Printed text is to small

How can I make the font / text size bigger? When I print a web page it's so small I can hardly read it. I have a HP Deskjet F2210 all-in-one printer.
Thank you

Wie kann ich die Schriftgröße mit dem Betriebssystem Windowos 7 Premium (64 Bit) vergrößern? Ich benutze den HP Deskjet D2460.
Vielen Dank.

Similar Messages

New printer prints texts in very small font

This is an HP Photosmart c4650. I have correctly installed (and at the suggestion of an HP tech, uninstalled and reinstalled) the software that came with the printer. The scan and copy functions are fine. And the print quality is also good. The issue is that everything that prints out is in a super small font (maybe 7). This is true whether I am trying to print from a word, notepad, or web document. HP has been unable to resolve this. Any help would be appreciated.

Can you try the steps in the document and see if it helps:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01624889&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Thanks
Naveen K
HP Support Engineering Center
Click on yellow KUDOS button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

Size of text is too small for pdf when printed

When I finished filling in the pdf - the text is too small when I printed out the form.

How did you fill that form: using Adobe Reader?
When printing, did you check the Page Sizing & Handling options on the Print panel?

Printed Text is Small with Mail.app in Lion

Has anyone been able to adjust the font size of the PRINT in Mail while using Lion? I swear I feel stupid, but I can't seem to adjust this all.
I have to print out an email and the text is soooo small. It's like 3pt. Adjusting the message view font in prefs doesn't change a thing, nor does changing the print options like "Scale to Fit", "Rewrap Message to Fit", "Keep the Same Apparent Font Size", etc.
I have the conversation view selected, but I opened a single email as well, and it ALWAYS prints like 3pt making the text unreadable.
I finally had to forward the email to gmail and print from gmail. Sad.
Any ideas on how to adjust the PRINT font size only?

Yes, I tried this as well.
If I increase the scale to let's say 400%, it does increase the font size, but makes the text no longer appdear on one page. It will change the flow of the text so that half a sentence on the right is cut off, and the remaining text is on the next page.
In other words, it doesn't work.
Just in case this helps, I'm printing to a HP 4240n, but I don't think that would be it.
Even saving to a PDF in the print dialog causes the same issue.
Does anyone print emails from Mail.app in Lion? Am I the only one?

Print text file with labview 2011 and windows 7

I am having some strange problem, hope someone out there knows the solution.
We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below.
If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages.
For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
Welcome to any suggestions!
Thanks
Attachments:
print vi.gif ‏9 KB
labview print bug.png ‏26 KB
SerialLabel.txt ‏1 KB

DGU wrote:
where to check RAW or TEXT? the print report vi only asks for file name and printer name.
When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
Famous last words go something like this: "...never had to do that before." Maybe you have to do that now. It's worth at least comparing the defaults settings for bothe generic drivers. It could save you a lot of headache if you notice something different.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How can I change a PDF document to have an enlarged text area and smaller margins?

I've just been reading a long discussion initiated by a guy who wanted to recompose a PDF file to print in fewer pages. I'm not asking about that. I'm aware that Acrobat Pro 9 will not recompose the pages of a pdf for you; as someone said, it's not a word processing program. I want to copy a PDF to a new file with an enlarged text area and smaller margins, so I can read it more easily. My eyesight isn't so great.
I'm trying to print a decision of the US Supreme Court, for my study. The problem is that these PDF files of such decisions are composed in 10-point type with generous margins, in folio-size pages smaller than 8 1/2 x 11". When you open PDF files of these decisions, you get extremely wide margins and relatively small type. Essentially, I'd like to re-rasterize the document so it prints on my 8 1/2 x 11" paper in a larger apparent type size, but in the same high resolution as the original. By the way, the decision I'm working on is almost 200 pages long, so I don't want to do this, obviously, in a page by page manner.
I guess I could do this in Photoshop, by blowing pages up and cropping them. Photoshop does a good job of eliminating the jaggies when you do this. But it would seem better to re-rasterize the pages from the PDF source file. So would any reader be kind enough to explain this process to me? (I'm fairly savvy in Photoshop, Illustrator, and computer printer concepts, but a complete newb in Acrobat.)

If you just want this for printing, one thing you can easily do is crop all of the pages to remove the margins. For example, you can rop 2" off the left and right sides, and 1.5" off the top and bottom. Then print using a Page Scaling of "Fit to Printable Area".
To crop in Acrobat 9, select: Document > Crop Pages
be sure to select All for the Page Range.

How to Print text in two main windows

For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times.
but program prints only one window. why is it so? how can i print text on two windows.
do 2 times.
COUNT = COUNT + 1.
loop at itab WHERE DEPTT LT 200.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'TEST'
        FUNCTION = 'SET'
        TYPE     = 'BODY'
      WINDOW   = 'MAIN'
      EXCEPTIONS
       ELEMENT   = 1
       FUNCTION = 2
       TYPE      = 3
       UNOPENED = 4
       UNSTARTED = 5
       WINDOW    = 6
       OTHERS    = 7.
endloop.
enddo.
Please guide.

Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
3) Now Add another window MAIN and down at the bottom put in '02'.
Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc.
Good Luck!
Tim Stadler
Menasha Corporation

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

How do I change the printed text size.

How do I change the printed text size? This happens on everything I print out. The text is so small I can just about read it. I use a magnifying glass. Please help. Thank you.

This appears to help. I have been dealing with system preferences which only offers limited help. I recently upgraded from an older macbook, but now my macbook air text is so microscopic that it doesn't seem right.

How to print text vertically in smart forms

hi,
Can any one tell how to print text vertically in smartforms
ADVANCE THANKS
GUHAPRIYAN

HI,
Chk out this thread.Maybe it proves helpful.
Re: vertical writing in smartforms
Regards,
Gayathri

Photoshop CC icons and text are too small: how to adjust so they're readable? [was: Joanne]

I have just downloaded Creative Cloud on a new computer. The new photoshop icons and text are too small for me to see or work with. I cannot seem to adjust this so its "useable"

Hey Bob,
Ive put feature requests for this in before and I know many others have as well. Is there any way to see if Adobe is actually working on this? I dont really consider this a feature request, it should be standard with the software. A feature request would be something like creative cloud libraries, not the ability to make font sizes and icons bigger.

Print Text File in NW 3.12?

I have to admit some ignorance regarding NetWare printing, so my
apologies in advance...
I work for a document management company, and am trying to find a
solution for a customer running a fairly archaic, DOS 6.22-based
application that utilizes a NetWare 3.12 server for file and print
services. My need is to retrieve print output from their application,
in the form of a text file, and then reprocess it for automated faxing
through a fax server device.
My problem is this: their application seems to print directly to a
printer by defining what it calls a "network port" (which seems to map
to a spooler, 0 through 5) or LPT1, and by referencing a printer
definition. As far as I can tell, the files that are deposited in the
print queue are byte streams, i.e., they're not human-readable (they
have extra characters that I'm assuming are control characters). They
therefore aren't usable by my print distribution software.
I've tried using CAPTURE to send to a text file, but the application
seems to conflict with the command. If I set CAPTURE, then start the
application and send a job to LPT1, the application returns an error
that the printer is unavailable. Upon exiting the application the port
is no longer being captured (although I've tried all of the options I
can think of to keep it so). Oddly enough, the application does
successfully print a text file to LPT2 (for a barcode printer), which
is CAPTUREd via a command in the system autoexec.bat. This is done a
different part of the application.
If anyone can help me figure out a way to generate a text file in this
environment, or to work with the print file that's currently being sent
to the queue (e.g, can it be translated somehow to a simple text file?),
that would be much, much appreciated. This customer is in a tight spot,
with an unsupported application that they can't presently afford to
upgrade. My solution would save them enough money over time to replace
the system.
Again, thanks in advance for any help!
wynand32

If the Dos app has no print drivers included, then indeed it is relying
on NW and PRINTDEF/PRINTCON to do the formatting stuff. That must have
already been set up for it to be successfully printing now, it's just a
matter of adding a definition that doesn't do anything to the print text.
>In fact, given my ignorance of the NetWare environment, I'm not sure
how the term "driver" even applies, unless it would refer to the
printer definition.
I was referring to a driver within the Dos app, nothing to do with
NetWare. For instance Word Perfect for Dos came with Dos drivers for all
sorts of printers, one of which was a generic text driver.
>I wonder: is there a setting in PRINTDEF that could be changed for one
of the printer configs that would influence the output? Or, would
PRINTCON apply in this environment?
Not supplied, AFAICS, but either one of the simpler print drivers
supplied such as Diablo will do, or you'd need to set one up. Hopefully
http://www.novell.com/documentation/...a/fm19724.html
will help you enough as it's been too long since I did it to remember
the details.
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc.

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

How can i print text messages from my htc amaze to my deskjet 3050A

how can i print text messages from my htc amaze to my hp deskjet 3050A

Hi,
I believe the phone uses Android OS, v2.3.4 (Gingerbread) therefore you can use one of these applications:
http://www.printeron.com/apps/androidprinting.html
https://market.android.com/details?id=com.pauloslf.cloudprint&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Printed text is to small

Similar Messages

Maybe you are looking for