Printed pictures do not look like screen

I am struggling getting printed pictures to look like the screen version. I have a Canon i960 attached to my computer. I have tried the different ColorSnyc profies, as well as "Printer" control.
I am wondering if I should try one of the other Aperture profiles - specifically a CMYK profile. And which one should I try?

If your Monitor is relatively accurate, make sure in Aperture the monitor is set correctly by selecting the correct printer profile from "view" "proofing profile". Foe example I have a canon IP5200 printer so I select IP5200/5200R PR3 from the proofing profile options. Then when you go to print make sure you have selected the correct print profile for your printer (found in "print image""color profile") . Again since I have the Canon printer I selected "Canon IP5200/5200R PR3". Each printer comes with their own set of print profiles.
PS PR3 is canons code for type of paper and quality of print.

Similar Messages

How do i change my screen so all pictures do not look like ghosts

my kids did somethimg to my imac. And i do not know how to change the screen so every picture does not look like a ghost. PLEASE HELP!!! thank you

SysPrefs>Universal Access>Display. Check black on white.

PSE editor pictures do not look like the origianls

The pictures on my PSE editor do not look like the orginals and most have a redish cast. I am having a hard time editing as I am not sure what the actual colors are that I am adjusting.
It is near imposible to work on people, i.e. complexion colors, etc.
Is there a setting I am missing in the basic editor?
Any help will be appreciated.

Hello Donburl,
The red color cast you are seeing is created by your color management settings, as suggested by Bshowell. However, the settings in Photoshop Elements under Edit>Color Settings are only part of the story. There are also system level color management settings, the main one we would be concerned with would be the monitor profile. This profile is a description of the color output of your device and is used to compensate for a known difference between the input and the output. However, you are not seeing a similar red cast in other applications because they are not color managed (meaning, they ignore the color management settings of your system). Most likely the problem is you are using the incorrect color profile for your monitor and it is shifting your colors.
A monitor profile is not necessary unless you a very concerned with absolute accuracy in your prints because it is the only way you can ensure the colors on your screen are accurate. But that requires a hardware calibration device.
You should probably just change or remove your current monitor profile. How to do so depends on your OS:
Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/icm_change_ color_profile_monitor.mspx?mfr=true
Win Vista/7: http://windows.microsoft.com/en-US/windows7/Change-color-management-settings
Mac: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2141.html

My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Help!

My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?

That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.

Does not look like the picture on your site. i have xp professional

i downloaded ff v.4, but it does not look like the picture on your website. lots of missing components/tabs?
i use windows xp professional.

The orange Firefox menu button is hidden by default on Windows XP.<br />
You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You can place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top

Why does my exported PDF not look like the original?

When I export a PDF to excel, the excel document doesn't look like the original. Any idea why or how to make it an exact duplicate?

No discussion mi adob france
Acrobat Pro, PDF Pack, Export PDF & More | A...
Acrobat
Adobe Document Solutions make it simple to help you get more done every day, and lets you easily create, edit, send, an...
Envoyé depuis Molto pour iPad
Message transféré:
De: Allamelle
Envoyé: jeudi, février 12, 2015 10:53 AM
À: [email protected]
Objet: Re: Why does my exported PDF not look like the original?
Stop Mdr
Envoyé depuis Molto pour iPad
De: Test Screen Name
Envoyé: jeudi, février 12, 2015 10:31 AM
À: René Allamelle
Objet: Why does my exported PDF not look like the original?
Why does my exported PDF not look like the original?
created by Test Screen Name in Adobe Acrobat.com Services - View the full discussion
"Vaguely like" is the best we can hope for and a minor miracle in itself. PDF was never meant to be converted.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7187391#7187391 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7187391#7187391
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Acrobat.com Services by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Webgui theme not rendering toolbar, does not look like SAPgui for Win

Hello all,
I just installed the ITS 6.20 Patch 20 and when I started the webgui service, the theme that was genereatd does not look like the SAPgui for Windows at all.
All I've got is a gray and blue color theme. The top row is the "SAP Easy Access" header and on the next row are just simple square buttons (Menu, Tools, User Menu, SAP Menu, etc.).
What do I have to do to enable the "richer" look-and-feel like the SAPgui for Windows 6.20? I'm looking to get the toolbar with the paging icons, disk icon, goback, etc.
Thanks,
Mike

Oliver,
You have to disable the Enjoy SAP option.
1. Log in to the Admin service;
2. Open the Configuration | General settings for the ITS instance;
3. Remove the checkmark for the "Enjoy Design" option.
4. Save and restart.
Does this help?
Mike

IPhone screen turned white- looks like screen damage but no damage has been done

I turned my phone off because my Whatsapp was being weird. And when I went to turn my phone back on my screen was white/grey with a couple of faded vertical lines. The corners of the screen look darker and it looks like screen damage. The phone is still on just the screen isnt working, I have tried restarting but a number of times but this hasnt worked. Had loads of problems with my iPhone, anyone had anything similar happen?

Give it a couple of gentle "spanks" across the back of it. If this doesn't solve it, back up and restore via iTunes. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file or maybe it's one of your apps causing problems. If it continues, take it to an Apple Store for evaluation of a possible hardware problem.

My Ref. HD does not look like my Aperture Library

Hi,
I don't neccessarily have a problem, but I do notice that my referenced library on an ext. HD does not look like my Aperture library on my mbp. I notice that there are alot of separate images not in albums or projects or folders. Is there a way or need to reorganize the ref. images into a similar setup as my library. Any thoughts are welcome as I'm a bit of a neat freak, esp. with photos etc.
Thank you.
John

OK we're talking past each other here and not getting much accomplished.
The top screenshot from this post Re: My Ref. HD does not look like my Aperture Library is not from within Aperture. How did you take that screenshot? Aperture does not display dates like that AFAIK, that sure looks like a Finder window.
I believe the best thing you can do right now is to read the User Manual, especially the part about the parts of the Aperture library and Kirby's very good user tip. It should clear up your terminology and make things clearer for you.
good luck
regards
To better explain my point. This is what a screenshot of an Aperture Library would look like from within Aperture
This is a screnhsot of a Finder window
Message was edited by: Frank Caggiano - added screenshots

"This does not look like a tar archive"

I've seen other posts but everybody's fix seems to not work for me. Here is my error:
:: Starting full aur upgrade...
Aur Targets (3): setuptools python2-iso8601 gnome-shell-google-calendar-git
Proceed with installation? [Y/n]
tar: This does not look like a tar archive
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error is not recoverable: exiting now
/usr/bin/packer: line 271: cd: setuptools: No such file or directory
No PKGBUILD found in directory.
No matter what, I can't seem to get past this.

It looks like packer is trying to download the PKGBUILD for setuptools from the AUR, but it doesn't exist. However, setuptools is provided by python2-distribute in extra (or python2-setuptools in the AUR). I think you should remove the current setuptools that you have, install python2-distribute (or python2-setuptools), then try to update again. I think that should work.
EDIT: typo
Last edited by jomasti (2011-12-02 19:27:19)

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

cor-el
Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
bossman344

I want to print an 8 x 10, but the photo does not look like the print preview - it truncates part of the picture

I am using an HP PSC 2355 printer - and have not had trouble printing before. The 8 x 10 photo does not print like the print preview does - everything elarges when the actual print completes, which truncates all details that need to be printed. Is ther a setting that I should be choosing?

There is no O or L in my Serial Number, and it starts with one single D, then a set of 3 numbers, 3 letters, 4 times, then 3 letters closing it down. When I check my Final Cut's serial number in the help section of the software, I get the same number. Yet, when I enter it in the site, it says, I have an invalid serial number. So I will call Apple Care. I hope I will be able to talk to a representative in an hour or so. It always takes so long that I grow beard while I wait.

Why is it that I downloaded Firefox 4.0 but I do not have the orange firefox box in the upper left hand corner of screen. My screen still looks like the old verison of firefox. My screen does not look like the one in the video. looks nothing like the one

My Firefox 4.0 does not look anything like the videos you show about the features of the new Firefox. My screen looks totally different than yours. It does not have the orange box in the upper left hand corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with Ask a Question a vertical line Firefox Help - Mozilla Firefox.
Under this line I have File, Edit, View, History, Bookmarks, Tools, and Help. Below this line is a tab with Ask a Question Firefox Help and a +. My husbands screen looks identical to the orange Firefox Box in the upper left of screen. I would like my screen to look identical to the ones shown in your videos. I only have one version of Firefox 4.0 my husband does have the Firefox 4.0 plus the Beta version. How do I add the Beta version? I have Windows Vista running systems. Please help. Thank you

You're welcome

HOW DO I CHANGE THE SCREEN SETTING SO IT DOES NOT LOOK LIKE A PHOTO NEGATIVE

My phone screen and all the icons/photos etc look like a 'photo negative' how do I undo this and return the screen to the normal settings - thank you

Use Settings > General > Accessibility > White on black and turn this OFF.

My Firefox screen at the top does not look like what you show at your help site, so I can't customize or learn how to do things

I am running Windows 7 Professional and am not adept at using the Windows platform. Firefox on my computer does not look the way it is shown at specific "Help" topic pages, so I can't get the help needed. Three examples: 1. How to click on a link so it opens in a new tab; 2. How to customize the options; 3. How to get rid of the "Ask" web site window.

On Windows, you can switch between a classic menu bar and a compact menu opened with an orange button with the word Firefox.
You can switch between these using one of these methods:
* right-click a blank area of the tab bar and turn Menu Bar on or off
* View menu > Toolbars > Menu Bar
* orange Firefox button > Options triangle > Menu Bar
Does that help?
To get to the tab preferences, you can do this:
orange Firefox button (or Tools menu) > Options > Tabs
To remove the Ask toolbar, you can go here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
You might still have to do a little cleanup after removing an extension, if it changed your home page, new tab page, search provider, etc. Please describe any remaining problems in more detail.
Hope this helps.

Printed pictures do not look like screen

Similar Messages

Maybe you are looking for