Printer deliveres 2 sheets. The first is printed, the second is blank
Greetings,
I have a 2007 HP LaserJet M1319fMFP multa purpose printer. It has been in storage for a while but is clean. Every thing works except this problem. It will be used as a stand alone printer in a church minestry. It now is connected to a laptop running windows 7. I downloaded all available downloads from HP for this printer and installed them. This did not help.
The problem is that when it is suppose to print 1 sheet , it in fact prints that sheet , cycles and feeds through a blank sheet.
This is done on all types of printing.( test page, reports-menu structure and from the copy function)
This happens every time it prints. I have done all of the suggested things to fix it and same problem every time.
Thanks for your time. I appreciate your help.
Regards,
w-bar
Hi @w-bar ,
I understand that you are having issues when printing a document or standalone test pages, a second blank sheet always follows. I will certainly do my best to help you.
Since you are having this issue also when printing the self test, I would update the printer's firmware. HP LaserJet M1319f Multifunction Printer Drivers. Select your operating system, click next, click the link for firmware.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Hard Reset: Power on/Power off (verify LED) Power cycle unit by switching the power switch off, wait for 10 seconds, then power on.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Similar Messages
-
RE Acrobat XI Standard. When printing a 30x42 Drawing PDF with more than 1 page only the first page prints properly the rest are not the proper size or centered. Did I miss a setting? For now I can work around it by printing each page using the "Current Page" setting, but this delays me when there is more than 20 pages etc..
RE Acrobat XI Standard. When printing a 30x42 Drawing PDF with more than 1 page only the first page prints properly the rest are not the proper size or centered. Did I miss a setting? For now I can work around it by printing each page using the "Current Page" setting, but this delays me when there is more than 20 pages etc..
-
In the past, the same printer would print only half of the first page of the email.
Now I am trying to print four page statements from Chase Bank online account.Some style rules that work fine on screen cause problems for Firefox when paginating, with content sliding out of position, getting cut off, or generating extra pages. For best results, look for a special "printable" layout for your email messages. There may be a link for this, or an icon, or a menu items (e.g., on a ... menu). If it's a commonly used site, someone may know exactly where it is.
For statements, often these are in PDF format and you may get better results as follows:
* If you are using Adobe's PDF plugin, use its print icon (floating toolbar) instead of Firefox's print button.
* If you are using Firefox's built-in PDF viewer, try opening the PDF in your regular PDF viewing application instead of printing it from Firefox. You can use the download icon on the black toolbar above the document (below the regular toolbar area) to do that. -
Anyone know how I can 'fix' the Mac OS printer driver for the Canon 9500 Pro - all my text lines end up with the whole line being printed over the first character of the line of text when printing PDFs. It has ruined a lot of work.
I'd try this:
Delete the current printer (reset the print system) Mac OS X: How to reset the printing system
Delete all other Canon software and utilities from your computer.
Do a factory reset on your printer
Use Software Update to download the driver from Apple.
Don't reinstall any other Canon Utilities.
Make sure you don't have something mechanical stopping the paper from advancing.
If the problem is really the driver, then you could look in Gutenprint for a different driver. Gutenprint for Mac OS X -
Can anyone explain how to correct printing when only the first page prints?
I am having a problem printing pdf document. I am using Adobe Acrobat X, MacBook Air. The first page of the pdf will print, but the remaining pages of the document do not. I occurs on multiple printers. I have tried "Print as Image" and that works, but I want to be able to print without having to use Print as Image.
Let us know which specific USB model you have.
Normally when someone receives a USB modem error there are only a few places to look for solutions. First would be a reinstall of the connection software. Always go out to VZW and check to see if there is a newer version when you have problems. Even if there isn't a reinstall can clear up many temporary problems with these devices.
Your error mentions something about connecting to LTE. Perhaps there is an issue with the authentication of your device. It might be a good idea to contact VZW to make sure you are properly registered. You also might want to try connecting in a different location incase there is something wrong with your current environment. Connecting to a different tower or in a different location may be able to work around the problem. -
When printing a highlighted (selected) print range from an internet item pulled up through Firefox, the first line of the selected range is not printing or is partially cut off. This is not an issue with my printer, as printer prints the whole selected print range when using Internet Explorer or Word Doc applications. The problem only happens when using Firefox. Please advise on how to fix this. Is this a settings issue or do I need to download and update? Thx
* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working. -
Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.
-
Smart print worked great on first use now only generates a blank page
Using IE8 on XP Pro SP3. Installed Smart Print(SP). Activated. Opened new IE browser session. Got web page I wanted to print. Hit Smart Print(SP) button. Exact text wanted was select by SP. Hit Print Preview. All selected text present on PP. Printed.
Got next page. Hit SP. Exact text again selected. Hit PP. Got preview with Header-Footer only. Hit Print. Same Header-footer printed.
Closed all IE browser sessions.
Opened new IE browser session. Got page to print. Hit SP. Exact text selected by SP. Hit PP. Still got preview with Header-Footer only. Print same also.
Used >>File>Print Preview. All of printable webpage on PP...just not with SP?Hello Dave,
Its nice to see such a explanatory question. As per my understanding of your problem, event on sort begin triggers for the first record of the internal table and making the flag as TRUE. So you just put another condition in the COMMAND node as SY-TABIX NE 1. So it skips for the first record.
COMMAND generate a new page if condition new page switch = TRUE " & SY-TABIX NE 1 -
When I send pdf files to my iPhone 6 , I am only able to see the first page of the pdf file.
When I send pdf files to my iPhone 6 plus (IOS 8.1.2), I am only able to see the first page of the pdf when I open the attachment on the phone.
Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!
Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.
-
How do I loop back from the first frame to the last frame?
Hi there,
I'm currently working on the framework for a product viewer.
I have:
a movie clip called 'viewer_mc' which contains the images take from different angles of the product. The actionscript generates a script on the last frame of this that returns it to frame 1.
a button instance called 'autoplay_btn' which plays through the movie clip from whatever the current frame is, and stops on frame 1.
a left and right button which serve to move the movie clip frame, to give the appearance that the product is rotating.
I have succeeded in getting it to:
have the movie clip play through once, return to frame 1 and stop.
have the buttons return functions when held down, that move the frame in the movie clip using nextFrame and prevFrame commands. The right button successfully loops round to frame 1 and continues functioning to give the appearance of continual rotation.
The last problem I am experiencing is getting the left button to act in the corresponding manner, going from the first frame to the last and continuing to function.
Here is my actionscript so far:
import flash.events.MouseEvent;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
1. This is the part that gets it to play through once before returning to the first frame. I think perhaps the problem I am experiencing is because of the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' part i.e. although I'm holding the left button, its returning to this script and therefor getting bounced back immediately to the first frame. However, there is no flicker on the screen which you might expect if this were the case
Note - as this is a generic product viewer which I can use as a template I am using lastFrame etc. as opposed to typing the value in
function toStart (){
viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
2. This is the functionality for the autoplay_btn that will play through a rotation / return the viewer to the initial (frontal) view of the product (frame 1).
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
var startFrame:Number = viewer_mc.currentFrame;
viewer_mc.gotoAndPlay(startFrame);
3. This is the functionality of the right button, which when held, moves the movie clip to the next frame via the 'rotateRight' function based on the 'nextFrame' command. It loops back round to the first frame due to the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' script generated on the last frame of the movie clip, as is desired.
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
viewer_mc.nextFrame();
4. This is the functionality of the left button, which when held, moves the movie clip to the prev frame via the 'rotateRight' function based on the 'prevFrame' command. And this is where the problem lies, as although it works for getting the movieclip back to frame 1, it does not loop round to the last frame and continue functioning, as is wanted.
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateLeft); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
I'd imagine it is probably my logic for this part that is really letting me down - I can do a similar function in actionscript 2, but am trying to learn actionscript 3 just to move with the times as it were, and struggling a bit. Still this is only a few days in!
function rotateLeft(e:Event):void{
if(thisFrame==1){
gotoAndStop(viewer_mc.totalFrames-1);
} else{
viewer_mc.prevFrame();
Any help you can give me would be gratefully received. For an example of the effect I am trying to achieve with the autoplay button etc. I recommend:
http://www.fender.com/basses/precision-bass/american-standard-precision-bassThanks for getting back to me.
Here's the code without my comments / explanations:
import flash.events.MouseEvent;
import flash.events.Event;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
function toStart (){
viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
//last image of viewer_mc = first image of viewer_mc
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
var startFrame:Number = viewer_mc.currentFrame;
viewer_mc.gotoAndPlay(startFrame);
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
viewer_mc.nextFrame();
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateLeft);//while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
function rotateLeft(e:Event):void{
viewer_mc.prevFrame();
The definition of the rotateLeft function is where the problem lies I think - I've taken out my poor attempts at doing the logic from the previous post. If I were to write it out long-hand the statement I want to write is: 'If you get to frame 1 and function rotateLeft is called go to the end of the movie clip'.
The reason I have to use the viewer_mc.totalFrames-1 definition in the addFrameScript call is the addFrameScript function is 0 based i.e. if you want to call frame 1 of the movieclip you have to return a value of 0 in the addFrameScript (or such is my understanding of it anyway). As such, the last image in the movie clip will need to be the view obtained at 360 degree rotation, which is of course the same view as at 0 degree rotation. As a consequence, the last frame in the movie clip is superfluous for the user, but necessary for the overall effect to be achieved. And, in addition, to keep up the effect of a 360 degree view when the rotateLeft function is called it needs to skip that last frame to go to the lastFrame-1 (or totalframes-1), or in other words, the view of the image prior to completing the full 360 rotation.
the variables thisFrame and lastFrame are defined at the very top of the script. Like you said they might need to be defined or called on again elsewhere. -
I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/ -
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Conditional formula to supress a section in the first page of the report
hi all,
how to programatically add a conditional formula to supress a section only on the first page of the report.
i am using CR XI R2 RAS server.
thanks in advance
Padmanaban VHi Padmanaban,
You can download samples from [here|https://www.sdn.sap.com/irj/boc/businessobjects-samples]
Regards,
Shweta
Maybe you are looking for
-
Yet another customer with Photoshop CC crashing on opening!
Hi Photoshop CC keeps closing as soon as it opens on my PC. I have installed, uninstalled and reinstalled over five times since starting my subscription to CC two days ago, to no avail. I have thoroughly cleaned my PC, followed all the advice I can f
-
Hi everyone: My Time Machine disk is a 1TB drive on my Mac Pro. It backs up my other three 250 GB Disks on the same computer (one being my Macintosh HD) . It is full and is starting to erase the oldest backups (from 2 years ago). My understanding
-
ITEM INTREST NOT UPDATATING THE G/L ACCOUNTS?
hi I HAVE BEEN TRYING TO POST THE INTREST ON ARREARS THROUGH T CODE F.24 I COULD ABLE TO VIEW THE INTREST BUT IT IS NOT BEING UPDATED IN GL ACCOUNTS AND SUNDRY DEBTORS INDIVIDUAL BALANCES. CAN SOMEBODY HELP ME? i did all configuration steps, IN OBV1
-
helo, i have my iphone a good year, working great but now the ear speaker has a poor sound when i get a phone call. I can't hear what they say. I try to hard reset but doesn't work. I've tried a total restore and it's still the same. Can somebody hel
-
Not showing any partitions in the cube
Hi All I created partition for the cube , im not seeing the partition in trgt cube even its not showing source database and target database under the partition I refreshed the partition so how can i solve this , plz help on this Thanks