this. Thanks.

    Peter, my apologies for not getting back to you sooner than this, I've been away from my Mac since I posted this.
    Thank you for your very kind offer to look at the files for me. In between time a friend has been over and apparently altered some settings on my iMac and the problem seems to have been resolved. (I hope!)
    Thanks again - I daresay I'll be back with more questions before long...

  • PDF portfolio view in Adobe reader

    Hi,
    I recently created a PDF portfolio for a co-worker using Acrobat 9.0 Pro. I used the Grid with File Preview layout and added a header that appears right above the grid. Everything works well except that when my co-worker opens the PDF portfolio in Adobe Reader,  I think it's 9.0, the preview pane takes up most of the screen so that the grid and header are barely visible. Of course, all my co-worker has to do is move the divider over to the right so that the divider is around the middle of the screen, then he can clearly see the complete grid along with the header.
    Is there anyway to make my PDF portfolio open up in Reader so that the dividing line is right in the middle between the grid and preview pane so that the grid and header are clearly visible without having to move the divider? Also, I encountered the same problem when I tried to use a welcome window. In Acrobat 9.0, the welcome window is dead center over the grid and the preview pane is invisible unless I click to proceed. However, when I open the PDF portfolio in Reader, the welcome window only appears in the grid section and again, the gird section is mostly covered up by the preview pane.
    Any help would be greatly appreciated.
    Ed

    Operating system?  Reader version?  Local or online files?

  • How to set default view in Adobe Reader 9?

    I am trying to figure out how to set adobe reader so that when you open a document you automatically get the page view on the right side come up and the document in full mode.  I have researched registry edits and also the customize wizard with no luck.  Does Adobe Reader have the capability to set these as defaults on any document?  I have the application setup to remember what I did so if I open the same document it will show pages and be in full mode; however, if I open a new document, I have to select the icon on the left to display pages and then set to full mode.  Thanks Joe

    Does Adobe Reader have the capability to set these as defaults on any document?
    Adobe Acrobat can do this, not Adobe Reader.

Maybe you are looking for

  • Different behaviour in SQL*Plus and PL/SQL

    Does anyone know why the following SQL works from the command line in SQL*Plus but results in a syntax error when included within a cursor in a PL/SQL procedure? SELECT (SELECT 'dummy' FROM dual) FROM dual; null

  • Mac-mini 2009 airdrop not compatible in Lion??

    Airdrop doesn´t work in Lion with Mac mini 2009 model. Anyone thiks ther will be a firmware update or anything similar to fix this problem??

  • Computers don't recognize iPod is connected.

    About a month ago I was pushed an iTunes update. iTunes has not worked since. When I connect to my other computer, iTunes asked if I want to erase all content. Whow the heck do I reset, reboot or figure out how to have my computer recognize my 4th ge

  • Automating payment blocks in F-43

    Hi experts Can the payment block available in F-43 be set to automatically kick-in once invoice entry has been completed (rather than rely upon user to set the block)?

  • Trouble with Aperture 3.2.3 recognizing Vault on external HD?

    Having problem backing up to vault on external HD. ApertureVault window indicates it is disconnected, but it is not, and when I try to update path I get an error message saying "Not a valid vault file." The vault was originally on a different externa