Printed photos cut out part of the image!

Just got my Mac 3 months ago........I transferred photos from Nikon Transfer software to iphoto. When I finished editing photos in iphoto I sent them to a desktop folder then burned them onto a disc. When my customer tried to print them it cut some of the heads off of the subjects. I shot them in a very high resolution so that my client could get the best photo quality for extra large prints, if she desired.
Average size of photo is 3069 x 2337. Jpeg format
Please help, as I am new to mac and want to re-burn the photos so that they may be printed smaller without loss of parts of the actual image (like peoples heads).
Thanks SO much!!

Crop them to the ratio that your friend will be printing - 4:6, 5:7, 8:10 - what ever
Digital photos form point and shoot cameras typically are in a 4:3 ratio and from a DSLR in a 3:2 ratio - they are probably printing is a different ratio
LN

Similar Messages

  • How to cut out part of an image and replace with another?

    ok, i'm a newbie to image editing, and i want to cut out a persons face in a picture and put in another face on the picture. i'm sure this is pretty simple, i just have no idea where to start. can someone point me in the right direction? thanks!

    Aperture is not a pixel editor, which is what you need. Photoshop is the app used for this, but it's cost is several times that of AP! As suggested in the second post, look into Photoshop Elements, a slimmed-down and much cheaper version of Photoshop. [I don't use Elements, so if someone knows that it can't do area copies from one pic to another, please join the conversation!]
    And get a good book on Photoshop or Elements, there's a huge learning curve involved. I'd suggest going to a book shop, pulling a few such books off the shelf and check their index for editing techniques. Sometimes you'll find one book that gives you the exact step-by-step instructions for doing what you want. Then there'll be others that don't get into the topic or do a poor job.

  • I am trying to crop a portrait photo into 6x4 portrait ready for printing.  Iphoto only crops it landscape and therefore cuts out most of the photo.  Is there any way of resolving this?

    I am trying to crop a portrait photo into 6x4 portrait ready for printing.  I am using Iphoto on a Macbook Pro.  Everytime I try and crop the photo, it crops in Landscape which cuts out most of the photo.  Is there any way of resolving this?  I am new to Macs as I am currently switching from MS.  It is very easy to do this in MS photo editor so I can't believe it can't be easily done in Iphoto!

    These are the two steps that Larry describes:
    #1
    #2

  • How do I adjust iMovie to not cut off part of the photo image as it transitions between photos?

    How do I adjust iMovie to not cut off part of the photo as it transitions between photos?

    Have you transferred photos from your computer to your iPhone which is selected under the Photos tab for your iPhone sync preferences with iTunes?
    If so, you can place this video in the folder of photos on your computer that is selected to be transferred to your iPhone via the iTunes sync process. Under the Photos tab for your iPhone sync preferences with iTunes, select Include Videos.

  • Filing in an image to fit a photo cut out

    upgraded to keynote version 4. Now in placing an image in a photo cut out I can no longer fill in the area surrounding the image. In Inspector: graphics 'Fill' is not activated like it did previously. I cannot activate the pop up menu of Fill in anyway that I have found. For placement of the image, I use copy and paste then move the image to the photo cut out. I press graphics and can shadow but no fill.
    thanks idc&tm

    If you're working with one of Apple's themes, they do NOT use cutouts any longer, they use placeholders. Can you be a bit more clear as to what you're trying to do, and what theme you're using?

  • When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    Crop to the print size before pringing
    LN

  • After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

    After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

    thankyou. THANK you.
    thankyouthankyouthankyou!
    sorry about no screenie but the first option worked (at least so far!)
    THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

  • My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

    My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
    The below items appeared when I opened Photoshop CS 5:
    “Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
    (I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

    For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
    If so, check Clipped and see if that makes a difference.
    (Window>Clone Source)
    As to the video card problem:
    Which version of windows are you using?
    What is the make and model of your graphics card?
    Do you know which update windows installed?

  • I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

    I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

    eehenry wrote:
    It is a problem with a secondary provider, "mag cloud" .
    Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
    It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

  • How do I get original shape of photos. Mine have all changed to square , losing part of the image. Infuriating!

    My photo library has changed the shape of all my images to square meaning I have lost part of the image. How do I revert all the images to their original shape? Very annoying!

    All the images are now square with rounded corners, very "arty" but substantil parts of the image is lost as all my photos are A shape ie they are normal photo negative shape. Ther seems to be no tool on the latest iPhoto to make the change back to originals. I have nearly 1000 photos  so changing them back one by on is not practical

  • As soon as I open a photo with Preview part of the photo turns black

    As soon as I open a photo with Preview, part of the photo turns black.  Just started doing this.

    Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
    First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
    Can you?
    You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
    What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
    Verizon although with the best coverage is also the highest priced.
    Good Luck

  • After Preflighting a PDF, using Convert to CMYK, Flatten Transparency and Prepress Profile Convert to CMYK only the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image.

    I am using a 27" iMac 3.2 GHz Intel Core 5, 8 GB Memory, running Yosemite 10.10.1. 
    The version of Acrobat that I am using is: Acrobat XI Version 11.0.10
    After Preflighting a PDF, using Convert to CMYK, Flatten Transparency (high resolution) and Prepress Profile "Convert to CMYK only" the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image which is 300 dpi.
    It is like the image isn't really 300 dpi but has been artificially boosted to that to avoid being tagged by Preflighting, but when Preflighting the file it knows the original resolution.
    I have screen grabs which illustrate the problem perfectly but do not know how to post them, if indeed they can be.
    Any help or comments gratefully received.

    Without the files and possibly screen prints, it is virtually impossible to assist you.
              - Dov

  • Bizarre bug in Camera Raw 7.3 or Adobe Algorithms??? Grayed out areas of the image

    When converting raw files from Nikon D600 using CR 7.3 parts of the image appear grey and save that way. Converting to TIFF using Adobe DNG Converter didn't help but viewing and saving to TIFF in Preview showed none of the artifacts. Very bizarre and I am really looking forward to an explanation and hopefully a fix! Tried it on two machines now - same problem!!

    The example photo had Defringe values were set too extreme for the picture content.   Here is a lynda.com video that shows how to back things off based on what you see on screen:
    http://www.youtube.com/watch?v=cMfoLcfn8W8
    Images should initially be opening with zero Amount values for Defringing.  This is how my defaults are:
      If not, then reset your camera raw defaults to the factory defaults:
    After doing this, then if you really want something different than the factory defaults, open a new image, set those values and use the Save New Camera Raw Defaults item just above.

  • I need to replace a color on my image with a specific color from another part of the image.  How?!

    I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image.  So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is.  I need to use a specific color so this does not help me.  Does anyone know how to complete the task I am referring to?
    Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything.  So it's pretty old school...
    Any help/feedback is greatly appreciated!  Thank you.

    Hi brookehelene,
    You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
    I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
    (click on the screenshots below for larger views)
    1. Select>Color Range
       (i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
       (there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
    2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
       (in the screenshot below the white areas are selected and black areas are not)
       (your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
    3. After you press the okay in the color range dialog you'll see the selection (marching ants)
       At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
       to reveal a list and choose Solid Color.
       Then use the eyedropper to sample a color from your image and press ok.
       Change the Blend mode for the color fill layer to Color (top of the layers palette)
    4. As you can see a lot has been selected besides the flower.
        To refine the areas of color, paint on the layer mask with the paintbrush tool.
        Use white to add the color or black to subtract the color
        You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
        and press the X key to switch between the two when painting on the layer mask.
    Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
    To change the color you can double click on the color fill icon in the layers panel.
    You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do.

  • InDesign only showing part of the image

    I'm doing a job for a client in InDesign CS5. I have not worked in CS5 before, so don't know if this is a bug or if I'm doing something wrong.
    It seems to happen randomly and I have checked the preferences and tried using different settings for the Display Performance. I've even tried viewing the job with Overprint Preview switched on.
    When placing images only a part of the image shows. When I output to PDF or Print the file then the entire image shows. This makes it very hard to do layouts, especially in cases where I need to crop an image.
    In InDesign it looks like this:
    When I output to PDF (this is a low res output, just to demonstrate my point) the entire image shows:
    In InDesign it looks like this:
    When I output to PDF:
    The machine I'm ding this job on is an iMac, 2.66GHz Intel Core 2 Duo with 4GB 800MHZ DDR2 SDRAM. It is running Mac OSX 10.6.4. And InDesign is on version 7.0.2.

    mafeiteng wrote:
    I'm doing a job for a client in InDesign CS5. I have not worked in CS5 before, so don't know if this is a bug or if I'm doing something wrong.
    It seems to happen randomly and I have checked the preferences and tried using different settings for the Display Performance. I've even tried viewing the job with Overprint Preview switched on.
    When placing images only a part of the image shows. When I output to PDF or Print the file then the entire image shows. This makes it very hard to do layouts, especially in cases where I need to crop an image.
    In InDesign it looks like this:
    When I output to PDF (this is a low res output, just to demonstrate my point) the entire image shows:
    In InDesign it looks like this:
    When I output to PDF:
    The machine I'm ding this job on is an iMac, 2.66GHz Intel Core 2 Duo with 4GB 800MHZ DDR2 SDRAM. It is running Mac OSX 10.6.4. And InDesign is on version 7.0.2.
    If I understand things correctly, you're placing client-supplied images into a new InDesign file that you're creating, so the only part of the workflow that you haven't created is the graphics. This logically leaves the container file innocent.
    The question becomes "what's up with either the hardware or the graphics?" If the problem persists with the same graphic files and a new container file on a different user account on the same computer, it's possible that hardware is the villain. If it doesn't persist on a different computer, it's likely the hardware. If it does persist on a different computer, in a new container file, it's likely something in the graphics files.
    It's not clear if the graphics card in your iMac is one of the models whose video RAM is "dedicated," that is, it doesn't share video RAM with the main RAM, or if it does share VRAM. If it shares RAM, it's possible that 4GB isn't sufficient to display all the open applications and their demands. If this is the cause, it's a hardware issue (insufficient RAM.)
    Because the graphics print and convert to PDF without the problem, it would seem that the graphics are innocent, but perhaps something in the processing of these outputs causes the problem to disappear. For example, perhaps there's some flattening involved. Perhaps there's a clipping path or channel mask of some kind involved that affects the InDesign display? (Just fishing.)
    Have you tried opening the graphics in their creating application and saving them to new names? Any difference in the behavior when those graphics are freshly-placed in InDesign, or when their links are updated?
    Have you tried placing PDFs of the graphics? If they appear properly, can you crop them to achieve your requirements and hope the problem goes away after the deadline passes<G>?
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

Maybe you are looking for

  • How do I share songs with other family members?

    I would like to know how I share songs and movies with other family members who have different accounts.

  • Getting Error while creating Calculation view.

    Hi Expert, I was trying to create one simple calculation view using SQL script but getting below error. /********* Begin Procedure Script ************/ BEGIN create type var_out1 as table (ebeln varchar(10),menge decimal);         var_out  = CE_COLUM

  • How to merge two pages of a PDF into one

    How do I merge two pages (within the same PDF file) into one page?  For example, I have a scanned 3x5 card; the front of the card is on page one and the back of the card is on page two.  How do I merge them so the front and back of the card is on the

  • Managing vty ACLs with Prime Infrastructure?

    I have a number of devices -- various models of Nexus, (2k - 7k), 6500s and some 1U stackables. I'm trying to come up with a good way to leverage PI (2.1) to apply a vty ACL to the switches. There does not appear to be a template for this. The proble

  • Idocs in inbound queue

    Hi, We have a very critical issue wherein many a times in actual production system idocs are going into status 75 and hence into Inbound Queue. So user currently has to go transaction WEINBQUEUE and restart queue details. Just to give more technical