Printer- custom report not printing

HI,
Apps 11.5.10.2
RDBMS 9i
Am able to get print from appliaction for stanadard reports.
If i give custom report.. its printing but content is not same as output..
OUTPUT is coming in one line..
%PDF-1.1
1 0 OBJ
<< 0
/Creator (Developer 2000)
etc
Thanks

HI,
Am getting output like follwing
Please run the test in (Note: 264118.1 - 11i : Pasta Pasta Printing Setup Test) to verify that PASTA is configured properly.------------- Test Result Summary -------------
Total Tests: 1
Success Count: 0
Error count: 1
Test Names Status
oracle.apps.izu.fnd.diag.FNDPastaDiag Succeeded with Warnings
----------- End Test Result Summary -----------
============= Test Result =============
Test Class Name: oracle.apps.izu.fnd.diag.FNDPastaDiag
Application Code: FND
Group Name: Setup
Status: Succeeded with Warnings
Time: 2010-07-06 11:57:07.0
Time Consumed: 8154
Test Version: 115.8
Tool Version: 115.131
Install Version: Base: none Upgrade: none
Mode: 1
Index: 1
Tested Class Name Tested Class Version
oracle.apps.izu.fnd.diag.FNDRequestIDLov 115.4
oracle.apps.jtf.regress.qatool.base.DBUtility 115.1
oracle.apps.jtf.regress.qatool.base.DiagBase 115.2
oracle.apps.jtf.regress.qatool.base.FileUtility 115.1
oracle.apps.jtf.regress.qatool.base.HRInfo 115.0
oracle.apps.jtf.regress.qatool.base.OSUtility 115.5
oracle.apps.jtf.regress.qatool.base.SessionHelper 115.0
oracle.apps.jtf.regress.qatool.fnd.FNDUtility 115.10
Input Names Input Values
Responsibility ID 50300
Request Id 320444
Diagnostic Test Executed By SYSADMIN
Dependent Class Names
Report:
Oracle Diagnostics Information Product Installation Status and Patchset Level Parameters
Generic Tests Language Information Pasta Driver Settings
Concurrent Node Environment Variables Pasta Viewer Settings to View Bi-Directional Reports Bi-Directional Specific Settings
Retrieving Log and Configuration Files for Support References
Database Information [Top]
Server = rofdbs5
Version = Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
Name/SID = STAGE
Language = AMERICAN
Character Set = US7ASCII
Application Information [Top]
Release = 11.5.10.2
Application = Projects (275) with status of INSTALLED
Responsibility = RI_Projects Superuser (50300)
MultiOrg Flag = Y
Operating Unit = RI Operating Unit (104)
Security Group = Standard
Oracle Diagnostics Information [Top]
Patch Oracle Diagnostics 2.5 RUP A (5914893) is installed
Patch Oracle E-Business Suite 11i Diagnostic Tools, Nov 2008 - 8.11 (7530017) is installed
Metalink Document Id = 264118.1
Product Installation Status and Patchset Level [Top]
Application Short Name Id Installation Status Patch Level
Application Object Library FND 0 Installed 11i.FND.H
Applications DBA AD 50 Shared 11i.AD.I.6
System Administration SYSADMIN 1 Installed Not Available
XML Publisher XDO 603 Not Installed 11i.XDO.H
4 rows retrieved
Parameters [Top]
Username = SYSADMIN
Responsibility = RI_Projects Superuser (50300)
Request Id = 320444
Generic Tests [Top]
Node Information
Tiers = Admin, Web, Forms, Concurrent
Pasta Executable Version
Version = 3.0.4.0(patch
Oracle Reports Version
Detected version 6.0.8.28.0 is >= expected version 6.0.8.18
Language Information [Top]
Installed Languages
Language Code Installed Flag NLS Language
US Base AMERICAN
1 row retrieved
Database Character Set
Database character set = US7ASCII
Pasta Driver Settings [Top]
Printer Name = CD1230
Printer Style = PORTRAIT
WARNING - Driver PORTRAITHPLJ3-A4 is not defined for pasta printing
ACTION - For pasta printing please modify printer driver PORTRAITHPLJ3-A4 to have FNDPSTAX as program.
Reference: Oracle Applications System Administrator's Guide
Pasta PrintForms
The printforms feature is not used. To insert a company logo or background image in a concurrent report please refer to PASTA 3.0 Release Information
Pasta Configuration File
The pasta executable chooses the non default configuration file defined as a driver argument '-F' using the following rules (in the following order):
1. Configuration file associated to the specific printer
2. Configuration file for all the printers
Current settings
The PASTA variable is not set
The file '/stageAPP/stageappl/fnd/11.5.0/resource/pasta_CD1230.cfg' does not exist
The file '/stageAPP/stageappl/fnd/11.5.0/resource/pasta.cfg' exists
Configuration file in use = /stageAPP/stageappl/fnd/11.5.0/resource/pasta.cfg
Concurrent Node Environment Variables [Top]
NLS_LANG Variables
Database = AMERICAN_AMERICA.US7ASCII
OS environment = AMERICAN_AMERICA.US7ASCII
Concurrent Request = AMERICAN_AMERICA.US7ASCII
Pasta Environment Variables
LANG =
PASTA =
IX_PRINTING =
IX_RENDERING =
APPLLCSP Environment Variable for Bitmap Report Printing
APPLLCSP =
Pasta Viewer Settings to View Bi-Directional Reports [Top]
Bi-Directional Mime Type
WARNING - The mime type 'apps/bidi' is missing
ACTION - Create a new mime type as mentioned in the PASTA Users Guide 3.0. See also PASTA 3.0 Release Information
Profile Options
Viewer: Application for Text (FS_MIME_TEXT) = null
Viewer: Text (EDITOR_CHAR) = Browser
Bi-Directional Specific Settings [Top]
The current database character set does not require bi-directional settings
Retrieving Log and Configuration Files for Support [Top]
Adding file '/stageAPP/stageappl/fnd/11.5.0/resource/pasta.cfg' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
This test cannot get the IX Library configuration file (ixlib.cfg) because environment variable IX_PRINTING is not set. For more information see note Oracle Reports 6i Setup Guide for Oracle Applications 11i
This test cannot collect the IX Display configuration file (ixlib.cfg) because environment variable IX_RENDERING is not set. See note Oracle Reports 6i Setup Guide for Oracle Applications 11i
Adding file '/stageAPP/stageora/8.0.6/guicommon6/tk60/admin/uiprint.txt' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
Adding file '/stageAPP/stageora/8.0.6/guicommon6/tk60/admin/Tk2Motif.rgb' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
Adding file '/stageAPP/stageora/8.0.6/guicommon6/tk60/admin/uifont.ali' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
Adding file '/stageAPP/stageappl/fnd/11.5.0/reports/HPP.prt' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
Adding file '/stageAPP/stagecomn/admin/log/STAGE_rofdbs5/l320444.req' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
Adding file '/stageAPP/stagecomn/admin/out/STAGE_rofdbs5/o320444.out' to '/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip'
Please upload the generated output file (/stageAPP/stageappl/izu/11.5.0/out/PastaPrinting.zip) when creating the service request
References [Top]
Note 239196.1 PASTA 3.0 Release Information
Note 240864.1 Activating and Configuring IX Library
Note 189708.1 Oracle Reports 6i Setup Guide for Oracle Applications 11i
If you are experiencing any issues regarding this diagnostic test, please use Metalink to log an iTAR (Service Request) for product "Support Diagnostics Project" (ID=1332).
If you have any question related to support diagnostic tools (installation, execution, usage or availability), you can ask us using the Support Diagnostics Project forum on Metalink.
We would also appreciate your feedback regarding the usefulness of this test, however, there will be no replies to feedback emails.
Error Message: 0 errors and 2 warnings were found.
Fix Info: Please review the test summary for more information.
============ End Test Result ============

Similar Messages

Smart forms- when i print a report it print main window data on same page

hi,
when i print a report it print main window data on same page .
i.e. if data is more then one page then it shows data page wise on computer screen but when i print it print all data on same only one page by over wrriting .
pl. help why it is happening
i create page in page i set next page and in second page give first page.
mukesh

mukesh,
what happened to this: smart form
close that please.
by the way,did you tried with what i suggested?
lets say mainwindow in 1st page.
copy the first page to second page.
now.
for 1st page: next page is : page2
for page2: next page is also : page2

Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

That's very strange. See if clearing the cache in Safari will make it work. I'll include the steps below. If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't. If it will, then something is wrong with Safari. If it doesn't print, then the web pages might have printing blocked. There are sites that are doing that for copyright reasons. Let me know what you find.
To clear the cache on Safari:
Open Settings.
Select Safari
Touch Clear Cache.
Select Clear.
Touch Clear Cookies.
Select Clear.
Touch Clear History.
Select Clear.
I am a printer tech for HP.

My hp printer 7520 is not printing the black ink.

hp 7520: I have an empty photo black in but I have not printed photos. I have replaced the other black (with a pentagon) but the printer still seems to be using the empty photo black(bow tie icon) - (and i have no black being printed). I have no spare black bow tie ink,and i don't need it anyway. Help

Hi @southmimms
The black cartridges have their own purpose, the photo black is for printing photos and the Black is for text. The second black cartridge is not there to back up the first one when it becomes deplete. When a cartridge is depleted it needs to be replaced.
Source
Since you replaced the black cartridge, and the printer is still not printing black ink, one of the first things that comes to mind is the cartridge vent. Please use the steps below to check and clear the vent area;
Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
1 - Clogged vent
2 - With a straight pin, gently remove excess adhesive from the vent
3 - Unclogged vent
If the issue persists, please use the following document to troubleshoot the quality issue you are experiencing. Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Finally, if you complete all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video. I only suggest doing this if he printer and printhead are out of warranty. Hot Water Printhead Flush - HP Ink Series Printers with removable Printhead.
I have recommended this solution to others and have seen success, but I can not guarantee this will resolve the issue, it is an end of the line kind of effort. I hope it helps.
I hope one of my recommendations resolves the issue.
Note: Although you do not use the photo black it is important to replace empty cartridges to protect the printhead from becoming damaged.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Adobe Flash 11.9.900.152: objects not showing in print preview and not printing

When I select print from Adobe Flash 11.9.900.152, objects are not showing in print preview and not printing on the printer. I have tried to print from both MS Internet Explorer and Google Chrome--neither work.
I am using:
Windows 7 Home Premium Service Pak 1
Internet Explorer 10.0.9200.16618
or
Google Chrome 31.0.1650.57 m
How do I resolve this issue?

What is it you're trying to print?

HP Photosmart Premium C310a printer that will NOT print in BLACK. It will print in color.

I have a Photosmart Premium C310 a printer that will NOT print in BLACK. I tried the unplugging the cord and holding # and 3 and it did not work for me. I, at first, purchased a new cartridge thinking it had run out of ink.........so now I am out $25.00.
Any other suggestions. It does print in color. HELP! HELP! The printer is not even 5 months old.

Can I ask are you based in the US?
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Printer ready but not printing

I have a HP Deskjet F4135 all in one printer. Every once in awhile I will connect my printer to my laptop and it will say its ready to print but when I try and print it will not print it will just show in the document screen "Printing" and then occasionally it will show like "4/1" under the pages column. I have tried canceling and restarting documents and even turning my computer completely off. Please help!

Hi Netoid,
Welcome to the HP Forums.
I see that you are having an issue with printing from your laptop.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

TS1702 IPad prints photos via canon printer but will not print a document

My I pad prints photos via canon air printer but will not print a document

Which model Canon printer? Is it AirPrint compatible?

Envelope in print queue will not print.

Envelope on print queue will not print. other documents print ok.
I tried "RESTART" of the document to no avail.
problem started after I ran the utility to clean the rollers because envelope would not feed. In the past this has worked fine.
I can print regular documents, just not envelopes.
Tried, power down/power up. Tried reboot.
Windows XP
2575 photosmart all-in-one

Problem solved. I deleted the printer and reinstalled a few times and it now works.

Print jobs will not print

I have an 8620 that is enabled for web services. The printer is listed on the HP Connected site. I emailed a document to the email address on the printer and it is sitting in a status of "Sending to printer". I also enabled the printer for Google Cloud Print and I have 2 jobs there claiming to be "In Progress".

Hi @browetally,
Thank you for being an active member of the HP Support Forums. I gather that you have ePrint jobs that are pending and have not printed on your Officejet 8620 printer.
Are the print jobs still pending? If yes, please try the steps in The HP ePrint Print Job Did Not Print document. If the print jobs are still stuck after attempting the steps in the ePrint trouble shooting document, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing blank report, not always

Post Author: Simthembile
CA Forum: Crystal Reports
Good Day
The Version of crpe32.dll on remote users machine is 8.0.0.371,Product version is 8.0.1.0,
the crystal reports deployed are version 8.5.Any known issues that might arise because of this.
We are having a situation in which reports can be previewed but when sent to a printer they print blank but not always.
At there moment all these reports happen to be subreports. Please help .
Kind Regards
Simthembile Reuben

Post Author: Simthembile
CA Forum: Crystal Reports
Good Day
The Version of crpe32.dll on remote users machine is 8.0.0.371,Product version is 8.0.1.0,
the crystal reports deployed are version 8.5.Any known issues that might arise because of this.
We are having a situation in which reports can be previewed but when sent to a printer they print blank but not always.
At there moment all these reports happen to be subreports. Please help .
Kind Regards
Simthembile Reuben

On Demand sub report not printing in IE and Other Browsers

Hi All,
We have developed Crystal report for our web application with version 13.0 and Visual Studio 2010.
When we run our web app in IIS report display fine in All web browser and when we print report in ActiveX mode in IE 9+ for main report it prints fine but if we print on demand sub report it not printing even a single page out of 2 or more than 2 page.
If on demand sub report has only one page then it will print in IE 9+ browser.
Even If we click on Export button on demand sub report easily export to pdf or any formate the issue while we print it.
It going to hanged while we print on demand sub report with more than one page.
Please help in this issue.
Also please let me know if you want more detail.

Not sure why you created two Discussions on the same issue? (CR on demand sub report goes hang in IE)
Locking this Discussion.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Transaction Register Report not printing Correctly

Hi,
In Accounts Receivables Transaction Register Report is not printing correctly..
Once I issue print job for Transaction Register Report...Blank page is coming..
what is the cause..please suggest

Does the print work properly with other reports? If so, I suggest you run the report in debug mode. Please check (Note: 226013.1 - How to run AR RXi reports in debug mode) for more details.
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=226013.1

WebI Report not printing correctly

Hi,
I've a WebI report for whcih the page layout is set as Letter and orientation set as Portrait. when I export this report and try printing it, the print preview shows that single report page is coming up in 2 pages while printing. however when I set the magrings as 0.25 for all the sides while printing the report appears good. Is there any wasy of superimposing these values in WebI report so that this is not needed to be done manually? Or is there any other methos to get it fixed?
Please help!
Thanks!
Neha.

Hi,
You can use, format table-> avoid page break(horizontally and vertically). Also at page setup toolbar,
you can set your pages to scale a certain number of pages. Just change "automatic" value to 1 page for horizontal and vertical page layout, and you won't get second pages.
Regards,
Onur

Web Report not printing the fiscal year period variable value

Hi,
In web report where in one text element, we enabled the fiscal year period variable value to display
in the report result.
If we run the report then this fiscal year period is displaying in the general information.
We have print button (Java Code), where user can take a printout of the same report.
In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
It is required to print the fiscal period also in the print out of the report.
Any help to come out of this.....
Thanks
Srinivas

Hi
Any Help.....
Srini

Printer- custom report not printing

Similar Messages

Maybe you are looking for