Printer 6122 driver for windows 7 x64

I have printer hp Desk jet 6122 i want compatible driver without using windows update , because the hardware firewall close windows update since it uses wide range of ports.
Best Regards

Mohamedeid
Let me Google that for you
Wanikiya and Dyami--Team Zigzag

Similar Messages

Creative webcam driver for windows x64

Hi! i'm looking for a driver for windows xp x64 for my creative webcam go but i dont find it. Is there a driver from creative or a generic driver?
Thanks

fredn,
You can find a compatibility list in our knowledgebase by searching for article SID7824. Unfortunately, it appears that the WebCam Vista and NX have no development planned for x64.
Daniel

HP Lasejet 1160 Printer driver for windows 8.1 64 bit

Need HP Lasejet 1160 Printer driver for windows 8.1 64 bit

Hi,
The drivers are available via Windows Update, follow these steps to install the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=41061...
Be aware that the printer only support USB connectivity on Windows 8.1, network connection is not supported for the operating system if you use an HP print server:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=41061...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

L2440X Driver for Windows 7 x64

Hello all together, how do I get a driver for Windows 7 x64 ago for this monitor?
Windows detects the monitor is only as PNP monitor.
The monitor is connected to an XFX 5850 by DP.
I had already downloaded the driver from Lenovo, but this can not be installed. there is only the message --
It was found driver software for the device but to install an error has occurred.
Lenovo L2440xwC (DP), the system can not find the file specified.
But this is me in the system folder.
Where is the problem?
Greetings from Frankfurt, Germany

I wonder if the problem here is that HDCP (built-in DRM) is not supported though the Display Port interface (or the VGA interface). It is only supported through the DVI interface. Win7 x64 considers your use of your computer to be the business of Hollywood and Redmond, and if you want to enjoy HD content, then Win7 will *protect* that content at all costs, including disabling your computer hardware. This means refusing to allow unsigned drivers or 32-bit drivers into 64-bit systems that are under DRM-lockdown.
But this is conjecture on my part. Maybe the problem lies elsewhere. Or maybe Lenovo has no responsibility to past customers, and so leaves them hanging out there with hardware incompatibilities that will NEVER be fixed (because the L2440x has been discontinued, and Lenovo isn't going to sink another single penny into something--like updating the device driver--that can no longer make them any money).

How can I download a Generic Post Script printer Driver for Windows 7 .

How can I download a Generic Post Script printer Driver for Windows 7

We used to install this PostScript printer for previous Windows releases from
(winsteng) and run it to install the driver from the below location
http://www.adobe.com/support/downloads/detail.jsp?ftpID=1500
This doesnt work with Win 7 (The install crashes ) , Basically looking to do the same process with Win 7

X201 multi touch driver for windows 8 x64?

Hi
I'm using X201 (3093-96G) and I'm testing Windows 8 Release Preview.
The most is working fine.
But two things are not working:
- multi touch
- finger print reader
Have anybody better experiences?
Are there driver for windows 8 already?
thank you for any help
Steffen
Solved!
Go to Solution.

FIXED IT !
I downloaded (from my backup, driver version 3.1.1.3, driver date 12.01.2011, but I did Win7 fresh re-install and fresh drivers in October 2012) the old win7 driver installation files ( that I used before win 8 upgrade) to C:\DRIVERS\WIN\MTouch, went to Device Manager and selected "unknown device", which I knew was the Wacom Tablet, because all other drivers are just fine and working.
then select - right cklick - update driver software... - browse my computer for updated driver software - and browsed manually to the directory C:\DRIVERS\WIN\MTouch, check Include subfolders and click NEXT !
A warning appeared that the driver is the correct one, but hw device can not be found, after restart multitouch is working !!!
In dev manager there was exclamation mark on wacom tablet but it WORKed and the pen as well !!
Now I tried the "newer" tablet driver from Lenovo (todays download), but Windows 8 REFUSED IT !!! sayin that it estimated that I already have the best driver for my device !!
Now I was able to procced the full install by running setup.exe from used driver install directory and I must restart windows now, lets hope it still works after reboot

Adobe ps printer driver for windows vista. Where can I get it?

I need Adobe ps printer driver for windows vista. Where can i get it? Plz help me. If yes, then where and if no, why?
Any help is highly appreciated.
Thanks.

The Acrobat printer produces a PS file that is then sent to the Distiller process to create a PDF. The other PPD you mention is something I know nothing about. However, why would you want to use a different driver? The Adobe PDF driver is optimized for use in creating PDF files and other routes may not produce as good of a result. If the other PPD produces a PDF, then why are you asking about the Adobe driver?

Can anyone tell me if there is a new printer software/driver for Laserjet 1300 for Windows 7 64-bit?

I recently replaced my 2 Windows XP Media Center computers. I have a new Desktop with Windows 7 Ultimate and a Laptop that has Windows 7 Professional. I have an HP Laserjet 1300 printer that I would like to connect with my desktop. This printer still works. Keeping it would save me money. Can anyone give me the link to the Laserjet 1300 software/driver for Windows 7 64-bit?
Thanks in advance!

Hi donhkraft,
I am not sure what would cause the issue you are seeing, but you can try to download the driver from HERE instead.
Let me know if you need any other assistance.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

New Driver Creative Sound Blaster Live! 24-bit 1.04.0050 WHQL For Windows x64

This is the new Official Audio driver released by Creative for Sound Blaster Live! 24-bit for Windows x64.
You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found here
You have to boot in win98 or winMe using a boot diskette in order to run the fix.
enjoy
Markoul

Quote from: Markoul on 22-May-05, 00:07:32
This is the new Official Audio driver released by Creative for Sound Blaster Live! 24-bit for Windows x64.
You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found here
You have to boot in win98 or winMe using a boot diskette in order to run the fix.
enjoy
Markoul
Have you actually tired it yourself? I'm wondering if this is a workaround, or will this be the official solution. I wouldn't mind trying it, but I don't want to mess it up for when the Official driver is released.

Laserjet 1300 Driver for Windows 7 64 Bits

Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
I installed a generic driver which works OK for some applications.
But when using my Stenograph application the box that should be printed
around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

rainbowdog97 wrote:
Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p...
You can get to it through www.hp.com/go/windows7, where I also got PCL6.
I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
Thanks once again.
The links you cite take you to a page where there are links to:
HP Universal Print Driver for Windows PCL5 x64
HP Universal Print Driver for Windows PCL6 x64
HP Universal Print Driver for Windows PostScript x64
As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-225-121.html Personally, I found the "Universal Print Driver" impossible to install and configure. Congratulations on installing it -- even if it doesn't work.
On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7." That link basically leads nowhere useful for Windows 7. The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers. This conclusion is erroneous.
I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...) you'll get to an HP support page for using HP printers with Win 7. Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
HP and Windows 7 printer driver options available for the selected product
HP print driver available
Windows 7 print driver available
HP LaserJet AIO/MFP product options
Product will be supported
Selected product is not supported in Windows 7
The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7. This is not the Universal Print Driver. The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation). It only shows up if you permit Windows Update to update the list of built-in printer drivers.
I suggest that you completely uninstall your LJ1300. Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device." Then click on any other printer listed and then click on "Print server properties" in the menu bar. Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300. Uninstall anything to do with the Universal Print Driver from Control Panel > Programs > Uninstall a program.
Now, you can take one of two approaches:
What I did was just plug the printer in and turn it on. If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device. Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission. Windows will find the correct driver and install the printer.
Alternatively, go to Devices and Printers and start the Add Printer wizard. Tell it you're installing a local printer to LPT1. You'll get to the list of built-in printer drivers. Select HP in the left pane and scroll through the right pane. If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above. If you don't find an entry for the Laserjet 1300, click the Windows Update button. After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300. Cancel the process and add the printer as in the paragraph above.
Good luck.

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Deskjet 1280 Driver for windows 8.1 Pro

Hi Team,
I have upgraded my compter operating system from windows 7 professional to windows 8.1 pro now, I unable to install HP deskjet 1280 printer to new operating system.
Can you please send me a link to download the driver.
Regards,
Umesh

Hi @Umesh_kanth ,
I understand that you need the driver for Windows 8.1. I would be happy to help you.
I checked the website and unfortunately there isn't any drivers to be able to download for Windows 8.1 for the HP Deskjet 1280 Printer. But you should be able to install the printer with a Windows generic driver. Plug the printer into the computer to see if Windows will automatically install a OS. driver.
You might have to add the driver manually, here are the steps:
Go to the start up screen. (tiles menu)
Type in "Devices and Printers", select settings, click on Devices and Printers.
Click on Add Printer and follow the steps.
Select the HP Deskjet PCL3 Class Driver from the list.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP deskjet F370 driver for windows 8

I don't seem to be able to find a driver for Windows 8.1 that will allow me to use my HP Deskjet F370. Can anybody give me advice?
This question was solved.
View Solution.

Hello hnnh,
There are two ways to download and install the ful featured software for Deskjet F370..
1> Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
2> Or click HERE to go to driver page, select your PC OS , click next and then click on Driver and download full featured software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Photosmart 325 driver for Windows 7, 64 bit

I cannot find a driver for Windows 7, 64 bit to run the Photosmart 325 printer. Does one exist? Is there a work around? (The driver for Windows 7, 32 bit does not work)

Use the Photosmart 320 series driver available through Windows Update.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box. I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
www1.hp.com/...Universal Print Driver for Windows PCL5/
Hope this helps speed you on your way!

Thanks for sharing your tip RatioCynic! That's what this forum is all about!
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Printer 6122 driver for windows 7 x64

Similar Messages

Maybe you are looking for