Printer Dosen't Work

it is wireless and was saying that the printer was offline when i plugged it in still was off line

A ghost printer, no doubt. Who you going to call?

Similar Messages

Hp laser jet 1102 printer dosen't work on remote desktop

i have a problem on printer HP laserjet 1102 on printing on remote desktop .
my printer connected to my computer and work ok but when i open anther computer remote it appear on it but not printing
if this printer dosen't support this option what is the model you advice me
many thanks for you

Try to run the print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041
Does it gives you an error message when you try to print from the remote desktop?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

HP LASERJET M1136 MULTIFUNCTION PRINTER-----SCANNER NOT WORKING

I HAVE RECENLTY PURCHASED HP LASERJET 1136 MFP. PRINTER IS WORKING FINE, BUT SCANNER IS NOT WORKING. HOWEVER PHOTOCOYING ACTION IS PERFECT. I GUESS THERE IS SOME ISSUE WITH THE DRIVER THING. CAN ANYONE PLEASE ASSIST ME FOR THIS???
I HAVE PREVIOUSLY OWNED DESKJET SERIES, IN WHICH SCANNING AND PRINTING BOTH WERE WORKING FINE.
THANKS IN ADVANCE.

Hi virendrapawar11,
Thank you for providing that information.
Are you signed is a the Administrator of that computer?
WIA drivers are part of Windows Operating System.
Run this Microsoft Fit It Tool to see if it will resolve this issue.
Diagnose and repair Windows File and Folder Problems automatically.
I have provided this document, just to make sure these are the same ones you had checked.
This document is to Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Temporarily turn of the Antivirus Software and try scanning again.
If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
Back up the registry first.
How to back up and restore the registry in Windows.
Restore Default Startup Type for Windows Image Acquisition (WIA).
Once the WIA is working properly agian on the computer, most likely you will have to uninstall and reinstall the printer software.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick

Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick?

Thank you for your response.
Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong.
I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working.
Do you have any other suggestions?

My Epsom Printer/Scanner not working since upgrading to Maverick,??

We have an fairly recent Epsom SX959WD scanner/printer, which was working fine until I upgraded our MAC Mini. OS to Maverick.
I did all the further software updates that popped up after installing Maverick, so I'm at a loss as to how to fix it & we really need to use it
Can anyone help please ???

Try resetting the printing system:

Gif imagen dosen't work at o.s 6.0

The gif imagen in profile bbmsn contactas dosen't work in my torch 9800 os 6.0 all my friends that have got the os 6.0 have goy the same proble, i wanna know if there are or when is coming a update to solution this problem

Hi,
the problem whit NI 9223 module and the example that you talk about is know. Indeed, there is a CAR - Corrective Action Request - #30724 that deals with the erroneous implementation of the example.
To improve the code, the owner of CAR, suggest:
Added pipelining loops and removed from FPGA VI to Increase maximum acquisition rate and modified host VI to implement proper DMA FIFO programming practices.
I try to implement and improve the code. Bye
Mario

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Printer no longer working after wireless network reset

OfficeJet Pro 8500A, MacBook Pro, running Mavericks.
Since 3 days ago, when we re-added a password and locked our wireless router (ATT modem, UVerse), our printer is "off-line" Print jobs queue up, but do not print. When I go in and check it says "printer off-line." Or in the print queue, it is something like "looking for printer."
It worked briefly when we found a cord and plugged it in to the laptop, but will not work wirelessly, which it was doing before. No changes except to re-do password for the network.
I have the manual and have turned everything off, then back on in the order recommened (router, then printer, then laptop). Still off-line. Can someone please help? Thank you!
This question was solved.
View Solution.

Hello @LindaGrace,
Welcome tot he HP Support Forums!
I understand that since re-adding a password to your wireless router your HP Officejet Pro 8500A e-All-in-One Printer is not communicating wirelessly with your Mac OS X 10.9 computer. I would like to assist you today with resolving this wireless communication issue.
Now, making a change to your network, such as a adding a password or altering a password, results in having to reconfigure your printer on the wireless network. At this point your printer is being 'blocked' access to your wireless network due to the change that you made. To correct this issue you simply rerun the wireless setup for your printer to 'tell' the printer the network name and password. Once the wireless setup is run successfully everything will continue working for you as per normal.
To run the Wireless Setup Wizard on your printer please follow the steps below.
On the printer touch screen, touch the Right Arrow () to display the second navigation screen.
Touch Network () to open the Network Menu screen.
Touch Wireless.
Touch Wireless Setup Wizard, and then touch Continue.
Wait while the printer searches for routers that are within range. The Select Network (SSID) menu displays.
Scroll down the list of network names until you find the name of your network.
Touch the name of your network.
If prompted, enter the WEP or WPA key. This is the password for your wireless. The password is case sensitive.
Wait for the printer to connect to the network
- Source
Once your printer is connected to your network again, please try to print. If printing still fails you may need to re-add the printer to your Mac because of the printers new network connection. Please follow the steps below to add the printer back to the Mac.
1. Click the Apple menu, and then click System Preferences.
2. Click Print & Scan, and then check if the name of your printer displays in the Printers list.
3. If your printer is already listed, remove and re-add the printer to confirm communication with the Mac. Click the name of your printer, click the minus sign (), and then delete the printer
4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer
5. Click Add to add the printer to the list.
Now that the printer is successfully configured on your network and added to the Mac please try wirelessly printing again.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Looking for a WiFi printer that will work with my Nexus WiFi hotspot

On a recommendation, we have bought an Epson NX530 WiFi-enabled printer. It does not work with the WiFi hotspot feature of my Galaxy Nexus. The support tech at Epson suggested that we get a WiFi router rather than trying to use the Galaxy Nexus. I told her that I would rather trash the NX530 and get a printer that would work with my phone.
So we have 3 questions:
1) does anyone know how to make an Epson NX530 work via the Galaxy Nexus hotspot?
2) does anyone know of a different WiFi enabled printer that works with the Galaxy Nexus?
3) does anyone know if the Galaxy Nexus is inherently unable to work with any WiFi printer?
Thanks,
Craig

This website should be able to assist you. http://www.galaxynexusforum.com/forum/galaxy-nexus-help/8520-wifi-printing.html I use an app called Printhand from the Google Play Store for my Android tablet and smart phones. I have a Canon Pixima 3220 that functions great. I also have a higher end HP Envy D410a that also works great with printhand. The Canon is cheap at BJ's at $40 when I bought it. The HP is about $269 at Staples and other outlets. Good Luck

WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer

All-in-one (OfficeJet or Inkjet) WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer.
Even if colour cartridge is over, w/o replacing I can still print with black cartridge.
Which printer is suitable.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

Printing No Longer Working After Recent Upgrade

My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4).
I discovered that arch is no longer auto-loading the parport_pc module. This is strange. If I run "hwdetect --show-modules", parport_pc is shown.
I do have MOD_AUTOLOAD="yes" in my rc.conf file.
The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
Are others having this problem?
Rob

I just read your post. I am sorry I could not join irc. I was actually at work. It is very hard for me to use irc at work. Firewalls make life difficult!
In any event, I think I solved the problem.
Please see http://bbs.archlinux.org/viewtopic.php?t=18747
Here is the complete post:
In my /etc/modprobe.conf file, there was the folloiwng line:
# Load lp support with parport_pc
install parport_pc modprobe -i parport_pc ; modprobe lp ; true
I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
The following are the remaining lines in my /etc/modprobe.conf:
# Load ppp-generic with modem drivers
install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
install slamr modprobe -i slamr ; modprobe ppp-generic ; true
install slusb modprobe -i slusb ; modprobe ppp-generic ; true
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
options isapnp=0 dma1=1 dma2=0 irq=5
# --- END: Generated by ALSACONF, do not edit. ---
The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
Should I also comment them all out?
Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
Rob

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Printer Dosen't Work

Similar Messages

Maybe you are looking for