Printer configure in A3 SIZE

Dear Expert,
I am using ECC 6.0 on HP Unix.I want to configure Laser Printer in my SAP .One Printer is already configure in my SAP .In this Three Tray is there . In first tray A4 size paper , In second Tray A4 size later head and in Thired Tray  A3 size paper.
This Printer is already configured . But in this A3 size printing not comming.
All printing is comming in A4 size .
I want to configure this printer that A3 size report come in proper printing . So that everybody can read it . In A4 size that report can,t be read properlly.
thanks for advance
Manu

To add HP printers I suggest using JetDirect Printer installer:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=13037&prodSeriesId=27349&prodNameId=18922&swEnvOID=7&swLang=8&mode=2&taskId=135&swItem=ja-6671-1
Follow the installation instructions and the readme on the same page.
Markus

Similar Messages

  • How do you configure the ipad to print air print but of A4 size please ??????

    how do you configure the ipad to print air print but of A4 size please ??????

    Frankie,
    The usual setting is in Printing Preferences.
    In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
    I can provide details and "how-to" if you need more help.
    Printer model info would be helpful, and do you have your printer software loaded yet?
    I hope this helps!                                 
    We work hard to help!
    When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
     2012 Year of the Dragon!
    Dragon Tips!
    Install your Printer Software!
    Look for your Printer’s Software at your printer’s own website!
    Software, manuals, alerts, “how-to” information, and much more!
    To see if there is software for your printer, Start at:  Support and Drivers
    Kind Regards,
    Dragon-Fur

  • Printing Invoice Dot Matrix Printer  in the paper size 9.5 x 11 inches

    Dear All, 
    Am using Pre-printed Stationery but I have a problem with  printing configuration for AR Invoice through Dot Matrix Printer in paper size 9.5 x 11 inches, when command to print the first page it print perfect but the continuation  is not start on the body of the contents but it start from the header of the pre-printed stationery  any one with experience on this please share with me.
    Regards
    Grayson

    hi,
    Have you customized PLD according to paper size ?
    Check whether you customized fields in start of report area ? If yes then it will be printed
    only on first page.
    Check for printer supported by B1 in below link
    [SAP Business One Best-Practice System Setup and Sizing document ]
    Jeyakanthan

  • Printing Issue - Custom Media Sizes, InDesign CC/Mac Mavericks

    Hi all,
    I've got a strange problem that I hope someone can provide some insight to.  Perhaps this is a bug, but I'd rather ensure that there isn't something here that I haven't understood.
    I have a project that I periodically modify and re-print on custom size media (3.25" x 7.36").  I've used the same Id document and workflows since, probably, Id 2 or 3, updating each time to the latest versions.  The problem may be in the way Id CC interacts with the MacOS X printing system.  The printer in question is a Xerox 8550.
    The project is a one page table printed on this particular card stock.  What's happening is that the printable area on the stock isn't being fully used - the top and bottom of the media aren't being printed - thus the top and bottom of the content is being cut off, in a way that wasn't an issue previously.
    The printer control panel prompts for and accepts the media size correctly (I believe these printers have checks to ensure media fed matches the printable area; the Phaser engine doesn't like printing "off the paper"). 
    Again, the same document has been used for many years, so I've tried the following steps to isolate and remediate the problem:
    Document Setup: Custom Page Size, verify correct for media.
    Print dialog: "Page Setup..." format for (custom media size defined for OS X), also verified to be correct for media.
    Print dialog: "Setup", paper size Width and Height, correct; orientation correct, offset and gap 0p0, scale 100%.
    Print dialog: PPD correct.
    Recreated document, re-entering sizes and verifying setup.  No change.
    Created a test document, with same settings, and a scale extending outside of the printable area.  The specs for (and my experience with) the printer are that the printable area is 5mm from the edge of the paper.  The result of the test is that the content is cut off at 10-11mm from the edge instead. 
    Exported PDF from Id.  Printed using Preview, same OS X page setup configuration.  Printer prompts for correct media size.  Content in test file prints as expected, to 5mm from media edge.
    Printed test document from Acrobat XI, using "Actual Size", "Choose paper source by PDF page size", and "Use custom paper size when needed".  Printer prompts for correct media size, content prints as expected, again, to 5mm from media edge.
    So, in brief, exported PDF prints properly (and this is a workaround), but it's a pain that Id has this issue.  All software involved is up to date.  I haven't tried to dig into the PPD, as PostScript isn't one of my areas of strength, but I'm reasonably sure it's correct.  I've also tried a similar test using Letter-size paper, and that also prints to 5mm. 
    I'd love to get some feedback on this.  Many thanks.

    For what its worth, I've been trouble shooting this issue with Adobe / Xerox / Apple for some time now. Here are my findings so far:
    --------------------------------------------------Adobe's final response after a very long help ticket--------------------------------------------------------
    This Email is in regards to the case related to the adobe application and Printing issue ,
    As checked we were able to see that application  is able to create the document with correct size , when checked within Adobe Pdf properties the size was showing as per document specification and when we tried to print the same , the document was showing the same values carried forwarder to the printer and in the preview it was showing the same specific setting of the document size in the printer previewer
    It was during the printing process the same value are not being calculated correctly as per our interaction ,  you were able to use the same in the previous version of Mac  10.8. 5 , please check if there is any update available for the 10.9 version of mac and if it would work on the same ,we would request you to contact your printer help support for the same we are leaving the case open and would request you to call us back if there is any further issue  on  800 833 66 87 
    Thanks and Regards
    Jatinder
    Adobe Technical Support
    --------------------------------------------------Xerox's response, after an escalated level 2 ticket--------------------------------------------------------
    Here the Decline from 3rd Level Engineering.
    2nd Level Reference #: 19458297
    Customer Name: VDB REAL ESTATE
    Product Model: Phaser 7800
    Problem Summary: Scale is incorrect when printing PDFs on custom size paper in OS X 10.9
    Decline Reason: App/3rd party Issue
    Note: I tested using the included process steps:
    STEPS TO REPRODUCE-
    I tested using a PDF that was 6" x 8.5".
    In Acrobat or Adobe Reader, choose File > Print, go to Page Setup and create a custom page size of 8" x 9.5".
    In the Acrobat dialog, set the size to "Actual size".
    Print this to the device, note that the image is about 7" x 10".
    Interestingly, in the Acrobat dialog, if "Choose paper source by PDF page size" is selected, the previewed page size is not that of the document, but instead shows 10.13" x 7.17".  This size will change if different printers are selected.
    Scaling is not an issue when printing to standard page sizes.
    I was able to recreate the issue on a Mac running OS 10.9.1 using the Xerox 7800 print driver. I then tested on Mac OS 10.9.1 using a generic Postscript driver and also recreated the issue.  This indicated that this is not a Xerox driver issue.  I then tested on a Mac OS 10.8.5 using the same Xerox 7800 driver version and it worked as expected without scaling the image.
    Mac OS 10.8.5 uses CUPS version 1.6.2 for printing where 10.9.1 uses CUPS version 1.7.  I believe this is a CUPS issue and you will need to work with Apple to resolve it.
    You may appeal this decision by replying to this email and providing appeal details.
    Regards,
    Faye Hanley
    Technical SPAR Administrator
    Technical Escalation Support Office
    Xerox Corporation
    400 Main Street, Suite 2040
    Saint John, NB, E2K 4N5
    Phone: 1-888-380-9422 Opt 4
    --------------------------------------------------Apple's response, after an escalated ticket--------------------------------------------------------
    While using 10.92 with Xerox Phaser 7800DN (2.94.1 PPD - Installed via Software Update), PDF at a custom page size was sent to spool folder via Preview was correctly sized, however the document produced by Adobe Reader appears to be icorrect. When using Preview the PDF printed to a custom page size at 100% scale comes out the proper size.
    Carol West
    Apple
    P.S. If you wish to reach me regarding this case, please contact me at 1-877-388-0879 Ext. 85789
    **this is a paraphase of what the engineer (Clay) sent back to Carol West who was assisting in my help ticket. She was not allowed to send me the engineer's findings in email, she was only allowed to read it to me over the phone as I typed it out.
    Basically go back to Adobe and ask for help there. I guess at least the circle is closed as I am back to where I started.

  • How do I get OS X to ask printer for custom paper size

    I am printing postcards.  These are 1/4 of a letter sheet, or 5.5" wide x 4.25" tall.   
    I have a commercial grade HP Laserjet 4350, and I've configured that size in its custom menu for tray 1 (the envelope feeder tray). The printer is happy.
    I've also set a custom paper size in the MacOS, that I've called "Postcard Quarterpage" and I have that selected in the print dialog.  In fact I made it default.
    However, under Paper Handling, it says "Destination paper size: Suggested paper: US Letter" and this is greyed out.  If I check "Scale to fit paper size" which I Do Not Want, then I can pick a variety of sizes.  However my custom size is not in the list. 
    This happens on all applications, so it is definitely OS X Mountain Lion (latest patch).
    Anyway, the upshot is MacOS requests US LETTER size from the printer, so the printer goes "Take this postcard stock out and gimme US LETTER".    The printer can detect paper sizes.  If I try to give it postcards anyway, it blows an error and won't print, which is what it should do.
    How do I get OS X to tell the printer "Gimme 5.5x4.25" like I've instructed it? 

    Hi there Wolf!
    I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
    OS X Mountain Lion: Manage custom paper sizes
    http://support.apple.com/kb/PH10748
    Note that in that article, it states:
    Custom paper sizes aren’t available for some printers.
    The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
    Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
    Mac OS X: How to reset the printing system
    http://support.apple.com/kb/HT1341
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How to save the print configuration

    Hello, in my business, employees need to print multiple documents per day.
    But for these specific documents, they need to print with a size of 105%.
    My question is how to save the print configuration because they need to remplace the size by 105% every time ...
    Please help me
    (Sorry for my bad english, i'm french)

    it was here : http://www.hostingpics.net/viewer.php?id=684187301.jpg
    this screen appear after i press File -> print
    and i need to put 105% every time i want to print document, how to save this ?
    edit : this is not in the printer configuration

  • Unable to print an image full size

    Using photoshop elements 12 I cannot get the image  to print at the required size, will only print a small image in one corner of print medium.

    What happens when you choose to save it as a PDF document from the Print dialog? If the PDF document is subsequently opened in Preview, does it appear as expected? If so, then there's nothing wrong with AppleWorks.

  • I am trying to print a passport sized headshot and I get a full page photo. How to I print out a smaller size?

    I am trying to print a passport sized headshot and I get a full page photo isntead. I downloaded the shot from i photo and chose "small" but it didn't help.
    I also cropped the photo on iphoto to the dorrect size but no difference. I have a Canon MX 870 printer. Please advise.

    In iPhoto select the photo and print - select the paper size and a custom print size (2x2 i believe for passports) and print
    LN

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • How to avoid print configuration screen

    Hi everybody,
    I'm executing a program which has to print two smartforms, one followed by the other, but I don't want the printing configuration screen before printing each one, I want it only to appear in the first one and then inherit printing parameters in the next smartform and avoid the screen.
    How can I do this? I think that is by using output_options parameter but I don't know exactly how.
    Many thanks,
    Cristina.

    hi,
    I understand that you have your own program that triggers both Smartforms, one after the other, right?
    Try this:
    In your program trigger the first smartform (and have the print config screen popup)
    WITHIN that smartform you trigger the second Smartform and suppress the the config screen.
    Since the output options are know at this point you can pass them to the second smartform.
    I hope it helps,
    regards,
    Joris Bots

  • When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

    When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
    Please help!

    It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

  • ORARRP doesn't print to a printer configured through TCP/IP.

    Could any one using ORARRP pls. help ? I am pasting the TAR contents I opened with Oracle Support.
    Oracle Support doesn't support ORARRP. They referred me back to discussion forum.
    Thanks,
    RK
    Resolution History
    22-MAY-02 19:25:05 GMT
    Can you easily recover from, bypass or work around the problem? = NO
    Does your system or application continue normally after the problem occurs? =
    YES
    Are the standard features of the system or application still available; is the
    loss of service minor? = YES
    ### Problem Description: ###
    I am using windows 2000. I found an article which said there is a new release
    of ORARRP for windows 2000. Can I obtain the latest release of ORARRP.exe ?.
    I am having trouble printing with ORARRP. I select the output file from the web
    by clicking it. and it opens the printer dialog.. I hit O.K and nothing is sent
    to the printer.
    Need help.
    ### Upgrade or New Install?:###
    Neither
    ### Error numbers/messages:###
    no error messages.
    ###Log files faxed/emailed or uploaded ###
    Uploaded
    ###Any workarounds ###
    none
    ###Name & Version Details ###
    none
    ### Were you able to complete this process previously? When? ###
    no
    ### Can you duplicate the issue? What is the navigation path? ###
    yes
    ###Is the problem in all environments? If not what's the difference?:###
    Not Sure. Need to check with some one else who uses windows 2000.
    ###Any patches applied recently?:###
    none
    Contact me via : E-mail -> [email protected]
    23-MAY-02 00:09:27 GMT
    Issue needs to be addressed with Oracle Reports Developer. XFR->TOOLSREP
    23-MAY-02 01:06:04 GMT
    New info : Hi Oracle Support,
    I found that the ORARRP works fine and submits report to the Printer if the
    printer is defined through Novell Netware Network.
    But if the same printer is defined through I.P address directly as a local
    Printer it doesn't work. ( Add new port , Standard TCP/IP port method in
    Windows 2000).
    Does it give us any clue to solve this issue ?.
    Pls. Help.
    Thanks,
    RK
    23-MAY-02 13:19:58 GMT
    Investigating this issue...
    23-MAY-02 13:32:25 GMT
    Hi,
    My understanding is that you where trying to print using ORARRP utility on the web
    Since you are trying on an muti-tiered server(that is web is 3-tier)
    by default this report will be printed out to the default printer assigned to
    the application server machine , NOT to the client machines default
    printer.
    For example,
    Machine 1 - the application server machine
    Machine 2 - the client machine
    Machine 2 submits a request to run a report to the multi-tier server with
    DESTYPE set to PRINTER; DESNAME is left blank.
    Printing will be on the default printer of Machine 1(Application server)
    and not on Machine 2(Client PC)
    If I am wrong inmy understanding, please eloborate
    Best rehards
    Chandru
    23-MAY-02 13:32:44 GMT
    Email Update button has been pressed -- Sending email.
    23-MAY-02 15:08:03 GMT
    New info : A Big No. We are running the 10.7 version of Oracle applications and
    there is no middle tier per se.
    All we have done is to define a new printer called "LOCAL_PRINTER" and when
    users select this printer the initiaization string which the Print command
    sends to the printer before sending the file gets added to the output file and
    the output file is stored in a directory which is accessible through a web
    server.
    Users invoke the browser and point to the website where the output files are
    avaiable. and then click on their request ids. Since the extension of the file
    is .rrpt the ORARRP utility brings the Printer dialog where we have select the
    printer.
    This setup was working sucessfully till so far. ( Past 1 year).
    Now it suddenly didn't work for a user's printer which was connected to her PC.
    Since I had windows 2000 on my laptop and I tried the same and found that the I
    select a PC which is defined through I.P Address then it is not working. But
    if I select the same printer defined through Novell Netware it is working.
    Please let me know if you are getting the picture. if not may be we can do a
    webex session or something like that.
    Thanks,
    RK
    916-630-3508
    23-MAY-02 15:51:40 GMT
    Hi,
    Sorry, I do not find any related notes on this issue
    Possibly the PDF by name orarrp1.3.4.pdf in the ZIP file [downloadale at http://otn.oracle.com/sample_code/products/reports/files/Orarrp_1_3_4.zip] could show some pointers on this issue.
    This PDF about this utility and is the only document I could find on this issue
    ORARRP is a sample supllied "AS IS" to customers and is currently not supported by Oracle Support
    Users facing any issues with this utility are encouraged to share their experiences in OTN forum at http://otn.oracle.com
    This forum is being monitored by Product Management who can help customers as well as provide fixes for this utility
    Please close the tar and post in OTN forum
    Thanks
    Chandru
    23-MAY-02 15:51:51 GMT
    Email Update button has been pressed -- Sending email.
    23-MAY-02 10:24:13 : CHANGES MADE VIA MetaLink
    NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
    Closed by customer
    Closing the TAR

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • I'm trying to print from a full size 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer?

    I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

    You might be better off contacting an AutoCAD support group.

  • Printing.  My prints are not printing at the proper size.  If I designate 5x7 it prints at something around 4x3.  I have set all the parameters.

    My prints are not printing at the proper size.  If I designate 5x7 it prints at something around 4x3.  I have set all the parameters.

    When you saye a you have set all the parameters, does that include the cell size in the print module? Are you printing on 5 x 7 paper? And, if you are, have you set that paper size in the page setup?

  • Is there any best practice for printer configuration for test environment?

    My Oracle ebs test environment has a scheduled refresh period where it will be refreshed with production test data and configuration time to time for BA, Dev to work on their enhancement.
    However, all the printer configurations are still pointing to production ones after refreshed, which means whenever there is a testing on-going, the doc / label / invoices will be printed to production printer.
    May I know if there is a way to globally change all the printer setup for the test environment, so that nothing will be directly to production?... Please assist.
    (currently, the only way is to change one by one and only if you are aware of it...)
    In case your organization has any other strategy on this matter, pls share also... Thanks a lot.

    user6775047 wrote:
    My Oracle ebs test environment has a scheduled refresh period where it will be refreshed with production test data and configuration time to time for BA, Dev to work on their enhancement.
    However, all the printer configurations are still pointing to production ones after refreshed, which means whenever there is a testing on-going, the doc / label / invoices will be printed to production printer.
    May I know if there is a way to globally change all the printer setup for the test environment, so that nothing will be directly to production?... Please assist.
    (currently, the only way is to change one by one and only if you are aware of it...)
    In case your organization has any other strategy on this matter, pls share also... Thanks a lot.If you do not want to use same printers then you have to it to point to the (TEST/BA Printers) after you are done with Rapid Clone. Any new printers need to be added manually (just the same way you defined you PROD printers) -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
    If you want to edit the configuration, you could use FNDLOAD to download printers definition from the source instance, update the ldt file and use FNDLOAD to upload printers definitions.
    Is It Possible To Download/Upload Printer Definitions Using Fndload [ID 432616.1]
    Tips About FNDLOAD [ID 735338.1]
    Thanks,
    Hussein

Maybe you are looking for