Printer and copier works - scanner will not

printering, copying and scanning has worked perfectly since purchase of both printer and laptop. recently the scanning function will not work. Message panel says linkage (link, network, something) is not installed.
Can you tell me what to do? Is uninstall a good idea?
mdleap

Hi mle5usmc,
If you believe that this is an issue with your HP Products, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks once again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

PiXMA MP250 scan error 5,202,54. Prints and copy so scanner works. Has software problem.

PiXMA MP250 scan error 5,202,54. Prints and copy so scanner works. Has software problem. Need a fix.

Hi Horseheadjdj,
If you have any antivirus or firewall programs on your computer, please temporarily disable them and then try to launch MP Navigator again. Sometimes these programs can block the scanning process of the printer. If you still have difficulty opening MP Navigator, we can remove a file/icon on your computer named "My Websites on MSN" to see if this will resolve the issue. To do this, please follow these steps:
1. Click 'Start' and then 'Computer'.
2. On the left-hand pane, click the down arrow beside Local Disk (C).
3. Click the down arrow beside Users to open the folder.
4. Click the down arrow beside your username (for example Joe).
5. Click the down arrow beside the AppData (Application Data) folder.
6. Click the down arrow beside Roaming.
7. Click the down arrow beside Microsoft.
8. Click the down arrow beside the Windows folder.
9. Click the down arrow beside Network Shortcuts folder.
10. Locate an icon named My Web Sites on MSN.
11. Right-click on My Web Sites on MSN and select 'Delete'.
After performing this process, attempt to scan. If you still receive the same error after removing the file, or if the file does not exist, we can try to temporarily remove files from a folder called TWAIN 32 that may be causing a conflict with the MP Navigator program to try and resolve the issue. To do this, please follow these steps:
1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
2. Locate the WINDOWS folder, then double-click to open it.
3. Locate the TWAIN_32 folder, then double-click to open it.
4. Inside of the TWAIN_32 folder, you will see a folder for your PIXMA MP250 printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and PIXMA MP250 folder to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and PIXMA MP250 folder inside of the TWAIN_32 folder.
4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
5. Try to launch and scan using MP Navigator again.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

The colors are not true when i print and my sd card will not fit printer

The printer is hp7515 and the color of trees are blue and the water is purple,
i can not get my SD card to fit into printer

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I updated HP Printer Driver yesterday. Although I can pring and scan, none of th ePrinter Utility fubctions work - it will not read my printer details, clean print heads etc

I updated HP Printer Driver yesterday. Although I can pring and scan, none of the Printer Utility fuctions work - it will not read my printer details, clean print heads etc

This has happened with previous HP updates, so I suggest you go to HP's site to see if there are other complaints/responses.

My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

I just upgraded to Windows 10, and now the scanner will not work, although I can still print. I downloaded the latest driver, but this does not seem to help. The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks,

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
Paul

I upgraded to OS X10.9.4 and now my Cannon scanner will not work. I downloaded the new driver and still no luck.

I upgraded to OS X10.9.4 and now my Cannon MX 860 scanner will not work. The printer works. I downloaded the new driver and still no luck. Please help!

Open Print & Scan preferences. Select the printer in the sidebar list and click on the Delete [-] button. CTRL- or RIGHT-click in the sidebar area and select Reset Print System from the context menu. Re-Add the printer by clicking on the Add [+] button, select your printer from the little browser that opens, select the proper driver if it isn't set automatically, then click on the Add button. See if it now works.
Oh, be sure you install the new driver you downloaded.
BTW, you don't have a PowerMac as shown in your profile. PowerMacs were tower machines that ran PPC processors, not Intel processors. You really should correct that information in your profile.

After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?

Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps!

My HP Photosmart Printer/Scanner will not scan since installing Maverick help

Since installing Maverick my HP printer/scanner will not scan documents print or save them, how can I fix this?

this worked for my HP printer/scanner:
Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
if your printer is there in the column on the left:
control-click on your printer
select "Reset Printing System..." and "reset" in the dialog that follows
if your printer is not in the column on the left, go to the next step.
do a factory reset on your printer. You'll have to consult the printer manual for how.
if you connect to your printer/scanner via wifi, reset the wifi system:
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
if you do not connect via wifi, go to the next step
go back to printers & scanners and it should see your printer and download a driver for it from Apple.If it won't, then try going to the HP website and there may be a new software package for your printer that is compatible with Mavericks. Download and install it.

I have a new wireless router and now my laptop will not recognize the printer.

I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer. Operating system is Windows XP. Says it does not recognize the printer. It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment. Thanks.

You must reinstall the full feature software and drivers again to be sure it will work with the new router. This is the fastest way. Simply follow the instructions that came with the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

What A3 scanner will not work with CS6

I cannot find a solution, my exisiting A3 Mustek scanner will not work because Twain is no longer supported. OK what do I replace it with? Can any body help, because photyoshop and scanners are a marriage of necessity!
NapNap

You will have no alternative but to wait for Epson to update their drivers to be compatible w/Mavarick. Why not call them (tech support) or send them an email?

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Have you attempted a restore?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store.

Printer and copier works - scanner will not

Similar Messages

Maybe you are looking for