Printer doesn't operate correctly w/firefox

printer is very slow when using firefox, but not when using internet explorer.
== This happened ==
Every time Firefox opened
== i installed new hpf4400 deskjet printer

I have an HP Photosmart 7960. When I want to print something from an email, it doesn't print it all. If, for example, I print or attempt to print a schedule, it would miss who is on the schedule but have the time of this person that is scheduled. It would print only parts of it.
Also, I used to be able to transfer pictures from the card from a camera into a port from the printer and on to the computer. Right now, the printer doesn't allow that. A message in red comes on stating the printer does not recognize the computer.
Sorry I wasn't very explicit before.
Deanculvert

Similar Messages

Swalife websight doesn't operate correctly on one of our computers and works fine on the other

We have two Dell laptops. For explanation of this problem, I will refer to them as #1 and #2. I have used Firefox on #1 for 3 years now. Our other computer, #2 has been using IE, but because of IE issues, we decided to switch it to FF also. It is necessary for us to use swalife.com website for work. When I log in to swa life on #1 it works fine as it always has. We downloaded FF 18.0 on #2 and the swalife site only has partial functionality. We can log in to the site on #2 and it recognizes the names and passwords, but will not open the default opening page. The default page has 4 tabs, news, need to know, swa pics, and profiles. The only tab out of the three that works correctly is the need to know tab. The other three have a window that opens that displays the following message:
This Connection is Untrusted
You have asked Firefox to connect
securely to blog.swalife.com, but we can't confirm that your
connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
blog.swalife.com uses an invalid security certificate.
The certificate is not trusted because no issuer chain was provided.
(Error code: sec_error_unknown_issuer)
Yesterday I contacted Norton security. They took control of #2 and said that it wasn't a security problem and that they couldn't fix it. He suggested using Chrome, since swalife.com operated fine with chrome on #2. That is not the solution I wanted. We also contacted Tech Support at swalife and they had no idea what the problem could be. My question to you is...if swalife.com operates correctly on#1 with FF18.0, why can't #2 operate on FF18.0? Both computers are in the same room, using the same router, and are on the same Insight cable connection. I have checked and compared security settings on both computers and both appear to be identical. Please note, that in the Untrusted window it says that "You have asked FF to connect securely to blog.swalife.com but we can't confirm that your connection is secure." We are not asking to connect to blog.swalife. We never use it. The site sends us to this window directly from the log on page.
Please Help
Larry Krauss
[email protected]
614-448-8035

The blog.swalife.com server doesn't send a required intermediate certificate.
You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/
You can Copy and Paste the certificate text of the intermediate certificate (COMODO High-Assurance Secure Server CA) to a .cer text file and import the certificate in the Certificate Manager or use Firefox > New Tab > Open File.
DO NOT set any trust bits, those are only required for root certificates and should never be set for intermediate certificates.

Since downloading Mtn.Lion my epson printer doesn't work correctly & the entire system seems to be slower plus my iMac now disconnects from my wifi every time the mac sleeps. Can anyone help me with these issues?

I am having problems with my Imac (approx 1 yr old) every since I downloaded (from the App.Store) Mountain Lion. I am a working mom with 3 toddlers.....I have very little time to work on the computer which I primarily use for photograhpy needs. I am not computer savvy enough to figure out how to "fix" the new issues/problems and am frustrated. I am hoping someone can help me........
Issues just since downloading Mountain Lion:
1) My Epson R2400 printer is not printing properly. It wouldnt print at all from CS5 the first 2 days. Then just started printing. The prints aren't nearly as good as they used to be. I just installed Photoshop Elements 10 and have been able to print but the prints are just awful. I printed a test page and it was perfect. I've triple checked the settings in the print dialogue box to ensure the correct paper is chosen, etc. I've never let the printer manage the color before but it is the only option that gives a mediocre print at best.
     I've gone to Epson.com.   It says to update driver through Apple for Mtn. Lion. According to my computer I have no updates. Printer is connected via USB. Changed the ports, turned printer on & off. Emailed epson & they said to reset the print queue, which I did. Restarted the IMac Still no luck. (The error message I got when trying to print from CS5 is "filter failed." But, as stated before it just started printing today as I was typing this.
      I print out pics quite a bit and it seems the only time I have ever had problems is when I upgraded the OSX system. Why is that?? When I upgraded to 10.7 is when I first realized my print quality went down.
2) Now every time I "wake" up my computer it has become offline and has to go through the steps to reconnect to my wifi. Never did that before Mtn.Lion. I purchased the Airport Extreme Dec 2011. My computer was always connected before the update. Now I have to scroll down & pick my network & wait for it to connect before proceeding.   I double checked preferences and it is set up to check for updates automatically. What is that about??
3) It just seems that my system overall is slower. I love my mac but I am frustrated because I don't have the free time needed to do all this problem solving. I just need it to work properly when I have a few minutes to work on a picture. I imagine there are other issues, but these are the only 2 areas I've focused on since the upgrade.
I've read different views/feedback on Mtn Lion but haven't come across the printer issue or the wifi connection issue.
Can anyone direct me towards a solution? I really appreciate it!
T

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Satellite U200-122: Fingerprint Software doesn't work correctly with Firefox

When I first installed Firefox on my U200-122, everything worked fine. LogIn on different sites by fingerprint was no problem.
After an firefox update the problems began. Instead of filling in my username and pw, Fingerprint software popups and asks whether I'd like to register the site (which I did long before).
In Fingerprint setup FF 2.0.0.6 ist correctly installed. If I remove FF from this setup, exit, restart setup and re-enter FF, it all works fine....until next reboot. I tried to install the latest version of fingerprint software - didn't help.
Any ideas ?
Thanks.,
markus

There is no solution like Fingerprint Utility update or something like that!!
The solution is that you have to remove and to reinstall the Firefox again to get it working with the Fingerprint utility!!!
The Firefox update damages the Fingerprint registration in the FF and therefore the new reinstallation is necessary!
If you want to know how this will be fixed in the FireFox browser please contact the Mozilla support or the developer!!

Adobe PDF printer doesn't work correctly.

I have installed Adobe Acrobat X Pro. But when I try to convert a document to a PDF file using PDF printer a progress bar appears. But then nothing happens.

Hi Anubha,
This problem happens with every kind of file types (Eg. .doc, .txt, .jpg).
This printer worked very well earlier. I got this problem suddenly. Not sure what is the reason. Tried re-installing Adobe, but doesn't work.
I used 'File> Print> Printer> Adobe PDF' option to create pdf files. (Eg. In MS Word, Notepad, and etc.)
Thank you for your reply.
Udaya.

Connected to Wifi but internet doesn't operate correctly. Reoccurring*

Hi everyone,
So this problems happens about every other month now. I'll be browsing the internet then all of a sudden the page wont load. I'll be staring at my browser for 10mins then I get the notice "This web page is not available" this whole time I'm connected to my wifi. But the catch is I'd turn off my wifi, then reconnect and browse the internet and it would work fine load pages really quickly, the weird part is after reconnecting for about 4mins of browsing it would act up again, but sometimes it would work for 30mins then act up. This is starting to become very frustrating. I've called multiple times to my internet provider and on their end nothing seems to be wrong. I've also just talked to apple support and they weren't that much help because they kept making me disconnect from my wifi, then reconnect to my wifi then ask me "how is your browser doing now?" when I already tell them the moment I disconnect then reconnect my browser works fine, it's happens mid-browsing which is so annoying. Anyone know what's wrong with my Mac?
Here's some of my info
Macbook pro
OS X 10.8.5
happens to both google chrome and safari

Despite the connection indication you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Print preview and print doesn't show the correct out put result when i connnected with EPSON LX-300+II

I hava an html webpage with css & print css. The print preview and print doesn't give correct output there is alignment problem when i connected with EPSONLX-300+II. But iam connected with hp laserjet they show the correct output with firefox. Please fix the problem as soon.....

I have same problem as you, but later I know how to deal with it.
1. change your print default preferences to
print quality into (120x144 dpi, or other which suites you)
mine goes well to 120x144 dpi
2. Before print enter File->Page setup, set true to option shrink to page width
in order to fit your page into your desired paper
(firefox will resize your content to suit the paper you choose).
If you dont want this you can disable this option.
3. Still in Page Setup, if checkbox "Print background (color & images)" is unchecked then
white text will be printed black.
Set this checked if you want to print white text as it is color.
I hope it answers your question.
Steve
http://www.dailymobilegames.com

Youtube doesn't display correctly since I installed latest version of firefox

youtube doesn't display correctly anymore...adobe flash has been updated and java is enabled. This is what it looks like now...
"Loading...
Videos
Music
Shows
Trailers
Live
All Categories
Categories "

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My EPSON printer doesn't print correctly the colors

Hi, I've an EPSON Stylus Photo R200 installed on my MacBook (OSX 10.4.11)... From some days, my printer doesn't print correctly the colors: I lunched the utility application and I saw that the printer doesn't print the "light magenta" (that's the light pink I think); that's strange, because his inkjet refill is not empty. I tried to do the clean process, but it don't start because there isn't enough ink in another two ink refill (yellow and light cyan, that aren't empty however).
Some ideas?
Message was edited by: Mac Shunsuke

I have similar issue before and it's really frustrated to use small capacity cartridges in my R200 and R280 printers. I ended up to get a very very decent ink system from InkRepublic.com
these two systems have been working for me for few years and I never ever have to worry about the ink cost and printing problem.
There are couple of good reviews and workflow here
http://www.inkrepublic.com/members/MikeSokol/review.asp
http://www.brandonstaggs.com/epson-r200-continous-ink-system-review/
epson R1900 and R1800 ink system review
http://www.inkrepublic.com/members/MerrittIsland/review.asp
hope this helps.

Linux ARM Softfloat JVM doesn't operate remainder operator correctly

I installed jdk-7u45-linux-arm-vfp-sflt.tar.gz (Linux ARM v6/v7 Soft Float ABI) on my pandaboard,
and found that remainder operator doesn't work correctly in case of floating-point operands.
For example, the result of
Double res = Math.random() * 100 % 1
is,
[In Case Of SDK for x86, or Linux ARM Hardfloat SDK]
0 < res < 1
[Case: Linux ARM Softfloat SDK]
1 < res < 100
Is this a specification for Softfloat version or a bug?

Sorry for necro, but I was wondering if you were able to resolve this issue. I'm also running ubuntu with xfce on an ARM chromebook.
I assume you used Ubuntu Software Center to install the version you had working. I noticed the same things you found in in the INI and tried some tweaks myself, playing around with different downloads of eclipse, but I can never get the .exe to do anything either.

Firefox4 cleared compnents.classes(cid) error, but Start page still does not load? just shows search bar that doesn't operate /load?

Loaded Firefox 4, received error message components.classes(cid), now corrected through help pages. But Firefox Start Page only shows a Search bar, that doesn't operate, page does not carry any other information, presume it's not downloading correctly, any ideas??

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
See:
* [[Troubleshooting extensions and themes]]

When is the right click print function going to work with Firefox 4

Right click print function quit working when I updated to Firefox 4

Firefox has never had a right-click Print menu item by default. If you had that with an earlier version of Firefox, it was added by an extension that you installed and isn't 4.0 compatible right now.
I have been using this extension for that feature, for many years. - https://addons.mozilla.org/en-US/firefox/addon/printprint-preview/ - It hasn't been updated for Firefox 4.0 versions yet, so I am using this one temporarily to get a Print Preview option in the Contextual Menus. - https://addons.mozilla.org/en-US/firefox/addon/print-edit/ - The Print function is in the Print Preview window. That extension also allows you to edit what is going to be printed, so you can get rid of advertisements, empty multimedia boxes (Firefox won't print Flash or WMP content), and other stuff you don't want on the printed page, to save ink and paper.
That may not be suitable to you as a replacement extension for what you had been using before, but I never print anything from Firefox before using Print Preview. I am tired of wasting ink and paper with Firefox not being able to correctly print web pages that every other web browser can print correctly. If the Print Preview doesn't look correct, I open that page in IE8, Opera11, or Safari 5.0.1 - all of which will print it correctly 99.9% of the time.

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

Print issue with ebay and latest Firefox

Just gone to the latest Firefox 37.0.01 and it is not printing ebay invoices/labels correctly - I print multiple invoices at a time and it prints out every other one - it only shows every other one in print Preview.
reverting back to an earlier firefox fixes this problem
Any fixes for the latest version?

It might have to do with a compatibility change, however I have found some alternative solutions from other forums. I would imagine it would vary on the printer.
A
Click "FILE" in the upper let corner
Go to : "PAGE SETUP"
Go to : 'MARGINS & HEADER / FOOTER" and adjust them.
B.
Try to download any available printer drivers available for the printer.
Also more recent posts in the ebay forums:
*[https://community.ebay.co.uk/t5/Seller-Central/Printing-multiple-invoices-Firefox-missing-pages/td-p/4227218]

BBC Cbeebies website doesn't display correctly

None of the smaller boxes on this page show up correctly in Firefox 3.5.9 on my Toshiba NB100 (Ubuntu 9.10). The larger "Watch and Listen" box appears, but the others just show as regular text instead of the graphical box with rounded corners.
These elements look like they come from the style sheet at http://www.bbc.co.uk/cbeebies/style/cbeebies_home.css, which references http://www.bbc.co.uk/cbeebies/img/home/meetpresenters.jpg.
By clearing the cache I can see that the cbeebies_home.css is loaded, but the meetpresenters.jpg isn't.
Any help on how I can resolve this is most appreciated.
== URL of affected sites ==
http://bbc.co.uk/cbeebies

You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Printer doesn't operate correctly w/firefox

Similar Messages

Maybe you are looking for